Age | Commit message (Collapse) | Author | Files | Lines |
|
Long ago, in 97bfeb34df (Release pack windows before reporting out of
memory., 2006-12-24), we taught xmalloc() and friends to try unmapping
pack windows when malloc() failed. It's unlikely that his helps a lot in
practice, and it has some downsides. First, the downsides:
1. It makes xmalloc() not thread-safe. We've worked around this in
pack-objects.c, which installs its own locking version of the
try_to_free_routine(). But other threaded code doesn't.
2. It makes the system as a whole harder to reason about. Functions
which allocate heap memory under the hood may have farther-reaching
effects than expected.
That might be worth the tradeoff if there's a benefit. But in practice,
it seems unlikely. We're generally dealing with mmap'd files, so the OS
is going to do a much better job at responding to memory pressure by
dropping individual pages (the exception is systems with NO_MMAP, but
even there the OS can probably respond just as well with swapping).
So the only thing we're really freeing is address space. On 64-bit
systems, we have plenty of that to go around. On 32-bit systems, it
could possibly help. But around the same time we made two other changes:
77ccc5bbd1 (Introduce new config option for mmap limit., 2006-12-23) and
60bb8b1453 (Fully activate the sliding window pack access., 2006-12-23).
Together that means that a 32-bit system should have no more than 256MB
total of packed-git mmaps at one time, split between a few 32MB windows.
It's unlikely we have any address space problems since then, but we
don't have any data since the features were all added at the same time.
Likewise, xmmap() will try to free memory. At first glance, it seems
like we'd need this (when we try to mmap a new window, we might need to
close an old one to save address space on a 32-bit system). But we're
saved again by core.packedGitLimit: if we're going to exceed our 256MB
limit, we'll close an existing window before we even call mmap().
So it seems unlikely that this feature is actually doing anything
useful. And while we don't have reports of it harming anything (probably
because it rarely if ever kicks in), it would be nice to simplify the
system overall. This patch drops the whole try_to_free system from
xmalloc(), as well as the manual pack memory release in xmmap().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
My IEE 'home for life' email service is being withdrawn on 30 Sept 2019.
Replace with my new email domain.
I also have a secondary (backup) 'home for life' through
<philipoakley@dunelm.org.uk>.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Compilation fix.
* cb/xdiff-no-system-includes-in-dot-c:
xdiff: remove duplicate headers from xpatience.c
xdiff: remove duplicate headers from xhistogram.c
xdiff: drop system includes in xutils.c
|
|
Compilation fix.
* jk/no-system-includes-in-dot-c:
wt-status.h: drop stdio.h include
verify-tag: drop signal.h include
|
|
Doc update.
* sg/fsck-config-in-doc:
Documentation/git-fsck.txt: include fsck.* config variables
|
|
The internal diff machinery can be made to read out of bounds while
looking for --funcion-context line in a corner case, which has been
corrected.
* jk/xdiff-clamp-funcname-context-index:
xdiff: clamp function context indices in post-image
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* bc/hash-independent-tests-part-4:
t0000: reword comments for "local" test
t: decrease nesting in test_oid_to_path
|
|
Leakfix.
* rs/plug-strbuf-reak-in-read-alt-refs:
sha1-file: release strbuf after use
|
|
Leakfix.
* mt/dir-iterator-updates:
test-dir-iterator: use path argument directly
dir-iterator: release strbuf after use
|
|
Leakfix.
* ds/commit-graph-incremental:
commit-graph: release strbufs after use
|
|
A few messages have been updated to help localization better.
* ja/l10n-fixes:
l10n: reformat some localized strings for v2.23.0
|
|
"merge-recursive" hit a BUG() when building a virtual merge base
detected a directory rename.
* en/disable-dir-rename-in-recursive-merge:
merge-recursive: avoid directory rename detection in recursive case
|
|
Docfix.
* nd/switch-and-restore:
restore: fix typo in docs
|
|
Docfix.
* mr/doc-can-not-to-cannot:
doc: typo: s/can not/cannot/ and s/is does/does/
|
|
commit-graph did not handle commits with more than two parents
correctly, which has been corrected.
* ds/commit-graph-octopus-fix:
commit-graph: fix bug around octopus merges
|
|
Commit 01d3a526ad (t0000: check whether the shell supports the "local"
keyword, 2017-10-26) added a test to gather data on whether people run
the test suite with shells that don't support "local".
After almost two years, nobody has complained, and several other uses
have cropped up in test-lib-functions.sh. Let's declare it acceptable to
use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t1410.3 ("corrupt and checks") fails when run using dash versions
before 0.5.8, with a cryptic message:
mv: cannot stat '.git/objects//e84adb2704cbd49549e52169b4043871e13432': No such file or directory
The function generating that path:
test_oid_to_path () {
echo "${1%${1#??}}/${1#??}"
}
which is supposed to produce a result like
12/3456789....
But a dash bug[*] causes it to instead expand to
/3456789...
The stream of symbols that makes up this function is hard for humans
to follow, too. The complexity mostly comes from the repeated use of
the expression ${1#??} for the basename of the loose object. Use a
variable instead --- nowadays, the dialect of shell used by Git
permits local variables, so this is cheap.
An alternative way to work around [*] is to remove the double-quotes
around test_oid_to_path's return value. That makes the expression
easier for dash to read, but harder for humans. Let's prefer the
rephrasing that's helpful for humans, too.
Noticed by building on Ubuntu trusty, which uses dash 0.5.7.
[*] Fixed by v0.5.8~13 ("[EXPAND] Propagate EXP_QPAT in subevalvar, 2013-08-23).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid allocating and leaking a strbuf for holding a verbatim copy of the
path argument and pass the latter directly to dir_iterator_begin()
instead.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since commit 8c8e5bd6eb33 ("merge-recursive: switch directory
rename detection default", 2019-04-05), the default handling with
directory rename detection was to report a conflict and leave unstaged
entries in the index. However, when creating a virtual merge base in
the recursive case, we absolutely need a tree, and the only way a tree
can be written is if we have no unstaged entries -- otherwise we hit a
BUG().
There are a few fixes possible here which at least fix the BUG(), but
none of them seem optimal for other reasons; see the comments with the
new testcase 13e in t6043 for details (which testcase triggered a BUG()
prior to this patch). As such, just opt for a very conservative and
simple choice that is still relatively reasonable: have the recursive
case treat 'conflict' as 'false' for opt->detect_directory_renames.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 1771be90 "commit-graph: merge commit-graph chains" (2019-06-18),
the method sort_and_scan_merged_commits() was added to merge the
commit lists of two commit-graph files in the incremental format.
Unfortunately, there was an off-by-one error in that method around
incrementing num_extra_edges, which leads to an incorrect offset
for the base graph chunk.
When we store an octopus merge in the commit-graph file, we store
the first parent in the normal place, but use the second parent
position to point into the "extra edges" chunk where the remaining
parents exist. This means we should be adding "num_parents - 1"
edges to this list, not "num_parents - 2". That is the basic error.
The reason this was not caught in the test suite is more subtle.
In 5324-split-commit-graph.sh, we test creating an octopus merge
and adding it to the tip of a commit-graph chain, then verify the
result. This _should_ have caught the problem, except that when
we load the commit-graph files we were overly careful to not fail
when the commit-graph chain does not match. This care was on
purpose to avoid race conditions as one process reads the chain
and another process modifies it. In such a case, the reading
process outputs the following message to stderr:
warning: commit-graph chain does not match
These warnings are output in the test suite, but ignored. By
checking the stderr of `git commit-graph verify` to include
the expected progress output, it will now catch this error.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: William Chargin <wchargin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"Can not" suggests one has the option to not do something, whereas
"cannot" more strongly suggests something is disallowed or impossible.
Noticed "can not", mistakenly used instead of "cannot" in git help
glossary, then ran git grep 'can not' and found many other instances.
Only files in the Documentation folder were modified.
'Can not' also occurs in some source code comments and some test
assertion messages, and there is an error message and translation "can
not move directory into itself" which I may fix and submit separately
from the documentation change.
Also noticed and fixed "is does" in git help fetch, but there are no
other occurrences of that typo according to git grep.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* sg/fsck-config-in-doc:
Documentation/git-fsck.txt: include fsck.* config variables
|
|
Support building Git with Visual Studio
The bits about .git/branches/* have been dropped from the series.
We may want to drop the support for it, but until that happens, the
tests should rely on the existence of the support to pass.
* js/visual-studio: (23 commits)
git: avoid calling aliased builtins via their dashed form
bin-wrappers: append `.exe` to target paths if necessary
.gitignore: ignore Visual Studio's temporary/generated files
.gitignore: touch up the entries regarding Visual Studio
vcxproj: also link-or-copy builtins
msvc: add a Makefile target to pre-generate the Visual Studio solution
contrib/buildsystems: add a backend for modern Visual Studio versions
contrib/buildsystems: handle options starting with a slash
contrib/buildsystems: also handle -lexpat
contrib/buildsystems: handle libiconv, too
contrib/buildsystems: handle the curl library option
contrib/buildsystems: error out on unknown option
contrib/buildsystems: optionally capture the dry-run in a file
contrib/buildsystems: redirect errors of the dry run into a log file
contrib/buildsystems: ignore gettext stuff
contrib/buildsystems: handle quoted spaces in filenames
contrib/buildsystems: fix misleading error message
contrib/buildsystems: ignore irrelevant files in Generators/
contrib/buildsystems: ignore invalidcontinue.obj
Vcproj.pm: urlencode '<' and '>' when generating VC projects
...
|
|
Hotfix for making "git log" use the mailmap by default.
* jc/log-mailmap-flip-defaults:
log: really flip the --mailmap default
log: flip the --mailmap default unconditionally
|
|
The recently added [includeif "onbranch:branch"] feature does not
work well with an early config mechanism, as it attempts to find
out what branch we are on before we even haven't located the git
repository. The inclusion during early config scan is ignored to
work around this issue.
* js/early-config-with-onbranch:
config: work around bug with includeif:onbranch and early config
|
|
Update the docs, test the interaction between the new default,
configuration and command line option, in addition to actually
flipping the default.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Squelch unneeded and misleading warnings from "repack" when the
command attempts to generate pack bitmaps without explicitly asked
for by the user.
* jk/repack-silence-auto-bitmap-warning:
repack: simplify handling of auto-bitmaps and .keep files
repack: silence warnings when auto-enabled bitmaps cannot be built
t7700: clean up .keep file in bitmap-writing test
|
|
* jk/sort-iter-test-output:
t: sort output of hashmap iteration
|
|
* jc/dir-iterator-test-fix:
test-dir-iterator: do not assume errno values
|
|
Update to the tests to help SHA-256 transition continues.
* bc/hash-independent-tests-part-4:
t2203: avoid hard-coded object ID values
t1710: make hash independent
t1007: remove SHA1 prerequisites
t0090: make test pass with SHA-256
t0027: make hash size independent
t6030: make test work with SHA-256
t5000: make hash independent
t1450: make hash size independent
t1410: make hash size independent
t: add helper to convert object IDs to paths
|
|
Fix the spelling of the new "--no-show-forced-updates" option that "git
fetch/pull" learned. Similarly, spell "--function-context" correctly and
fix a few typos, grammos and minor mistakes.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
RelNotes/2.21.1: typofix
|
|
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It turns out that being cautious to warn against upcoming default
change was an unpopular behaviour, and such a care can easily be
defeated by distro packagers to render it ineffective anyway.
Just flip the default, with only a mention in the release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 07b2c0eacac (config: learn the "onbranch:" includeIf condition,
2019-06-05), there is a potential catch-22 in the early config path: if
the `include.onbranch:` feature is used, Git assumes that the Git
directory has been initialized already. However, in the early config
code path that is not true.
One way to trigger this is to call the following commands in any
repository:
git config includeif.onbranch:refs/heads/master.path broken
git help -a
The symptom triggered by the `git help -a` invocation reads like this:
BUG: refs.c:1851: attempting to get main_ref_store outside of repository
Let's work around this, simply by ignoring the `includeif.onbranch:`
setting when parsing the config when the ref store has not been
initialized (yet).
Technically, there is a way to solve this properly: teach the refs
machinery to initialize the ref_store from a given gitdir/commondir pair
(which we _do_ have in the early config code path), and then use that in
`include_by_branch()`. This, however, is a pretty involved project, and
we're already in the feature freeze for Git v2.23.0.
Note: when calling above-mentioned two commands _outside_ of any Git
worktree (passing the `--global` flag to `git config`, as there is
obviously no repository config available), at the point when
`include_by_branch()` is called, `the_repository` is `NULL`, therefore
we have to be extra careful not to dereference it in that case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Compilation fix.
* cb/xdiff-no-system-includes-in-dot-c:
xdiff: remove duplicate headers from xpatience.c
xdiff: remove duplicate headers from xhistogram.c
xdiff: drop system includes in xutils.c
|
|
Compilation fix.
* jk/no-system-includes-in-dot-c:
wt-status.h: drop stdio.h include
verify-tag: drop signal.h include
|
|
Commit 7328482253 (repack: disable bitmaps-by-default if .keep files
exist, 2019-06-29) taught repack to prefer disabling bitmaps to
duplicating objects (unless bitmaps were asked for explicitly).
But there's an easier way to do this: if we keep passing the
--honor-pack-keep flag to pack-objects when auto-enabling bitmaps, then
pack-objects already makes the same decision (it will disable bitmaps
rather than duplicate). Better still, pack-objects can actually decide
to do so based not just on the presence of a .keep file, but on whether
that .keep file actually impacts the new pack we're making (so if we're
racing with a push or fetch, for example, their temporary .keep file
will not block us from generating bitmaps if they haven't yet updated
their refs).
And because repack uses the --write-bitmap-index-quiet flag, we don't
have to worry about pack-objects generating confusing warnings when it
does see a .keep file. We can confirm this by tweaking the .keep test to
check repack's stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on various config options, a full repack may not be able to
build a reachability bitmap index (e.g., if pack.packSizeLimit forces us
to write multiple packs). In these cases pack-objects may write a
warning to stderr.
Since 36eba0323d (repack: enable bitmaps by default on bare repos,
2019-03-14), we may generate these warnings even when the user did not
explicitly ask for bitmaps. This has two downsides:
- it can be confusing, if they don't know what bitmaps are
- a daemonized auto-gc will write this to its log file, and the
presence of the warning may suppress further auto-gc (until
gc.logExpiry has elapsed)
Let's have repack communicate to pack-objects that the choice to turn on
bitmaps was not made explicitly by the user, which in turn allows
pack-objects to suppress these warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|