| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is currently a wrapper around init_grep_defaults(), but will allow
adding more initialization in further patches.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The underlying machinery is well-tested, but the configuration option
itself was tested only in t3400-rebase.sh.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description was misleading, since "set to any boolean value" include
"set to false", and diff.renames=false does not enable basic detection,
but actually disables it. Also, document that diff.renames only affects
Porcelain.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-svn has not supported GIT_SVN_NO_OPTIMIZE_COMMITS for
the "set-tree" sub-command in 9 years since commit 490f49ea5899
("git-svn: remove optimized commit stuff for set-tree").
So remove this target and TSVN variable to avoid confusion.
ref: http://mid.gmane.org/56C9B7B7.7030406@f2.dion.ne.jp
Helped-by: Kazutoshi Satoda <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
* js/git-remote-add-url-insteadof-test:
t5505: 'remote add x y' should work when url.y.insteadOf = x
|
|
* jk/config-include:
git-config: better document default behavior for `--include`
|
|
* ew/connect-verbose:
t5570: add tests for "git {clone,fetch,pull} -v"
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Paths that have been told the index about with "add -N" are not
quite yet in the index, but a few commands behaved as if they
already are in a harmful way.
* nd/ita-cleanup:
grep: make it clear i-t-a entries are ignored
add and use a convenience macro ce_intent_to_add()
blame: remove obsolete comment
|
|
* pw/completion-stash:
completion: fix mis-indentation in _git_stash()
|
|
The documentation for "git clean" has been corrected; it mentioned
that .git/modules/* are removed by giving two "-f", which has never
been the case.
* mm/clean-doc-fix:
Documentation/git-clean.txt: don't mention deletion of .git/modules/*
|
|
The vimdiff backend for "git mergetool" has been tweaked to arrange
and number buffers in the order that would match the expectation of
majority of people who read left to right, then top down and assign
buffers 1 2 3 4 "mentally" to local base remote merge windows based
on that order.
* dw/mergetool-vim-window-shuffle:
mergetool: reorder vim/gvim buffers in three-way diffs
|
|
* ah/stripspace-optstring:
stripspace: call U+0020 a "space" instead of a "blank"
|
|
* 'ks/svn-pathnameencoding-4' of git://git.bogomips.org/git-svn:
git-svn: apply "svn.pathnameencoding" before URL encoding
git-svn: enable "svn.pathnameencoding" on dcommit
git-svn: hoist out utf8 prep from t9129 to lib-git-svn
|
|
* pw/completion-stash:
completion: fix mis-indentation in _git_stash()
|
|
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The conversion from "svn.pathnameencoding" to UTF-8 should be applied
first, and then URL encoding should be applied on the resulting UTF-8
path. The reversed order of these transforms (used before this fix)
makes non-UTF-8 URL which causes error from Subversion such as
"Filesystem has no item: '...' path not found" when sending a rename (or
a copy) from non-ASCII path.
[ew: t9115 test case added (requires SVN_HTTPD_PORT set to test),
squash LC_ALL=$a_utf8_locale export from Kazutoshi for Cygwin]
Signed-off-by: Kazutoshi SATODA <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Without the initialization of $self->{pathnameencoding}, conversion in
repo_path() is always skipped as $self->{pathnameencoding} is undefined
even if "svn.pathnameencoding" is configured.
The lack of conversion results in mysterious failure of dcommit (e.g.
"Malformed XML") which happen only when a commit involves a change on
non-ASCII path.
[ew: add test case to t9115,
squash LC_ALL=$a_utf8_locale export from Kazutoshi for Cygwin]
Signed-off-by: Kazutoshi SATODA <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
We will be reusing this in t9115.
Suggested-by: Kazutoshi Satoda <k_satoda@f2.dion.ne.jp>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
* maint:
Start preparing for 2.7.2
git-cvsserver.perl: fix typo
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The vimdiff backend for "git mergetool" has been tweaked to arrange
and number buffers in the order that would match the expectation of
majority of people who read left to right, then top down and assign
buffers 1 2 3 4 "mentally" to local base remote merge windows based
on that order.
* dw/mergetool-vim-window-shuffle:
mergetool: reorder vim/gvim buffers in three-way diffs
|
|
* ah/stripspace-optstring:
stripspace: call U+0020 a "space" instead of a "blank"
|
|
The documentation for "git clean" has been corrected; it mentioned
that .git/modules/* are removed by giving two "-f", which has never
been the case.
* mm/clean-doc-fix:
Documentation/git-clean.txt: don't mention deletion of .git/modules/*
|
|
Some calls to strcpy(3) triggers a false warning from static
analysers that are less intelligent than humans, and reducing the
number of these false hits helps us notice real issues. A few
calls to strcpy(3) in "git rerere" that are already safe has been
rewritten to avoid false wanings.
* jk/rerere-xsnprintf:
rerere: replace strcpy with xsnprintf
|
|
Some calls to strcpy(3) triggers a false warning from static
analysers that are less intelligent than humans, and reducing the
number of these false hits helps us notice real issues. A few
calls to strcpy(3) in test-path-utils that are already safe has
been rewritten to avoid false wanings.
* jk/test-path-utils-xsnprintf:
test-path-utils: use xsnprintf in favor of strcpy
|
|
The "user.useConfigOnly" configuration variable can be used to
force the user to always set user.email & user.name configuration
variables, serving as a reminder for those who work on multiple
projects and do not want to put these in their $HOME/.gitconfig.
* da/user-useconfigonly:
ident: add user.useConfigOnly boolean for when ident shouldn't be guessed
fmt_ident: refactor strictness checks
|
|
The automatic typo correction applied to an alias was broken
with a recent change already in 'master'.
* nd/clear-gitenv-upon-use-of-alias:
restore_env(): free the saved environment variable once we are done
git: simplify environment save/restore logic
git: protect against unbalanced calls to {save,restore}_env()
git: remove an early return from save_env_before_alias()
|
|
An earlier adjustment of test mistakenly used write_script
to prepare a file whose exact content matters for the test;
reverting that part fixes the breakage for those who use
SHELL_PATH that is different from /bin/sh.
* mg/mingw-test-fix:
t9100: fix breakage when SHELL_PATH is not /bin/sh
|
|
Test scripts have been updated to remove assumptions that are not
portable between Git for POSIX and Git for Windows, or to skip ones
with expectations that are not satisfiable on Git for Windows.
* js/mingw-tests: (21 commits)
gitignore: ignore generated test-fake-ssh executable
mingw: do not bother to test funny file names
mingw: skip a test in t9130 that cannot pass on Windows
mingw: handle the missing POSIXPERM prereq in t9124
mingw: avoid illegal filename in t9118
mingw: mark t9100's test cases with appropriate prereqs
t0008: avoid absolute path
mingw: work around pwd issues in the tests
mingw: fix t9700's assumption about directory separators
mingw: skip test in t1508 that fails due to path conversion
tests: turn off git-daemon tests if FIFOs are not available
mingw: disable mkfifo-based tests
mingw: accomodate t0060-path-utils for MSYS2
mingw: fix t5601-clone.sh
mingw: let lstat() fail with errno == ENOTDIR when appropriate
mingw: try to delete target directory before renaming
mingw: prepare the TMPDIR environment variable for shell scripts
mingw: factor out Windows specific environment setup
Git.pm: stop assuming that absolute paths start with a slash
mingw: do not trust MSYS2's MinGW gettext.sh
...
|
|
It turns out "git clone" over rsync transport has been broken when
the source repository has packed references for a long time, and
nobody noticed nor complained about it.
* jk/drop-rsync-transport:
transport: drop support for git-over-rsync
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The emulated "yes" command used in our test scripts has been
tweaked not to spend too much time generating unnecessary output
that is not used, to help those who test on Windows where it would
not stop until it fills the pipe buffer due to lack of SIGPIPE.
* js/test-lib-windows-emulated-yes:
test-lib: limit the output of the yes utility
|
|
"git push --force-with-lease" has been taught to report if the push
needed to force (or fast-forwarded).
* aw/push-force-with-lease-reporting:
push: fix ref status reporting for --force-with-lease
|
|
"git worktree" had a broken code that attempted to auto-fix
possible inconsistency that results from end-users moving a
worktree to different places without telling Git (the original
repository needs to maintain backpointers to its worktrees, but
"mv" run by end-users who are not familiar with that fact will
obviously not adjust them), which actually made things worse
when triggered.
* nd/do-not-move-worktree-manually:
worktree: stop supporting moving worktrees manually
worktree.c: fix indentation
|
|
The low-level merge machinery has been taught to use CRLF line
termination when inserting conflict markers to merged contents that
are themselves CRLF line-terminated.
* js/xmerge-marker-eol:
merge-file: ensure that conflict sections match eol style
merge-file: let conflict markers match end-of-line style of the context
|
|
Signed-off-by: GyuYong Jung <obliviscence@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the test missing from fb86e32 (git remote: allow adding
remotes agreeing with url.<...>.insteadOf, 2014-12-23): we should
allow adding a remote with the URL when it agrees with the
url.<...>.insteadOf setting.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that git_connect is more information about connectivity
progress after: ("pass transport verbosity down to git_connect")
we should ensure it remains so for future users who need to
to diagnose networking problems.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As described in the commit message of 9b25a0b (config: add
include directive, 2012-02-06), the `--include` option is
only on by default in some cases. But our documentation
described it as just "defaults to on", which doesn't tell
the whole story.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When invoking default (g)vimdiff three-way merge, the merged file is
loaded as the first buffer but moved to the bottom as the fourth window.
This causes a disconnect between vim commands that operate on window
positions (e.g. CTRL-W_w) and those that operate on buffer index (e.g.
do/dp).
This change reorders the buffers to have the same index as windows while
keeping the cursor default to the merged result as the bottom window.
Signed-off-by: Dickson Wong <dicksonwong@gmail.com>
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The emulated "yes" command used in our test scripts has been
tweaked not to spend too much time generating unnecessary output
that is not used, to help those who test on Windows where it would
not stop until it fills the pipe buffer due to lack of SIGPIPE.
* js/test-lib-windows-emulated-yes:
test-lib: limit the output of the yes utility
|
|
A new "<branch>^{/!-<pattern>}" notation can be used to name a
commit that is reachable from <branch> that does not match the
given <pattern>.
* wp/sha1-name-negative-match:
object name: introduce '^{/!-<negative pattern>}' notation
test for '!' handling in rev-parse's named commits
|
|
Various clean-ups to the command line option parsing.
* jk/options-cleanup:
apply, ls-files: simplify "-z" parsing
checkout-index: disallow "--no-stage" option
checkout-index: handle "--no-index" option
checkout-index: handle "--no-prefix" option
checkout-index: simplify "-z" option parsing
give "nbuf" strbuf a more meaningful name
|
|
"git push --force-with-lease" has been taught to report if the push
needed to force (or fast-forwarded).
* aw/push-force-with-lease-reporting:
push: fix ref status reporting for --force-with-lease
|
|
Clean/smudge filters defined in a configuration file of lower
precedence can now be overridden to be a pass-through no-op by
setting the variable to an empty string.
* ls/clean-smudge-override-in-config:
convert: treat an empty string for clean/smudge filters as "cat"
|
|
There were a few "now I am doing this thing" progress messages in
the TCP connection code that can be triggered by setting a verbose
option internally in the code, but "git fetch -v" and friends never
passed the verbose option down to that codepath.
There was a brief discussion about the impact on the end-user
experience by not limiting this to "fetch -v -v", but I think the
conclusion is that this is OK to enable with a single "-v" as it is
not too noisy.
* ew/connect-verbose:
pass transport verbosity down to git_connect
|
Matthieu Moy
Eric Wong
Junio C Hamano
SZEDER Gábor
Kazutoshi Satoda
GyuYong Jung
Johannes Schindelin
Jeff King
Dickson Wong