| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently filter-branch exports GIT_DIR only if it is an
relative path but git-sh-setup might also set GIT_DIR to an
absolute path that is not exported yet. Additionally export
GIT_WORK_TREE with GIT_DIR to ensure that cwd is used as
working tree even for bare repositories.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/filter:
filter-branch: also don't fail in map() if a commit cannot be mapped
filter-branch: Use rev-list arguments to specify revision ranges.
filter-branch: fix behaviour of '-k'
filter-branch: use $(($i+1)) instead of $((i+1))
chmod +x git-filter-branch.sh
filter-branch: prevent filters from reading from stdin
t7003: make test repeatable
Add git-filter-branch
|
|
Additionally there was a similar part calling setenv and getenv
in the same way which missed a check if getenv succeeded.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Up to now to check for a working tree this was used:
!is_bare && !inside_git_dir
(the check for bare is redundant because is_inside_git_dir
returned already 1 for bare repositories).
Now the check is:
inside_work_tree && !inside_git_dir
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sv/objfixes:
Don't assume tree entries that are not dirs are blobs
git-cvsimport: Make sure to use $git_dir always instead of .git sometimes
fix documentation of unpack-objects -n
Accept dates before 2000/01/01 when specified as seconds since the epoch
|
|
When scanning the trees in track_tree_refs() there is a "lazy" test
that assumes that entries are either directories or files. Don't do
that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CVS import was failing on a couple repos I was trying to import.
I was setting GIT_DIR=newproj.git and using the -i flag, but this bug
was thwarting the effort... evil CVS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
unpack-objects -n didn't print the object list as promised on the
manual page, so alter the documentation to reflect the behaviour
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tests with git-filter-branch on a repository that was converted from
CVS and that has commits reaching back to 1999 revealed that it is
necessary to parse dates before 2000/01/01 when they are specified
as seconds since 1970/01/01. There is now still a limit, 100000000,
which is 1973/03/03 09:46:40 UTC, in order to allow that dates are
represented as 8 digits.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-merge-base is a builtin.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The map() function can be used by filters to map a commit id to its
rewritten id. Such a mapping may not exist, in which case the identity
mapping is used (the commit is returned unchanged).
In the rewrite loop, this mapping is also needed, but was done
explicitly in the same way. Use the map() function instead.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A subset of commits in a branch used to be specified by options (-k, -r)
as well as the branch tip itself (-s). It is more natural (for git users)
to specify revision ranges like 'master..next' instead. This makes it so.
If no range is specified it defaults to 'HEAD'.
As a consequence, the new name of the filtered branch must be the first
non-option argument. All remaining arguments are passed to 'git rev-list'
unmodified.
The tip of the branch that gets filtered is implied: It is the first
commit that git rev-list would print for the specified range.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option '-k' says that the given commit and _all_ of its ancestors
are kept as-is.
However, if a to-be-rewritten commit branched from an ancestor of an
ancestor of a commit given with '-k', filter-branch would fail.
Example:
A - B
\
C
If filter-branch was called with '-k B -s C', it would actually keep
B (and A as its parent), but would rewrite C, and its parent.
Noticed by Johannes Sixt.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The expression $((i+1)) is not portable at all: even some bash versions
do not grok it. So do not use it.
Noticed by Jonas Fonseca.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/tag:
Teach git-tag about showing tag annotations.
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original code did not take hierarchical branch names into account at all.
Tested-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this option, git-format-patch will generate simple
numbered files as output instead of the default using
with the first commit line appended.
This simplifies the ability to generate an MH-style
drafts folder with each message to be sent.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
$EMAIL is a system-wide setup that is used for many many many
applications. If the git user chose a specific user.email setup,
then _this_ should be honoured rather than $EMAIL.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
stdin is the list of commits when the env, tree and index
filter are executed. The filters are not supposed to read
anything from stdin so the best is to give them /dev/null
for reading.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* gb/idx:
Unify write_index_file functions
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already have two instances where we want to determine if a buffer
contains binary data as opposed to text.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With --verbose, it gets really chatty now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gitweb assumes that everything is in UTF-8. If a text contains invalid
UTF-8 character sequences, the text must be in a different encoding.
This commit introduces $fallback_encoding which would be used as input
encoding if gitweb encounters text with is not valid UTF-8.
Add basic test for this in t/t9500-gitweb-standalone-no-errors.sh
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Tested-by: Alexandre Julliard <julliard@winehq.org>
Tested-by: Ismail Dönmez <ismail@pardus.org.tr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The <pattern> for -l is now a shell pattern, not a list of grep parameters.
Option -l may be repeated with another <pattern>.
The new -n [<num>] option specifies how many lines from
the annotation are to be printed.
Not specifieing -n or -n 0 will just produce the tag names
Just -n or -n 1 will show the first line of the annotation on
the tag line.
Other valuse for -n will show that number of lines from the annotation.
The exit code used to indicate if any tag was found.
This is changed due to a different implementation.
A good way to test a tag for existence is to use:
git show-ref --quiet --verify refs/tags/$TAGNAME
Signed-off-by: Matthijs Melchior <mmelchior@xs4all.nl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This script is derived from Pasky's cg-admin-rewritehist.
In fact, it _is_ the same script, minimally adapted to work without cogito.
It _should_ be able to perform the same tasks, even if only relying on
core-git programs.
All the work is Pasky's, just the adaption is mine.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Hopefully-signed-off-by: Petr "cogito master" Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
But we kept saying "trailing whitespace" all the same. Reword the
error messages a bit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make people aware of our testsuite, and of non-ASCII encodings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* lh/submodules:
Add basic test-script for git-submodule
Add git-submodule command
* pb/am:
Remove git-applypatch
git-applymbox: Remove command
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch unifies the write_index_file functions in
builtin-pack-objects.c and index-pack.c. As the name
"index" is overloaded in git, move in the direction of
using "idx" and "pack idx" when refering to the pack index.
There should be no change in functionality.
Signed-off-by: Geert Bosch <bosch@gnat.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This test tries to verify basic sanity of git-submodule, i.e. that it is
able to clone and update a submodule repository, that its status output is
sane, and that it barfs when the submodule path is occupied during init.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* np/pack:
fix repack with --max-pack-size
builtin-pack-object: cache small deltas
git-pack-objects: cache small deltas between big objects
builtin-pack-objects: don't fail, if delta is not possible
|
|
* sp/pack:
Style nit - don't put space after function names
Ensure the pack index is opened before access
Simplify index access condition in count-objects, pack-redundant
Test for recent rev-parse $abbrev_sha1 regression
rev-parse: Identify short sha1 sums correctly.
Attempt to delay prepare_alt_odb during get_sha1
Micro-optimize prepare_alt_odb
Lazily open pack index files on demand
|
|
The command is part of the main porcelain making git-add more
appropriate.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Matthias Lederhofer
Junio C Hamano
Sam Vilain
Michael Milligan
Johannes Sixt
Johannes Schindelin
Josh Triplett
Jon Loeliger
Pierre Habouzit
Martin Koegler
Randal L. Schwartz
Matthijs Melchior
Junio C Hamano
Geert Bosch
Lars Hjemli
Jonas Fonseca