| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If we are trying to resolve deltas for a long delta chain composed
of multi-megabyte objects we can easily run into requiring 500M+
of memory to hold each object in the chain on the call stack while
we recurse into the dependent objects and resolve them.
We now use a simple delta cache that discards objects near the
bottom of the call stack first, as they are the most least recently
used objects in this current delta chain. If we recurse out of a
chain we may find the base object is no longer available, as it was
free'd to keep memory under the deltaBaseCacheLimit. In such cases
we must unpack the base object again, which will require recursing
back to the root of the top of the delta chain as we released that
root first.
The astute reader will probably realize that we can still exceed
the delta base cache limit, but this happens only if the most
recent base plus the delta plus the inflated dependent sum up to
more than the base cache limit. Due to the way patch_delta is
currently implemented we cannot operate in less memory anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we free the data stored within a base_data we need the struct
object_entry to get the data back again for use with another dependent
delta. Storing the object_entry* in base_data makes it simple to call
get_data_from_pack() to recover the compressed information.
This however means that we must add the missing base object to the end of
our packfile prior to calling resolve_delta() on each of the dependent
deltas. Adding the base first ensures we can read the base back from the
pack we are indexing, as if it had been included by the remote side.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We need to release earlier inflated base objects when memory gets
low, which means we need to be able to walk up or down the stack
to locate the objects we want to release, and free their data.
The new link/unlink routines allow inserting and removing the struct
base_data during recursion inside resolve_delta, and the global
base_cache gives us the head of the chain (bottom of the stack)
so we can traverse it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We need to discard base objects which are not recently used if our
memory gets low, such as when we are unpacking a long delta chain
of a very large object.
To support tracking the available base objects we combine the
pointer and size into a struct. Future changes would allow the
data pointer to be free'd and marked NULL if memory gets low.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test created an initial commit, made .git/objects unwritable and then
exercised various codepaths to create loose commit, tree and blob objects
to make sure the commands notice failures from these attempts.
However, the initial commit was not preceded with test_tick, which made
its object name depend on the timestamp. The names of all the later tree
and blob objects the test tried to create were static. If the initial
commit's object name happened to begin with the same two hexdigits as the
tree or blob objects the test later attempted to create, the fan-out
directory in which these tree or blob would be created is already created
when the initial commit was made, and the object creation succeeds, and
commands being tested should not notice any failure --- in short, the test
was bogus.
This makes the fan-out directories also unwritable, and adds test_tick
before the commit object creation to make the test repeatable.
The contents of the file to create a blob from "a" to "60" is to force the
name of the blob object to begin with "1b", which shares the fan-out
directory with the initial commit that is created with the test. This was
useful when diagnosing the breakage of this test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
06cbe85 (Make core.sharedRepository more generic, 2008-04-16) broke the
traditional setting of core.sharedRepository to true, which was to make
the repository group writable: with umask 022, it would clear the
permission bits for 'other'. (umask 002 did not exhibit this behaviour
since pre-chmod() check in adjust_shared_perm() fails in that case.)
The call to adjust_shared_perm() should only loosen the permission.
If the user has umask like 022 or 002 that allow others to read, the
resulting files should be made readable and writable by group, without
restricting the readability by others.
This patch fixes the adjust_shared_perm() mode tweak based on Junio's
suggestion and adds the appropriate tests to t/t1301-shared-repo.sh.
Cc: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-submodule add would trip if path to the submodule included a space,
or if its .git was a gitdir: link to a GIT_DIR kept elsewhere. Fix both.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many git commands use '--' to separate subcommands, options, and refs
from paths. However, the programmable completion for several of these
commands does not respect the '--', and offer subcommands, options, or
refs after a '--', although only paths are permitted. e.g. 'git bisect
-- <TAB>' offers subcommands, 'git log -- --<TAB>' offers options and
'git log -- git<TAB>' offers all gitgui tags.
The completion for the following commands share this wrong behaviour:
am add bisect commit diff log reset shortlog submodule gitk.
To avoid this, we check the presence of a '--' on the command line first
and let the shell do filename completion, if one is found.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once a clone is successful we no longer need to hold onto the
.keep file created by the transport. Delete the file so we
can later repack the complete repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If git attempts to delete a ref, but the unlink of the ref
file fails, we print a message to stderr. This is usually a
good thing, but if the error is ENOENT, then it indicates
that the ref has _already_ been deleted. And since that's
our goal, it doesn't make sense to complain to the user.
This harmonizes the error reporting behavior for the
unpacked and packed cases; the packed case already printed
nothing on ENOENT, but the unpacked printed unconditionally.
Additionally, send-pack would, when deleting the tracking
ref corresponding to a remote delete, print "Failed to
delete" on any failure. This can be a misleading
message, since we actually _did_ delete at the remote side,
but we failed to delete locally. Rather than make the
message more precise, let's just eliminate it entirely; the
delete_ref routine already takes care of printing out a much
more specific message about what went wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* qq/maint:
run_command(): respect GIT_TRACE
|
|
* lt/racy-empty:
racy-git: an empty blob has a fixed object name
|
|
* 'qq/maint' (early part):
git-svn.perl: workaround assertions in svn library 1.5.0
mailinfo: feed the correct line length to decode_transfer_encoding()
git-clone: remove leftover debugging fprintf().
Fix "config_error_nonbool" used with value instead of key
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
|
|
When GIT_TRACE is set, the user is most likely wanting to see an external
command that is about to be executed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With subversion 1.5.0 (C and perl libraries) the git-svn selftest
t9101-git-svn-props.sh fails at test 25 and 26. The following commands
cause assertions in the svn library
$ cd deeply
$ git-svn propget svn:ignore .
perl: /build/buildd/subversion-1.5.0dfsg1/subversion/libsvn_ra/ra_loader.c:674: svn_ra_get_dir: Assertion `*path != '/'' failed.
Aborted
$ git-svn propget svn:ignore ..
perl: /build/buildd/subversion-1.5.0dfsg1/subversion/libsvn_subr/path.c:120: svn_path_join: Assertion `is_canonical(component, clen)' failed.
With this commit, git-svn makes sure the path doesn't start with a
slash, and is not a dot, working around these assertions.
The breakage was reported by Lucas Nussbaum through
http://bugs.debian.org/489108
Signed-off-by: Gerrit Pape <pape@smarden.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When handling a MIME multipart message, multi-part boundary lines are eaten
by a call to handle_boundary() function from the main loop of handle_body(),
and after that happens, we should update the line length correctly, because
handle_boundary() udpates line[] with new data.
This was caused by a thinko in 9aa2309 (mailinfo: apply the same fix not
to lose NULs in BASE64 and QP codepaths, 2008-05-25).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function "config_error_nonbool", that is defined in "config.c",
is used to report an error when a config key in the config file
should have a corresponding value but it hasn't.
So the parameter to this function should be the key and not the
value, because the value is undefined. And it could crash if the
value is used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The earlier built-in conversion seems to have broken "git-clone"; this
teaches the command to honor the "-q" option again when talking to the
remote end over native transports (file://, git:// and ssh://).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The document gives overall definition of states in DESCRIPTION, describes
various aspects of git operations that can be influenced in EFFECTS, and
finally gives examples in the EXAMPLE section. Archive creation however
was somehow documented after the EXAMPLE section, not insode EFFECTS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'format.suffix'
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
New users sometimes import a project and then immediately
try to use the imported repository as a central shared repository.
This provides pointers about setting up a bare repository for that
in the parts of the documentation dealing with CVS migration.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it explicit that the --pretty formats 'medium' and 'email' use the
author date (and ignore the committer date).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pointed out by Ramsay Jones.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After master.k.org upgrade, I started seeing these warning messages:
transport.c: In function 'get_refs_via_curl':
transport.c:458: error: call to '_curl_easy_setopt_err_write_callback' declared with attribute warning: curl_easy_setopt expects a curl_write_callback argument for this option
It appears that the curl header wants to enforce the function signature
for callback function given to curl_easy_setopt() to be compatible with
that of (*curl_write_callback) or fwrite. This patch seems to work the
issue around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-clone-insteadof:
clone: respect the settings in $HOME/.gitconfig and /etc/gitconfig
clone: respect url.insteadOf setting in global configs
|
|
* jk/maint-fetch-ref-hier:
fetch: give a hint to the user when local refs fail to update
fetch: report local storage errors in status table
|
|
* jc/maint-reset:
Allow "git-reset path" when unambiguous
|
|
If we match a lightweight (non-annotated tag) as the name to
output and --long was requested we do not have a tag, nor do
we have a tagged object to display. Instead we must use the
object we were passed as input for the long format display.
Reported-by: Mark Burton <markb@ordern.com>
Backtraced-by: Mikael Magnusson <mikachu@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cmd_show loop resolves tags by showing them, then pointing the
object to the 'tagged' member. However, this object is not fully
initialized; it only contains the SHA1. (This resulted in a segfault
if there were two levels of tags.) We apply parse_object to get a
full object.
Noticed by Kalle Olavi Niemitalo on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are basically two categories of update failures for
local refs:
1. problems outside of git, like disk full, bad
permissions, etc.
2. D/F conflicts on tracking branch ref names
In either case, there should already have been an error
message. In case '1', hopefully enough information has
already been given that the user can fix it. In the case of
'2', we can hint that the user can clean up their tracking
branch area by using 'git remote prune'.
Note that we don't actually know _which_ case we have, so
the user will receive the hint in case 1, as well. In this
case the suggestion won't do any good, but hopefully the
user is smart enough to figure out that it's just a hint.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rev-parse manpage introduces the branch@{date} syntax,
and mentions the reflog specifically. However, new users may
not be familiar with the distinction between the reflog and
the commit date, so let's help them out with a "you may be
interested in --until" pointer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After initializing the config in the newly-created repository, we
need to unset GIT_CONFIG so that the global configs are read again.
Noticed by Pieter de Bie.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original sanitization code was just taken from the
remotes2config.sh shell script in contrib.
Credit to Avery Pennarun for noticing this mistake, and Junio
for clarifying the rules for config section names:
Junio C Hamano wrote in <7vfxr23s6m.fsf@gitster.siamese.dyndns.org>:
> In
>
> [foo "bar"] baz = value
>
> foo and baz must be config.c::iskeychar() (and baz must be isalpha()), but
> "bar" can be almost anything.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit ffe256f9bac8a40ff751a9341a5869d98f72c285 ("git-svn: Speed up fetch")
introduced changes that create a temporary file for each object fetched by
svn. These files should be deleted automatically, but perl apparently
doesn't do this until the process exits (or perhaps when its garbage
collector runs).
This means that on a large fetch, especially with lots of branches, we
sometimes fill up /tmp completely, which prevents the next temp file from
being written completely. This is aggravated by the fact that a new temp
file is created for each updated file, even if that update produces a file
identical to one already in git. Thus, it can happen even if there's lots
of disk space to store the finished repository.
We weren't adequately checking for write errors, so this would result in an
invalid file getting committed, which caused git-svn to fail later with an
invalid checksum.
This patch adds a check to syswrite() so similar problems don't lead to
corruption in the future. It also unlink()'s each temp file explicitly
when we're done with it, so the disk doesn't need to fill up.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Tested-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When run in batch mode, git cat-file never frees the memory for the blob
contents it is printing. This quickly adds up and causes git-svn to be
hardly usable for imports of large svn repos, because it uses cat-file in
batch mode and cat-file's memory usage easily reaches several hundred MB
without any good reason.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-config expects a space, not '=' between option and value.
Also, quote the value since it contains globs, which some shells will not
pass through unchanged, or will abort if the glob doesn't expand.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure that buf has enough space to store the trailing \0 of
the command line argument, too.
Signed-off-by: Jochen Voss <voss@seehuhn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, if there was an error while storing a local
tracking ref, the low-level functions would report an error,
but fetch's status output wouldn't indicate any problem.
E.g., imagine you have an old "refs/remotes/origin/foo/bar" but
upstream has deleted "foo/bar" in favor of a new branch
"foo". You would get output like this:
error: there are still refs under 'refs/remotes/origin/foo'
From $url_of_repo
* [new branch] foo -> origin/foo
With this patch, the output takes into account the status of
updating the local ref:
error: there are still refs under 'refs/remotes/origin/foo'
From $url_of_repo
! [new branch] foo -> origin/foo (unable to update local ref)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Shawn O. Pearce
Junio C Hamano
Stephan Beyer
Lukas Sandström
Petr Baudis
Mark Levedahl
SZEDER Gábor
Jeff King
Johannes Schindelin
Gerrit Pape
Alex Riesen
Mikael Magnusson
Christian Couder
Brian Hetro
Matthew Ogilvie
Nikolaus Schulz
Thomas Rast
Eric Wong
Avery Pennarun
Björn Steinbrink
Joey Hess
Jochen Voss