| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 4e689d81718eb6e939cace317ea3e33cb994dcbb,
to be replaced with a reworked version.
|
|
This reverts commit b548f0f1568f6b01e55ca69c24d3cb19489f92aa,
to be replaced with a reworked version.
|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A directory that is untracked does not imply that all files under it
should be categorized as untracked; in particular, if the caller is
interested in ignored files, many files or directories underneath the
untracked directory may be ignored. We previously partially handled
this right with DIR_SHOW_IGNORED_TOO, but missed DIR_SHOW_IGNORED. It
was not obvious, though, because the logic for untracked and excluded
files had been fused together making it harder to reason about. The
previous commit split that logic out, making it easier to notice that
DIR_SHOW_IGNORED was missing. Add it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The show_other_directories case in treat_directory() tried to handle
both excludes and untracked files with the same logic, and mishandled
both the excludes and the untracked files in the process, in different
ways. Split that logic apart, and then focus on the logic for the
excludes; a subsequent commit will address the logic for untracked
files.
For show_other_directories, an excluded directory means that
every path underneath that directory will also be excluded. Given that
the calling code requested to just show directories when everything
under a directory had the same state (that's what the
"DIR_SHOW_OTHER_DIRECTORIES" flag means), we generally do not need to
traverse into such directories and can just immediately mark them as
ignored (i.e. as path_excluded). The only reason we cannot just
immediately return path_excluded is the DIR_HIDE_EMPTY_DIRECTORIES flag
and the possibility that the ignored directory is an empty directory.
The code previously treated DIR_SHOW_IGNORED_TOO in most cases as an
exception as well, which was wrong. It can sometimes reduce the number
of cases where we need to recurse (namely if
DIR_SHOW_IGNORED_TOO_MODE_MATCHING is also set), but should not be able
to increase the number of cases where we need to recurse. Fix the logic
accordingly.
Some sidenotes about possible confusion with dir.c:
* "ignored" often refers to an untracked ignore", i.e. a file which is
not tracked which matches one of the ignore/exclusion rules. But you
can also have a "tracked ignore", a tracked file that happens to match
one of the ignore/exclusion rules and which dir.c has to worry about
since "git ls-files -c -i" is supposed to list them.
* The dir code often uses "ignored" and "excluded" interchangeably,
which you need to keep in mind while reading the code.
* "exclude" is used multiple ways in the code:
* As noted above, "exclude" is often a synonym for "ignored".
* The logic for parsing .gitignore files was re-used in
.git/info/sparse-checkout, except there it is used to mark paths that
the user wants to *keep*. This was mostly addressed by commit
65edd96aec ("treewide: rename 'exclude' methods to 'pattern'",
2019-09-03), but every once in a while you'll find a comment about
"exclude" referring to these patterns that might in fact be in use
by the sparse-checkout machinery for inclusion rules.
* The word "EXCLUDE" is also used for pathspec negation, as in
(pathspec->items[3].magic & PATHSPEC_EXCLUDE)
Thus if a user had a .gitignore file containing
*~
*.log
!settings.log
And then ran
git add -- 'settings.*' ':^settings.log'
Then :^settings.log is a pathspec negation making settings.log not
be requested to be added even though all other settings.* files are
being added. Also, !settings.log in the gitignore file is a negative
exclude pattern meaning that settings.log is normally a file we
want to track even though all other *.log files are ignored.
Sometimes it feels like dir.c needs its own glossary with its many
definitions, including the multiply-defined terms.
Reported-by: Jason Gore <Jason.Gore@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the last commit, we added a testcase showing that the directory
traversal machinery sometimes traverses into directories unnecessarily.
Here we show that there are cases where it does the opposite: it does
not traverse into directories, despite those directories having
important files that need to be flagged.
Add a testcase showing that `git ls-files -o -i --directory` can omit
some of the files it should be listing, and another showing that `git
clean -fX` can fail to clean out some of the expected files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The PNPM package manager is apparently creating deeply nested (but
ignored) directory structures; traversing them is costly
performance-wise, unnecessary, and in some cases is even throwing
warnings/errors because the paths are too long to handle on various
platforms. Add a testcase that checks for such unnecessary directory
traversal.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ls-files --ignored can be used together with either --others or
--cached. After being perplexed for a bit and digging in to the code, I
assumed that ls-files -i was just broken and not printing anything and
I had a nice patch ready to submit when I finally realized that -i can be
used with --cached to find tracked ignores.
While that was a mistake on my part, and a careful reading of the
documentation could have made this more clear, I suspect this is an
error others are likely to make as well. In fact, of two uses in our
testsuite, I believe one of the two did make this error. In t1306.13,
there are NO tracked files, and all the excludes built up and used in
that test and in previous tests thus have to be about untracked files.
However, since they were looking for an empty result, the mistake went
unnoticed as their erroneous command also just happened to give an empty
answer.
-i will most the time be used with -o, which would suggest we could just
make -i imply -o in the absence of either a -o or -c, but that would be
a backward incompatible break. Instead, let's just flag -i without
either a -o or -c as an error, and update the two relevant testcases to
specify their intent.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Provide more statistics in trace2 output that include the number of
directories and total paths visited by the directory traversal logic.
Subsequent patches will take advantage of this to ensure we do not
unnecessarily traverse into ignored directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a corner case bug in "git mv" on case insensitive systems,
which was introduced in 2.29 timeframe.
* tb/git-mv-icase-fix:
git mv foo FOO ; git mv foo bar gave an assert
|
|
Code cleanup.
* rs/xcalloc-takes-nelem-first:
fix xcalloc() argument order
|
|
Update insn in Makefile comments to run fuzz-all target.
* ah/make-fuzz-all-doc-update:
Makefile: update 'make fuzz-all' docs to reflect modern clang
|
|
Unused code removal.
* jk/slimmed-down:
vcs-svn: remove header files as well
|
|
CALLOC_ARRAY() macro replaces many uses of xcalloc().
* rs/calloc-array:
cocci: allow xcalloc(1, size)
use CALLOC_ARRAY
git-compat-util.h: drop trailing semicolon from macro definition
|
|
Fix macros that can silently inject unintended null-statements.
* rs/avoid-null-statement-after-macro-call:
mem-pool: drop trailing semicolon from macro definition
block-sha1: drop trailing semicolon from macro definition
|
|
Docfix.
* km/config-doc-typofix:
config.txt: add missing period
|
|
Test fix.
* jt/clone-unborn-head:
t5606: run clone branch name test with protocol v2
|
|
The data structure used by fsmonitor interface was not properly
duplicated during an in-core merge, leading to use-after-free etc.
* js/fsmonitor-unpack-fix:
fsmonitor: do not forget to release the token in `discard_index()`
fsmonitor: fix memory corruption in some corner cases
|
|
"git bisect" reimplemented more in C during 2.30 timeframe did not
take an annotated tag as a good/bad endpoint well. This regression
has been corrected.
* jk/bisect-peel-tag-fix:
bisect: peel annotated tags to commits
|
|
The fsmonitor interface read from its input without making sure
there is something to read from. This bug is new in 2.31
timeframe.
* jh/fsmonitor-prework:
fsmonitor: avoid global-buffer-overflow READ when checking trivial response
|
|
Code clean-up.
* jc/calloc-fix:
xcalloc: use CALLOC_ARRAY() when applicable
|
|
In 56c6910028a (fsmonitor: change last update timestamp on the
index_state to opaque token, 2020-01-07), we forgot to adjust
`discard_index()` to release the "last-update" token: it is no longer a
64-bit number, but a free-form string that has been allocated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 56c6910028a (fsmonitor: change last update timestamp on the
index_state to opaque token, 2020-01-07), we forgot to adjust the part
of `unpack_trees()` that copies the FSMonitor "last-update" information
that we copy from the source index to the result index since 679f2f9fdd2
(unpack-trees: skip stat on fsmonitor-valid files, 2019-11-20).
Since the "last-update" information is no longer a 64-bit number, but a
free-form string that has been allocated, we need to duplicate it rather
than just copying it.
This is important because there _are_ cases when `unpack_trees()` will
perform a oneway merge that implicitly calls `refresh_fsmonitor()`
(which will allocate that "last-update" token). This happens _after_
that token was copied into the result index. However, we _then_ call
`check_updates()` on that index, which will _also_ call
`refresh_fsmonitor()`, accessing the "last-update" string, which by now
would be released already.
In the instance that lead to this patch, this caused a segmentation
fault during a lengthy, complicated rebase involving the todo command
`reset` that (crucially) had to updated many files. Unfortunately, it
seems very hard to trigger that crash, therefore this patch is not
accompanied by a regression test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch fixes a bug where git-bisect doesn't handle receiving
annotated tags as "git bisect good <tag>", etc. It's a regression in
27257bc466 (bisect--helper: reimplement `bisect_state` & `bisect_head`
shell functions in C, 2020-10-15).
The original shell code called:
sha=$(git rev-parse --verify "$rev^{commit}") ||
die "$(eval_gettext "Bad rev input: \$rev")"
which will peel the input to a commit (or complain if that's not
possible). But the C code just calls get_oid(), which will yield the oid
of the tag.
The fix is to peel to a commit. The error message here is a little
non-idiomatic for Git (since it starts with a capital). I've mostly left
it, as it matches the other converted messages (like the "Bad rev input"
we print when get_oid() fails), though I did add an indication that it
was the peeling that was the problem. It might be worth taking a pass
through this converted code to modernize some of the error messages.
Note also that the test does a bare "grep" (not i18ngrep) on the
expected "X is the first bad commit" output message. This matches the
rest of the test script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
4f37d45706 ("clone: respect remote unborn HEAD", 2021-02-05) introduces
a new feature (if the remote has an unborn HEAD, e.g. when the remote
repository is empty, use it as the name of the branch) that only works
in protocol v2, but did not ensure that one of its tests always uses
protocol v2, and thus that test would fail if
GIT_TEST_PROTOCOL_VERSION=0 (or 1) is used. Therefore, add "-c
protocol.version=2" to the appropriate test.
(The rest of the tests from that commit have "-c protocol.version=2"
already added.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow BLOCK_GROWTH_SIZE to be used like an integer literal by removing
the trailing semicolon from its definition. Also wrap the expression in
parentheses, to allow it to be used with operators without leading to
unexpected results. It doesn't matter for the current use site, but
make it follow standard macro rules anyway to avoid future surprises.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
23119ffb4e (block-sha1: put expanded macro parameters in parentheses,
2012-07-22) added a trailing semicolon to the definition of SHA_MIX
without explanation. It doesn't matter with the current code, but make
sure to avoid potential surprises by removing it again.
This allows the macro to be used almost like a function: Users can
combine it with operators of their choice, but still must not pass an
expression with side-effects as a parameter, as it would be evaluated
multiple times.
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
query_result can be be an empty strbuf (STRBUF_INIT) - in that case
trying to read 3 bytes triggers a buffer overflow read (as
query_result.buf = '\0').
Therefore we need to check query_result's length before trying to read 3
bytes.
This overflow was introduced in:
940b94f35c (fsmonitor: log invocation of FSMonitor hook to trace2, 2021-02-03)
It was found when running the test-suite against ASAN, and can be most
easily reproduced with the following command:
make GIT_TEST_OPTS="-v" DEFAULT_TEST_TARGET="t7519-status-fsmonitor.sh" \
SANITIZE=address DEVELOPER=1 test
==2235==ERROR: AddressSanitizer: global-buffer-overflow on address 0x0000019e6e5e at pc 0x00000043745c bp 0x7fffd382c520 sp 0x7fffd382bcc8
READ of size 3 at 0x0000019e6e5e thread T0
#0 0x43745b in MemcmpInterceptorCommon(void*, int (*)(void const*, void const*, unsigned long), void const*, void const*, unsigned long) /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/../sanitizer_common/sanitizer_common_interceptors.inc:842:7
#1 0x43786d in bcmp /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/../sanitizer_common/sanitizer_common_interceptors.inc:887:10
#2 0x80b146 in fsmonitor_is_trivial_response /home/ahunt/oss-fuzz/git/fsmonitor.c:192:10
#3 0x80b146 in query_fsmonitor /home/ahunt/oss-fuzz/git/fsmonitor.c:175:7
#4 0x80a749 in refresh_fsmonitor /home/ahunt/oss-fuzz/git/fsmonitor.c:267:21
#5 0x80bad1 in tweak_fsmonitor /home/ahunt/oss-fuzz/git/fsmonitor.c:429:4
#6 0x90f040 in read_index_from /home/ahunt/oss-fuzz/git/read-cache.c:2321:3
#7 0x8e5d08 in repo_read_index_preload /home/ahunt/oss-fuzz/git/preload-index.c:164:15
#8 0x52dd45 in prepare_index /home/ahunt/oss-fuzz/git/builtin/commit.c:363:6
#9 0x52a188 in cmd_commit /home/ahunt/oss-fuzz/git/builtin/commit.c:1588:15
#10 0x4ce77e in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#11 0x4ccb18 in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#12 0x4cb01c in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#13 0x4cb01c in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#14 0x6aca8d in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#15 0x7fb027bf5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#16 0x4206b9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
0x0000019e6e5e is located 2 bytes to the left of global variable 'strbuf_slopbuf' defined in 'strbuf.c:51:6' (0x19e6e60) of size 1
'strbuf_slopbuf' is ascii string ''
0x0000019e6e5e is located 126 bytes to the right of global variable 'signals' defined in 'sigchain.c:11:31' (0x19e6be0) of size 512
SUMMARY: AddressSanitizer: global-buffer-overflow /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/../sanitizer_common/sanitizer_common_interceptors.inc:842:7 in MemcmpInterceptorCommon(void*, int (*)(void const*, void const*, unsigned long), void const*, void const*, unsigned long)
Shadow bytes around the buggy address:
0x000080334d70: f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9 00 00 00 00
0x000080334d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x000080334d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x000080334da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x000080334db0: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9
=>0x000080334dc0: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9[f9]01 f9 f9 f9
0x000080334dd0: f9 f9 f9 f9 03 f9 f9 f9 f9 f9 f9 f9 02 f9 f9 f9
0x000080334de0: f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9 04 f9 f9 f9
0x000080334df0: f9 f9 f9 f9 01 f9 f9 f9 f9 f9 f9 f9 00 00 00 00
0x000080334e00: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 01 f9 f9 f9
0x000080334e10: f9 f9 f9 f9 04 f9 f9 f9 f9 f9 f9 f9 00 f9 f9 f9
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allocating a pre-cleared single element is quite common and it is
misleading to use CALLOC_ARRAY(); these allocations that would be
affected without this change are not allocating an array.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are for codebase before Git 2.31
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Disable the recent mergetool's hideresolved feature by default for
backward compatibility and safety.
* jn/mergetool-hideresolved-is-optional:
doc: describe mergetool configuration in git-mergetool(1)
mergetool: do not enable hideResolved by default
|
|
Fix for a topic in 'master'.
* tb/pack-revindex-on-disk:
pack-revindex.c: don't close unopened file descriptors
|
|
l10n for Git 2.31.0 round 2
* tag 'l10n-2.31.0-rnd2' of git://github.com/git-l10n/git-po:
l10n: zh_CN: for git v2.31.0 l10n round 1 and 2
l10n: de.po: Update German translation for Git v2.31.0
l10n: pt_PT: add Portuguese translations part 1
l10n: vi.po(5104t): for git v2.31.0 l10n round 2
l10n: es: 2.31.0 round 2
l10n: Add translation team info
l10n: start Indonesian translation
l10n: zh_TW.po: v2.31.0 round 2 (15 untranslated)
l10n: bg.po: Updated Bulgarian translation (5104t)
l10n: fr: v2.31 rnd 2
l10n: tr: v2.31.0-rc1
l10n: sv.po: Update Swedish translation (5104t0f0u)
l10n: git.pot: v2.31.0 round 2 (9 new, 8 removed)
l10n: tr: v2.31.0-rc0
l10n: sv.po: Update Swedish translation (5103t0f0u)
l10n: pl.po: Update translation
l10n: fr: v2.31.0 rnd 1
l10n: git.pot: v2.31.0 round 1 (155 new, 89 removed)
l10n: Update Catalan translation
l10n: ru.po: update Russian translation
|
|
fc47391e24 (drop vcs-svn experiment, 2020-08-13) removed most vcs-svn
files. Drop the remaining header files as well, as they are no longer
used.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Translate 161 new messages (5104t0f0u) for git 2.31.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of github.com:vnwildman/git:
l10n: vi.po(5104t): for git v2.31.0 l10n round 2
|
|
* 'l10n/zh_TW/210301' of github.com:l10n-tw/git-po:
l10n: zh_TW.po: v2.31.0 round 2 (15 untranslated)
|
|
* 'po-id' of github.com:bagasme/git-po:
l10n: Add translation team info
l10n: start Indonesian translation
|
|
* 'master' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
* 'russian-l10n' of github.com:DJm00n/git-po-ru:
l10n: ru.po: update Russian translation
|
|
* 'pt-PT' of github.com:git-l10n-pt-PT/git-po:
l10n: pt_PT: add Portuguese translations part 1
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make CALLOC_ARRAY usable like a function by requiring callers to supply
the trailing semicolon, which all of the current ones already do. With
the extra semicolon e.g. the following code wouldn't compile because it
disconnects the "else" from the "if":
if (condition)
CALLOC_ARRAY(ptr, n);
else
whatever();
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
Derrick Stolee
Junio C Hamano
Johannes Schindelin
Kyle Meyer
Jeff King
Jonathan Tan
René Scharfe
Andrzej Hunt
Jiang Xin