Age | Commit message (Collapse) | Author | Files | Lines |
|
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Often we read "text" files that are supplied by the end user
(e.g. commit log message that was edited with $GIT_EDITOR upon 'git
commit -e'), and in some environments lines in a text file are
terminated with CRLF. Existing strbuf_getline() knows to read a
single line and then strip the terminating byte from the result, but
it is handy to have a version that is more tailored for a "text"
input that takes both '\n' and '\r\n' as line terminator (aka
<newline> in POSIX lingo) and returns the body of the line after
stripping <newline>.
Recently reimplemented "git am" uses such a function implemented
privately; move it to strbuf.[ch] and make it available for others.
Note that we do not blindly replace calls to strbuf_getline() that
uses LF as the line terminator with calls to strbuf_getline_crlf()
and this is very much deliberate. Some callers may want to treat an
incoming line that ends with CR (and terminated with LF) to have a
payload that includes the final CR, and such a blind replacement
will result in misconversion when done without code audit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We write one SP on each side of an operator, even inside an [] pair
that computes the array index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
|
|
"git symbolic-ref" forgot to report a failure with its exit status.
* jk/symbolic-ref-maint:
t1401: test reflog creation for git-symbolic-ref
symbolic-ref: propagate error code from create_symref()
|
|
When getpwuid() on the system returned NULL (e.g. the user is not
in the /etc/passwd file or other uid-to-name mappings), the
codepath to find who the user is to record it in the reflog barfed
and died. Loosen the check in this codepath, which already accepts
questionable ident string (e.g. host part of the e-mail address is
obviously bogus), and in general when we operate fmt_ident() function
in non-strict mode.
* jk/ident-loosen-getpwuid:
ident: loosen getpwuid error in non-strict mode
ident: keep a flag for bogus default_email
ident: make xgetpwuid_self() a static local helper
|
|
Improve error reporting when SMTP TLS fails.
* jk/send-email-ssl-errors:
send-email: enable SSL level 1 debug output
|
|
The completion script (in contrib/) used to list "git column"
(which is not an end-user facing command) as one of the choices
* sg/completion-no-column:
completion: remove 'git column' from porcelain commands
|
|
l10n-2.7.0-rnd2+de
* tag 'l10n-2.7.0-rnd2+de' of git://github.com/git-l10n/git-po:
l10n: de.po: translate 68 new messages
l10n: de.po: improve some translations
|
|
Translate 68 new messages came from git.pot update in
f4f2c8f (l10n: git.pot: v2.7.0 round 1 (66 new, 29 removed)) and
2c0ca05 (l10n: git.pot: v2.7.0 round 2 (2 new, 2 removed)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthias RĂ¼ster <matthias.ruester@gmail.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Phillip Sz <phillip.szelat@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" when interacting with multiple depots at the same time
used to incorrectly drop changes.
* sh/p4-multi-depot:
git-p4: reduce number of server queries for fetches
git-p4: support multiple depot paths in p4 submit
git-p4: failing test case for skipping changes with multiple depots
|
|
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
|
|
"git symbolic-ref" forgot to report a failure with its exit status.
* jk/symbolic-ref-maint:
t1401: test reflog creation for git-symbolic-ref
symbolic-ref: propagate error code from create_symref()
|
|
l10n-2.7.0-rnd2
* tag 'l10n-2.7.0-rnd2' of git://github.com/git-l10n/git-po:
l10n: ru.po: update Russian translation
l10n: Updated Bulgarian translation of git (2477t,0f,0u)
l10n: ca.po: update translation
l10n: zh_CN: for git v2.7.0 l10n round 2
l10n: sv.po: Update Swedish translation (2477t0f0u)
l10n: sv: Fix bad translation
l10n: fr.po v2.7.0 round 2 (2477t)
l10n: git.pot: v2.7.0 round 2 (2 new, 2 removed)
l10n: zh_CN: for git v2.7.0 l10n round 1
l10n: ca.po: update translation
l10n: fr v2.7.0 round 1 (2477t)
l10n: Updated Bulgarian translation of git (2477t,0f,0u)
l10n: sv.po: Update Swedish translation (2477t0f0u)
l10n: vi.po: Updated translation (2477t)
l10n: git.pot: v2.7.0 round 1 (66 new, 29 removed)
l10n: fr.po: Fix typo
l10n: fr.po: Fix typo
|
|
Signed-off-by: Dimitriy Ryazantcev <dimitriy.ryazantcev@gmail.com>
|
|
* 'master' of git://github.com/alshopov/git-po:
l10n: Updated Bulgarian translation of git (2477t,0f,0u)
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
|
|
Update 2 translations (2477t0f0u) for git v2.7.0-rc1.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of git://github.com/nafmo/git-l10n-sv:
l10n: sv.po: Update Swedish translation (2477t0f0u)
l10n: sv: Fix bad translation
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Found-by: Sebastian Rasmussen <sebras@gmail.com>
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The write(2) emulation for Windows learned to set errno to EPIPE
when necessary.
* js/emu-write-epipe-on-windows:
mingw: emulate write(2) that fails with a EPIPE
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Generate po/git.pot from v2.7.0-rc1-44-g1d88dab for git v2.7.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of git://github.com/git-l10n/git-po:
l10n: zh_CN: for git v2.7.0 l10n round 1
l10n: ca.po: update translation
l10n: fr v2.7.0 round 1 (2477t)
l10n: Updated Bulgarian translation of git (2477t,0f,0u)
l10n: sv.po: Update Swedish translation (2477t0f0u)
l10n: vi.po: Updated translation (2477t)
l10n: git.pot: v2.7.0 round 1 (66 new, 29 removed)
l10n: fr.po: Fix typo
l10n: fr.po: Fix typo
|
|
The current code writes a reflog entry whenever we update a
symbolic ref, but we never test that this is so. Let's add a
test to make sure upcoming refactoring doesn't cause a
regression.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If create_symref() fails, git-symbolic-ref will still exit
with code 0, and our caller has no idea that the command did
nothing.
This appears to have been broken since the beginning of time
(e.g., it is not a regression where create_symref() stopped
calling die() or something similar).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching changes from a depot using a full client spec, there
is no need to perform as many queries as there are top-level paths
in the client spec. Instead we query all changes in chronological
order, also getting rid of the need to sort the results and remove
duplicates.
Signed-off-by: Sam Hocevar <sam@hocevar.net>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When submitting from a repository that was cloned using a client spec,
use the full list of paths when ruling out files that are outside the
view. This fixes a bug where only files pertaining to the first path
would be included in the p4 submit.
Signed-off-by: Sam Hocevar <sam@hocevar.net>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"format-patch" has learned a new option to zero-out the commit
object name on the mbox "From " line.
* bc/format-patch-null-from-line:
format-patch: check that header line has expected format
format-patch: add an option to suppress commit hash
sha1_file.c: introduce a null_oid constant
|
|
When getpwuid() on the system returned NULL (e.g. the user is not
in the /etc/passwd file or other uid-to-name mappings), the
codepath to find who the user is to record it in the reflog barfed
and died. Loosen the check in this codepath, which already accepts
questionable ident string (e.g. host part of the e-mail address is
obviously bogus), and in general when we operate fmt_ident() function
in non-strict mode.
* jk/ident-loosen-getpwuid:
ident: loosen getpwuid error in non-strict mode
ident: keep a flag for bogus default_email
ident: make xgetpwuid_self() a static local helper
|
|
Improve error reporting when SMTP TLS fails.
* jk/send-email-ssl-errors:
send-email: enable SSL level 1 debug output
|
|
The completion script (in contrib/) used to list "git column"
(which is not an end-user facing command) as one of the choices
* sg/completion-no-column:
completion: remove 'git column' from porcelain commands
|
|
Add new config to avoid typing "--recurse-submodules" on each push.
* mc/push-recurse-submodules-config:
push: follow the "last one wins" convention for --recurse-submodules
push: test that --recurse-submodules on command line overrides config
push: add recurseSubmodules config option
|
|
On Windows, when writing to a pipe fails, errno is always
EINVAL. However, Git expects it to be EPIPE.
According to the documentation, there are two cases in which write()
triggers EINVAL: the buffer is NULL, or the length is odd but the mode
is 16-bit Unicode (the broken pipe is not mentioned as possible cause).
Git never sets the file mode to anything but binary, therefore we know
that errno should actually be EPIPE if it is EINVAL and the buffer is
not NULL.
See https://msdn.microsoft.com/en-us/library/1570wh78.aspx for more
details.
This works around t5571.11 failing with v2.6.4 on Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://ozlabs.org/~paulus/gitk:
gitk: sv.po: Update Swedish translation (311t)
gitk: Let .bleft.mid widgets 'breathe'
gitk: Match ttk fonts to gitk fonts
gitk: Update revision date in Japanese PO file
gitk: Update "Language:" header
gitk: Improve translation message
gitk: Remove unused line
gitk: Update year
gitk: Change last translator line
gitk: Update fuzzy messages
gitk: Update Japanese translation
gitk: Fix translation around copyright sign
gitk: Update Japanese translation
gitk: Fix wrong translation
gitk: Translate Japanese catalog
gitk: Translate more to Japanese catalog
gitk: Update Japanese message catalog
gitk: Re-sync line number in Japanese message catalogue
gitk: Color name update
|
|
Update 66 translations (2477t0f0u) for git v2.7.0-rc0.
Reviewed-by: Ray Chen <oldsharp@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of git://github.com/alexhenrie/git-po:
l10n: ca.po: update translation
|
|
* 'fr_v2.7.0' of git://github.com/jnavila/git:
l10n: fr v2.7.0 round 1 (2477t)
|
|
* 'master' of git://github.com/alshopov/git-po:
l10n: Updated Bulgarian translation of git (2477t,0f,0u)
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
|