| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), a line was introduced which contained
multiple statements. This is difficult to read so break it into multiple
lines.
While we're at it, follow this convention for the rest of the
__git_main() and break up lines that contain multiple statements.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The completion for 'git stash' has not changed in a major way since it
was converted from shell script to builtin. Now that it's a builtin, we
can take advantage of the groundwork laid out by parse-options and use
the generated options.
Rewrite _git_stash() to take use __gitcomp_builtin() to generate
completions for subcommands.
The main `git stash` command does not take any arguments directly. If no
subcommand is given, it automatically defaults to `git stash push`. This
means that we can simplify the logic for when no subcommands have been
given yet. We only have to offer subcommand completions when we're
completing a non-option after "stash".
One area that this patch could improve upon is that the `git stash list`
command accepts log-options. It would be nice if the completion for this
were unified with that of _git_log() and _git_show() which would allow
completions to be provided for options such as `--pretty` but that is
outside the scope of this patch.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To save a level of indentation, perform an early return in the "if" arm
so we can move the "else" code out of the block.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many completion functions perform hardcoded comparisons with $cword.
This fails in the case where the main git command is given arguments
(e.g. `git -C . bundle<TAB>` would fail to complete its subcommands).
Even _git_worktree(), which uses __git_find_on_cmdline(), could still
fail. With something like `git -C add worktree move<TAB>`, the
subcommand would be incorrectly identified as "add" instead of "move".
Assign $__git_subcommand_idx in __git_main(), where the git subcommand
is actually found and the corresponding completion function is called.
Use this variable to replace hardcoded comparisons with $cword.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Disable the recent mergetool's hideresolved feature by default for
backward compatibility and safety.
* jn/mergetool-hideresolved-is-optional:
doc: describe mergetool configuration in git-mergetool(1)
mergetool: do not enable hideResolved by default
|
|
Fix for a topic in 'master'.
* tb/pack-revindex-on-disk:
pack-revindex.c: don't close unopened file descriptors
|
|
l10n for Git 2.31.0 round 2
* tag 'l10n-2.31.0-rnd2' of git://github.com/git-l10n/git-po:
l10n: zh_CN: for git v2.31.0 l10n round 1 and 2
l10n: de.po: Update German translation for Git v2.31.0
l10n: pt_PT: add Portuguese translations part 1
l10n: vi.po(5104t): for git v2.31.0 l10n round 2
l10n: es: 2.31.0 round 2
l10n: Add translation team info
l10n: start Indonesian translation
l10n: zh_TW.po: v2.31.0 round 2 (15 untranslated)
l10n: bg.po: Updated Bulgarian translation (5104t)
l10n: fr: v2.31 rnd 2
l10n: tr: v2.31.0-rc1
l10n: sv.po: Update Swedish translation (5104t0f0u)
l10n: git.pot: v2.31.0 round 2 (9 new, 8 removed)
l10n: tr: v2.31.0-rc0
l10n: sv.po: Update Swedish translation (5103t0f0u)
l10n: pl.po: Update translation
l10n: fr: v2.31.0 rnd 1
l10n: git.pot: v2.31.0 round 1 (155 new, 89 removed)
l10n: Update Catalan translation
l10n: ru.po: update Russian translation
|
|
Translate 161 new messages (5104t0f0u) for git 2.31.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of github.com:vnwildman/git:
l10n: vi.po(5104t): for git v2.31.0 l10n round 2
|
|
* 'l10n/zh_TW/210301' of github.com:l10n-tw/git-po:
l10n: zh_TW.po: v2.31.0 round 2 (15 untranslated)
|
|
* 'po-id' of github.com:bagasme/git-po:
l10n: Add translation team info
l10n: start Indonesian translation
|
|
* 'master' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
* 'russian-l10n' of github.com:DJm00n/git-po-ru:
l10n: ru.po: update Russian translation
|
|
* 'pt-PT' of github.com:git-l10n-pt-PT/git-po:
l10n: pt_PT: add Portuguese translations part 1
|
|
In particular, this describes mergetool.hideResolved, which can help
users discover this setting (either because it may be useful to them
or in order to understand mergetool's behavior if they have forgotten
setting it in the past).
Tested by running
make -C Documentation git-mergetool.1
man Documentation/git-mergetool.1
and reading through the page.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 98ea309b3f (mergetool: add hideResolved configuration,
2021-02-09) introduced the mergetool.hideResolved setting to reduce
the clutter in viewing non-conflicted sections of files in a
mergetool, it enabled it by default, explaining:
No adverse effects were noted in a small survey of popular mergetools[1]
so this behavior defaults to `true`.
In practice, alas, adverse effects do appear. A few issues:
1. No indication is shown in the UI that the base, local, and remote
versions shown have been modified by additional resolution. This
is inherent in the design: the idea of mergetool.hideResolved is to
convince a mergetool that expects pristine local, base, and remote
files to show partially resolved verisons of those files instead;
there is no additional source of information accessible to the
mergetool to see where the resolution has happened.
(By contrast, a mergetool generating the partial resolution from
conflict markers for itself would be able to hilight the resolved
sections with a different color.)
A user accustomed to seeing the files without partial resolution
gets no indication that this behavior has changed when they upgrade
Git.
2. If the computed merge did not line up the files correctly (for
example due to repeated sections in the file), the partially
resolved files can be misleading and do not have enough information
to reconstruct what happened and compute the correct merge result.
3. Resolving a conflict can involve information beyond the textual
conflict. For example, if the local and remote versions added
overlapping functionality in different ways, seeing the full
unresolved versions of each alongside the base gives information
about each side's intent that makes it possible to come up with a
resolution that combines those two intents. By contrast, when
starting with partially resolved versions of those files, one can
produce a subtly wrong resolution that includes redundant extra
code added by one side that is not needed in the approach taken
on the other.
All that said, a user wanting to focus on textual conflicts with
reduced clutter can still benefit from mergetool.hideResolved=true as
a way to deemphasize sections of the code that resolve cleanly without
requiring any changes to the invoked mergetool. The caveats described
above are reduced when the user has explicitly turned this on, because
then the user is aware of them.
Flip the default to 'false'.
Reported-by: Dana Dahlstrom <dahlstrom@google.com>
Helped-by: Seth House <seth@eseth.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to fsck objects received across multiple packs during a
single git fetch session has been broken when the packfile URI
feature was in use. A workaround has been added by disabling the
codepath to avoid keeping a packfile that is too small.
* jt/transfer-fsck-across-packs-fix:
fetch-pack: do not mix --pack_header and packfile uri
|
|
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Phillip Szelat <phillip.szelat@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
* Newlines corrected.
* Add concept translation table.
* Translated some.
* Corrected some.
* Corrected some 'Negation of Emptiness'.
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Signed-off-by: Christopher Diaz Riveros <christopher.diaz.riv@gmail.com>
|
|
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
|
|
* Initialize PO file
* Translate init-db.c
* Translate wt-status.c
* Translate builtin/clone.c
* Translate builtin/checkout.c
* Translate builtin/fetch.c
* Complete core translations:
* builtin/remote.c
* builtin/index-pack.c
* push.c
* reset.c
* Sync with l10n upstream
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
|
|
When fetching (as opposed to cloning) from a repository with packfile
URIs enabled, an error like this may occur:
fatal: pack has bad object at offset 12: unknown object type 5
fatal: finish_http_pack_request gave result -1
fatal: fetch-pack: expected keep then TAB at start of http-fetch output
This bug was introduced in b664e9ffa1 ("fetch-pack: with packfile URIs,
use index-pack arg", 2021-02-22), when the index-pack args used when
processing the inline packfile of a fetch response and when processing
packfile URIs were unified.
This bug happens because fetch, by default, partially reads (and
consumes) the header of the inline packfile to determine if it should
store the downloaded objects as a packfile or loose objects, and thus
passes --pack_header=<...> to index-pack to inform it that some bytes
are missing. However, when it subsequently fetches the additional
packfiles linked by URIs, it reuses the same index-pack arguments, thus
wrongly passing --index-pack-arg=--pack_header=<...> when no bytes are
missing.
This does not happen when cloning because "git clone" always passes
do_keep, which instructs the fetch mechanism to always retain the
packfile, eliminating the need to read the header.
There are a few ways to fix this, including filtering out pack_header
arguments when downloading the additional packfiles, but I decided to
stick to always using index-pack throughout when packfile URIs are
present - thus, Git no longer needs to read the bytes, and no longer
needs --pack_header here.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Yi-Jyun Pan <pan93412@gmail.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
* 'fr_next' of github.com:jnavila/git:
l10n: fr: v2.31 rnd 2
|
|
* 'master' of github.com:nafmo/git-l10n-sv:
l10n: sv.po: Update Swedish translation (5104t0f0u)
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There were some early changes in the 2.31 cycle to optimize some setup
in diffcore-rename.c[1], some later changes to measure performance[2],
and finally some significant changes to improve rename detection
performance. The final one was merged with the note
Performance optimization work on the rename detection continues.
That works for the commit log, but feels misleading as a release note
since all the changes were within one cycle. Simplify this to just
Performance improvements for rename detection.
The former wording could be seen as hinting that more performance
improvements will come in 2.32, which is true, but we can just cover
those in the 2.32 release notes when the time comes.
[1] a5ac31b5b1 (Merge branch 'en/diffcore-rename', 2021-01-25)
[2] d3a035b055 (Merge branch 'en/merge-ort-perf', 2021-02-11)
[3] 12bd17521c (Merge branch 'en/diffcore-rename', 2021-03-01)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Work around platforms whose open() is reported to return EINTR (it
shouldn't, as we do our signals with SA_RESTART).
* jk/open-returns-eintr:
config.mak.uname: enable OPEN_RETURNS_EINTR for macOS Big Sur
Makefile: add OPEN_RETURNS_EINTR knob
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
* https://github.com/prati0100/git-gui:
Revert "git-gui: remove lines starting with the comment character"
|
|
Signed-off-by: Emir Sarı <bitigchi@me.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Generate po/git.pot from v2.31.0-rc1 for git v2.31.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of github.com:git/git: (63 commits)
Git 2.31-rc1
Hopefully the last batch before -rc1
Revert "commit-graph: when incompatible with graphs, indicate why"
read-cache: make the index write buffer size 128K
dir: fix malloc of root untracked_cache_dir
commit-graph.c: display correct number of chunks when writing
doc/reftable: document how to handle windows
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
...
|
|
This commit causes breakage on macOS, or in fact any platform using
older versions of Tcl. Revert it.
* py/revert-commit-comments:
Revert "git-gui: remove lines starting with the comment character"
|
|
This reverts commit b9a43869c9f96d3577d6f568c1bda1940c8f0e31.
This commit causes breakage on macOS (10.13). It causes errors on
startup and completely breaks the commit functionality. There are two
main problems. First, it uses `string cat` which is not supported on
older Tcl versions. Second, it does a half close of the bidirectional
pipe to git-stripspace which is also not supported on older Tcl
versions.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Emir Sarı <bitigchi@me.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An under-allocation for the untracked cache data has been corrected.
* jh/untracked-cache-fix:
dir: fix malloc of root untracked_cache_dir
|
|
Raise the buffer size used when writing the index file out from
(obviously too small) 8kB to (clearly sufficiently large) 128kB.
* ns/raise-write-index-buffer-size:
read-cache: make the index write buffer size 128K
|
|
The logic to handle "trailer" related placeholders in the
"--format=" mechanisms in the "log" family and "for-each-ref"
family is getting unified.
* hv/trailer-formatting:
ref-filter: use pretty.c logic for trailers
pretty.c: capture invalid trailer argument
pretty.c: refactor trailer logic to `format_set_trailers_options()`
t6300: use function to test trailer options
|
|
Documentation update.
* hn/reftable-tables-doc-update:
doc/reftable: document how to handle windows
|
|
Test script modernization.
* sv/t7001-modernize:
t7001: use `test` rather than `[`
t7001: use here-docs instead of echo
t7001: put each command on a separate line
t7001: use '>' rather than 'touch'
t7001: avoid using `cd` outside of subshells
t7001: remove whitespace after redirect operators
t7001: modernize subshell formatting
t7001: remove unnecessary blank lines
t7001: indent with TABs instead of spaces
t7001: modernize test formatting
|
Denton Liu
Junio C Hamano
Jiang Xin
Jonathan Nieder
Matthias Rüster
Daniel Santos
Tran Ngoc Quan
Christopher Diaz Riveros
Bagas Sanjaya
Jonathan Tan
Yi-Jyun Pan
Alexander Shopov
Elijah Newren
Jean-Noël Avila
Emir Sarı
Peter Krefting
Pratyush Yadav