| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Mark the newly added test which creates test files on-disk as
EXPENSIVE_ON_WINDOWS. According to [1] it takes almost ten minutes to
run this test file on Windows after this recent change, but just a few
seconds on Linux as noted in my [2].
This could be done faster by exiting earlier, however by using this
pattern we'll emit "skip" lines for each skipped test, making it clear
we're not running a lot of them in the TAP output, at the cost of some
overhead.
1. nycvar.QRO.7.76.6.1801061337020.1337@wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet
(https://public-inbox.org/git/nycvar.QRO.7.76.6.1801061337020.1337@wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet/)
2. 87mv1raz9p.fsf@evledraar.gmail.com
(https://public-inbox.org/git/87mv1raz9p.fsf@evledraar.gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an EXPENSIVE_ON_WINDOWS prerequisite to mark those tests which are
very expensive to run on Windows, but cheap elsewhere.
Certain tests that heavily stress the filesystem or run a lot of shell
commands are disproportionately expensive on Windows, this
prerequisite will later be used by a tests that runs in 4-8 seconds on
a modern Linux system, but takes almost 10 minutes on Windows.
There's no reason to skip such tests by default on other platforms,
but Windows users shouldn't need to wait around while they finish.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has never been any full roundtrip testing of what git-ls-files
and other commands that use wildmatch() actually do, rather we've been
satisfied with just testing the underlying C function.
Due to git-ls-files and friends having their own codepaths before they
call wildmatch() there's sometimes differences in the behavior between
the two. Even when we test for those (as with [1]), there was no one
place where you can review how these two modes differ.
Now there is. We now attempt to create a file called $haystack and
match $needle against it for each pair of $needle and $haystack that
we were passing to test-wildmatch.
If we can't create the file we skip the test. This ensures that we can
run this on all platforms and not maintain some infinitely growing
whitelist of e.g. platforms that don't support certain characters in
filenames.
A notable exception to this is Windows, where due to the reasons
explained in [2] the shellscript emulation layer might fake the
creation of a file such as "*", and "test -e" for it will succeed
since it just got created with some character that maps to "*", but
git ls-files won't be fooled by this.
Thus we need to skip creating certain filenames entirely on Windows,
the list here might be overly aggressive. I don't have access to a
Windows system to test this.
As a result of doing these tests we can now see the cases where these
two ways of testing wildmatch differ:
* Creating a file called 'a[]b' and running ls-files 'a[]b' will show
that file, but wildmatch("a[]b", "a[]b") will not match
* wildmatch() won't match a file called \ against \, but ls-files
will.
* `git --glob-pathspecs ls-files 'foo**'` will match a file
'foo/bba/arr', but wildmatch won't, however pathmatch will.
This seems like a bug to me, the two are otherwise equivalent as
these tests show.
This also reveals the case discussed in [1], since 2.16.0 '' is now an
error as far as ls-files is concerned, but wildmatch() itself happily
accepts it.
1. 9e4e8a64c2 ("pathspec: die on empty strings as pathspec",
2017-06-06)
2. nycvar.QRO.7.76.6.1801052133380.1337@wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet
(https://public-inbox.org/git/?q=nycvar.QRO.7.76.6.1801052133380.1337%40wbunaarf-fpuvaqryva.tvgsbejvaqbjf.bet)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite the wildmatch() test suite so that each test now tests all
combinations of the wildmatch() WM_CASEFOLD and WM_PATHNAME flags.
Before this change some test inputs were not tested on
e.g. WM_PATHNAME. Now the function is stress tested on all possible
inputs, and for each input we declare what the result should be if the
mode is case-insensitive, or pathname matching, or case-sensitive or
not matching pathnames.
Also before this change, nothing was testing case-insensitive
non-pathname matching, so I've added that to test-wildmatch.c and made
use of it.
This yields a rather scary patch, but there are no functional changes
here, just more test coverage. Some now-redundant tests were deleted
as a result of this change, since they were now duplicating an earlier
test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use of ! should be reserved for non-git programs that are assumed not
to fail, see README. With this change only
t/t0110-urlmatch-normalization.sh is still using this anti-pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the unused fnmatch() test parameter from the wildmatch
test. The code that used to test this was removed in 70a8fc999d ("stop
using fnmatch (either native or compat)", 2014-02-15).
As a --word-diff shows the only change to the body of the tests is the
removal of the second out of four parameters passed to match().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a pattern from the nul_match() function in t7008-grep-binary.sh to
make sure that we don't just fall through to the "else" if there's an
unknown parameter.
This is something I added in commit 77f6f4406f ("grep: add a test
helper function for less verbose -f \0 tests", 2017-05-20) to grep
tests, which were modeled on these wildmatch tests, and I'm now
porting back to the original wildmatch tests.
I am not using the "say '...'; exit 1" pattern from t0000-basic.sh
because if I fail I want to run the rest of the tests (unless under
-i), and doing this makes sure we do that and don't exit right away
without fully reporting our errors.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't try to vertically align the test output, which is futile anyway
under the TAP output where we're going to be emitting a number for
each test without aligning the test count.
This makes subsequent changes of mine where I'm not going to be
aligning this output as I add new tests easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the wildmatch test to use more standard shell style, usually we
use "if test" not "if [".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace the 4-width mixed space & tab indentation in this file with
indentation with tabs as we do in most of the rest of our tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final step to make an empty string as a pathspec element
illegal. We started this by first deprecating and warning a
pathspec that has such an element in 2.11 (Nov 2016).
Hopefully we can merge this down to the 'master' by the end of the
year? A deprecation warning period that is about 1 year does not
sound too bad.
* ex/deprecate-empty-pathspec-as-match-all:
pathspec: die on empty strings as pathspec
t0027: do not use an empty string as a pathspec element
|
|
A recent regression in "git rebase -i" that broke execution of git
commands from subdirectories via "exec" insn has been fixed.
* jk/rebase-i-exec-gitdir-fix:
sequencer: pass absolute GIT_DIR to exec commands
|
|
Doc update.
* cn/diff-indent-no-longer-is-experimental:
diff: --indent-heuristic is no longer experimental
|
|
A broken access to object databases in recent update to "git grep
--recurse-submodules" has been fixed.
* bw/grep-recurse-submodules:
grep: take the read-lock when adding a submodule
|
|
We try to see if somebody runs our test suite with a shell that
does not support "local" like bash/dash does.
* mh/test-local-canary:
t0000: check whether the shell supports the "local" keyword
|
|
"git status --ignored -u" did not stop at a working tree of a
separate project that is embedded in an ignored directory and
listed files in that other project, instead of just showing the
directory itself as ignored.
* js/submodule-in-excluded:
status: do not get confused by submodules in excluded directories
|
|
"git commit", after making a commit, did not check for errors when
asking on what branch it made the commit, which has been correted.
* ao/check-resolve-ref-unsafe-result:
commit: check result of resolve_ref_unsafe
|
|
Some codepaths did not check for errors when asking what branch the
HEAD points at, which have been fixed.
* jk/misc-resolve-ref-unsafe-fixes:
worktree: handle broken symrefs in find_shared_symref()
log: handle broken HEAD in decoration check
remote: handle broken symrefs
test-ref-store: avoid passing NULL to printf
|
|
Instead of using custom line comparison and hashing functions to
implement "moved lines" coloring in the diff output, use the pair
of these functions from lower-layer xdiff/ code.
* sb/diff-color-moved-use-xdl-recmatch:
diff.c: get rid of duplicate implementation
xdiff-interface: export comparing and hashing strings
|
|
The experimental "color moved lines differently in diff output"
feature was buggy around "ignore whitespace changes" edges, whihch
has been corrected.
* jk/diff-color-moved-fix:
diff: handle NULs in get_string_hash()
diff: fix whitespace-skipping with --color-moved
t4015: test the output of "diff --color-moved -b"
t4015: check "negative" case for "-w --color-moved"
t4015: refactor --color-moved whitespace test
|
|
"auto" as a value for the columnar output configuration ought to
judge "is the output consumed by humans?" with the same criteria as
"auto" for coloured output configuration, i.e. either the standard
output stream is going to tty, or a pager is in use. We forgot the
latter, which has been fixed.
* kd/auto-col-with-pager-fix:
column: do not include pager.c
column: show auto columns when pager is active
|
|
Calling cmd_foo() as if it is a general purpose helper function is
a no-no. Correct two instances of such to set an example.
* jc/no-cmd-as-subroutine:
merge-ours: do not use cmd_*() as a subroutine
describe: do not use cmd_*() as a subroutine
|
|
An earlier update made it possible to use an on-stack in-core
lockfile structure (as opposed to having to deliberately leak an
on-heap one). Many codepaths have been updated to take advantage
of this new facility.
* ma/lockfile-fixes:
read_cache: roll back lock in `update_index_if_able()`
read-cache: leave lock in right state in `write_locked_index()`
read-cache: drop explicit `CLOSE_LOCK`-flag
cache.h: document `write_locked_index()`
apply: remove `newfd` from `struct apply_state`
apply: move lockfile into `apply_state`
cache-tree: simplify locking logic
checkout-index: simplify locking logic
tempfile: fix documentation on `delete_tempfile()`
lockfile: fix documentation on `close_lock_file_gently()`
treewide: prefer lockfiles on the stack
sha1_file: do not leak `lock_file`
|
|
This heuristic has been the default since 2.14 so we should not confuse our
users by saying that it's experimental and off by default.
Signed-off-by: Carlos Martín Nieto <cmn@dwim.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With --recurse-submodules, we add each submodule that we encounter to
the list of alternate object databases. With threading, our changes to
the list are not protected against races. Indeed, ThreadSanitizer
reports a race when we call `add_to_alternates_memory()` around the same
time that another thread is reading in the list through
`read_sha1_file()`.
Take the grep read-lock while adding the submodule. The lock is used to
serialize uses of non-thread-safe parts of Git's API, including
`read_sha1_file()`.
Helped-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we replaced the old shell script based interactive rebase in
commmit 18633e1a22a6 ("rebase -i: use the rebase--helper builtin",
2017-02-09) we introduced a regression of functionality in that the
GIT_DIR would be sent to the environment of the exec command as-is.
This generally meant that it would be passed as "GIT_DIR=.git", which
causes problems for any exec command that wants to run git commands in
a subdirectory.
This isn't a very large regression, since it is not that likely that the
exec command will run a git command, and even less likely that it will
need to do so in a subdir. This regression was discovered by a build
system which uses git-describe to find the current version of the build
system, and happened to do so from the src/ sub directory of the
project.
Fix this by passing in the absolute path of the git directory into the
child environment.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test balloon to see if we get complaints from anybody who is
using a shell that doesn't support the "local" keyword. If so, this
test can be reverted. If not, we might want to consider using "local"
in shell code throughout the git code base.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n for Git 2.15.0 round 2 with Catalan updates
* tag 'l10n-2.15.0-rnd2.1' of git://github.com/git-l10n/git-po:
l10n: Update Catalan translation
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc flow fix.
* sg/rev-list-doc-reorder-fix:
rev-list-options.txt: use correct directional reference
|
|
Doc markup fix.
* sb/rev-parse-show-superproject-root:
docs: fix formatting of rev-parse's --show-superproject-working-tree
|
|
A possible oom error is now caught as a fatal error, instead of
continuing and dereferencing NULL.
* ao/path-use-xmalloc:
path.c: use xmalloc() in add_to_trie()
|
|
Doc update.
* np/config-path-doc:
config doc: clarify "git config --path" example
|
|
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The descriptions of the options '--parents', '--children' and
'--graph' say "see 'History Simplification' below", although the
referred section is in fact above the description of these options.
Send readers in the right direction by saying "above" instead of
"below".
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Transactions to update multiple references that involves a deletion
was quite broken in an error codepath and did not abort everything
correctly.
* mh/ref-locking-fix:
files_transaction_prepare(): fix handling of ref lock failure
t1404: add a bunch of tests of D/F conflicts
|
|
We meticulously pass the `exclude` flag to the `treat_directory()`
function so that we can indicate that files in it are excluded rather
than untracked when recursing.
But we did not yet treat submodules the same way.
Because of that, `git status --ignored --untracked` with a submodule
`submodule` in a gitignored `tracked/` would show the submodule in the
"Untracked files" section, e.g.
On branch master
Untracked files:
(use "git add <file>..." to include in what will be committed)
tracked/submodule/
Ignored files:
(use "git add -f <file>..." to include in what will be committed)
tracked/submodule/initial.t
Instead, we would want it to show the submodule in the "Ignored files"
section:
On branch master
Ignored files:
(use "git add -f <file>..." to include in what will be committed)
tracked/submodule/
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The implementations in diff.c to detect moved lines needs to compare
strings and hash strings, which is implemented in that file, as well
as in the xdiff library.
Remove the rather recent implementation in diff.c and rely on the well
exercised code in the xdiff lib.
With this change the hash used for bucketing the strings for the moved
line detection changes from FNV32 (that is provided via the hashmaps
memhash) to DJB2 (which is used internally in xdiff). Benchmarks found
on the web[1] do not indicate that these hashes are different in
performance for readable strings.
[1] https://softwareengineering.stackexchange.com/questions/49550/which-hashing-algorithm-is-best-for-uniqueness-and-speed
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will turn out to be useful in a later patch.
xdl_recmatch is exported in xdiff/xutils.h, to be used by various
xdiff/*.c files, but not outside of xdiff/. This one makes it available
to the outside, too.
While at it, add documentation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add usage of xmalloc() instead of malloc() in add_to_trie() as xmalloc wraps
and checks memory allocation result.
Signed-off-by: Andrey Okoshkin <a.okoshkin@samsung.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since dc39e09942 (files_ref_store: use a transaction to update packed
refs, 2017-09-08), failure to lock a reference has been handled
incorrectly by `files_transaction_prepare()`. If
`lock_ref_for_update()` fails in the lock-acquisition loop of that
function, it sets `ret` then breaks out of that loop. Prior to
dc39e09942, that was OK, because the only thing following the loop was
the cleanup code. But dc39e09942 added another blurb of code between
the loop and the cleanup. That blurb sometimes resets `ret` to zero,
making the cleanup code think that the locking was successful.
Specifically, whenever
* One or more reference deletions have been processed successfully in
the lock-acquisition loop. (Processing the first such reference
causes a packed-ref transaction to be initialized.)
* Then `lock_ref_for_update()` fails for a subsequent reference. Such
a failure can happen for a number of reasons, such as the old SHA-1
not being correct, lock contention, etc. This causes a `break` out
of the lock-acquisition loop.
* The `packed-refs` lock is acquired successfully and
`ref_transaction_prepare()` succeeds for the packed-ref transaction.
This has the effect of resetting `ret` back to 0, and making the
cleanup code think that lock acquisition was successful.
In that case, any reference updates that were processed prior to
breaking out of the loop would be carried out (loose and packed), but
the reference that couldn't be locked and any subsequent references
would silently be ignored.
This can easily cause data loss if, for example, the user was trying
to push a new name for an existing branch while deleting the old name.
After the push, the branch could be left unreachable, and could even
subsequently be garbage-collected.
This problem was noticed in the context of deleting one reference and
creating another in a single transaction, when the two references D/F
conflict with each other, like
git update-ref --stdin <<EOF
delete refs/foo
create refs/foo/bar HEAD
EOF
This triggers the above bug because the deletion is processed
successfully for `refs/foo`, then the D/F conflict causes
`lock_ref_for_update()` to fail when `refs/foo/bar` is processed. In
this case the transaction *should* fail, but instead it causes
`refs/foo` to be deleted without creating `refs/foo`. This could
easily result in data loss.
The fix is simple: instead of just breaking out of the loop, jump
directly to the cleanup code. This fixes some tests in t1404 that were
added in the previous commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is currently not allowed, in a single transaction, to add one
reference and delete another reference if the two reference names D/F
conflict with each other (e.g., like `refs/foo/bar` and `refs/foo`).
The reason is that the code would need to take locks
$GIT_DIR/refs/foo.lock
$GIT_DIR/refs/foo/bar.lock
But the latter lock couldn't coexist with the loose reference file
$GIT_DIR/refs/foo
, because `$GIT_DIR/refs/foo` cannot be both a directory and a file at
the same time (hence the name "D/F conflict).
Add a bunch of tests that we cleanly reject such transactions.
In fact, many of the new tests currently fail. They will be fixed in
the next commit along with an explanation.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n for Git 2.15.0 round 2
* tag 'l10n-2.15.0-rnd2' of git://github.com/git-l10n/git-po: (22 commits)
l10n: zh_CN: review for git v2.15.0 l10n round 2
l10n: zh_CN: for git v2.15.0 l10n round 2
l10n: de.po: fix typos
l10n: de.po: translate 70 new messages
l10n: ru.po: update Russian translation
l10n: vi.po(3245t): Updated Vietnamese translation for v2.15.0 round 2
l10n: sv.po: Update Swedish translation (3245t0f0u)
l10n: fr.po: v2.15.0 round 2
l10n: fr.po change translation of "First, rewinding"
l10n: fr.po fix some mistakes
l10n: Update Catalan translation
l10n: ko.po: Update Korean translation
l10n: es.po: v2.15.0 round 2
l10n: git.pot: v2.15.0 round 2 (2 new, 2 removed)
l10n: ru.po: update Russian translation
l10n: bg.po: Updated Bulgarian translation (3245t)
l10n: sv.po: Update Swedish translation (3245t0f0u)
l10n: vi.po(3245t): Updated Vietnamese translation for v2.15.0
l10n: es.po: Update translation v2.15.0 round 1
l10n: git.pot: v2.15.0 round 1 (68 new, 36 removed)
...
|
|
* 'jx/zh_CN-proposed' of github.com:jiangxin/git:
l10n: zh_CN: review for git v2.15.0 l10n round 2
l10n: zh_CN: for git v2.15.0 l10n round 2
|
|
Signed-off-by: Ray Chen <oldsharp@gmail.com>
|
|
Translate 69 messages (3245t0f0u) for git v2.15.0-rc2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: 依云 <lilydjwg@gmail.com>
|
|
* 'master' of https://github.com/ralfth/git-po-de:
l10n: de.po: fix typos
l10n: de.po: translate 70 new messages
|
|
Everything this file needs from the pager API (e.g. term_columns(),
pager_in_use()) is already declared in the header file it includes.
Noticed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Junio C Hamano
Carlos Martín Nieto
Martin Ågren
Jacob Keller
Michael Haggerty
Jordi Mas
Sebastian Schuberth
SZEDER Gábor
Johannes Schindelin
Stefan Beller
Andrey Okoshkin
Jiang Xin
Ray Chen