| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Earlier we made "rev-list --object-edge" more aggressively list the
objects at the edge commits, in order to reduce number of objects
fetched into a shallow repository, but the change affected cases
other than "fetching into a shallow repository" and made it
unusably slow (e.g. fetching into a normal repository should not
have to suffer the overhead from extra processing). Limit it to a
more specific case by introducing --objects-edge-aggressive, a new
option to rev-list.
* bc/fetch-thin-less-aggressive-in-normal-repository:
pack-objects: use --objects-edge-aggressive for shallow repos
rev-list: add an option to mark fewer edges as uninteresting
Documentation: add missing article in rev-list-options.txt
|
|
* sb/doc-submitting-patches-keep-notes:
SubmittingPatches: explain rationale for using --notes with format-patch
|
|
* rs/simplify-transport-get:
transport: simplify duplicating a substring in transport_get() using xmemdupz()
|
|
* rs/simplify-parsing-commit-tree-S:
commit-tree: simplify parsing of option -S using skip_prefix()
|
|
* rs/plug-strbuf-leak-in-merge:
merge: release strbuf after use in suggest_conflicts()
|
|
* rs/plug-strbuf-leak-in-lock-ref:
refs: plug strbuf leak in lock_ref_sha1_basic()
|
|
"git checkout-index --temp=$target $path" did not work correctly
for paths outside the current subdirectory in the project.
* es/checkout-index-temp:
checkout-index: fix --temp relative path mangling
t2004: demonstrate broken relative path printing
t2004: standardize file naming in symlink test
t2004: drop unnecessary write-tree/read-tree
t2004: modernize style
|
|
The logic in "git bisect bad HEAD" etc. to avoid forcing the test
of the common ancestor of bad and good commits was broken.
* cc/bisect-rev-parsing:
bisect: add test to check that revs are properly parsed
bisect: parse revs before passing them to check_expected_revs()
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* maint-2.1:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* maint-2.0:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* maint-1.9:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* maint-1.8.5:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* jk/dotgit-case-maint-1.8.5:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* bw/maint-0090-awk-tweak:
t0090: tweak awk statement for Solaris /usr/xpg4/bin/awk
|
|
The sample pre-push hook used customized IFS=' ' for no good reason.
* jh/pre-push-sample-no-custom-ifs:
pre-push.sample: remove unnecessary and misleading IFS=' '
|
|
Using the exit status of the last command in the prompt, e.g.
PS1='$(__git_ps1) $? ', did not work well because the helper
function stomped on the exit status.
* tf/prompt-preserve-exit-status:
git-prompt: preserve value of $? inside shell prompt
|
|
* sb/dco-indentation-fix:
Documentation/SubmittingPatches: unify whitespace/tabs for the DCO
|
|
Simplify the procedure to generate unicode table.
* bb/update-unicode-table:
update_unicode.sh: delete the command group
update_unicode.sh: make the output structure visible
update_unicode.sh: shorten uniset invocation path
update_unicode.sh: set UNICODE_DIR only once
update_unicode.sh: simplify output capture
|
|
Squelch useless compiler warnings on Mac OS X.
* es/squelch-openssl-warnings-on-macosx:
git-compat-util: suppress unavoidable Apple-specific deprecation warnings
|
|
* sb/t5400-remove-unused:
t5400: remove dead code
|
|
"git send-email" normally identifies itself via X-Mailer: header
in the message it sends out. A new command line flag allows the
user to squelch the header.
* lh/send-email-hide-x-mailer:
test/send-email: --[no-]xmailer tests
send-email: add --[no-]xmailer option
|
|
"git send-email" did not handle RFC 2047 encoded headers quite
right.
* rd/send-email-2047-fix:
send-email: handle adjacent RFC 2047-encoded words properly
send-email: align RFC 2047 decoding more closely with the spec
|
|
The top-of-the-file instruction for completion scripts (in contrib/)
did not name the files correctly.
* pd/completion-filenames-fix:
Update documentation occurrences of filename .sh
|
|
"git add -i" did not notice when the interactive command input
stream went away and kept asking.
* jk/add-i-read-error:
add--interactive: leave main loop on read error
|
|
Traditionally we tried to avoid interpreting date strings given by
the user as future dates, e.g. GIT_COMMITTER_DATE=2014-12-10 when
used early November 2014 was taken as "October 12, 2014" because it
is likely that a date in the future, December 10, is a mistake.
Loosen this and do not tiebreak by future-ness of the date when
(1) ISO-like format is used, and
(2) the string can make sense interpreted as both y-m-d and y-d-m.
* jk/approxidate-avoid-y-d-m-over-future-dates:
approxidate: allow ISO-like dates far in the future
pass TIME_DATE_NOW to approxidate future-check
|
|
Newer libCurl knows how to talk IMAP; "git imap-send" has been
updated to use this instead of a hand-rolled OpenSSL calls.
* br/imap-send-via-libcurl:
git-imap-send: use libcurl for implementation
|
|
* br/imap-send-verbosity:
imap-send: use parse options API to determine verbosity
|
|
The lockfile API can get confused which file to clean up when the
process moved the $cwd after creating a lockfile.
* nd/lockfile-absolute:
lockfile.c: store absolute path
|
|
The get_merge_bases*() API was easy to misuse by careless
copy&paste coders, leaving object flags tainted in the commits that
needed to be traversed.
* jc/merge-bases:
get_merge_bases(): always clean-up object flags
bisect: clean flags after checking merge bases
|
|
The commented output used to blindly add a SP before the payload
line, resulting in "# \t<indented text>\n" when the payload began
with a HT. Instead, produce "#\t<indented text>\n".
* jc/strbuf-add-lines-avoid-sp-ht-sequence:
strbuf_add_commented_lines(): avoid SP-HT sequence in commented lines
|
|
Fix long-standing bug in "diff -B -M" output.
* jc/diff-b-m:
diff -B -M: fix output for "copy and then rewrite" case
|
|
Allow "git clone --reference" to be used more safely.
* jc/clone-borrow:
clone: --dissociate option to mark that reference is only temporary
|
|
The report from "git checkout" on a branch that builds on another
local branch by setting its branch.*.merge to branch name (not a
full refname) incorrectly said that the upstream is gone.
* jc/checkout-local-track-report:
checkout: report upstream correctly even with loosely defined branch.*.merge
|
|
While here, also change grammatically poor "three dash lines" to
"three-dash line".
Suggested-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't just reset, but release the resource held by the local
variable that is about to go out of scope.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our is_hfs_dotgit function relies on the hackily-implemented
next_hfs_char to give us the next character that an HFS+
filename comparison would look at. It's hacky because it
doesn't implement the full case-folding table of HFS+; it
gives us just enough to see if the path matches ".git".
At the end of next_hfs_char, we use tolower() to convert our
32-bit code point to lowercase. Our tolower() implementation
only takes an 8-bit char, though; it throws away the upper
24 bits. This means we can't have any false negatives for
is_hfs_dotgit. We only care about matching 7-bit ASCII
characters in ".git", and we will correctly process 'G' or
'g'.
However, we _can_ have false positives. Because we throw
away the upper bits, code point \u{0147} (for example) will
look like 'G' and get downcased to 'g'. It's not known
whether a sequence of code points whose truncation ends up
as ".git" is meaningful in any language, but it does not
hurt to be more accurate here. We can just pass out the full
32-bit code point, and compare it manually to the upper and
lowercase characters we care about.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running for example "git bisect bad HEAD" or
"git bisect good master", the parameter passed to
"git bisect (bad|good)" has to be parsed into a
commit hash before checking if it is the expected
commit or not.
We could do that in is_expected_rev() or in
check_expected_revs(), but it is already done in
bisect_state(). Let's just store the hash values
that result from this parsing, and then reuse
them after all the parsing is done.
This way we can also use a for loop over these
values to call bisect_write() on them, instead of
using eval.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
checkout-index --temp only properly prints relative paths which are
descendants of the current directory. Paths in ancestor or sibling
directories (or their children) are often printed in mangled form. For
example:
mkdir a bbb &&
>file &&
>bbb/file &&
git update-index --add file bbb/file &&
cd a &&
git checkout-index --temp ../file ../bbb/file
prints:
.merge_file_ooblek le
.merge_file_igloo0 b/file
rather than the correct:
.merge_file_ooblek ../file
.merge_file_igloo0 ../bbb/file
Internally, given the above example, checkout-index prefixes each input
argument with the name of the current directory ("a/", in this case),
and then assumes that it can simply skip forward by strlen("a/") bytes
to recover the original name. This works for files in the current
directory or its descendants, but fails for files in ancestors or
siblings (or their children) due to path normalization.
For instance, given "../file", "a/" is prepended, giving "a/../file".
Path normalization folds out "a/../", resulting in "file". Attempting
to recover the original name by skipping strlen("a/") bytes gives the
incorrect "le" rather than the desired "../file".
Fix this by taking advantage of write_name_quoted_relative() to recover
the original name properly, rather than assuming that it can be
recovered by skipping strlen(prefix) bytes.
As a bonus, this also fixes a bug in which checkout-index --temp
accessed and printed memory beyond the end-of-string. For instance,
within a subdirectory named "subdirectory", and given argument
"../file", prefixing would give "subdirectory/../file", which would
become "file" after normalization. checkout-index would then attempt to
recover the original name by skipping strlen("subdirectory/") bytes of
"file", which placed it well beyond end-of-string. Despite this error,
it often appeared to give the correct result, but only due to an
accident of implementation which left an apparently correct copy of the
path in memory following the normalized value. In particular, handed
"subdirectory/../file", in-place processing by normalize_path_copy_len()
resulted in "file\0rectory/../file". When checkout-index skipped
strlen("subdirectory/") bytes, it ended up back at "../file" and thus
appeared to give the correct answer, despite being past end-of-string.
Reported-by: Russ Cox <rsc@golang.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
checkout-index --temp only properly prints relative paths which are
descendants of the current directory. Paths in ancestor or sibling
directories (or their children) are often printed in mangled form. For
example:
mkdir a bbb &&
>file &&
>bbb/file &&
git update-index --add file bbb/file &&
cd a &&
git checkout-index --temp ../file ../bbb/file
prints:
.merge_file_ooblek le
.merge_file_igloo0 b/file
rather than the correct:
.merge_file_ooblek ../file
.merge_file_igloo0 ../bbb/file
Unfortunately, testing is complicated slightly by relative paths
sometimes _appearing_ to be printed correctly, but this is an accident
of implementation in which a "correct" copy of the string exists in
memory beyond the end of the real string, and that "correct" copy gets
printed. This test takes care to avoid the accidentally "correct"
behavior by testing with a filename longer than the directory name in
which checkout-index is invoked.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update "symlink" test to use the common file naming scheme so that its
temporary files can be cleaned up by the "rm -f path*" idiom employed by
other tests in this script.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unlike earlier tests which reference several trees prepared by "setup",
no other tests utilize the tree from the "symlink" test, so there is no
need to write it (or read it back immediately).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In particular:
* indent test body
* place test description on same line as test_expect_*
* place closing quote on its own line
* name output file "actual" rather than "out"
* name setup test "setup" rather than "preparation"
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'for-junio' of git://bogomips.org/git-svn:
git-svn: support for git-svn propset
|
|
When fetching into or pushing from a shallow repository, we want to
aggressively mark edges as uninteresting, since this decreases the pack
size. However, aggressively marking edges can negatively affect
performance on large non-shallow repositories with lots of refs.
Teach pack-objects a --shallow option to indicate that we're pushing
from or fetching into a shallow repository. Use
--objects-edge-aggressive only for shallow repositories and otherwise
use --objects-edge, which performs better in the general case. Update
the callers to pass the --shallow option when they are dealing with a
shallow repository.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit fbd4a70 (list-objects: mark more commits as edges in
mark_edges_uninteresting - 2013-08-16), we marked an increasing number
of edges uninteresting. This change, and the subsequent change to make
this conditional on --objects-edge, are used by --thin to make much
smaller packs for shallow clones.
Unfortunately, they cause a significant performance regression when
pushing non-shallow clones with lots of refs (23.322 seconds vs.
4.785 seconds with 22400 refs). Add an option to git rev-list,
--objects-edge-aggressive, that preserves this more aggressive behavior,
while leaving --objects-edge to provide more performant behavior.
Preserve the current behavior for the moment by using the aggressive
option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Eric Sunshine
René Scharfe
Jeff King
Christian Couder
brian m. carlson