| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When making a partial commit, git-commit uses git-ls-files with
the --error-unmatch option to expand and sanity check the user
supplied path patterns. When any path pattern does not match
with the paths known to the index, it errors out, in order to
catch a common mistake to say "git commit Makefiel cache.h"
and end up with a commit that touches only cache.h (notice the
misspelled "Makefile"). This detection however does not work
well when the path has already been removed from the index.
If you drop a path from the index and try to commit that
partially, i.e.
$ git rm COPYING
$ git commit -m 'Remove COPYING' COPYING
the command complains because git does not know anything about
COPYING anymore.
This introduces a new option --with-tree to git-ls-files and
uses it in git-commit when we build a temporary index to
write a tree object for the partial commit.
When --with-tree=<tree-ish> option is specified, names from the
given tree are added to the set of names the index knows about,
so we can treat COPYING file in the example as known.
Of course, there is no reason to use "git rm" and git-aware
people have long time done:
$ rm COPYING
$ git commit -m 'Remove COPYING' COPYING
which works just fine. But this caused a constant confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
stash: end index commit log with a newline
git-commit: Disallow amend if it is going to produce an empty non-merge commit
git-send-email.perl: Add angle brackets to In-Reply-To if necessary
Fix a test failure (t9500-*.sh) on cygwin
|
|
* sp/maint-no-thin:
Make --no-thin the default in git-push to save server resources
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was no newline at the end of the index commit message, putting
the shell prompt at its end after a 'git cat-file commit $id'. This is
similar to what was fixed in 843103d69388a5c74ed99753e1c162a66835b04d.
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Right now one can amend the last non-merge commit using a dirty index
and in the process maybe cause the last commit to have the same tree
as its parent. In such a case one would want to discard the last commit
instead of amending it.
This reverts commit 8588452ceb78b1da17652ba03f9942ef740e07ea.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although message-id by defintion should have surrounding angle
brackets, there is no point forcing people to type them in.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On filesystems where it is appropriate to set core.filemode
to false, test 29 ("commitdiff(0): mode change") fails when
git-commit does not notice a file (execute) permission change.
A fix requires noting the new file execute permission in the
index with a "git update-index --chmod=+x", prior to the commit.
Add a function (note_chmod) which implements this idea, and
insert a call in each test that modifies the x permission.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/archive:
archive - leakfix for format_subst()
Define NO_MEMMEM on Darwin as it lacks the function
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/maint-no-thin:
Make --no-thin the default in git-push to save server resources
fix doc for --compression argument to pack-objects
git-tag -s must fail if gpg cannot sign the tag.
|
|
1) pushes happen less often than fetches, so the bandwidth saving is
much less visible in that case overall.
2) thin packs have to be complemented with missing delta bases to be
valid, so many received thin packs will take more disk space.
3) the bother of repacking should be distributed amongst "clients"
i.e. fetchers and pushers as much as possible, and not the server
being fetched or pushed, to keep disk and CPU usage low on the
server.
This is why a fetch should get thin packs but a push should not.
Both Nico and I have been assuming that --no-thin was the default
behavior of git-push ever since Nico introduced --fix-thin into the
index-pack process, which allowed fetch and receive-pack to avoid
exploding packfiles received during transfer. This patch finally
makes it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove obsolete details (core.legacyheaders is always true now).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of this patch code and message was written by Shawn O. Pearce.
I made some tests to know what the problem was, and then I changed
the code related with the SIGPIPE signal.
If the user has misconfigured `user.signingkey` in their .git/config
or just doesn't have any secret keys on their keyring and they ask
for a signed tag with `git tag -s` we better make sure the resulting
tag was actually signed by gpg.
Prior versions of builtin git-tag allowed this failure to slip
by without error as they were not checking the return value of
the finish_command() so they did not notice when gpg exited with
an error exit status. They also did not fail if gpg produced an
empty output or if read_in_full received an error from the read
system call while trying to read the pipe back from gpg.
Finally, we did not actually honor any return value from the do_sign
function as it returns ssize_t but was being stored into an unsigned
long. This caused the compiler to optimize out the die condition,
allowing git-tag to continue along and create the tag object.
However, when gpg gets a wrong username, it exits before any read was done
and then the writing process receives SIGPIPE and program is terminated.
By ignoring this signal, anyway, the function write_or_die gets EPIPE from
write_in_full and exits returning 0 to the system without a message.
Here we better call to write_in_full directly so we can fail
printing a message and return safely to the caller.
With these issues fixed `git-tag -s` will now fail to create the
tag and will report a non-zero exit status to its caller, thereby
allowing automated helper scripts to detect (and recover from)
failure if gpg is not working properly.
Proposed-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-svn: understand grafts when doing dcommit
git-diff: don't squelch the new SHA1 in submodule diffs
git-svn: fix "Malformed network data" with svn:// servers
(cvs|svn)import: Ask git-tag to overwrite old tags.
Documentation / grammer nit
|
|
Use the rev-list --parents functionality to read the parents
of the commit. cat-file only shows the raw object with the
original parents and doesn't take into account grafts; so
we'll rely on rev-list machinery for the smarts here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to squelch empty diffs introduced by commit
fb13227e089f22dc31a3b1624559153821056848 would inadvertently
populate filespec "two" of a submodule change using the uninitialized
(null) SHA1, thereby replacing the submodule SHA1 by 0{40} in the output.
This change teaches diffcore_skip_stat_unmatch to handle
submodule changes correctly.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a workaround for the reparent function not working
correctly on the SVN native protocol servers. This workaround
opens a new connection (SVN::Ra object) to the new
URL/directory.
Since libsvn appears limited to only supporting one connection
at a time, this workaround invalidates the Git::SVN::Ra object
that is $self inside gs_fetch_loop_common(). So we need to
restart that connection once all the fetching is done for each
loop iteration to be able to run get_log() successfully.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the tag was moved in CVS or SVN history, it will be moved in the
imported history as well. Tag history is not tracked.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The extra shift here causes failure to parse any commandline including
the -C option.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass --whitespace=<option> to git-apply. Since git-apply and git-am
expect this, I'm always surprised when I try to give it to git-rebase
and it doesn't work.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we're counting, a smaller number is 'fewer' not 'less'
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As suggested by Junio and Johannes, change the name of the former
attribute specfile to export-subst to indicate its function rather
than purpose and to make clear that it is not applied to working tree
files.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"%PLCHLDR" (take 2)
As suggested by Johannes, --pretty=format: placeholders in specfiles
need to be wrapped in $Format:...$ now. This syntax change restricts
the expansion of placeholders and makes it easier to use with files
that contain non-placeholder percent signs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
memmem() is a nice GNU extension for searching a length limited string
in another one.
This compat version is based on the version found in glibc 2.2 (GPL 2);
I only removed the optimization of checking the first char by hand, and
generally tried to keep the code simple. We can add it back if memcmp
shows up high in a profile, but for now I prefer to keep it (almost
trivially) simple.
Since I don't really know which platforms beside those with a glibc
have their own memmem(), I used a heuristic: if NO_STRCASESTR is set,
then NO_MEMMEM is set, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'master' of git://repo.or.cz/git/git-p4:
git-p4: Added support for automatically importing newly appearing perforce branches.
git-p4: Cleanup; moved the (duplicated) code for turning a branch into a git ref (for example foo -> refs/remotes/p4/<project>/foo) into a separate method.
git-p4: Cleanup; moved the code for the initial #head or revision import into a separate function, out of P4Sync.run.
git-p4: Cleanup; Turn self.revision into a function local variable (it's not used anywhere outside the function).
git-p4: Cleanup; moved the code to import a list of p4 changes using fast-import into a separate member function of P4Sync.
git-p4: Cleanup; moved the code for getting a sorted list of p4 changes for a list of given depot paths into a standalone method.
git-p4: After submission to p4 always synchronize from p4 again (into refs/remotes). Whether to rebase HEAD or not is still left as question to the end-user.
git-p4: Always call 'p4 sync ...' before submitting to Perforce.
|
|
* maint:
Include a git-push example for creating a remote branch
Cleanup unnecessary file modifications in t1400-update-ref
Makefile: Add cache-tree.h to the headers list
Don't allow contrib/workdir/git-new-workdir to trash existing dirs
git-apply: do not read past the end of buffer
|
|
Many users get confused when `git push origin master:foo` works
when foo already exists on the remote repository but are confused
when foo doesn't exist as a branch and this form does not create
the branch foo.
This new example highlights the trick of including refs/heads/
in front of the desired branch name to create a branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Kristian Høgsberg pointed out that the two file modifications
we were doing during the 'creating initial files' step are not even
used within the test suite. This was actually confusing as we do
not even need these changes for the tests to pass. All that really
matters here is the specific commit dates are used so that these
appear in the branch's reflog, and that the dates are different so
that the branch will update when asked and the reflog entry is
also updated. There is no need for the file modification.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The dependency was missing.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently I found that doing a sequence like the following:
git-new-workdir a b
...
git-new-workdir a b
by accident will cause a (and now also b) to have an infinite cycle
in its refs directory. This is caused by git-new-workdir trying
to create the "refs" symlink over again, only during the second
time it is being created within a's refs directory and is now also
pointing back at a's refs.
This causes confusion in git as suddenly branches are named things
like "refs/refs/refs/refs/refs/refs/refs/heads/foo" instead of the
more commonly accepted "refs/heads/foo". Plenty of commands start
to see ambiguous ref names and others just take ages to compute.
git-clone has the same safety check, so git-new-workdir should
behave just like it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the preimage we are patching is shorter than what the patch
text expects, we tried to match the buffer contents at the
"original" line with the fragment in full, without checking we
have enough data to match in the preimage. This caused the size
of a later memmove() to wrap around and attempt to scribble
almost the entire address space. Not good.
The code that follows the part this patch touches tries to match
the fragment with line offsets. Curiously, that code does not
have the problem --- it guards against reading past the end of
the preimage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ds/sendmail:
send-email: Add support for SSL and SMTP-AUTH
|
|
A function intended to be called from builtins updating refs
by locking them before write, specially those that came from
scripts using "git update-ref".
[jc: with minor fixups]
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
convert_sha1_file() became unused by the previous patch -- remove it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for a new attribute, specfile. Files marked as being
specfiles are expanded by git-archive when they are written to an
archive. It has no effect on worktree files. The same placeholders
as those for the option --pretty=format: of git-log et al. can be
used.
The attribute is useful for creating auto-updating specfiles. It is
limited by the underlying function format_commit_message(), though.
E.g. currently there is no placeholder for git-describe like output,
and expanded specfiles can't contain NUL bytes. That can be fixed
in format_commit_message() later and will then benefit users of
git-log, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Drop the parameter "msg" of format_commit_message() (as it can be
inferred from the parameter "commit"), add a parameter "template"
in order to avoid accessing the static variable user_format
directly and export the result.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
branches.
If a change in a p4 "branch" appears that hasn't seen any previous commit and
that has a known branch mapping we now try to import it properly. First we
find the p4 change of the source branch that the new p4 branch is based on. Then
we using git rev-list --bisect to locate the corresponding git commit to that change.
Finally we import all changes in the new p4 branch up to the current change and resume
with the regular import.
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
ref (for example foo -> refs/remotes/p4/<project>/foo) into a separate method.
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
into a separate function, out of P4Sync.run.
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
used anywhere outside the function).
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
fast-import into a separate member function of P4Sync.
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
a list of given depot paths into a standalone method.
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
refs/remotes). Whether to rebase HEAD or not is still left as question to the end-user.
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
Acked-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-by: Thiago Macieira <thiago@kde.org>
|
|
Allows username and password to be given using --smtp-user
and --smtp-pass. SSL use is flagged by --smtp-ssl. These are
backed by corresponding defaults in the git configuration file.
This implements Junio's 'mail identity' suggestion in a slightly
more generalised manner. --identity=$identity, backed by
sendemail.identity indicates that the configuration subsection
[sendemail "$identity"] should take priority over the [sendemail]
section for all configuration values.
Signed-off-by: Douglas Stockwell <doug@11011.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
HPA noticed that yum does not like the newer git RPM set; it turns out
that we do not ship git-p4 anymore but existing installations do not
realize the package is gone if we do not tell anything about it.
David Kastrup suggests using Obsoletes in the spec file of the new
RPM to replace the old package, so here is a try.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
Junio C Hamano
Robert Boone
Jean-Luc Herren
Dmitry V. Levin
David Kastrup
Ramsay Jones
Shawn O. Pearce
Nicolas Pitre
Carlos Rica
Eric Wong
Sven Verdoolaege
Michael Smith
J. Bruce Fields
Mike Ralphson
René Scharfe
Simon Hausmann
Douglas Stockwell