| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Current svn-fe produces output like this:
blob
mark :7382321
data 5
hello
blob
mark :7382322
data 5
Hello
commit
mark :3
[...]
M 100644 :7382321 hello.c
M 100644 :7382322 hello2.c
This means svn-fe has to keep track of the paths modified in each
commit and the corresponding marks, instead of dealing with each file
as it arrives in input and then forgetting about it. A better
strategy would be to use inline blobs:
commit
mark :3
[...]
M 100644 inline hello.c
data 5
hello
[...]
As a first step towards that, teach svn-fe to notice when the
collection of blobs for each commit starts and write a comment
("# commit 3.") there.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This way, a person can use
svnadmin dump $path |
svn-fe |
git fast-import --relative-marks --export-marks=svn-revs
to get a list of what commit corresponds to each svn revision (plus
some irrelevant blob names) in .git/info/fast-import/svn-revs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Prepare to use mark :5 for the commit corresponding to r5 (and so on).
1 billion seems sufficiently high for blob marks to avoid conflicting
with rev marks, while still leaving room for 3 billion blobs. Such
high mark numbers cause trouble with ancient fast-import versions, but
this topic cannot support git fast-import versions before 1.7.4 (which
introduces the cat-blob command) anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Set up some plumbing: teach the svndump lib to pass a file descriptor
number to the fast_export lib, representing where cat-blob/ls
responses can be read from, and add a get_response_line helper
function to the fast_export lib to read a line from that file.
Unfortunately this means that svn-fe needs file descriptor 3 to be
redirected from somewhere (preferrably the cat-blob stream of a
fast-import backend); otherwise it will fail:
$ svndump <path> | svn-fe
fatal: cannot read from file descriptor 3: Bad file descriptor
For the moment, "svn-fe 3</dev/null" works as a workaround but it
will not work for very long. A fast-import backend that can retrieve
old commits is needed in order to be able to fulfill svn
"Node-copyfrom-rev" requests that refer to revs from a previous run.
[jn: with new change description]
Based-on-patch-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
The line_buffer library silently flags input errors until
buffer_deinit time; unfortunately, by that point usually errno is
invalid. Expose the error flag so callers can check for and
report errors early for easy debugging.
some_error_prone_operation(...);
if (buffer_ferror(buf))
return error("input error: %s", strerror(errno));
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Restrict the repo_tree API to functions that are actually needed.
- decouple reading the mode and content of dirents from other
operations.
- remove repo_modify_path. It is only used to read the mode from
dirents.
- remove the ability to use repo_read_mode on a missing path. The
existing code only errors out in that case, anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
svn-fe processes each commit in two stages: first decide on the
correct content for all paths and export the relevant blobs, then
export a commit with the result.
But we can keep less state and simplify svn-fe a great deal by
exporting the commit in one step: use 'inline' blobs for each path and
remember nothing. This way, the repo_tree structure could be
eliminated, and we would get support for incremental imports 'for
free'.
Reorganize handle_node along these lines. This is just a code
cleanup; the changes in repo_tree and handle_revision will come later.
[db: backported to apply without text delta support]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
The repo_tree structure remembers, for each path in each revision, a
mode (regular file, executable, symlink, or directory) and content
(blob mark or directory structure). Maintaining a second copy of all
this information when it's already in the target repository is
wasteful, it does not persist between svn-fe invocations, and most
importantly, there is no convenient way to transfer it from one
machine to another. So it would be nice to get rid of it.
As a first step, let's change the repo_tree API to match fast-import's
read commands more closely. Currently to read the mode for a path,
one uses
repo_modify_path(path, new_mode, new_content);
which changes the mode and content as a side effect. There is no
function to read the content at a path; add one.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
The dereference() function to peel a tree-ish and find the underlying
tree expects arithmetic to (void *) to work on byte addresses. We
should be reading the text of objects through a char * anyway.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
* git://github.com/gitster/git:
vcs-svn: Allow change nodes for root of tree (/)
vcs-svn: Implement Prop-delta handling
vcs-svn: Sharpen parsing of property lines
vcs-svn: Split off function for handling of individual properties
vcs-svn: Make source easier to read on small screens
vcs-svn: More dump format sanity checks
vcs-svn: Reject path nodes without Node-action
vcs-svn: Delay read of per-path properties
vcs-svn: Combine repo_replace and repo_modify functions
vcs-svn: Replace = Delete + Add
vcs-svn: handle_node: Handle deletion case early
vcs-svn: Use mark to indicate nodes with included text
vcs-svn: Unclutter handle_node by introducing have_props var
vcs-svn: Eliminate node_ctx.mark global
vcs-svn: Eliminate node_ctx.srcRev global
vcs-svn: Check for errors from open()
vcs-svn: Allow simple v3 dumps (no deltas yet)
Conflicts:
t/t9010-svn-fe.sh
vcs-svn/svndump.c
|
|
It can sometimes be useful to write information temporarily to file,
to read back later. These functions allow a program to use the
line_buffer facilities when doing so.
It works like this:
1. find a unique filename with buffer_tmpfile_init.
2. rewind with buffer_tmpfile_rewind. This returns a stdio
handle for writing.
3. when finished writing, declare so with
buffer_tmpfile_prepare_to_read. The return value indicates
how many bytes were written.
4. read whatever portion of the file is needed.
5. if finished, remove the temporary file with buffer_deinit.
otherwise, go back to step 2,
The svn support would use this to buffer the postimage from delta
application until the length is known and fast-import can receive
the resulting blob.
Based-on-patch-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Based-on-patch-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
buffer_read_char can be used in place of buffer_read_string(1) to
avoid consuming valuable static buffer space. The delta applier will
use this to read variable-length integers one byte at a time.
Underneath, it is fgetc, wrapped so the line_buffer library can
maintain its role as gatekeeper of input.
Later it might be worth checking if fgetc_unlocked is faster ---
most line_buffer functions are not thread-safe anyway.
Helpd-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
buffer_read_string works well for non line-oriented input except for
one problem: it does not tell the caller how many bytes were actually
written. This means that unless one is very careful about checking
for errors (and eof) the calling program cannot tell the difference
between the string "foo" followed by an early end of file and the
string "foo\0bar\0baz".
So introduce a variant that reports the length, too, a thinner wrapper
around strbuf_fread. Its result is written to a strbuf so the caller
does not need to keep track of the number of bytes read.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
POSIX makes the behavior of read(2) from a pipe fairly clear: a read
from an empty pipe will block until there is data available and any
other read will not block, prefering to return a partial result.
Likewise, fread(3) and fgets(3) are clearly specified to act as
though implemented by calling fgetc(3) in a simple loop. But the
buffering behavior of fgetc is less clear.
Luckily, no sane platform is going to implement fgetc by calling the
equivalent of read(2) more than once. fgetc has to be able to
return without filling its buffer to preserve errno when errors are
encountered anyway. So let's assume the simpler behavior (trust) but
add some tests to catch insane platforms that violate that when they
come (verify).
First check that fread can handle a 0-length read from an empty fifo.
Because open(O_RDONLY) blocks until the writing end is open, open the
writing end of the fifo in advance in a subshell.
Next try short inputs from a pipe that is not filled all the way.
Lastly (two tests) try very large inputs from a pipe that will not fit
in the relevant buffers. The first of these tests reads a little
more than 8192 bytes, which is BUFSIZ (the size of stdio's buffers)
on this Linux machine. The second reads a little over 64 KiB (the
pipe capacity on Linux) and is not run unless requested by setting
the GIT_REMOTE_SVN_TEST_BIG_FILES environment variable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Do not expect an implicit newline after each input record.
Use a separate command to exercise buffer_skip_bytes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Split the line_buffer test into small pieces and move it to its
own file as preparation for adding more tests.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Imitate the input format of test-obj-pool to support arbitrary
sequences of commands rather than alternating read/copy. This should
make it easier to add tests that exercise other line_buffer functions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Collect the line_buffer state in a newly public line_buffer struct.
Callers can use multiple line_buffers to manage input from multiple
files at a time.
svn-fe's delta applier will use this to stream a delta from svnrdump
and the preimage it applies to from fast-import at the same time.
The tests don't take advantage of the new features, but I think that's
okay. It is easier to find lingering examples of nonreentrant code by
searching for "static" in line_buffer.c.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Prepare for the line_buffer lib to support input from multiple files,
by collecting global state in a struct that can be easily passed
around.
No API change yet.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
obj_pool is inherently global and does not use the standard growing
factor alloc_nr, which makes it feel out of place in the git codebase.
Plus it is overkill for this application: all that is needed is a
buffer that can grow between requests to accomodate larger strings.
Use a strbuf instead.
As a side effect, this improves the error handling: allocation
failures will result in a clean exit instead of segfaults. It would
be nice to add a test case (using ulimit or failmalloc) but that can
wait for another day.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
The data stored in byte_buffer[] is always either discarded or
written to stdout immediately. No need for it to persist between
function calls.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Lazy fast-import frontend authors that want to rely on the backend to
keep track of the content of the imported trees _almost_ have what
they need in the 'cat-blob' command (v1.7.4-rc0~30^2~3, 2010-11-28).
But it is not quite enough, since
(1) cat-blob can be used to retrieve the content of files, but
not their mode, and
(2) using cat-blob requires the frontend to keep track of a name
(mark number or object id) for each blob to be retrieved
Introduce an 'ls' command to complement cat-blob and take care of the
remaining needs. The 'ls' command finds what is at a given path
within a given tree-ish (tag, commit, or tree):
'ls' SP <dataref> SP <path> LF
or in fast-import's active commit:
'ls' SP <path> LF
The response is a single line sent through the cat-blob channel,
imitating ls-tree output. So for example:
FE> ls :1 Documentation
gfi> 040000 tree 9e6c2b599341d28a2a375f8207507e0a2a627fe9 Documentation
FE> ls 9e6c2b599341d28a2a375f8207507e0a2a627fe9 git-fast-import.txt
gfi> 100644 blob 4f92954396e3f0f97e75b6838a5635b583708870 git-fast-import.txt
FE> ls :1 RelNotes
gfi> 120000 blob b942e499449d97aeb50c73ca2bdc1c6e6d528743 RelNotes
FE> cat-blob b942e499449d97aeb50c73ca2bdc1c6e6d528743
gfi> b942e499449d97aeb50c73ca2bdc1c6e6d528743 blob 32
gfi> Documentation/RelNotes/1.7.4.txt
The most interesting parts of the reply are the first word, which is
a 6-digit octal mode (regular file, executable, symlink, directory,
or submodule), and the part from the second space to the tab, which is
a <dataref> that can be used in later cat-blob, ls, and filemodify (M)
commands to refer to the content (blob, tree, or commit) at that path.
If there is nothing there, the response is "missing some/path".
The intent is for this command to be used to read files from the
active commit, so a frontend can apply patches to them, and to copy
files and directories from previous revisions.
For example, proposed updates to svn-fe use this command in place of
its internal representation of the repository directory structure.
This simplifies the frontend a great deal and means support for
resuming an import in a separate fast-import run (i.e., incremental
import) is basically free.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: clarify -u<mode> option defaults
|
|
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t/t7500-commit.sh: use test_cmp instead of test
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
gitweb/gitweb.perl: don't call S_ISREG() with undef
gitweb/gitweb.perl: remove use of qw(...) as parentheses
|
|
Change commit_msg_is() in t/t7500-commit.sh to use test_cmp instead of
the shell's test function. Now if a test fails we'll get test_cmp
output showing us what failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because '--immediate' stops test suite after first error, therefore in
this mode
test_debug 'cat gitweb.log'
was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.
Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).
This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.
This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:
gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.
Which caused the Git test suite to fail on this test:
./t9500-gitweb-standalone-no-errors.sh (Wstat: 256 Tests: 90 Failed: 84)
Failed tests: 1-8, 10-36, 38-45, 47-48, 50-88
Non-zero exit status: 1
Reported-by: perl 5.13.9
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.
The issue is that perl will now warn about this:
$ perl -wE 'for my $i qw(a b) { say $i }'
Use of qw(...) as parentheses is deprecated at -e line 1.
a
b
This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:
./t9501-gitweb-standalone-http-status.sh (Wstat: 256 Tests: 11 Failed: 10)
Failed tests: 2-11
Non-zero exit status: 1
./t9502-gitweb-standalone-parse-output.sh (Wstat: 256 Tests: 10 Failed: 9)
Failed tests: 2-10
Non-zero exit status: 1
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
parse_tag_buffer(): do not prefixcmp() out of range
|
|
* maint-1.7.3:
|
|
* maint-1.7.2:
fast-import: introduce "feature notes" command
fast-import: clarify documentation of "feature" command
|
|
* maint-1.7.1:
fast-import: introduce "feature notes" command
fast-import: clarify documentation of "feature" command
|
|
* maint-1.7.0:
fast-import: introduce "feature notes" command
fast-import: clarify documentation of "feature" command
|
|
There is a check (size < 64) at the beginning of the function, but
that only covers object+type lines.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
pull: do not display fetch usage on --help-all
git-tag.txt: list all modes in the description
commit,status: describe -u likewise
add: describe --patch like checkout, reset
commit,merge,tag: describe -m likewise
clone,init: describe --template using the same wording
commit,status: describe --porcelain just like push
commit,tag: use same wording for -F
configure: use AC_LANG_PROGRAM consistently
string_list_append: always set util pointer to NULL
correct type of EMPTY_TREE_SHA1_BIN
|
|
Currently, "git pull --help-all" displays the fetch usage info.
Make it equivalent to "git pull -h" instead since "--help-all" is
documented in gitcli(7).
Do not try to sanitize the pull option parser (aka last hair puller).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the description sounds as if it applied always, but most of
its content is true in "create tag mode" only.
Make this clearer by listing all modes upfront.
Also, sneak in some linguistic improvements and make it clearer that
lightweight tags are "created" because "written" may be misread as
"are output".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They differ by one character only. Being exactly equal should help
translations.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also removes the superfluous "specify" and rewords the misleading
"if any" which sounds as if omitting "-m" would omit the merge commit
message. (It means "if a merge commit is created at all".)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also corrects a wrong description for clone.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Push has the clearer description, so take that one for all.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 83c90314aa27ae3768c04375d02e4f3fb12b726d, which
seems to have broken merge to report conflicts when there should be
none.
|
|
Avoid warnings from Autoconf 2.68 about missing use of AC_LANG_PROGRAM
and friends.
Quoting autoconf-2.68/NEWS:
** The macros AC_PREPROC_IFELSE, AC_COMPILE_IFELSE, AC_LINK_IFELSE, and
AC_RUN_IFELSE now warn if the first argument failed to use
AC_LANG_SOURCE or AC_LANG_PROGRAM to generate the conftest file
contents. A new macro AC_LANG_DEFINES_PROVIDED exists if you have
a compelling reason why you cannot use AC_LANG_SOURCE but must
avoid the warning.
The underlying reason for that change is that AC_LANG_{SOURCE,PROGRAM}
take care to supply the previously computed set of #defines (and
include standard headers if so desired) for preprocessed languages
like C and C++.
In some cases, AC_LANG_PROGRAM is already used but not sufficiently
m4-quoted, so we just need to add another set of [quotes] to prevent
the autoconf warning from being triggered bogusly. Quoting all
arguments (except when calling special macros that need to be expanded
before recursion) is better style, anyway. These and more rules are
described in detail in 'info Autoconf "Programming in M4"'.
No change in the resulting config.mak.autogen after running
./configure intended.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not immediately obvious that the util field may
contain random bytes after appending an item. Especially
since the string_list_insert* functions _do_ explicitly zero
the util pointer.
This does not appear to be a bug in any current git code, as
all callers either fill in the util field immediately or
never use it. However, it is worth it to be less surprising
to new users of the string-list API who may expect it to be
intialized to NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jonathan Nieder
David Barr
Junio C Hamano
Clemens Buchacher
Ævar Arnfjörð Bjarmason
Nguyễn Thái Ngọc Duy
Michael J Gruber
Ralf Wildenhues
Jeff King