| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This fixes my favorite annoyance with the git rpm packaging: don't pull
in tla when I say yum install git! You wouldn't expect yum install gcc
to pull in gcc-gfortran, right?
With this change, and blanket 'yum update' will automatically pull in the
new 'git' package and push out the old 'git-core', and if the old 'git'
package was installed 'git-all' will be pulled in instead. A couple of
things do break though: 'yum update git-core', because yum behaves
differently when given a specific package name - it doesn't follow obsoletes.
Instead, 'yum install git' will pull in the new git rpm, which will then
push out the old 'git-core'. Similarly, to get the newest version of
the meta package, 'yum install git-all' will install git-all, which then
pushes out the old 'git' meta package.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The output was meant to be a balance of self-explanatory and
terse. In case we have erred too far on the terse side, it
doesn't hurt to explain in more detail what each line means.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous text was correct, but it was easy to miss the
fact that we are talking about "matching" refs. That is, the
text can be parsed as "we push the union of the sets
of remote and local heads" and not "we push the intersection
of the sets of remote and local heads". (The former actually
doesn't make sense if you think about it, since we don't
even _have_ some of those heads). A careful reading would
reveal the correct meaning, but it makes sense to be as
explicit as possible in documentation.
We also explicitly use and introduce the term "matching";
this is a term discussed on the list, and it seems useful
to for users to be able to refer to this behavior by name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing message indicates that an error occured during
push, but it is unclear whether _any_ refs were actually
pushed (even though the status table above shows which were
pushed successfully and which were not, the message "failed
to push" implies a total failure). By indicating that "some
refs" failed, we hopefully indicate to the user that the
table above contains the details.
We could also put in an explicit "see above for details"
message, but it seemed to clutter the output quite a bit
(both on a line of its own, or at the end of the error line,
which inevitably wraps).
This could also be made more fancy if the transport
mechanism passed back more details on how many refs
succeeded and failed:
error: failed to push %d out of %d refs to '%s'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option is accepted, but that is the only form selected-paths
variant of the reset command takes, so there is no point mentioning it.
And while we're at it, use the dashless git call.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 3368d11 (Remove unnecessary git-rm --cached reference from
status output), the status output marks the "Added but not yet
committed" section as "Changes to be committed".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There may still be some entries from the original index that
should be discarded before we show the status. In
particular, if a file was added in the index but not
included in the partial commit, it would still show up in
the status listing as staged for commit.
Ultimately the correct fix is to keep the two states in
separate index_state variables. Then we can avoid having
to reload the cache from the temporary file altogether, and
just point wt_status_print at the correct index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command used a very old fashioned construct to extract
filenames out of diff-index and ended up corrupting the output.
We can simply use --name-only and pipe into --stdin mode of
update-index. It's been like that for the past 2 years or so
since a94d994 (update-index: work with c-quoted name).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
c1795bb (Unify whitespace checking) incorrectly made the
checking function return without incrementing the line numbers
when there is no whitespace problem is found on a '+' line.
This resurrects the earlier behaviour.
Noticed and reported by Jay Soffian. The test script was stolen
from Jay's independent fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a bug in the hg-to-git convertor introduced by commit
1bc7c13af9f936aa80893100120b542338a10bf4: when searching the changeset
parents, 'hg log' returns an extra space at the end of the line, which
confuses the .split(' ') based tokenizer:
Traceback (most recent call last):
File "hg-to-git.py", line 123, in <module>
hgchildren[mparent] += ( str(cset), )
KeyError: ''
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function is intended to be fed one logical line at a time to
inspect, but a QP encoded raw input line can have more than one
lines, just like BASE64 encoded one.
Quoting LF as =0A may be unusual but RFC2045 allows it.
The issue was noticed and fixed by Jay Soffian. JC added a test
to protect the fix from regressing later.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also use "git_config_string" to simplify code where "cmd" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also use "git_config_string" to simplify "config.c" code
where "excludes_file" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also use "git_config_string" to simplify "config.c" code
where "editor_program" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also use "git_config_string" to simplify "config.c" code
where "pager_program" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In many places we just check if a value from the config file is not
NULL, then we duplicate it and return 0. This patch introduces the new
'git_config_string' function to do that.
This function is also used to refactor some code in 'config.c'.
Refactoring other files is left for other patches.
Also not all the code in "config.c" is refactored, because the function
takes a "const char **" as its first parameter, but in many places a
"char *" is used instead of a "const char *". (And C does not allow
using a "char **" instead of a "const char **" without a warning.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not necessary to check if value != NULL before calling
'parse_lldiff_command' as there is already a check inside this
function.
By the way this patch also improves the existing check inside
'parse_lldiff_command' by using:
return config_error_nonbool(var);
instead of:
return error("%s: lacks value", var);
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the tree object we have asked for is deltafied in the packfile and
the delta did not apply correctly or was not able to be decompressed
from the packfile then we can get back NULL instead of the tree data.
This is (part of) the reason why read_sha1_file() can return NULL, so
we need to also handle it the same way.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original problem was that the parsers for configuration files were
getting confused by seeing as nicknames remotes that involved
directory-changing characters. In particular, the branches config file
for ".." was particularly mystifying on platforms that can open
directories and read odd data from them.
The validation function was written by Junio Hamano (with a typo
corrected).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Christian Couder noticed that there still were a handcrafted error()
call that we should have converted to config_error_nonbool() where
parse_lldiff_command() parses the configuration file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests in 't1300-repo-config.sh' did not check what happens when
an empty value like the following is used in the config file:
[emptyvalue]
variable =
Also it was not checked that a variable with no value like the
following:
[novalue]
variable
gives a boolean "true" value, while an ampty value gives a boolean
"false" value.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default value of @mergerx uses \W, which matches a non-word
character; this means that commit messages like "Merging FOO" are not
matched by default; using \b, which matches a word boundary, instead of
\W fixes that.
This change was suggested by Frédéric Brière through
http://bugs.debian.org/463468
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It should be loud and clear.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It makes no sense to suggest "git reset HEAD" since we have
no HEAD commit. This actually used to work but regressed in
f26a0012.
wt_status_print_cached_header was updated to take the whole
wt_status struct rather than just the reference field.
Previously the various code paths were sometimes sending in
s->reference and sometimes sending in NULL, making the
decision on whether this was an initial commit before we
even got to this function. Now we must check the initial
flag here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We used to use "cat-file commit $commit" to extract the original
author information from existing commit, but an earlier commit
5ac2715 (Consistent message encoding while reusing log from an
existing commit) changed it to use "git show -s $commit". If
you have a file in your work tree that can be interpreted as a
valid object name (e.g. "HEAD"), this conversion will not work.
Disambiguate by marking the end of revision parameter on the
comand line with an explicit "--" to fix this.
This breakage is most visible with rebase when a file called
"HEAD" exists in the worktree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git-upload-pack has to spawn git-pack-objects, it has to make sure
that the latter can be found in the PATH. Without this patch an attempt
to clone or pull via ssh from a server fails if the git tools are not in
the standard PATH on the server even though git clone or git pull were
invoked with --upload-pack=/path/to/git-upload-pack.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Due to a typo, the commit subject was shell expanded in the bisect log.
That is, if you had some shell pattern in the commit subject, bisect
would happily put all matching file names into the log.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix '-M' description. Old one reads as if the user can somehow "see"
the default regex when using -M along with -m.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 9c2174350cc0ae0f6bad126e15fe1f9f044117ab.
Nico analyzed and found out that this does not really help, and
I agree with it.
By the time this gets into action and data is actively thrown
away, performance simply goes down the drain due to the data
constantly being reloaded over and over and over and over and
over and over again, to the point of virtually making no
relative progress at all. The previous behavior of enforcing
the memory limit by dynamically shrinking the window size at
least had the effect of allowing some kind of progress, even if
the end result wouldn't be optimal.
And that's the whole point behind this memory limiting feature:
allowing some progress to be made when resources are too limited
to let the repack go unbounded.
|
|
user.{name,email}, core.{pager,editor,excludesfile,whitespace} and
i18n.{commit,logoutput}encoding all expect string values.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
format.suffix expects a string value. format.numbered is bool plus "auto"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
None of the configuration variables this expects is boolean.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
status.color.* and color.status.* expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
core.worktree expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
branch.*.{remote,merge} expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge.default, merge.*.{name,driver} expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
http.sslcert and friends expect a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
help.format configuration expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
alias.* configuration expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diff.external, diff.*.command, diff.color.*, color.diff.* and
diff.*.funcname configuration variables expect a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
filter.*.smudge and filter.*.clean configuration variables expect a
string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
core.gitproxy configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
user.signingkey configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
showbranch.default configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gc.reflogexpire and gc.reflogexpireunreachable configuration expect
a string value suitable for calling approxidate() with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
format.subjectprefix configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
color configuration variables expect a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Kristian Høgsberg
Jeff King
Junio C Hamano
Pieter de Bie
Stelian Pop
Jay Soffian
Christian Couder
Shawn O. Pearce
Daniel Barkalow
Gerrit Pape
Miklos Vajna
Johannes Sixt
Johannes Schindelin
Sergei Organov