| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cmd_show loop resolves tags by showing them, then pointing the
object to the 'tagged' member. However, this object is not fully
initialized; it only contains the SHA1. (This resulted in a segfault
if there were two levels of tags.) We apply parse_object to get a
full object.
Noticed by Kalle Olavi Niemitalo on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rev-parse manpage introduces the branch@{date} syntax,
and mentions the reflog specifically. However, new users may
not be familiar with the distinction between the reflog and
the commit date, so let's help them out with a "you may be
interested in --until" pointer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original sanitization code was just taken from the
remotes2config.sh shell script in contrib.
Credit to Avery Pennarun for noticing this mistake, and Junio
for clarifying the rules for config section names:
Junio C Hamano wrote in <7vfxr23s6m.fsf@gitster.siamese.dyndns.org>:
> In
>
> [foo "bar"] baz = value
>
> foo and baz must be config.c::iskeychar() (and baz must be isalpha()), but
> "bar" can be almost anything.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit ffe256f9bac8a40ff751a9341a5869d98f72c285 ("git-svn: Speed up fetch")
introduced changes that create a temporary file for each object fetched by
svn. These files should be deleted automatically, but perl apparently
doesn't do this until the process exits (or perhaps when its garbage
collector runs).
This means that on a large fetch, especially with lots of branches, we
sometimes fill up /tmp completely, which prevents the next temp file from
being written completely. This is aggravated by the fact that a new temp
file is created for each updated file, even if that update produces a file
identical to one already in git. Thus, it can happen even if there's lots
of disk space to store the finished repository.
We weren't adequately checking for write errors, so this would result in an
invalid file getting committed, which caused git-svn to fail later with an
invalid checksum.
This patch adds a check to syswrite() so similar problems don't lead to
corruption in the future. It also unlink()'s each temp file explicitly
when we're done with it, so the disk doesn't need to fill up.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Tested-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When run in batch mode, git cat-file never frees the memory for the blob
contents it is printing. This quickly adds up and causes git-svn to be
hardly usable for imports of large svn repos, because it uses cat-file in
batch mode and cat-file's memory usage easily reaches several hundred MB
without any good reason.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-config expects a space, not '=' between option and value.
Also, quote the value since it contains globs, which some shells will not
pass through unchanged, or will abort if the glob doesn't expand.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure that buf has enough space to store the trailing \0 of
the command line argument, too.
Signed-off-by: Jochen Voss <voss@seehuhn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.5.5:
GIT 1.5.5.5
GIT 1.5.4.6
git-shell: accept "git foo" form
Conflicts:
GIT-VERSION-GEN
RelNotes
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.5.4:
GIT 1.5.4.6
git-shell: accept "git foo" form
Conflicts:
GIT-VERSION-GEN
RelNotes
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a backport of 0a47dc110e042b5bcc63dc94c8d517e67efe9306
to 'maint' to be included in 1.5.6.2 so that older server side
can accept dashless form of request when clients are updated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff --check" should return non-zero when there was any whitespace
error but the code only paid attention to the error status of the last
new line in the patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The update-hook-example used 'test -f' to check the tag present, which
does not work if the checked reference is packed. This check has been
changed to use 'git rev-parse $tag' instead.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The shell version used to use "mkdir -p" to create the repo
path, but the C version just calls "mkdir". Let's replicate
the old behavior. We have to create the git and worktree
leading dirs separately; while most of the time, the
worktree dir contains the git dir (as .git), the user can
override this using GIT_WORK_TREE.
We can reuse safe_create_leading_directories, but we need to
make a copy of our const buffer to do so. Since
merge-recursive uses the same pattern, we can factor this
out into a global function. This has two other cleanup
advantages for merge-recursive:
1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually
creates bar, but this function just creates the leading
directories.
2. mkdir_p took a mode argument, but it was completely
ignored.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-combine-diff-pre-context:
diff -c/--cc: do not include uninteresting deletion before leading context
|
|
* lt/maint-gitdir-relative:
Make git_dir a path relative to work_tree in setup_work_tree()
|
|
* sb/maint-rebase:
git-rebase.sh: Add check if rebase is in progress
|
|
The "type" and "object" fields for tags were accepted as
valid atoms, but never implemented. Consequently, they
simply returned the empty string, even for valid tags.
Noticed by Lea Wiemann.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Suppose someone fetches git-svn-ified commits from another repo and then
attempts to use 'git-svn init --rewrite-root=foo bar'. Using git svn rebase
after that will fail badly:
* For each commit tried by working_head_info, rebuild is called indirectly.
* rebuild will iterate over all commits and skip all of them because the
URL does not match. Because of that no rev_map file is generated at all.
* Thus, rebuild will run once for every commit. This takes ages.
* In the end there still isn't any rev_map file and thus working_head_info
fails.
Addressing this behaviour fixes an apparently not too uncommon problem with
providing git-svn mirrors of Subversion repositories. Some repositories are
accessed using different URLs depending on whether the user has push
privileges or not. In the latter case, an anonymous URL is often used that
differs from the push URL. Providing a mirror that is usable in both cases
becomes a lot more possible with this change.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The AIX mkstemp will modify it's template parameter to an empty string if
the call fails. This caused a subsequent mkdir to fail.
Signed-off-by: Patrick Higgins <patrick.higgins@cexp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch serves two purposes:
1. test-parse-option.c should be a more complete
example for the parse-options API, and
2. there have been no tests for OPT_CALLBACK,
OPT_DATE, OPT_BIT, OPT_SET_INT and OPT_SET_PTR
before.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add some documentation of basics, macros and callback
implementation of the parse-options API.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an argument for an option is optional, short options don't need a
space between the option and the argument, and long options need a "=".
Otherwise, arguments are misinterpreted.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mention NEED_WORK_TREE flag and command-list.txt.
Fix "bulit-in" typo and AsciiDoc-formatting of a paragraph.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --continue" and friends gave nonsense errors when there is no
rebase in progress.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once we find the absolute paths for git_dir and work_tree, we can make
git_dir a relative path since we know pwd will be work_tree. This should
save the kernel some time traversing the path to work_tree all the time
if git_dir is inside work_tree.
Daniel's patch didn't apply for me as-is, so I recreated it with some
differences, and here are the numbers from ten runs each.
There is some IO for me - probably due to more-or-less random flushing of
the journal - so the variation is bigger than I'd like, but whatever:
Before:
real 0m8.135s
real 0m7.933s
real 0m8.080s
real 0m7.954s
real 0m7.949s
real 0m8.112s
real 0m7.934s
real 0m8.059s
real 0m7.979s
real 0m8.038s
After:
real 0m7.685s
real 0m7.968s
real 0m7.703s
real 0m7.850s
real 0m7.995s
real 0m7.817s
real 0m7.963s
real 0m7.955s
real 0m7.848s
real 0m7.969s
Now, going by "best of ten" (on the assumption that the longer numbers
are all due to IO), I'm saying a 7.933s -> 7.685s reduction, and it does
seem to be outside of the noise (ie the "after" case never broke 8s, while
the "before" case did so half the time).
So looks like about 3% to me.
Doing it for a slightly smaller test-case (just the "arch" subdirectory)
gets more stable numbers probably due to not filling the journal with
metadata updates, so we have:
Before:
real 0m1.633s
real 0m1.633s
real 0m1.633s
real 0m1.632s
real 0m1.632s
real 0m1.630s
real 0m1.634s
real 0m1.631s
real 0m1.632s
real 0m1.632s
After:
real 0m1.610s
real 0m1.609s
real 0m1.610s
real 0m1.608s
real 0m1.607s
real 0m1.610s
real 0m1.609s
real 0m1.611s
real 0m1.608s
real 0m1.611s
where I'ld just take the averages and say 1.632 vs 1.610, which is just
over 1% peformance improvement.
So it's not in the noise, but it's not as big as I initially thought and
measured.
(That said, it obviously depends on how deep the working directory path is
too, and whether it is behind NFS or something else that might need to
cause more work to look up).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Due to a misplaced list block separator, general hints about the config
file options got indented at the same level as the description of the last
option, making it easy to miss them.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the arguments to test_must_fail() begin with a variable assignment,
test_must_fail() attempts to execute the variable assignment as a command.
This fails, and so test_must_fail returns with a successful status value
without running the command it was intended to test.
For example, the following script:
#!/bin/sh
test_must_fail () {
"$@"
test $? -gt 0 -a $? -le 129
}
foo='wo adrian'
test_must_fail foo='yo adrian' sh -c 'echo foo: $foo'
always exits zero and prints the message:
test.sh: line 3: foo=yo adrian: command not found
Test 16 calls test_must_fail in such a way and therefore has not been
testing whether git 'do[es] not fire editor in the presence of conflicts'.
A workaround is to set and export the variable in a normal way, not
using one-shot notation. Because this would affect the remainder of
the process, the test is done inside a subshell.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we include a few uninteresting lines before the interesting ones as
context, we are only interested in seeing the surviving lines themselves
and not the deleted lines that are before them. Mark the added leading
context lines in give_context() and not show deleted lines form them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
match_explicit is called for each push refspec to try to
fully resolve the source and destination sides of the
refspec. Currently, we look at each refspec and report
errors on both the source and the dest side before aborting.
It makes sense to report errors for each refspec, since an
error in one is independent of an error in the other.
However, reporting errors on the 'dst' side of a refspec if
there has been an error on the 'src' side does not
necessarily make sense, since the interpretation of the
'dst' side depends on the 'src' side (for example, when
creating a new unqualified remote ref, we use the same type
as the src ref).
This patch lets match_explicit return early when the src
side of the refspec is bogus. We still look at all of the
refspecs before aborting the push, though.
At the same time, we clean up the call signature, which
previously took an extra "errs" flag. This was pointless, as
we didn't act on that flag, but rather just passed it back
to the caller. Instead, we now use the more traditional
"return -1" to signal an error, and the caller aggregates
the error count.
This change fixes two bugs, as well:
- the early return avoids a segfault when passing a NULL
matched_src to guess_ref()
- the check for multiple sources pointing to a single dest
aborted if the "err" flag was set. Presumably the intent
was not to bother with the check if we had no
matched_src. However, since the err flag was passed in
from the caller, we might abort the check just because a
previous refspec had a problem, which doesn't make
sense.
In practice, this didn't matter, since due to the error
flag we end up aborting the push anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit af66366a9feb0194ed04b1f538998021ece268a8 introduced the keyword
"never" to be used with approxidate() but defined it with a fixed date
without taking care of timezone. As a result approxidate() will return
a timestamp in the future with a negative timezone.
With this patch, approxidate("never") always return 0 whatever your
timezone is.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
head -<n> was deprecated by POSIX, and as modern versions of coreutils
package don't support it at least one exports _POSIX2_VERSION=199209
it's fails on some systems.
head -n<n> is portable, but sed <n>q is even more.
Signed-off-by: Alejandro Mery <amery@geeks.cl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The data read from MERGE_RR file is kept in path-list by hanging textual
40-byte conflict signature to path of the blob that contains the
conflict. The signature is strdup'ed twice, and the second copy is given
to the path-list, leaking the first copy.
Signed-off-by: Junio C Hamano <junio@pobox.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
|
|
The parse_ref method became unused in cd1464083c, but the author
decided to leave it in. Now it gets in the way of refactoring, so
let's remove it.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This eliminates the function git_cmd_str, which was used for composing
command lines, and adds a quote_command function, which quotes all of
its arguments (as in quote.c).
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was implemented as a thin wrapper around an otherwise unused
helper function parse_pack_index_file(). The code becomes simpler
and easier to read by consolidating the two.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a shared repository, we should make sure adjust_shared_perm() is called
after creating the initial fan-out directories under objects/ directory.
Earlier an logico called the function only when mkdir() failed; we should
do so when mkdir() succeeded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before even calling this, all callers have done a "has_sha1_file(sha1)"
or "has_loose_object(sha1)" check, so there is no point in doing a
second check.
If something races with us on object creation, we handle that in the
final link() that moves it to the right place.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When initializing the struct async and struct child_process structures,
the documentation suggested "clearing" the structure with '0' instead of
'\0'. It is enough to use integer zero here.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
diff.c: fix emit_line() again not to add extra line
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
diff: reset color before printing newline
|
|
It worked that way since commit 50f575fc (Tweak diff colors,
2006-06-22), but commit c1795bb0 (Unify whitespace checking, 2007-12-13)
changed it. This patch restores the old behaviour.
Besides Linus' arguments in the log message of 50f575fc, resetting color
before printing newline is also important to keep 'git add --patch'
happy. If the last line(s) of a file are removed, then that hunk will
end with a colored line. However, if the newline comes before the color
reset, then the diff output will have an additional line at the end
containing only the reset sequence. This causes trouble in
git-add--interactive.perl's parse_diff function, because @colored will
have one more element than @diff, and that last element will contain the
color reset. The elements of these arrays will then be copied to @hunk,
but only as many as the number of elements in @diff. As a result the
last color reset is lost and all subsequent terminal output will be
printed in color.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Thomas Rast
Jeff King
Eric Wong
Avery Pennarun
Björn Steinbrink
Joey Hess
Jochen Voss
Dmitry Potapov
Jan Krüger
Patrick Higgins
Stephan Beyer
Michele Ballabio
Linus Torvalds
Brandon Casey
Dan McGee
Olivier Marin
Alejandro Mery
Junio C Hamano
Lea Wiemann
Miklos Vajna
SZEDER Gábor