| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git pull --rebase" ignored the rebase.autostash configuration
variable when the remote history is a descendant of our history,
which has been corrected.
* pb/pull-rebase-autostash-fix:
pull --rebase: honor rebase.autostash when fast-forwarding
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
|
|
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
|
|
The tree is not open for new development yet, but let's mark the
beginning of the new cycle before we start merging down regression
fix topics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commits bc3ae46b42 ("rebase: do not attempt to remove
startup_info->original_cwd", 2021-12-09) and 0fce211ccc ("stash: do not
attempt to remove startup_info->original_cwd", 2021-12-09), we wanted to
allow the subprocess to know which directory the parent process was
running from, so that the subprocess could protect it. However...
When run from a non-main worktree, setup_git_directory() will note
that the discovered git directory
(/PATH/TO/.git/worktree/non-main-worktree) does not match
DEFAULT_GIT_DIR_ENVIRONMENT (see setup_discovered_git_dir()), and
decide to set GIT_DIR in the environment. This matters because...
Whenever git is run with the GIT_DIR environment variable set, and
GIT_WORK_TREE not set, it presumes that '.' is the working tree. So...
This combination results in the subcommand being very confused about
the working tree. Fix it by also setting the GIT_WORK_TREE environment
variable along with setting cmd.dir.
A possibly more involved fix we could consider for later would be to
make setup.c set GIT_WORK_TREE whenever (a) it discovers both the git
directory and the working tree and (b) it decides to set GIT_DIR in the
environment. I did not attempt that here as such would be too big of a
change for a 2.35.1 release.
Test-case-by: Glen Choo <chooglen@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We added an unrelated sanity checking that leads to a BUG() while
plugging a leak, which triggered in a repository with symrefs in
the local branch namespace that point at a ref outside. Partially
revert the change to avoid triggering the BUG().
* ab/checkout-branch-info-leakfix:
checkout: avoid BUG() when hitting a broken repository
|
|
l10n-2.35.0-rnd2
* tag 'l10n-2.35.0-rnd2' of git://github.com/git-l10n/git-po:
l10n: Update Catalan translation
l10n: zh_TW: v2.35.0 round 2 (0 untranslated)
l10n: Update Catalan translation
l10n: de.po: Update German translation
l10n: de.po: Fix translation for "'%s' is aliased to '%s'"
l10n: po-id for 2.35 (round 2)
l10n: Update Catalan translation
l10n: vi(5195t): Update for v2.35.0 round 2
l10n: batch update to fix typo in branch.c
l10n: git.pot: v2.35.0 round 2 (1 new, 1 removed)
l10n: bg.po: Updated Bulgarian translation (5195t)
l10n: zh_CN: v2.35.0 round 1
l10n: fr: v2.35.0 round 1
l10n: zh_TW: v2.35.0 round 1 (1 fuzzy)
l10n: po-id for 2.35 (round 1)
l10n: sv.po: Update Swedish translation (5196t0f0u)
l10n: sv.po: Fix typo
l10n: tr: v2.35.0 round 1
l10n: git.pot: v2.35.0 round 1 (126 new, 142 removed)
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
* 'l10n/zh_TW/220113' of github.com:l10n-tw/git-po:
l10n: zh_TW: v2.35.0 round 2 (0 untranslated)
l10n: zh_TW: v2.35.0 round 1 (1 fuzzy)
|
|
When 9081a421 (checkout: fix "branch info" memory leaks, 2021-11-16)
cleaned up existing memory leaks, we added an unrelated sanity check
to ensure that a local branch is truly local and not a symref to
elsewhere that dies with BUG() otherwise. This was misguided in two
ways. First of all, such a tightening did not belong to a leak-fix
patch. And the condition it detected was *not* a bug in our program
but a problem in user data, where warning() or die() would have been
more appropriate.
As the condition is not fatal (the result of computing the local
branch name in the code that is involved in the faulty check is only
used as a textual label for the commit), let's revert the code to
the original state, i.e. strip "refs/heads/" to compute the local
branch name if possible, and otherwise leave it NULL. The consumer
of the information in merge_working_tree() is prepared to see NULL
in there and act accordingly.
cf. https://bugzilla.redhat.com/show_bug.cgi?id=2042920
Reported-by: Petr Šplíchal <psplicha@redhat.com>
Reported-by: Todd Zullinger <tmz@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Used 1 translation from zh_CN. Thanks to zh_CN translation team!
Signed-off-by: Yi-Jyun Pan <pan93412@gmail.com>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
source: <3de40324bea6a1dd9bca2654721471e3809e87d8.1642538935.git.steadmon@google.com>
source: <c3c26192-aee9-185a-e559-b8735139e49c@web.de>
* js/branch-track-inherit:
branch,checkout: fix --track documentation
|
|
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
The German translation for "'%s' is aliased to '%s'" is incorrect. It
switches the order of alias name and alias definition.
A better translation would be "'%s' ist ein Alias für '%s'". (Full stop
removed intentionally, because the original does not use one either.)
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
* 'po-id' of github.com:bagasme/git-po:
l10n: po-id for 2.35 (round 2)
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent upstream topic introduced checks for certain Git commands that
prevent them from deleting the current working directory, introducing
also a regression test that ensures that commands such as `git version`
_can_ run without a current working directory.
While technically not possible on Windows via the regular Win32 API, we
do run the regression tests in an MSYS2 Bash which uses a POSIX
emulation layer (the MSYS2/Cygwin runtime) where a really evil hack
_does_ allow to delete a directory even if it is the current working
directory.
Therefore, Git needs to be prepared for a missing working directory,
even on Windows.
This issue was not noticed in upstream Git because there was no caller
that tried to discover a Git directory with a deleted current working
directory in the test suite. But in the microsoft/git fork, we do want
to run `pre-command`/`post-command` hooks for every command, even for
`git version`, which means that we make precisely such a call. The bug
is not in that `pre-command`/`post-command` feature, though, but in
`mingw_getcwd()` and needs to be addressed there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Translate following new components:
* advice.c
* alias.c
* sequencer.c
* sparse-index.c
* builtin/sparse-checkout.c
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
* js/branch-track-inherit:
branch,checkout: fix --track usage strings
|
|
FreeBSD 13.0 headers have unconditional dependency on C11 language
features, and adding -std=gnu99 to DEVELOPER_CFLAGS would just
break the developer build.
* jc/freebsd-without-c99-only-build:
Makefile: FreeBSD cannot do C99-or-below build
|
|
As Ævar pointed out in [1], the use of PARSE_OPT_LITERAL_ARGHELP with a
list of allowed parameters is not recommended. Both git-branch and
git-checkout were changed in d311566 (branch: add flags and config to
inherit tracking, 2021-12-20) to use this discouraged combination for
their --track flags.
Fix this by removing PARSE_OPT_LITERAL_ARGHELP, and changing the arghelp
to simply be "mode". Users may discover allowed values in the manual
pages.
[1]: https://lore.kernel.org/git/220111.86a6g3yqf9.gmgdl@evledraar.gmail.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "make DEVELOPER=YesPlease" builds, we try to help developers to
catch as many potential issues as they can by using -Wall and
turning compilation warnings into errors. In the same spirit, we
recently started adding -std=gnu99 to their CFLAGS, so that they can
notice when they accidentally used language features beyond C99.
It however turns out that FreeBSD 13.0 mistakenly uses C11 extension
in its system header files regardless of what __STDC_VERSION__ says,
which means that the platform (unless we tweak their system headers)
cannot be used for this purpose.
It seems that -std=gnu99 is only added conditionally even in today's
config.mak.dev, so it is fine if we dropped -std=gnu99 from there.
Which means that developers on FreeBSD cannot participate in vetting
use of features beyond C99, but there are developers on other
platforms who will, so it's not too bad.
We might want a more "fundamental" fix to make the platform capable
of taking -std=gnu99, like working around the use of unconditional
C11 extension in its system header files by supplying a set of
"replacement" definitions in our header files. We chose not to
pursue such an approach for two reasons at this point:
(1) The fix belongs to the FreeBSD project, not this project, and
such an upstream fix may happen hopefully in a not-too-distant
future.
(2) Fixing such a bug in system header files and working it around
can lead to unexpected breakages (other parts of their system
header files may not be expecting to see and do not work well
with our "replacement" definitions). This close to the final
release of this cycle, we have no time for that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust build on RHEL 7 to explicitly ask C99 support and use
the fallback implementation of uncompress2 we ship.
* da/rhel7-lacks-uncompress2-and-c99:
build: centos/RHEL 7 ships with an older gcc and zlib
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
In git 2.35 l10n round 1, a space between two words was missing in the
message from "branch.c", and it was fixed by commit 68d924e1de (branch:
missing space fix at line 313, 2022-01-11).
Do a batch update for teams (bg, fr, id, sv, tr and zh_CN) that have
already completed their works on l10n round 1.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Generate po/git.pot from v2.35.0-rc1 for git v2.35.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Git 2.35-rc1
* tag 'v2.35.0-rc1':
Git 2.35-rc1
reftable tests: avoid "int" overflow, use "uint64_t"
reftable: avoid initializing structs from structs
t1450-fsck: exec-bit is not needed to make loose object writable
refs API: use "failure_errno", not "errno"
Last minute fixes before -rc1
build: NonStop ships with an older zlib
packfile: fix off-by-one error in decoding logic
t/gpg: simplify test for unknown key
branch: missing space fix at line 313
fmt-merge-msg: prevent use-after-free with signed tags
cache.h: drop duplicate `ensure_full_index()` declaration
lazyload: use correct calling conventions
fetch: fix deadlock when cleaning up lockfiles in async signals
|
|
GCC 4.8.5 is the default system compiler on centos7/RHEL7.
This version requires -std=c99 to enable c99 support.
zlib 1.2.7 on centos7/rhel7 lacks uncompress2().
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* js/t1450-making-it-writable-does-not-need-full-posixperm:
t1450-fsck: exec-bit is not needed to make loose object writable
|
|
A few portability tweaks.
* ab/reftable-build-fixes:
reftable tests: avoid "int" overflow, use "uint64_t"
reftable: avoid initializing structs from structs
|
|
A brown-paper-bag fix on top of a topic that was merged during this
cycle.
* ab/refs-errno-cleanup:
refs API: use "failure_errno", not "errno"
|
|
"pull --rebase" internally uses the merge machinery when the other
history is a descendant of ours (i.e. perform fast-forward). This
came from [1], where the discussion was started from a feature
request to do so. It is a bit hard to read the rationale behind it
in the discussion, but it seems that it was an established fact for
everybody involved that does not even need to be mentioned that
fast-forwarding done with "rebase" was much undesirable than done
with "merge", and more importantly, the result left by "merge" is as
good as (or better than) that by "rebase".
Except for one thing. Because "git merge" does not (and should not)
honor rebase.autostash, "git pull" needs to read it and forward it
when we use "git merge" as a (hopefully better) substitute for "git
rebase" during the fast-forwarding. But we forgot to do so (we only
add "--[no-]autostash" to the "git merge" command when "git pull" itself
was invoked with "--[no-]autostash" command line option.
Make sure "git merge" is run with "--autostash" when
rebase.autostash is set and used to fast-forward the history on
behalf of "git rebase". Incidentally this change also takes care of
the case where
- "git pull --rebase" (without other command line options) is run
- "rebase.autostash" is not set
- The history fast-forwards
In such a case, "git merge" is run with an explicit "--no-autostash"
to prevent it from honoring merge.autostash configuration, which is
what we want. After all, we want the "git merge" to pretend as if
it is "git rebase" while being used for this purpose.
[1] https://lore.kernel.org/git/xmqqa8cfbkeq.fsf_-_@gitster.mtv.corp.google.com/
Reported-by: Tilman Vogel <tilman.vogel@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code added in 1ae2b8cda84 (reftable: add merged table view,
2021-10-07) to consistently use the "uint64_t" type. These "min" and
"max" variables get passed in the body of this function to a function
whose prototype is:
[...] reftable_writer_set_limits([...], uint64_t min, uint64_t max
This avoids the following warning on SunCC 12.5 on
gcc211.fsffrance.org:
"reftable/merged_test.c", line 27: warning: initializer does not fit or is out of range: 0xffffffff
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apparently, the IBM xlc compiler doesn't like this.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A test case wants to append stuff to a loose object file to ensure
that this kind of corruption is detected. To make a read-only loose
object file writable with chmod, it is not necessary to also make
it executable. Replace the bitmask 755 with the instruction +w to
request only the write bit and to also heed the umask. And get rid
of a POSIXPERM prerequisite, which is unnecessary for the test.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a logic error in refs_resolve_ref_unsafe() introduced in a recent
series of mine to abstract the refs API away from errno. See
96f6623ada0 (Merge branch 'ab/refs-errno-cleanup', 2021-11-29)for that
series.
In that series introduction of "failure_errno" to
refs_resolve_ref_unsafe came in ef18119dec8 (refs API: add a version
of refs_resolve_ref_unsafe() with "errno", 2021-10-16). There we'd set
"errno = 0" immediately before refs_read_raw_ref(), and then set
"failure_errno" to "errno" if errno was non-zero afterwards.
Then in the next commit 8b72fea7e91 (refs API: make
refs_read_raw_ref() not set errno, 2021-10-16) we started expecting
"refs_read_raw_ref()" to set "failure_errno". It would do that if
refs_read_raw_ref() failed, but it wouldn't be the same errno.
So we might set the "errno" here to any arbitrary bad value, and end
up e.g. returning NULL when we meant to return the refname from
refs_resolve_ref_unsafe(), or the other way around. Instrumenting this
code will reveal cases where refs_read_raw_ref() will fail, and
"errno" and "failure_errno" will be set to different values.
In practice I haven't found a case where this scary bug changed
anything in practice. The reason for that is that we'll not care about
the actual value of "errno" here per-se, but only whether:
1. We have an errno
2. If it's one of ENOENT, EISDIR or ENOTDIR. See the adjacent code
added in a1c1d8170db (refs_resolve_ref_unsafe: handle d/f
conflicts for writes, 2017-10-06)
I.e. if we clobber "failure_errno" with "errno", but it happened to be
one of those three, and we'll clobber it with another one of the three
we were OK.
Perhaps there are cases where the difference ended up mattering, but I
haven't found them. Instrumenting the test suite to fail if "errno"
and "failure_errno" are different shows a lot of failures, checking if
they're different *and* one is but not the other is outside that list
of three "errno" values yields no failures.
But let's fix the obvious bug. We should just stop paying attention to
"errno" in refs_resolve_ref_unsafe(). In addition let's change the
partial resetting of "errno" in files_read_raw_ref() to happen just
before the "return", to ensure that any such bug will be more easily
spotted in the future.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- Translate new messages
- Translate the word 'cone' instead of leaving it verbatim
(in the context of sparse checkout)
- Make translations of 'failed to' consistent
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Reviewed-by: Teng Long <dyroneteng@gmail.com>
Reviewed-by: 依云 <lilydjwg@gmail.com>
Reviewed-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'fr_2.35.0_rnd1' of github.com:jnavila/git:
l10n: fr: v2.35.0 round 1
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some lockfile code called free() in signal-death code path, which
has been corrected.
* ps/lockfile-cleanup-fix:
fetch: fix deadlock when cleaning up lockfiles in async signals
|
|
Code clean-up.
* ma/header-dup-cleanup:
cache.h: drop duplicate `ensure_full_index()` declaration
|
Junio C Hamano
Elijah Newren
Jordi Mas
Jiang Xin
Yi-Jyun Pan
René Scharfe
Matthias Rüster
Jürgen Krämer
Johannes Schindelin
Bagas Sanjaya
Josh Steadmon
Tran Ngoc Quan
David Aguilar
Alexander Shopov
Philippe Blain
Ævar Arnfjörð Bjarmason
Han-Wen Nienhuys
Johannes Sixt
Fangyi Zhou