| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now the behaviour of '-a' has been straightened out, document it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The original semantics of pretending as if all files were
specified where '-a' appeared and using only the flags given so
far was too confusing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The documentation for git-whatchanged is meant to describe only
the most frequently used options from git-diff-tree. Because "why
doesn't it show merges" was asked more than once, we'd better
describe '-m' option there.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Lacking reliable symlinks, the instructions in the tutorial did not work
in a cygwin setup. Also, a few outputs were not correct.
This patch fixes these, and adds a test case which follows the
instructions of the tutorial (except git-clone, -fetch and -push, which I
have not done yet).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Example in a comment used a wrong environment variable.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Detecting if the user passed --no-cvs-direct and don't force the mode.
It allows us to support all the protocol that the standard cvs client
supports at the snail speed you should expect.
This only affects the rlog reading stage.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
|
|
Since cygwin does not install cpio by default, t5400 results in a very
cryptic failure. So, test for cpio explicitely.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes it handle spaces in paths.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Not all sed understands '\t' and consequently cuts off every
file name at the first "t" (or backslash...).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Noticed by Randal L. Schwartz.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Noticed by Junichi Uekawa.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Two else equal patches should not result in different checksums, only
because they were applied to different versions of the file.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It currently exits printing "git-cat-file SHA1: bad file", while
instead we must just abort the verification for light-weight
tags (e.g. referring to commit objects).
[jc: tag objects can tag anything not just commits, so I fixed
up the original patch slightly. you should be able to validate
a signed tag that points at a blob object. ]
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The dependency rule in templates directory forced 'make install'
that immediately followed 'make all' to rebuild boilerplates.
This was problematic for a workflow that built first as yourself
and then installed as root, from a working tree that is on an
NFS mounted filesystem that is unwritable by root.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Borrow from NO_MMAP patch by Johannes, squelch compiler warnings by
declaring gitstrcasestr() when we use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-status truncates filenames up to the first occurrence of a whitespace
character when displaying. More precisely, it displays the filename up to any
field seperator defined in $IFS.
This patch fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch fixes a bug in git-ls-tree in which the wrong filenames are
listed if the exact same file and directory contents are present in
another location in the tree.
Added a new series of test cases for directory and filename handling.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates last place where checkout-cache gets mentioned wrongly
for checkout-index.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
... but using a {caret} attribute.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This was the last instance of symlink() in coreish part.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Typos, light editing and clarifications.
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Cloning from a repository with more than 256 refs (heads and tags
included) will choke, because upload-pack has a built-in limit of
feeding not more than MAX_NEEDS (currently 256) heads to underlying
git-rev-list. This is a problem when cloning a repository with many
tags, like http://www.linux-mips.org/pub/scm/linux.git, which has 290+
tags.
This commit introduces a new flag, --all, to git-rev-list, to include
all refs in the repository. Updated upload-pack detects requests that
ask more than MAX_NEEDS refs, and sends everything back instead.
We may probably want to tweak the definitions of MAX_NEEDS and
MAX_HAS, but that is a separate topic.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Use the correct buffer when validating 'ref: refs/...'
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
files atexit
Set up atexit only if the .lock-file was opened successfully.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When we updated the marker for new files from 'N' to 'A', we forgot to
notice that the letter is already taken by the All-Or-None mark.
Change the All-Or-None marker to '*' to resolve this conflict.
git-diff-tree -r --diff-filter='R*' -M
shows all the changes (not just renames) that are contained in commits
that have renames, in comparison with:
git-diff-tree -r --diff-filter='R' -M
shows the same set of changes but the diff output are limited only to
renaming changes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There was a leftover use of sed that attempted to remove the commit ID
output from git-diff-tree, which turned into an expensive no-op when
git-diff-tree output header format changed about three months ago.
Drop it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This completes fetches if there are more than 100 outstanding requests
and there are more to prefetch.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The earlier fix incorrectly dropped the code the original had to
ensure the found SHA1 is at least unique within the same pack.
Restore the check.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Unlike cases where "no such object exists", the case where specified
prefix is ambiguous would confuse the user if we say "no such commit"
or such. Give an extra error message from the uniqueness check if
there are more than one objects that match the given prefix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Let the merge strategies handle the base less case if they are able to
do it. It also fixes git-resolve.sh to die if no common ancestors
exists, instead of doing the wrong thing. Furthermore, it contains a
small independent fix for git-merge.sh and a fix for a base less code
path in gitMergeCommon.py.
With this it's possible to use
git merge -s recursive 'merge message' A B
to do a base less merge of A and B.
[jc: Thanks Fredrik for fixing the brown-paper-bag in git-merge.
I fixed a small typo in git-merge-resolve fix; 'test' equality
check is spelled with single equal sign -- C-style double equal
sign is bashism.]
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The original code did not even check alternates, and was confused if
an unpacked object was uniquely found when there was another object
that shares the same prefix in the pack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A carefully crafted pathname can be used to disrupt downstream git-pack-objects
that uses 'git-rev-list --objects' output. Prevent this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
GIT already did everything I wanted it to do since mid 0.99.7,
and it has almost everything I want it to have now, except a
couple of minor tweaks and enhancements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The documentation for git-clone is behind the actual command.
I have been getting tired of reading the shell script to see
what the arguments are so here is an update of the actual documentation.
Signed-off-by: Eric Biederman <ebiederman@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Using Linus' --trivial option, this handles really trivial case
inside git-merge itself, without using any strategy modules.
A 'really trivial case' is:
- we are merging one branch into the current branch;
- there is only one merge base between the branches;
- there is no file-level merge required.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds an option --trivial to restrict 3-way 'read-tree -m -u'
to happen only if there is no file-level merging required.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Useful if you have a file whose name starts with a dash.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It will now merge cases where a file was renamed in one branch and
modified in the other branch cleanly. We also detect a couple of
conflict cases now that wasn't detected before.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Initially it was to allow specifying more than one remote to
allow creation of an Octopus, but it is not being used.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Linus Torvalds
Johannes Schindelin
Ralf Baechle
Martin Langhoff
Jonas Fonseca
Kai Ruemmler
Paolo 'Blaisorblade' Giarrusso
robfitz@273k.net
Christian Meder
Santi_Béjar
Alex Riesen
Daniel Barkalow
Fredrik Kuivinen
Eric W. Biederman