| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In order to ensure the merge/interactive backend gets similar coverage
to the am one, add some tests for cases where previously only the am
backend was tested.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have many rebase tests in the testsuite, and often the same test is
repeated multiple times just testing different backends. For those
tests that were specifically trying to test the am backend, add the --am
flag.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A large variety of rebase types are supported by the interactive
machinery, not just the explicitly interactive ones. These all share
the same code and write the same reflog messages, but the "-i" moniker
in those messages doesn't really have much meaning. It also becomes
somewhat distracting once we switch the default from the am-backend to
the interactive one. Just remove the "-i" from these messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the past, we had different prompts for different types of rebases:
REBASE: for am-based rebases
REBASE-m: for merge-based rebases
REBASE-i: for interactive-based rebases
It's not clear why this distinction was necessary or helpful; when the
prompt was added in commit e75201963f67 ("Improve bash prompt to detect
various states like an unfinished merge", 2007-09-30), it simply added
these three different types. Perhaps there was a useful purpose back
then, but there have been some changes:
* The merge backend was deleted after being implemented on top of the
interactive backend, causing the prompt for merge-based rebases to
change from REBASE-m to REBASE-i.
* The interactive backend is used for multiple different types of
non-interactive rebases, so the "-i" part of the prompt doesn't
really mean what it used to.
* Rebase backends have gained more abilities and have a great deal of
overlap, sometimes making it hard to distinguish them.
* Behavioral differences between the backends have also been ironed
out.
* We want to change the default backend from am to interactive, which
means people would get "REBASE-i" by default if we didn't change
the prompt, and only if they specified --am or --whitespace or -C
would they get the "REBASE" prompt.
* In the future, we plan to have "--whitespace", "-C", and even "--am"
run the interactive backend once it can handle everything the
am-backend can.
For all these reasons, make the prompt for any type of rebase just be
"REBASE".
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, this option doesn't do anything except error out if any
options requiring the interactive-backend are also passed. However,
when we make the default backend configurable later in this series, this
flag will provide a way to override the config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the past, we dis-allowed rebases using the interactive backend from
performing a fast-forward to short-circuit the rebase operation. This
made sense for explicitly interactive rebases and some implicitly
interactive rebases, but certainly became overly stringent when the
merge backend was re-implemented via the interactive backend.
Just as the am-based rebase has always had to disable the fast-forward
based on a variety of conditions or flags (e.g. --signoff, --whitespace,
etc.), we need to do the same but now with a few more options. However,
continuing to use REBASE_FORCE for tracking this is problematic because
the interactive backend used it for a different purpose. (When
REBASE_FORCE wasn't set, the interactive backend would not fast-forward
the whole series but would fast-forward individual "pick" commits at the
beginning of the todo list, and then a squash or something would cause
it to start generating new commits.) So, introduce a new
allow_preemptive_ff flag contained within cmd_rebase() and use it to
track whether we are going to allow a pre-emptive fast-forward that
short-circuits the whole rebase.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t3432 had several stress tests for can_fast_forward(), whose intent was
to ensure we were using the optimization of just fast forwarding when
possible. However, these tests verified that fast forwards had happened
based on the output that rebase printed to the terminal. We can instead
test more directly that we actually fast-forwarded by checking the
reflog, which also has the side effect of making the tests applicable
for the merge/interactive backend.
This change does lose the distinction between "noop" and "noop-force",
but as stated in commit c9efc216830f ("t3432: test for --no-ff's
interaction with fast-forward", 2019-08-27) which introduced that
distinction: "These tests aren't supposed to endorse the status quo,
just test for what we're currently doing.".
This change does not actually run these tests with the merge/interactive
backend; instead this is just a preparatory commit. A subsequent commit
which fixes can_fast_forward() to work with that backend will then also
change t3432 to add tests of that backend as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
restrict_revision in the original shell script was an excluded revision
range. It is also treated that way by the am-backend. In the
conversion from shell to C (see commit 6ab54d17be3f ("rebase -i:
implement the logic to initialize $revisions in C", 2018-08-28)), the
interactive-backend accidentally treated it as a positive revision
rather than a negated one.
This was missed as there were no tests in the testsuite that tested an
interactive rebase with fork-point behavior.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GIT_QUIET environment variable was used to signal the non-am
backends that the rebase should perform quietly. The preserve-merges
backend does not make use of the quiet flag anywhere (other than to
write out its state whenever it writes state), and this mechanism was
broken in the conversion from shell to C. Since this environment
variable was specifically designed for scripts and the only backend that
would still use it is no longer a script, just gut this code.
A subsequent commit will fix --quiet for the interactive/merge backend
in a different way.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the merge backend was re-implemented on top of the interactive
backend, the output of rebase --merge changed a little. This change
allowed this test to be simplified, though it wasn't noticed until now.
Simplify the testcase a little.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As established in the previous commit and commit b00bf1c9a8dd
(git-rebase: make --allow-empty-message the default, 2018-06-27), the
behavior for rebase with different backends in various edge or corner
cases is often more happenstance than design. This commit addresses
another such corner case: commits which "become empty".
A careful reader may note that there are two types of commits which would
become empty due to a rebase:
* [clean cherry-pick] Commits which are clean cherry-picks of upstream
commits, as determined by `git log --cherry-mark ...`. Re-applying
these commits would result in an empty set of changes and a
duplicative commit message; i.e. these are commits that have
"already been applied" upstream.
* [become empty] Commits which are not empty to start, are not clean
cherry-picks of upstream commits, but which still become empty after
being rebased. This happens e.g. when a commit has changes which
are a strict subset of the changes in an upstream commit, or when
the changes of a commit can be found spread across or among several
upstream commits.
Clearly, in both cases the changes in the commit in question are found
upstream already, but the commit message may not be in the latter case.
When cherry-mark can determine a commit is already upstream, then
because of how cherry-mark works this means the upstream commit message
was about the *exact* same set of changes. Thus, the commit messages
can be assumed to be fully interchangeable (and are in fact likely to be
completely identical). As such, the clean cherry-pick case represents a
case when there is no information to be gained by keeping the extra
commit around. All rebase types have always dropped these commits, and
no one to my knowledge has ever requested that we do otherwise.
For many of the become empty cases (and likely even most), we will also
be able to drop the commit without loss of information -- but this isn't
quite always the case. Since these commits represent cases that were
not clean cherry-picks, there is no upstream commit message explaining
the same set of changes. Projects with good commit message hygiene will
likely have the explanation from our commit message contained within or
spread among the relevant upstream commits, but not all projects run
that way. As such, the commit message of the commit being rebased may
have reasoning that suggests additional changes that should be made to
adapt to the new base, or it may have information that someone wants to
add as a note to another commit, or perhaps someone even wants to create
an empty commit with the commit message as-is.
Junio commented on the "become-empty" types of commits as follows[1]:
WRT a change that ends up being empty (as opposed to a change that
is empty from the beginning), I'd think that the current behaviour
is desireable one. "am" based rebase is solely to transplant an
existing history and want to stop much less than "interactive" one
whose purpose is to polish a series before making it publishable,
and asking for confirmation ("this has become empty--do you want to
drop it?") is more appropriate from the workflow point of view.
[1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/
I would simply add that his arguments for "am"-based rebases actually
apply to all non-explicitly-interactive rebases. Also, since we are
stating that different cases should have different defaults, it may be
worth providing a flag to allow users to select which behavior they want
for these commits.
Introduce a new command line flag for selecting the desired behavior:
--empty={drop,keep,ask}
with the definitions:
drop: drop commits which become empty
keep: keep commits which become empty
ask: provide the user a chance to interact and pick what to do with
commits which become empty on a case-by-case basis
In line with Junio's suggestion, if the --empty flag is not specified,
pick defaults as follows:
explicitly interactive: ask
otherwise: drop
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Different rebase backends have different treatment for commits which
start empty (i.e. have no changes relative to their parent), and the
--keep-empty option was added at some point to allow adjusting behavior.
The handling of commits which start empty is actually quite similar to
commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default,
2018-06-27), which pointed out that the behavior for various backends is
often more happenstance than design. The specific change made in that
commit is actually quite relevant as well and much of the logic there
directly applies here.
It makes a lot of sense in 'git commit' to error out on the creation of
empty commits, unless an override flag is provided. However, once
someone determines that there is a rare case that merits using the
manual override to create such a commit, it is somewhere between
annoying and harmful to have to take extra steps to keep such
intentional commits around. Granted, empty commits are quite rare,
which is why handling of them doesn't get considered much and folks tend
to defer to existing (accidental) behavior and assume there was a reason
for it, leading them to just add flags (--keep-empty in this case) that
allow them to override the bad defaults. Fix the interactive backend so
that --keep-empty is the default, much like we did with
--allow-empty-message. The am backend should also be fixed to have
--keep-empty semantics for commits that start empty, but that is not
included in this patch other than a testcase documenting the failure.
Note that there was one test in t3421 which appears to have been written
expecting --keep-empty to not be the default as correct behavior. This
test was introduced in commit 00b8be5a4d38 ("add tests for rebasing of
empty commits", 2013-06-06), which was part of a series focusing on
rebase topology and which had an interesting original cover letter at
https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/
which noted
Your input especially appreciated on whether you agree with the
intent of the test cases.
and then went into a long example about how one of the many tests added
had several questions about whether it was correct. As such, I believe
most the tests in that series were about testing rebase topology with as
many different flags as possible and were not trying to state in general
how those flags should behave otherwise.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t3404.3 is a simple test added by commit d078c3910689 ("t3404: todo list
with commented-out commands only aborts", 2018-08-10) which was designed
to test a todo list that only contained commented-out commands. There
were two problems with this test: (1) its title did not reflect the
purpose of the test, and (2) it tested the desired behavior through a
side-effect of other functionality instead of directly testing the
desired behavior discussed in the commit message.
Modify the test to directly test the desired behavior and update the
test title.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b00bf1c9a8dd ("git-rebase: make --allow-empty-message the
default", 2018-06-27) made --allow-empty-message the default and thus
turned --allow-empty-message into a no-op but did not update the
documentation to reflect this. Update the documentation now, and hide
the option from the normal -h output since it is not useful.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n-2.25.0-rnd1
* tag 'l10n-2.25.0-rnd1' of git://github.com/git-l10n/git-po:
l10n: zh_CN: for git v2.25.0 l10n round 1
l10n: Update Catalan translation
l10n: de.po: Update German translation v2.25.0 round 1
l10n: de.po: Reword generation numbers
l10n: bg.po: Updated Bulgarian translation (4800t)
l10n: es: 2.25.0 round #1
l10n: sv.po: Update Swedish translation (4800t0f0u)
l10n: fr.po v2.25.0 rnd 1
l10n: vi(4800t): Updated Vietnamese translation v2.25.0
l10n: zh_TW.po: update translation for v2.25.0 round 1
l10n: it.po: update the Italian translation for Git 2.25.0
l10n: git.pot: v2.25.0 round 1 (119 new, 13 removed)
l10n: Update Catalan translation
l10n: zh_TW: add translation for v2.24.0
|
|
This reverts commit 5d9324e0f4210bb7d52bcb79efe3935703083f72, reversing
changes made to c58ae96fc4bb11916b62a96940bb70bb85ea5992.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
|
|
Translate 119 new messages (4800t0f0u) for git 2.25.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
Further tweak to a "no backslash in indexed paths" for Windows port
we applied earlier.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: safeguard better against backslashes in file names
|
|
Documentation markup fix.
* ma/config-advice-markup-fix:
config/advice.txt: fix description list separator
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
In 224c7d70fa1 (mingw: only test index entries for backslashes, not tree
entries, 2019-12-31), we relaxed the check for backslashes in tree
entries to check only index entries.
However, the code change was incorrect: it was added to
`add_index_entry_with_check()`, not to `add_index_entry()`, so under
certain circumstances it was possible to side-step the protection.
Besides, the description of that commit purported that all index entries
would be checked when in fact they were only checked when being added to
the index (there are code paths that do not do that, constructing
"transient" index entries).
In any case, it was pointed out in one insightful review at
https://github.com/git-for-windows/git/pull/2437#issuecomment-566771835
that it would be a much better idea to teach `verify_path()` to perform
the check for a backslash. This is safer, even if it comes with two
notable drawbacks:
- `verify_path()` cannot say _what_ is wrong with the path, therefore
the user will no longer be told that there was a backslash in the
path, only that the path was invalid.
- The `git apply` command also calls the `verify_path()` function, and
might have been able to handle Windows-style paths (i.e. with
backslashes instead of forward slashes). This will no longer be
possible unless the user (temporarily) sets `core.protectNTFS=false`.
Note that `git add <windows-path>` will _still_ work because
`normalize_path_copy_len()` will convert the backslashes to forward
slashes before hitting the code path that creates an index entry.
The clear advantage is that `verify_path()`'s purpose is to check the
validity of the file name, therefore we naturally tap into all the code
paths that need safeguarding, also implicitly into future code paths.
The benefits of that approach outweigh the downsides, so let's move the
check from `add_index_entry_with_check()` to `verify_path()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Phillip Szelat <phillip.szelat@gmail.com>
|
|
The english term generation is here not used in the sense of "to
generate" but in the sense of "generations of beings".
This corrects the initial translation from cf4c0c25 (l10n: update German
translation, 2018-12-06).
Fixed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
The whole submoduleAlternateErrorStrategyDie item is interpreted as
being part of the supporting content of the preceding item. This is
because we don't give a double-colon "::" for the separator, but just a
single colon, ":". Let's fix that.
There are a few other matches for [^:]:\s*$ in Documentation/config, but
I didn't spot any similar bugs among them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since recent updates to the log graph rendering code, drawing
certain merges started triggering an assert on a condition that
would no longer hold true, which has been corrected.
* ds/graph-assert-fix:
graph: fix lack of color in horizontal lines
graph: drop assert() for merge with two collapsing parents
|
|
Typofix.
* tm/doc-submodule-absorb-fix:
doc: submodule: fix typo for command absorbgitdirs
|
|
Doc update.
* pm/am-in-body-header-doc-update:
am: document that Date: can appear as an in-body header
|
|
Typofix.
* jb/doc-multi-pack-idx-fix:
multi-pack-index: correct configuration in documentation
|
|
Typofix.
* do/gitweb-typofix-in-comments:
gitweb: fix a couple spelling errors in comments
|
|
* https://github.com/prati0100/git-gui:
git-gui: allow opening currently selected file in default app
git-gui: allow closing console window with Escape
git gui: fix branch name encoding error
git-gui: revert untracked files by deleting them
git-gui: update status bar to track operations
git-gui: consolidate naming conventions
|
|
In some cases, horizontal lines in rendered graphs can lose their
coloring. This is due to a use of graph_line_addch() instead of
graph_line_write_column(). Using a ternary operator to pick the
character is nice for compact code, but we actually need a column to
provide the color.
Add a test to t4215-log-skewed-merges.sh to prevent regression.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git log --graph" shows a merge commit that has two collapsing
lines, like:
| | | | *
| |_|_|/|
|/| | |/
| | |/|
| |/| |
| * | |
* | | |
we trigger an assert():
graph.c:1228: graph_output_collapsing_line: Assertion
`graph->mapping[i - 3] == target' failed.
The assert was introduced by eaf158f8 ("graph API: Use horizontal
lines for more compact graphs", 2009-04-21), which is quite old.
This assert is trying to say that when we complete a horizontal
line with a single slash, it is because we have reached our target.
It is actually the _second_ collapsing line that hits this assert.
The reason we are in this code path is because we are collapsing
the first line, and in that case we are hitting our target now
that the horizontal line is complete. However, the second line
cannot be a horizontal line, so it will collapse without horizontal
lines. In this case, it is inappropriate to assert that we have
reached our target, as we need to continue for another column
before reaching the target. Dropping the assert is safe here.
The new behavior in 0f0f389f12 (graph: tidy up display of
left-skewed merges, 2019-10-15) caused the behavior change that
made this assertion failure possible. In addition to making the
assert possible, it also changed how multiple edges collapse.
In a larger example, the current code will output a collapse
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | | | |/| /
| | | |/| |/
| | |/| |/|
| |/| |/| |
| | |/| | |
| | * | | |
However, the intended collapse should allow multiple horizontal lines
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | |_|_|/| /
| |/| | | |/
| | | |_|/|
| | |/| | |
| | * | | |
This behavior is not corrected by this change, but is noted for a later
update.
Helped-by: Jeff King <peff@peff.net>
Reported-by: Bradley Smith <brad@brad-smith.co.uk>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ds/sparse-cone:
Documentation/git-sparse-checkout.txt: fix a typo
sparse-checkout: use extern for global variables
|
|
The code to write split commit-graph file(s) upon fetching computed
bogus value for the parameter used in splitting the resulting
files, which has been corrected.
* ds/commit-graph-set-size-mult:
commit-graph: prefer default size_mult when given zero
|
|
Code cleanup.
* en/merge-recursive-oid-eq-simplify:
merge-recursive: remove unnecessary oid_eq function
|
|
"git sparse-checkout list" subcommand learned to give its output in
a more concise form when the "cone" mode is in effect.
* ds/sparse-list-in-cone-mode:
sparse-checkout: document interactions with submodules
sparse-checkout: list directories in cone mode
|
|
An earlier update to Git for Windows declared that a tree object is
invalid if it has a path component with backslash in it, which was
overly strict, which has been corrected. The only protection the
Windows users need is to prevent such path (or any path that their
filesystem cannot check out) from entering the index.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: only test index entries for backslashes, not tree entries
|
|
Doc update.
* pb/clarify-line-log-doc:
doc: log, gitk: line-log arguments must exist in starting revision
doc: log, gitk: document accepted line-log diff formats
|
|
Code cleanup.
* ew/packfile-syscall-optim:
packfile: replace lseek+read with pread
packfile: remove redundant fcntl F_GETFD/F_SETFD
|
|
The sentence wants to talk about the superproject's possesive, not plural form.
Signed-off-by: Thomas Menzel <dev@tomsit.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christopher Diaz Riveros <christopher.diaz.riv@gmail.com>
|
|
Similar to "From:" and "Subject:" already mentioned in the
documentation, "Date:" can also appear as an in-body header
to override the value in the e-mail headers. Document it.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
Junio C Hamano
Jiang Xin
Jordi Mas
Johannes Schindelin via GitGitGadget
Matthias Rüster
Thomas Braun
Alexander Shopov
Martin Ågren
Derrick Stolee
Thomas Menzel
Christopher Diaz Riveros
Paul Menzel