| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that we're confident our pax extended header calculation is correct,
turn the criticality of the assertion up to the maximum, from warning
right up to BUG. Simplify the test, as the stderr comparison step would
not be reached in case the BUG message is triggered.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of its callers already passes in a size_t value. Use it
consistently in this function.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A pax extended header record starts with a decimal number. Its value
is the length of the whole record, including its own length.
The calculation of that number in strbuf_append_ext_header() is off by
one in case the length of the rest is close to a higher order of
magnitude. This affects paths and link targets a bit shorter than 1000,
10000, 100000 etc. characters -- paths with a length of up to 100 fit
into the tar header and don't need a pax extended header.
The mistake has been present since the function was added by ae64bbc18c
("tar-tree: Introduce write_entry()", 2006-03-25).
Account for digits added to len during the loop and keep incrementing
until we have enough space for len and the rest. The crucial change is
to check against the current value of len before each iteration, instead
of against its value before the loop.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extended header entries contain a length value that is a bit tricky to
calculate because it includes its own length (number of decimal digits)
as well. We get it wrong in corner cases. Add a check, report wrong
results as a warning and add a test for exercising it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently the Git for Windows project started the upgrade process to
a MSYS2 runtime version based on Cygwin v3.x.
This has the very notable consequence that `$(uname -r)` no longer
reports a version starting with "2", but a version with "3".
That breaks our build, as df5218b4c30b (config.mak.uname: support MSys2,
2016-01-13) simply did not expect the version reported by `uname -r` to
depend on the underlying Cygwin version: it expected the reported
version to match the "2" in "MSYS2".
So let's invert that test case to test for *anything else* than a
version starting with "1" (for MSys). That should safeguard us for the
future, even if Cygwin ends up releasing versionsl like 314.272.65536.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
L10n for Git 2.21.0 round 2.1
* tag 'l10n-2.21.0-rnd2.1' of git://github.com/git-l10n/git-po:
l10n: Fixes to Catalan translation
l10n: Updated Vietnamese translation for v2.21 rd2
l10n: fr.po remove obsolete entries
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
On NetBSD, the version of msgfmt is still 0.14.4. There's no hope for
an upgrade due to some GPLv3 allergy of NetBSD's. This version chokes
on heavily decorated commented entries in po files. It's safer to get
rid of all these obsolete entries.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fix.
* yn/checkout-doc-fix:
checkout doc: fix an unmatched double-quote pair
|
|
l10n-2.21.0-rnd2
* tag 'l10n-2.21.0-rnd2' of git://github.com/git-l10n/git-po:
l10n: bg.po: Updated Bulgarian translation (4363t)
l10n: update German translation
l10n: zh_CN: Revision for git v2.21.0 l10n
l10n: zh_CN: for git v2.21.0 l10n round 1~2
l10n: bg.po: correct typo
l10n: Update Swedish translation (4363t0f0u)
l10n: de.po: fix grammar in message for tag.c
l10n: de.po: fix a message for index-pack.c
l10n: de.po: consistent translation of 'root commit'
l10n: it: update the Italian translation
l10n: es: 2.21.0 round 2
l10n: el: add Greek l10n team and essential translations
l10n: fr.po v2.21.0 rnd 2
l10n: fr.po Fix some typos from round3
l10n: fr.po Fix some typos
l10n: Fixes to Catalan translation
l10n: git.pot: v2.21.0 round 2 (3 new, 3 removed)
l10n: git.pot: v2.21.0 round 1 (214 new, 38 removed)
l10n: zh_CN: fix typo of submodule init message
l10n: Update Catalan translation
|
|
During the six months of development of the Azure Pipelines support, the
patches went through quite a few iterations of changes, and to test
those iterations, a temporary build definition was used.
In the meantime, Azure Pipelines support made it to `master`, and we now
have a regular Azure Pipeline, installed via the common GitHub App
workflow. This new pipeline has a different name (git.git instead of
test-git.git), and a new ID (11 instead of 2).
Let's adjust the badge in our README to reflect that final shape of the
Azure Pipeline.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Yoichi Nakayama <yoichi.nakayama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Test portability fix.
* ab/bsd-fixes:
commit-graph tests: fix unportable "dd" invocation
tests: fix unportable "\?" and "\+" regex syntax
|
|
* ab/workaround-dash-bug-in-test:
tests: avoid syntax triggering old dash bug
|
|
Change an unportable invocation of "dd" with count=0, that wanted to
truncate the commit-graph file. In POSIX it is unspecified what
happens when count=0 is provided[1]. The NetBSD "dd" behavior
differs from GNU (and seemingly other BSDs), which has left this test
broken since d2b86fbaa1 ("commit-graph: fix buffer read-overflow",
2019-01-15).
Copying from /dev/null would seek/truncate to seek=$zero_pos and
stop immediately after that (without being able to copy anything),
which is the right way to truncate the file.
1. http://pubs.opengroup.org/onlinepubs/9699919799/utilities/dd.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Fix widely supported but non-POSIX basic regex syntax introduced in
[1] and [2]. On GNU, NetBSD and FreeBSD the following works:
$ echo xy >f
$ grep 'xy\?' f; echo $?
xy
0
The same goes for "\+". The "?" and "+" syntax is not in the BRE
syntax, just in ERE, but on some implementations it can be invoked by
prefixing the meta-operator with "\", but not on OpenBSD:
$ uname -a
OpenBSD obsd.my.domain 6.2 GENERIC#132 amd64
$ grep --version
grep version 0.9
$ grep 'xy\?' f; echo $?
1
Let's fix this by moving to ERE syntax instead, where "?" and "+" are
universally supported:
$ grep -E 'xy?' f; echo $?
xy
0
1. 2ed5c8e174 ("describe: setup working tree for --dirty", 2019-02-03)
2. c801170b0c ("t6120: test for describe with a bare repository",
2019-02-03)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Fangyi Zhou <fangyi.zhou@yuriko.moe>
|
|
Translate 214 new messages (4363t0f0u) for git 2.21.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/test-tool-gen-nuls:
tests: teach the test-tool to generate NUL bytes and use it
|
|
* mk/t5562-no-input-to-too-large-an-input-test:
t5562: do not depend on /dev/zero
Revert "t5562: replace /dev/zero with a pipe from generate_zero_bytes"
|
|
* mk/t5562-do-not-reuse-output-files:
t5562: do not reuse output files
|
|
Some expected failures of git-http-backend leaves running its children
(receive-pack or upload-pack) which still hold opened descriptors
to act.err and with some probability they live long enough to write
there their failure messages after next test has already truncated
the files. This causes occasional failures of the test script.
Avoid the issue by using separated output and error file for each test,
apprending the test number to their name.
Reported-by: Carlo Arenas <carenas@gmail.com>
Helped-by: Carlo Arenas <carenas@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cc95bc2025 (t5562: replace /dev/zero with a pipe from
generate_zero_bytes, 2019-02-09), we replaced usage of /dev/zero (which
is not available on NonStop, apparently) by a Perl script snippet to
generate NUL bytes.
Sadly, it does not seem to work on NonStop, as t5562 reportedly hangs.
Worse, this also hangs in the Ubuntu 16.04 agents of the CI builds on
Azure Pipelines: for some reason, the Perl script snippet that is run
via `generate_zero_bytes` in t5562's 'CONTENT_LENGTH overflow ssite_t'
test case tries to write out an infinite amount of NUL bytes unless a
broken pipe is encountered, that snippet never encounters the broken
pipe, and keeps going until the build times out.
Oddly enough, this does not reproduce on the Windows and macOS agents,
nor in a local Ubuntu 18.04.
This developer tried for a day to figure out the exact circumstances
under which this hang happens, to no avail, the details remain a
mystery.
In the end, though, what counts is that this here change incidentally
fixes that hang (maybe also on NonStop?). Even more positively, it gets
rid of yet another unnecessary Perl invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was reported [1] that NonStop platform does not have /dev/zero.
The test uses /dev/zero as a dummy input. Passing case (http-backed
failed because of too big input size) should not be reading anything
from it. If http-backend would erroneously try to read any data
returning EOF probably would be even safer than providing some
meaningless data.
Replace /dev/zero with /dev/null to avoid issues with platforms which do
not have /dev/zero.
[1] https://public-inbox.org/git/20190209185930.5256-4-randall.s.becker@rogers.com/
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Revert cc95bc20 ("t5562: replace /dev/zero with a pipe from
generate_zero_bytes", 2019-02-09), as not feeding anything to the
command is a better way to test it.
|
|
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
|
|
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
|
|
'root commit' is usually translated as 'Root-Commit'. But in one
occasion it‘s translated as 'Basis-Commit' which is the translation
for 'base commit'.
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
|
|
Signed-off-by: Alessandro Menti <alessandro.menti@alessandromenti.it>
|
|
|
|
Signed-off-by: Christopher Diaz Riveros <chrisadr@gentoo.org>
|
|
|
|
Signed-off-by: Jimmy Angelakos <vyruss@hellug.gr>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Signed-off-by: Fabien Villepinte <fabien.villepinte@gmail.com>
|
|
Signed-off-by: Fabien Villepinte <fabien.villepinte@gmail.com>
|
|
Running up to v2.21.0, we fixed two bugs that were made prominent by the
Windows-specific change to retain copies of only the 30 latest getenv()
calls' returned strings, invalidating any copies of previous getenv()
calls' return values.
While this really shines a light onto bugs of the form where we hold
onto getenv()'s return values without copying them, it is also a real
problem for users.
And even if Jeff King's patches merged via 773e408881 (Merge branch
'jk/save-getenv-result', 2019-01-29) provide further work on that front,
we are far from done. Just one example: on Windows, we unset environment
variables when spawning new processes, which potentially invalidates
strings that were previously obtained via getenv(), and therefore we
have to duplicate environment values that are somehow involved in
spawning new processes (e.g. GIT_MAN_VIEWER in show_man_page()).
We do not have a chance to investigate, let address, all of those issues
in time for v2.21.0, so let's at least help Windows users by increasing
the number of getenv() calls' return values that are kept valid. The
number 64 was determined by looking at the average number of getenv()
calls per process in the entire test suite run on Windows (which is
around 40) and then adding a bit for good measure. And it is a power of
two (which would have hit yesterday's theme perfectly).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Introduce 3 update messages for v2.21.0 l10n round 2 from commit
32ceace39f (Fix typos in translatable strings for v2.21.0, 2019-02-11).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
|
|
* ea/rebase-compat-doc-fix:
docs/git-rebase: remove redundant entry in incompatible options list
|
René Scharfe
Johannes Schindelin
Junio C Hamano
Jordi Mas
Tran Ngoc Quan
Jean-Noël Avila
Yoichi Nakayama
Alexander Shopov
Ævar Arnfjörð Bjarmason
Jiang Xin
Ralf Thielow
Fangyi Zhou
Nguyễn Thái Ngọc Duy
Peter Krefting
Max Kirillov
Sebastian Staudt
Alessandro Menti
Christopher Diaz Riveros
Jimmy Angelakos
Fabien Villepinte