| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some fields in struct raw_object_store are lazy initialized by the
thread-unsafe packfile.c:prepare_packed_git(). Although this function is
present in the call stack of git-grep threads, all paths to it are
currently protected by obj_read_lock() (and the main thread usually
indirectly calls it before firing the worker threads, anyway). However,
it's possible that future modifications add new unprotected paths to it,
introducing a race condition. Because errors derived from it wouldn't
happen often, it could be hard to detect. So to prevent future
headaches, let's force eager initialization of packed_git when setting
git-grep up. There'll be a small overhead in the cases where we didn't
really need to prepare packed_git during execution but this shouldn't be
very noticeable.
Also, packed_git may be re-initialized by
packfile.c:reprepare_packed_git(). Again, all paths to it in git-grep
are already protected by obj_read_lock() but it may suffer from the same
problem in the future. So let's also internally protect it with
obj_read_lock() (which is a recursive mutex).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that object reading operations are internally protected, the
submodule initialization functions at builtin/grep.c:grep_submodule()
are very close to being thread-safe. Let's take a look at each call and
remove from the critical section what we can, for better performance:
- submodule_from_path() and is_submodule_active() cannot be called in
parallel yet only because they call repo_read_gitmodules() which
contains, in its call stack, operations that would otherwise be in
race condition with object reading (for example parse_object() and
is_promisor_remote()). However, they only call repo_read_gitmodules()
if it wasn't read before. So let's pre-read it before firing the
threads and allow these two functions to safely be called in
parallel.
- repo_submodule_init() is already thread-safe, so remove it from the
critical section without other necessary changes.
- The repo_read_gitmodules(&subrepo) call at grep_submodule() is safe as
no other thread is performing object reading operations in the subrepo
yet. However, threads might be working in the superproject, and this
function calls add_to_alternates_memory() internally, which is racy
with object readings in the superproject. So it must be kept
protected for now. Let's add a "NEEDSWORK" to it, informing why it
cannot be removed from the critical section yet.
- Finally, add_to_alternates_memory() must be kept protected for the
same reason as the item above.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, submodule-config.c doesn't have an externally accessible
function to read gitmodules only if it wasn't already read. But this
exact behavior is internally implemented by gitmodules_read_check(), to
perform a lazy load. Let's merge this function with
repo_read_gitmodules() adding a 'skip_if_read' which allows both
internal and external callers to access this functionality. This
simplifies a little the code. The added option will also be used in
the following patch.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-grep uses 'grep_read_mutex' to protect its calls to object reading
operations. But these have their own internal lock now, which ensures a
better performance (allowing parallel access to more regions). So, let's
remove the former and, instead, activate the latter with
enable_obj_read_lock().
Sections that are currently protected by 'grep_read_mutex' but are not
internally protected by the object reading lock should be surrounded by
obj_read_lock() and obj_read_unlock(). These guarantee mutual exclusion
with object reading operations, keeping the current behavior and
avoiding race conditions. Namely, these places are:
In grep.c:
- fill_textconv() at fill_textconv_grep().
- userdiff_get_textconv() at grep_source_1().
In builtin/grep.c:
- parse_object_or_die() and the submodule functions at
grep_submodule().
- deref_tag() and gitmodules_config_oid() at grep_objects().
If these functions become thread-safe, in the future, we might remove
the locking and probably get some speedup.
Note that some of the submodule functions will already be thread-safe
(or close to being thread-safe) with the internal object reading lock.
However, as some of them will require additional modifications to be
removed from the critical section, this will be done in its own patch.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow object reading to be performed by multiple threads protecting it
with an internal lock, the obj_read_mutex. The lock usage can be toggled
with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the
functions which can be safely called in parallel are:
read_object_file_extended(), repo_read_object_file(),
read_object_file(), read_object_with_reference(), read_object(),
oid_object_info() and oid_object_info_extended(). It's also possible
to use obj_read_lock() and obj_read_unlock() to protect other sections
that cannot execute in parallel with object reading.
Probably there are many spots in the functions listed above that could
be executed unlocked (and thus, in parallel). But, for now, we are most
interested in allowing parallel access to zlib inflation. This is one of
the sections where object reading spends most of the time in (e.g. up to
one-third of git-grep's execution time in the chromium repo corresponds
to inflation) and it's already thread-safe. So, to take advantage of
that, the obj_read_mutex is released when calling git_inflate() and
re-acquired right after, for every calling spot in
oid_object_info_extended()'s call chain. We may refine this lock to also
exploit other possible parallel spots in the future, but for now,
threaded zlib inflation should already give great speedups for threaded
object reading callers.
Note that add_delta_base_cache() was also modified to skip adding
already present entries to the cache. This wasn't possible before, but
it would be now, with the parallel inflation. Take for example the
following situation, where two threads - A and B - are executing the
code at unpack_entry():
1. Thread A is performing the decompression of a base O (which is not
yet in the cache) at PHASE II. Thread B is simultaneously trying to
unpack O, but just starting at PHASE I.
2. Since O is not yet in the cache, B will go to PHASE II to also
perform the decompression.
3. When they finish decompressing, one of them will get the object
reading mutex and go to PHASE III while the other waits for the
mutex. Let’s say A got the mutex first.
4. Thread A will add O to the cache, go throughout the rest of PHASE III
and return.
5. Thread B gets the mutex, also add O to the cache (if the check wasn't
there) and returns.
Finally, it is also important to highlight that the object reading lock
can only ensure thread-safety in the mentioned functions thanks to two
complementary mechanisms: the use of 'struct raw_object_store's
replace_mutex, which guards sections in the object reading machinery
that would otherwise be thread-unsafe; and the 'struct pack_window's
inuse_cnt, which protects window reading operations (such as the one
performed during the inflation of a packed object), allowing them to
execute without the acquisition of the obj_read_mutex.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
replace-object functions are very close to being thread-safe: the only
current racy section is the lazy initialization at
prepare_replace_object(). The following patches will protect some object
reading operations to be called threaded, but before that, replace
functions must be protected. To do so, add a mutex to struct
raw_object_store and acquire it before lazy initializing the
replace_map. This won't cause any noticeable performance drop as the
mutex will no longer be used after the replace_map is initialized.
Later, when the replace functions are called in parallel, thread
debuggers might point our use of the added replace_map_initialized flag
as a data race. However, as this boolean variable is initialized as
false and it's only updated once, there's no real harm. It's perfectly
fine if the value is updated right after a thread read it in
replace-map.h:lookup_replace_object() (there'll only be a performance
penalty for the affected threads at that moment). We could cease the
debugger warning protecting the variable reading at the said function.
However, this would negatively affect performance for all threads
calling it, at any time, so it's not really worthy since the warning
doesn't represent a real problem. Instead, to make sure we don't get
false positives (at ThreadSanitizer, at least) an entry for the
respective function is added to .tsan-suppressions.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
deref_tag() calls is_promisor_object() and parse_object(), both of which
perform lazy initializations and other thread-unsafe operations. If it
was only called by grep_objects() this wouldn't be a problem as the
latter is only executed by the main thread. However, deref_tag() is also
present in read_object_file()'s call stack. So calling deref_tag() in
grep_objects() without acquiring the grep_read_mutex may incur in a race
condition with object reading operations (such as the ones internally
performed by fill_textconv(), called at fill_textconv_grep()). The same
problem happens with the call to gitmodules_config_oid() which also has
parse_object() in its call stack. Fix that protecting both calls with
the said grep_read_mutex.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There're currently two function calls in builtin/grep.c:grep_submodule()
which might result in race conditions:
- submodule_from_path(): it has config_with_options() in its call stack
which, in turn, may have read_object_file() in its own. Therefore,
calling the first function without acquiring grep_read_mutex may end
up causing a race condition with other object read operations
performed by worker threads (for example, at the fill_textconv()
call in grep.c:fill_textconv_grep()).
- parse_object_or_die(): it falls into the same problem, having
repo_has_object_file(the_repository, ...) in its call stack. Besides
that, parse_object(), which is also called by parse_object_or_die(),
is thread-unsafe and also called by object reading functions.
It's unlikely to really fall into a data race with these operations as
the volume of calls to them is usually very low. But we better protect
ourselves against this possibility, anyway. So, to solve these issues,
move both of these function calls into the critical section of
grep_read_mutex.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-grep uses an internal grep_read_mutex to protect object reading
operations. Similarly, there's a grep_attr_mutex to protect calls to the
gitattributes machinery. However, two of the three functions protected
by the last mutex may also perform object reading, as seen below:
- userdiff_get_textconv() > notes_cache_init() >
notes_cache_match_validity() > lookup_commit_reference_gently() >
parse_object() > repo_has_object_file() >
repo_has_object_file_with_flags() > oid_object_info_extended()
- userdiff_find_by_path() > git_check_attr() > collect_some_attrs() >
prepare_attr_stack() > read_attr() > read_attr_from_index() >
read_blob_data_from_index() > read_object_file()
As these calls are not protected by grep_read_mutex, there might be race
conditions with other threads performing object reading (e.g. threads
calling fill_textconv() at grep.c:fill_textconv_grep()). To prevent
that, let's make sure to acquire the lock before both of these calls.
Note: this patch might slow down the threaded grep in worktree, for the
sake of thread-safeness. However, in the following patches, we should
regain performance by replacing grep_read_mutex for an internal object
reading lock and allowing parallel inflation during object reading.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n-2.25.0-rnd1
* tag 'l10n-2.25.0-rnd1' of git://github.com/git-l10n/git-po:
l10n: zh_CN: for git v2.25.0 l10n round 1
l10n: Update Catalan translation
l10n: de.po: Update German translation v2.25.0 round 1
l10n: de.po: Reword generation numbers
l10n: bg.po: Updated Bulgarian translation (4800t)
l10n: es: 2.25.0 round #1
l10n: sv.po: Update Swedish translation (4800t0f0u)
l10n: fr.po v2.25.0 rnd 1
l10n: vi(4800t): Updated Vietnamese translation v2.25.0
l10n: zh_TW.po: update translation for v2.25.0 round 1
l10n: it.po: update the Italian translation for Git 2.25.0
l10n: git.pot: v2.25.0 round 1 (119 new, 13 removed)
l10n: Update Catalan translation
l10n: zh_TW: add translation for v2.24.0
|
|
This reverts commit 5d9324e0f4210bb7d52bcb79efe3935703083f72, reversing
changes made to c58ae96fc4bb11916b62a96940bb70bb85ea5992.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
|
|
Translate 119 new messages (4800t0f0u) for git 2.25.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
Further tweak to a "no backslash in indexed paths" for Windows port
we applied earlier.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: safeguard better against backslashes in file names
|
|
Documentation markup fix.
* ma/config-advice-markup-fix:
config/advice.txt: fix description list separator
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
In 224c7d70fa1 (mingw: only test index entries for backslashes, not tree
entries, 2019-12-31), we relaxed the check for backslashes in tree
entries to check only index entries.
However, the code change was incorrect: it was added to
`add_index_entry_with_check()`, not to `add_index_entry()`, so under
certain circumstances it was possible to side-step the protection.
Besides, the description of that commit purported that all index entries
would be checked when in fact they were only checked when being added to
the index (there are code paths that do not do that, constructing
"transient" index entries).
In any case, it was pointed out in one insightful review at
https://github.com/git-for-windows/git/pull/2437#issuecomment-566771835
that it would be a much better idea to teach `verify_path()` to perform
the check for a backslash. This is safer, even if it comes with two
notable drawbacks:
- `verify_path()` cannot say _what_ is wrong with the path, therefore
the user will no longer be told that there was a backslash in the
path, only that the path was invalid.
- The `git apply` command also calls the `verify_path()` function, and
might have been able to handle Windows-style paths (i.e. with
backslashes instead of forward slashes). This will no longer be
possible unless the user (temporarily) sets `core.protectNTFS=false`.
Note that `git add <windows-path>` will _still_ work because
`normalize_path_copy_len()` will convert the backslashes to forward
slashes before hitting the code path that creates an index entry.
The clear advantage is that `verify_path()`'s purpose is to check the
validity of the file name, therefore we naturally tap into all the code
paths that need safeguarding, also implicitly into future code paths.
The benefits of that approach outweigh the downsides, so let's move the
check from `add_index_entry_with_check()` to `verify_path()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Phillip Szelat <phillip.szelat@gmail.com>
|
|
The english term generation is here not used in the sense of "to
generate" but in the sense of "generations of beings".
This corrects the initial translation from cf4c0c25 (l10n: update German
translation, 2018-12-06).
Fixed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
The whole submoduleAlternateErrorStrategyDie item is interpreted as
being part of the supporting content of the preceding item. This is
because we don't give a double-colon "::" for the separator, but just a
single colon, ":". Let's fix that.
There are a few other matches for [^:]:\s*$ in Documentation/config, but
I didn't spot any similar bugs among them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since recent updates to the log graph rendering code, drawing
certain merges started triggering an assert on a condition that
would no longer hold true, which has been corrected.
* ds/graph-assert-fix:
graph: fix lack of color in horizontal lines
graph: drop assert() for merge with two collapsing parents
|
|
Typofix.
* tm/doc-submodule-absorb-fix:
doc: submodule: fix typo for command absorbgitdirs
|
|
Doc update.
* pm/am-in-body-header-doc-update:
am: document that Date: can appear as an in-body header
|
|
Typofix.
* jb/doc-multi-pack-idx-fix:
multi-pack-index: correct configuration in documentation
|
|
Typofix.
* do/gitweb-typofix-in-comments:
gitweb: fix a couple spelling errors in comments
|
|
* https://github.com/prati0100/git-gui:
git-gui: allow opening currently selected file in default app
git-gui: allow closing console window with Escape
git gui: fix branch name encoding error
git-gui: revert untracked files by deleting them
git-gui: update status bar to track operations
git-gui: consolidate naming conventions
|
|
In some cases, horizontal lines in rendered graphs can lose their
coloring. This is due to a use of graph_line_addch() instead of
graph_line_write_column(). Using a ternary operator to pick the
character is nice for compact code, but we actually need a column to
provide the color.
Add a test to t4215-log-skewed-merges.sh to prevent regression.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git log --graph" shows a merge commit that has two collapsing
lines, like:
| | | | *
| |_|_|/|
|/| | |/
| | |/|
| |/| |
| * | |
* | | |
we trigger an assert():
graph.c:1228: graph_output_collapsing_line: Assertion
`graph->mapping[i - 3] == target' failed.
The assert was introduced by eaf158f8 ("graph API: Use horizontal
lines for more compact graphs", 2009-04-21), which is quite old.
This assert is trying to say that when we complete a horizontal
line with a single slash, it is because we have reached our target.
It is actually the _second_ collapsing line that hits this assert.
The reason we are in this code path is because we are collapsing
the first line, and in that case we are hitting our target now
that the horizontal line is complete. However, the second line
cannot be a horizontal line, so it will collapse without horizontal
lines. In this case, it is inappropriate to assert that we have
reached our target, as we need to continue for another column
before reaching the target. Dropping the assert is safe here.
The new behavior in 0f0f389f12 (graph: tidy up display of
left-skewed merges, 2019-10-15) caused the behavior change that
made this assertion failure possible. In addition to making the
assert possible, it also changed how multiple edges collapse.
In a larger example, the current code will output a collapse
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | | | |/| /
| | | |/| |/
| | |/| |/|
| |/| |/| |
| | |/| | |
| | * | | |
However, the intended collapse should allow multiple horizontal lines
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | |_|_|/| /
| |/| | | |/
| | | |_|/|
| | |/| | |
| | * | | |
This behavior is not corrected by this change, but is noted for a later
update.
Helped-by: Jeff King <peff@peff.net>
Reported-by: Bradley Smith <brad@brad-smith.co.uk>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ds/sparse-cone:
Documentation/git-sparse-checkout.txt: fix a typo
sparse-checkout: use extern for global variables
|
|
The code to write split commit-graph file(s) upon fetching computed
bogus value for the parameter used in splitting the resulting
files, which has been corrected.
* ds/commit-graph-set-size-mult:
commit-graph: prefer default size_mult when given zero
|
|
Code cleanup.
* en/merge-recursive-oid-eq-simplify:
merge-recursive: remove unnecessary oid_eq function
|
|
"git sparse-checkout list" subcommand learned to give its output in
a more concise form when the "cone" mode is in effect.
* ds/sparse-list-in-cone-mode:
sparse-checkout: document interactions with submodules
sparse-checkout: list directories in cone mode
|
|
An earlier update to Git for Windows declared that a tree object is
invalid if it has a path component with backslash in it, which was
overly strict, which has been corrected. The only protection the
Windows users need is to prevent such path (or any path that their
filesystem cannot check out) from entering the index.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: only test index entries for backslashes, not tree entries
|
|
Doc update.
* pb/clarify-line-log-doc:
doc: log, gitk: line-log arguments must exist in starting revision
doc: log, gitk: document accepted line-log diff formats
|
|
Code cleanup.
* ew/packfile-syscall-optim:
packfile: replace lseek+read with pread
packfile: remove redundant fcntl F_GETFD/F_SETFD
|
|
The sentence wants to talk about the superproject's possesive, not plural form.
Signed-off-by: Thomas Menzel <dev@tomsit.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christopher Diaz Riveros <christopher.diaz.riv@gmail.com>
|
|
Similar to "From:" and "Subject:" already mentioned in the
documentation, "Date:" can also appear as an in-body header
to override the value in the e-mail headers. Document it.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Denis Ovsienko <denis@ovsienko.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's core.multiPackIndex, not pack.multiIndex.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This typo was introduced in 94c0956b60 (sparse-checkout: create builtin
with 'list' subcommand, 2019-11-21).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow opening the currently selected file in its default app by clicking
on its name.
* zs/open-current-file:
git-gui: allow opening currently selected file in default app
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
* 'fr_v2.25.0_rnd1' of github.com:jnavila/git:
l10n: fr.po v2.25.0 rnd 1
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
Matheus Tavares
Junio C Hamano
Jiang Xin
Jordi Mas
Johannes Schindelin via GitGitGadget
Matthias Rüster
Thomas Braun
Alexander Shopov
Martin Ågren
Derrick Stolee
Thomas Menzel
Christopher Diaz Riveros
Paul Menzel
Denis Ovsienko
Johannes Berg
Taylor Blau
Pratyush Yadav
Peter Krefting
Jean-Noël Avila
Tran Ngoc Quan