Age | Commit message (Collapse) | Author | Files | Lines |
|
parse_unit_factor() multiplies the number that is passed to it with the
value of a recognized unit factor (K, M or G for 2^10, 2^20 and 2^30,
respectively). All callers pass in 1 as a number, though, which allows
them to check the actual multiplication for overflow before they are
doing it themselves.
Ignore the passed in number and don't multiply, as this feature of
parse_unit_factor() is not used anymore. Rename the output parameter to
reflect that it's not about the end result anymore, but just about the
unit factor.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parse_unit_factor() checks if a K, M or G is present after a number and
multiplies it by 2^10, 2^20 or 2^30, respectively. One of its callers
checks if the result is smaller than the number alone to detect
overflows. The other one passes 1 as the number and does multiplication
and overflow check itself in a similar manner.
This works, but is inconsistent, and it would break if we added support
for a bigger unit factor. E.g. 16777217T is 2^64 + 2^40, i.e. too big
for a 64-bit number. Modulo 2^64 we get 2^40 == 1TB, which is bigger
than the raw number 16777217 == 2^24 + 1, so the overflow would go
undetected by that method.
Let both callers pass 1 and handle overflow check and multiplication
themselves. Do the check before the multiplication, using
unsigned_mult_overflows, which is simpler and can deal with larger unit
factors.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `labs()` function operates, as the initial `l` suggests, on `long`
parameters. However, in `config.c` we tried to use it on values of type
`intmax_t`.
This problem was found by GCC v9.x.
To fix it, let's just "unroll" the function (i.e. negate the value if it
is negative).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We introduced helper macros to simplify loading functions dynamically.
Might just as well use them.
This also side-steps a compiler warning when building with GCC v8.x: it
would complain about casting between incompatible function pointers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The kwset functionality makes use of the obstack code, which expects to
be handed a function that can allocate large chunks of data. It expects
that function to accept a `size` parameter of type `long`.
This upsets GCC 8 on Windows, because `long` does not have the same
bit size as `size_t` there.
Now, the proper thing to do would be to switch to `size_t`. But this
would make us deviate from the "upstream" code even further, making it
hard to synchronize with newer versions, and also it would be quite
involved because that `long` type is so invasive in that code.
Let's punt, and instead provide a super small wrapper around
`xmalloc()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The return type of the `GetProcAddress()` function is `FARPROC` which
evaluates to `long long int (*)()`, i.e. it cannot be cast to the
correct function signature by GCC 8.
To work around that, we first cast to `void *` and go on with our merry
lives.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n-2.22.0-rnd3
* tag 'l10n-2.22.0-rnd3' of git://github.com/git-l10n/git-po: (25 commits)
l10n: fr.po: Review French translation
l10n: de.po: Update German translation
l10n: de.po: improve description of 'git reset --quiet'
l10n: TEAMS: Change German translation team leader
l10n: bg.po: Updated Bulgarian translation (4581t)
l10n: zh_CN: Revision for git v2.22.0 l10n
l10n: zh_CN: for git v2.22.0 l10n round 1~3
l10n: es: 2.22.0 round 3
l10n: it.po: Updated Italian translation
l10n: fr v2.22.0 rnd 3
l10n: vi.po(4581t): Updated Vietnamese translation for v2.22.0 round 3
l10n: git.pot: v2.22.0 round 3 (3 new, 2 removed)
l10n: es: 2.22.0 round 2
l10n: bg.po: Updated Bulgarian translation (4580t)
l10n: vi.po(4580t): Updated Vietnamese translation for v2.22.0 round 2
l10n: fr.po v2.22.0 round 2
l10n: git.pot: v2.22.0 round 2 (6 new, 3 removed)
l10n: bg.po: Updated Bulgarian translation (4577t)
l10n: es: 2.22.0 round 1
l10n: vi.po(4577t): Updated Vietnamese translation for v2.22.0 round 1
...
|
|
* 'fr_review' of git://github.com/jnavila/git:
l10n: fr.po: Review French translation
|
|
* 'master' of git://github.com/alshopov/git-po:
l10n: bg.po: Updated Bulgarian translation (4581t)
|
|
Signed-off-by: Cédric Malard <c.malard-git@valdun.net>
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
|
|
Recent code restructuring of merge-recursive engine introduced a
regression dealing with rename/add conflict.
* en/merge-directory-renames-fix:
merge-recursive: restore accidentally dropped setting of path
|
|
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
Acked-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
In commit 8daec1df03de ("merge-recursive: switch from (oid,mode) pairs
to a diff_filespec", 2019-04-05), we actually switched from
(oid,mode,path) triplets to a diff_filespec -- but most callsites in the
patch only needed to worry about oid and mode so the commit message
focused on that. The oversight in the commit message apparently spilled
over to the code as well; one of the dozen or so callsites accidentally
dropped the setting of the path in the conversion. Restore the path
setting in that location.
Also, this pointed out that our testsuite was lacking a good rename/add
test, at least one that involved the need for merge content with the
rename. Add such a test, and since rename/add vs. add/rename could
possibly be important, redo the merge the opposite direction to make
sure we don't have issues with the direction of the merge. These
testcases failed before restoring the setting of path, but with the
paths appropriately set the testcases both pass.
Reported-by: Ben Humphreys <behumphreys@atlassian.com>
Based-on-patch-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: Ben Humphreys <behumphreys@atlassian.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Revise 51 translations, improving consistency for some phrased.
Update email address for Fangyi Zhou
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Translate 274 new messages (4581t0f0u) for git 2.22.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* '2.22' of https://github.com/ChrisADR/git-po:
l10n: es: 2.22.0 round 3
|
|
* 'it-l10n-wip' of github.com:AlessandroMenti/git-po:
l10n: it.po: Updated Italian translation
|
|
Signed-off-by: Christopher Diaz Riveros <chrisadr@gentoo.org>
|
|
Signed-off-by: Alessandro Menti <alessandro.menti@alessandromenti.it>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Generate po/git.pot from v2.22.0-rc3 for git v2.22.0 l10n round 3.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of git://git.kernel.org/pub/scm/git/git:
Git 2.22-rc3
i18n: fix typos found during l10n for git 2.22.0
RelNotes: minor typo fixes in 2.22.0 draft
list-objects-filter: disable 'sparse:path' filters
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Disable "--filter=sparse:path=<path>" that would allow reading from
paths on the filesystem.
* cc/list-objects-filter-wo-sparse-path:
list-objects-filter: disable 'sparse:path' filters
|
|
Fix two typos introduced by the following commits:
+ 31fba9d3b4 (diff-parseopt: convert --[src|dst]-prefix, 2019-03-24)
+ ed8b4132c8 (remote-curl: mark all error messages for translation,
2019-03-05)
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christopher Diaz Riveros <chrisadr@gentoo.org>
|
|
* 'master' of https://github.com/vnwildman/git:
l10n: vi.po(4580t): Updated Vietnamese translation for v2.22.0 round 2
|
|
* 'master' of git://github.com/alshopov/git-po:
l10n: bg.po: Updated Bulgarian translation (4580t)
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Generate po/git.pot from v2.22.0-rc2 for git v2.22.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of git://git.kernel.org/pub/scm/git/git: (66 commits)
Git 2.22-rc2
...
|
|
* 'master' of https://github.com/Softcatala/git-po:
l10n: Update Catalan translation
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/rebase-config-bitfix:
rebase: replace incorrect logical negation by correct bitwise one
|
|
Doc markup fix.
* es/doc-gitsubmodules-markup:
gitsubmodules: align html and nroff lists
|
|
Typofix.
* ja/diff-opt-typofix:
diff: fix mistake in translatable strings
|
|
A brown-paper-bag bugfix to a change already in 'master'.
* jt/clone-server-option:
fetch-pack: send server options after command
|
|
A brown-paper-bag bugfix to a change already in 'master'.
* sg/progress-off-by-one-fix:
progress: avoid empty line when breaking the progress line
|
|
A bit more leftover clean-up to deprepcate "rebase -p".
* js/rebase-deprecate-preserve-merges:
rebase docs: recommend `-r` over `-p`
docs: say that `--rebase=preserve` is deprecated
tests: mark a couple more test cases as requiring `rebase -p`
|
|
Rename environment variables that are used to control the "trace2"
mechanism to a more readable name.
* sg/trace2-rename:
trace2: document the supported values of GIT_TRACE2* env variables
trace2: rename environment variables to GIT_TRACE2*
|
|
* jh/trace2:
trace2: fix tracing when NO_PTHREADS is defined
|
|
A brown-paper-bag bugfix to a change already in 'master'.
* nd/diff-parseopt:
parse-options: check empty value in OPT_INTEGER and OPT_ABBREV
diff-parseopt: restore -U (no argument) behavior
diff-parseopt: correct variable types that are used by parseopt
|