| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Simplify code maintenance by removing the ability to toggle between
usage of memory pools and direct allocations. This allows us to also
remove paths_to_free since it was solely about bookkeeping to make sure
we freed the necessary paths, and allows us to remove some auxiliary
functions.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
pool_alloc_filespec() was written so that the code when pool != NULL
mimicked the code from alloc_filespec(), which including allocating
enough extra space for the path and then copying it. However, the path
passed to pool_alloc_filespec() is always going to already be in the
same memory pool, so we may as well reuse it instead of copying it.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 198.5 ms ± 3.4 ms 198.3 ms ± 2.9 ms
mega-renames: 679.1 ms ± 5.6 ms 661.8 ms ± 5.9 ms
just-one-mega: 271.9 ms ± 2.8 ms 264.6 ms ± 2.5 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 198.1 ms ± 2.6 ms 198.5 ms ± 3.4 ms
mega-renames: 715.8 ms ± 4.0 ms 679.1 ms ± 5.6 ms
just-one-mega: 276.8 ms ± 4.2 ms 271.9 ms ± 2.8 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We want to be able to allocate filespecs and filepairs using a mem_pool.
However, filespec data will still remain outside the pool (perhaps in
the future we could plumb the pool through the various diff APIs to
allocate the filespec data too, but for now we are limiting the scope).
Add some extra functions to allocate these appropriately based on the
non-NULL-ness of opt->priv->pool, as well as some extra functions to
handle correctly deallocating the relevant parts of them. A future
commit will make use of these new functions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For all the strmaps (including strintmaps and strsets) whose memory is
unconditionally freed as part of clear_or_reinit_internal_opts(), switch
them over to using our new memory pool.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 202.5 ms ± 3.2 ms 198.1 ms ± 2.6 ms
mega-renames: 1.072 s ± 0.012 s 715.8 ms ± 4.0 ms
just-one-mega: 357.3 ms ± 3.9 ms 276.8 ms ± 4.2 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge-ort has a lot of data structures, and they all tend to be freed
together in clear_or_reinit_internal_opts(). Set up a memory pool to
allow us to make these allocations and deallocations faster. Future
commits will adjust various callers to make use of this memory pool.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the code more flexible so that it can handle both being run with or
without a memory pool by adding utility functions which will either call
xmalloc, xcalloc, xstrndup
or
mem_pool_alloc, mem_pool_calloc, mem_pool_strndup
depending on whether we have a non-NULL memory pool. A subsequent
commit will make use of these.
(We will actually be dropping these functions soon and just assuming we
always have a memory pool, but the flexibility was very useful during
development of merge-ort so I want to be able to restore it if needed.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Exact rename detection, via insert_file_table(), uses a hashmap to store
files by oid. Use a mem_pool for the hashmap entries so these can all be
allocated and deallocated together.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 204.2 ms ± 3.0 ms 202.5 ms ± 3.2 ms
mega-renames: 1.076 s ± 0.015 s 1.072 s ± 0.012 s
just-one-mega: 364.1 ms ± 7.0 ms 357.3 ms ± 3.9 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to make it clearer that these three variables holding a
function refer to functions that will clear the strmap/strintmap/strset,
rename them to str{map,intmap,set}_clear_func().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The merge algorithm mostly consists of the following three functions:
collect_merge_info()
detect_and_process_renames()
process_entries()
Prior to the trivial directory resolution optimization of the last half
dozen commits, process_entries() was consistently the slowest, followed
by collect_merge_info(), then detect_and_process_renames(). When the
trivial directory resolution applies, it often dramatically decreases
the amount of time spent in the two slower functions.
Looking at the performance results in the previous commit, the trivial
directory resolution optimization helps amazingly well when there are no
relevant renames. It also helps really well when reapplying a long
series of linear commits (such as in a rebase or cherry-pick), since the
relevant renames may well be cached from the first reapplied commit.
But when there are any relevant renames that are not cached (represented
by the just-one-mega testcase), then the optimization does not help at
all.
Often, I noticed that when the optimization does not apply, it is
because there are a handful of relevant sources -- maybe even only one.
It felt frustrating to need to recurse into potentially hundreds or even
thousands of directories just for a single rename, but it was needed for
correctness.
However, staring at this list of functions and noticing that
process_entries() is the most expensive and knowing I could avoid it if
I had cached renames suggested a simple idea: change
collect_merge_info()
detect_and_process_renames()
process_entries()
into
collect_merge_info()
detect_and_process_renames()
<cache all the renames, and restart>
collect_merge_info()
detect_and_process_renames()
process_entries()
This may seem odd and look like more work. However, note that although
we run collect_merge_info() twice, the second time we get to employ
trivial directory resolves, which makes it much faster, so the increased
time in collect_merge_info() is small. While we run
detect_and_process_renames() again, all renames are cached so it's
nearly a no-op (we don't call into diffcore_rename_extended() but we do
have a little bit of data structure checking and fixing up). And the
big payoff comes from the fact that process_entries(), will be much
faster due to having far fewer entries to process.
This restarting only makes sense if we can save recursing into enough
directories to make it worth our while. Introduce a simple heuristic to
guide this. Note that this heuristic uses a "wanted_factor" that I have
virtually no actual real world data for, just some back-of-the-envelope
quasi-scientific calculations that I included in some comments and then
plucked a simple round number out of thin air. It could be that
tweaking this number to make it either higher or lower improves the
optimization. (There's slightly more here; when I first introduced this
optimization, I used a factor of 10, because I was completely confident
it was big enough to not cause slowdowns in special cases. I was
certain it was higher than needed. Several months later, I added the
rough calculations which make me think the optimal number is close to 2;
but instead of pushing to the limit, I just bumped it to 3 to reduce the
risk that there are special cases where this optimization can result in
slowing down the code a little. If the ratio of path counts is below 3,
we probably will only see minor performance improvements at best
anyway.)
Also, note that while the diffstat looks kind of long (nearly 100
lines), more than half of it is in two comments explaining how things
work.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 205.1 ms ± 3.8 ms 204.2 ms ± 3.0 ms
mega-renames: 1.564 s ± 0.010 s 1.076 s ± 0.015 s
just-one-mega: 479.5 ms ± 3.9 ms 364.1 ms ± 7.0 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This combines the work of the last several patches, and implements the
conditions when we don't need to recurse into directories. It's perhaps
easiest to see the logic by separating the fact that a directory might
have both rename sources and rename destinations:
* rename sources: only files present in the merge base can serve as
rename sources, and only when one side deletes that file. When the
tree on one side matches the merge base, that means every file
within the subtree matches the merge base. This means that the
skip-irrelevant-rename-detection optimization from before kicks in
and we don't need any of these files as rename sources.
* rename destinations: the tree that does not match the merge base
might have newly added and hence unmatched destination files.
This is what usually prevents us from doing trivial directory
resolutions in the merge machinery. However, the fact that we have
deferred recursing into this directory until the end means we know
whether there are any unmatched relevant potential rename sources
elsewhere in this merge. If there are no unmatched such relevant
sources anywhere, then there is no need to look for unmatched
potential rename destinations to match them with.
This informs our algorithm:
* Search through relevant_sources; if we have entries, they better all
be reflected in cached_pairs or cached_irrelevant, otherwise they
represent an unmatched potential rename source (causing the
optimization to be disallowed).
* For any relevant_source represented in cached_pairs, we do need to
to make sure to get the destination for each source, meaning we need
to recurse into any ancestor directories of those destinations.
* Once we've recursed into all the rename destinations for any
relevant_sources in cached_pairs, we can then do the trivial
directory resolution for the remaining directories.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 5.235 s ± 0.042 s 205.1 ms ± 3.8 ms
mega-renames: 9.419 s ± 0.107 s 1.564 s ± 0.010 s
just-one-mega: 480.1 ms ± 3.9 ms 479.5 ms ± 3.9 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When one side of history matches the merge base (including when the
merge base has no entry for the given directory), have
collect_merge_info_callback() defer recursing into the directory. To
ensure those entries are eventually handled, add a call to
handled_deferred_entries() in collect_merge_info() after
traverse_trees() returns.
Note that the condition in collect_merge_info_callback() may look more
complicated than necessary at first glance;
renames->trivial_merges_okay[side] is always true until
handle_deferred_entries() is called, and possible_trivial_merges[side]
is always empty right now (and in the future won't be filled until
handle_deferred_entries() is called). However, when
handle_deferred_entries() calls traverse_trees() for the relevant
deferred directories, those traverse_trees() calls will once again end
up in collect_merge_info_callback() for all the entries under those
subdirectories. The extra conditions are there for such deferred cases
and will be used more as we do more with those variables.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to allow trivial directory resolution, we first need to be able
to gather more information to determine if the optimization is safe. To
enable that, we need a way of deferring the recursion into the directory
until a later time. Naturally, deferring the entry into a subtree means
that we need some function that will later recurse into the subdirectory
exactly the same way that collect_merge_info_callback() would have done.
Add a helper function that does this. For now this function is not used
but a subsequent commit will change that. Future commits will also make
the function sometimes resolve directories instead of traversing inside.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted a few commits ago, we can resolve individual files early if all
three sides of the merge have a file at the path and two of the three
sides match. We would really like to do the same thing with
directories, because being able to do a trivial directory resolve means
we don't have to recurse into the directory, potentially saving us a
huge amount of time in both collect_merge_info() and process_entries().
Unfortunately, resolving directories early would mean missing any
renames whose source or destination is underneath that directory.
If we somehow knew there weren't any renames under the directory in
question, then we could resolve it early. Sadly, it is impossible to
determine whether there are renames under the directory in question
without recursing into it, and this has traditionally kept us from ever
implementing such an optimization.
In commit f89b4f2bee ("merge-ort: skip rename detection entirely if
possible", 2021-03-11), we added an additional reason that rename
detection could be skipped entirely -- namely, if no *relevant* sources
were present. Without completing collect_merge_info_callback(), we do
not yet know if there are no relevant sources. However, we do know that
if the current directory on one side matches the merge base, then every
source file within that directory will not be RELEVANT_CONTENT, and a
few simple checks can often let us rule out RELEVANT_LOCATION as well.
This suggests we can just defer recursing into such directories until
the end of collect_merge_info.
Since the deferred directories are known to not add any relevant sources
due to the above properties, then if there are no relevant sources after
we've traversed all paths other than the deferred ones, then we know
there are not any relevant sources. Under those conditions, rename
detection is unnecessary, and that means we can resolve the deferred
directories without recursing into them.
Note that the logic for skipping rename detection was also modified
further in commit 76e253793c ("merge-ort, diffcore-rename: employ cached
renames when possible", 2021-01-30); in particular rename detection can
be skipped if we already have cached renames for each relevant source.
We can take advantage of this information as well with our deferral of
recursing into directories where one side matches the merge base.
Add some data structures that we will use to do these deferrals, with
some lengthy comments explaining their purpose.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch possibly raises some questions about whether
additional cases in collect_merge_info_callback() can be handled early.
Add some explanations in the form of comments to help explain these
better. While we're at it, add a few comments to denote what a few
boolean '0' or '1' values stand for.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there are no directories involved at a given path, and all three
sides have a file at that path, and two of the three sides of history
match, we can immediately resolve the merge of that path in
collect_merge_info() and do not need to wait until process_entries().
This is actually a very minor improvement: half the time when I run it,
I see an improvement; the other half a slowdown. It seems to be in the
range of noise. However, this idea serves as the beginning of some
bigger optimizations coming in the following patches.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the documentation not to assume users are of certain gender
and adds to guidelines to do so.
* ds/gender-neutral-doc:
*: fix typos
comments: avoid using the gender of our users
doc: avoid using the gender of other people
|
|
Prepare the internals for lazily fetching objects in submodules
from their promisor remotes.
* jt/partial-clone-submodule-1:
promisor-remote: teach lazy-fetch in any repo
run-command: refactor subprocess env preparation
submodule: refrain from filtering GIT_CONFIG_COUNT
promisor-remote: support per-repository config
repository: move global r_f_p_c to repo struct
|
|
Code cleanup around struct_type_init() functions.
* ab/struct-init:
string-list.h users: change to use *_{nodup,dup}()
string-list.[ch]: add a string_list_init_{nodup,dup}()
dir.[ch]: replace dir_init() with DIR_INIT
*.c *_init(): define in terms of corresponding *_INIT macro
*.h: move some *_INIT to designated initializers
|
|
Tiny test clean-up.
* dd/test-stdout-count-lines:
t6402: preserve git exit status code
t6400: preserve git ls-files exit status code
test-lib-functions: introduce test_stdout_line_count
|
|
Test clean-up.
* hn/refs-test-cleanup:
t7509: avoid direct file access for writing CHERRY_PICK_HEAD
t1415: avoid direct filesystem access for writing refs
|
|
Code clean-up.
* rs/khash-alloc-cleanup:
khash: clarify that allocations never fail
|
|
Tiny code clean-up.
* ar/help-micro-cleanup:
help: convert git_cmd to page in one place
|
|
Code clean-up.
* ar/submodule-helper-include-cleanup:
submodule--helper: remove redundant include
|
|
Code clean-up and leak plugging in "git bundle".
* ab/bundle-updates:
bundle: remove "ref_list" in favor of string-list.c API
bundle.c: use a temporary variable for OIDs and names
bundle cmd: stop leaking memory from parse_options_cmd_bundle()
|
|
Tiny API tweak.
* hn/refs-iterator-peel-returns-boolean:
refs: make explicit that ref_iterator_peel returns boolean
|
|
Fill test gaps.
* ab/mktag-tests:
mktag tests: test fast-export
mktag tests: test for-each-ref
mktag tests: test update-ref and reachable fsck
mktag tests: test hash-object --literally and unreachable fsck
mktag tests: invert --no-strict test
mktag tests: parse out options in helper
|
|
Fill test gaps.
* ab/show-branch-tests:
show-branch tests: add missing tests
show-branch: don't <COLOR></RESET> for space characters
show-branch tests: modernize test code
show-branch tests: rename the one "show-branch" test file
|
|
Code recently added to support common ancestry negotiation during
"git push" did not sanity check its arguments carefully enough.
* ab/fetch-negotiate-segv-fix:
fetch: fix segfault in --negotiate-only without --negotiation-tip=*
fetch: document the --negotiate-only option
send-pack.c: move "no refs in common" abort earlier
|
|
Use ".DELETE_ON_ERROR" pseudo target to simplify our Makefile.
* ab/make-delete-on-error:
Makefile: add and use the ".DELETE_ON_ERROR" flag
|
|
Error message update.
* ew/mmap-failures:
xmmap: inform Linux users of tuning knobs on ENOMEM
|
|
Whitespace fix.
* js/config-mak-windows-pcre-fix:
config.mak.uname: PCRE1 cleanup
|
|
Update the location of system-side configuration file on Windows.
* js/gfw-system-config-loc-fix:
config: normalize the path of the system gitconfig
cmake(windows): set correct path to the system Git config
mingw: move Git for Windows' system config where users expect it
|
|
Code cleanup.
* ks/submodule-cleanup:
submodule: remove unnecessary `prefix` based option logic
|
|
When rebuilding the multi-pack index file reusing an existing one,
we used to blindly trust the existing file and ended up carrying
corrupted data into the updated file, which has been corrected.
* tb/midx-use-checksum:
midx: report checksum mismatches during 'verify'
midx: don't reuse corrupt MIDXs when writing
commit-graph: rewrite to use checksum_valid()
csum-file: introduce checksum_valid()
|
|
The merge code had funny interactions between content based rename
detection and directory rename detection.
* en/merge-dir-rename-corner-case-fix:
merge-recursive: handle rename-to-self case
merge-ort: ensure we consult df_conflict and path_conflicts
t6423: test directory renames causing rename-to-self
|
|
Performance tweaks of "git merge -sort" around lazy fetching of objects.
* en/ort-perf-batch-13:
merge-ort: add prefetching for content merges
diffcore-rename: use a different prefetch for basename comparisons
diffcore-rename: allow different missing_object_cb functions
t6421: add tests checking for excessive object downloads during merge
promisor-remote: output trace2 statistics for number of objects fetched
|
|
More fix-ups and optimization to "merge -sort".
* en/ort-perf-batch-12:
merge-ort: miscellaneous touch-ups
Fix various issues found in comments
diffcore-rename: avoid unnecessary strdup'ing in break_idx
merge-ort: replace string_list_df_name_compare with faster alternative
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git grep --and -e foo" ought to have been diagnosed as an error
but instead segfaulted, which has been corrected.
* rs/grep-parser-fix:
grep: report missing left operand of --and
|
|
Doc typo/grammo-fix.
* bk/doc-commit-typofix:
Documentation: fix typo in the --patch option of the commit command
|
|
Prevent "git p4" from failing to submit changes to binary file.
* dc/p4-binary-submit-fix:
git-p4: fix failed submit by skip non-text data files
|
|
Test fix.
* ab/pre-auto-gc-hook-test:
gc tests: add a test for the "pre-auto-gc" hook
|
|
The "union" conflict resolution variant misbehaved when used with
binary merge driver.
* jk/union-merge-binary:
ll_union_merge(): rename path_unused parameter
ll_union_merge(): pass name labels to ll_xdl_merge()
ll_binary_merge(): handle XDL_MERGE_FAVOR_UNION
|
|
CMake update.
* mr/cmake:
cmake: add warning for ignored MSGFMT_EXE
cmake: create compile_commands.json by default
cmake: add knob to disable vcpkg
|
|
Various updates to tests around "git describe"
* ab/describe-tests-fix:
describe tests: support -C in "check_describe"
describe tests: fix nested "test_expect_success" call
describe tests: don't rely on err.actual from "check_describe"
describe tests: refactor away from glob matching
describe tests: improve test for --work-tree & --dirty
|
|
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
|
|
Preliminary clean-up of tests before the main reftable changes
hits the codebase.
* hn/prep-tests-for-reftable: (22 commits)
t1415: set REFFILES for test specific to storage format
t4202: mark bogus head hash test with REFFILES
t7003: check reflog existence only for REFFILES
t7900: stop checking for loose refs
t1404: mark tests that muck with .git directly as REFFILES.
t2017: mark --orphan/logAllRefUpdates=false test as REFFILES
t1414: mark corruption test with REFFILES
t1407: require REFFILES for for_each_reflog test
test-lib: provide test prereq REFFILES
t5304: use "reflog expire --all" to clear the reflog
t5304: restyle: trim empty lines, drop ':' before >
t7003: use rev-parse rather than FS inspection
t5000: inspect HEAD using git-rev-parse
t5000: reformat indentation to the latest fashion
t1301: fix typo in error message
t1413: use tar to save and restore entire .git directory
t1401-symbolic-ref: avoid direct filesystem access
t1401: use tar to snapshot and restore repo state
t5601: read HEAD using rev-parse
t9300: check ref existence using test-helper rather than a file system check
...
|
|
Some more code and doc clarification around "git push".
* fc/push-simple-updates-cleanup:
push: don't get a full remote object
push: only check same_remote when needed
push: remove trivial function
push: remove redundant check
push: factor out the typical case
push: get rid of all the setup_push_* functions
push: trivial simplifications
push: make setup_push_* return the dst
push: only get the branch when needed
push: factor out null branch check
push: split switch cases
push: return immediately in trivial switch case
push: create new get_upstream_ref() helper
|
Elijah Newren
Junio C Hamano