| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out pre context line handling into the new function
show_pre_context() and change the algorithm to rewind by looking for
newline characters and roll forward again, instead of maintaining an
array of line beginnings and ends.
This is slower for hits, but the cost for non-matching lines becomes
zero. Normally, there are far more non-matching lines, so the time
spent in total decreases.
Before this patch (current Linux kernel repo, best of five runs):
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.134s
user 0m1.932s
sys 0m0.196s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m12.059s
user 0m11.837s
sys 0m0.224s
The same with this patch:
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.117s
user 0m1.892s
sys 0m0.228s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m2.986s
user 0m2.696s
sys 0m0.288s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Print a hunk mark before matches from a new file are shown, in addition
to the current behaviour of printing them if lines have been skipped.
The result is easier to read, as (presumably unrelated) matches from
different files are separated by a hunk mark. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move last_shown into struct grep_opt, to make it available in
show_line(), and then make the function handle the printing of hunk
marks for context lines in a central place.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
xdiff_set_find_func() is used to set user defined regular expressions
for finding function signatures. Add xdiff_clear_find_func(), which
frees the memory allocated by the former, making the API complete.
Also, use the new function in diff.c (the only call site of
xdiff_set_find_func()) to clean up after ourselves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
|
|
Free the memory allocated for struct strbuf pathbuf when we're done.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a new argv array from a configured alias and the supplied
command line arguments, the new argv was allocated with one element too
many. Since the first element of the original argv array is skipped when
copying it to the new_argv, the number of elements that are allocated
should be reduced by one. 'count' is the number of elements that new_argv
contains, and *argcp is the number of elements in the original argv array.
So the total allocation (including the terminating NULL entry) for the
new_argv array should be:
count + (*argcp - 1) + 1
Also, the explicit assignment of the NULL terminating entry can be avoided
by just copying it over from the original argv array.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ff06c74 (Improve request-pull to handle non-rebased branches, 2007-05-01)
attempted to disable pager when running subcommands in this script, but
with a wrong variable. If GIT_PAGER is set, it takes precedence over
PAGER.
Noticed by Michal Marek.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The following invocations did not work as expected on Windows:
git mv foo\bar dest
git mv foo\ dest
The first command was interpreted as
git mv foo/bar dest/foo/bar
because the Windows style directory separator was not obeyed when the
basename of 'foo\bar' was computed.
The second command failed because the Windows style directory separator was
not removed from the source directory, whereupon the lookup of the
directory in the index failed.
This fixes both issues by using is_dir_sep() and basename().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update to include branch.*.rebase, remote.*.pushurl, and
add.ignore-errors
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are some different but little cleanup changes to fix some missing
quotes, to fix what seemed to be an unended sentence, to reident a
little paragraph with too large a sentence and fix a branch name that
was referred to twice later by another name.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This dependency was not yet specified anywhere else.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Backtick and apostrophe are asciidoc markup, so they should be escaped
in order to get the expected result in the rendered manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I do various statistics on git, and one of the things I look at is merges,
because they are often interesting events to count ("how many merges vs
how much 'real development'" kind of statistics). And you can do it with
some fairly straightforward scripting, ie
git rev-list --parents HEAD |
grep ' .* ' |
git diff-tree --always -s --pretty=oneline --stdin |
less -S
will do it.
But I finally got irritated with the fact that we can skip merges with
'--no-merges', but we can't do the trivial reverse operation.
So this just adds a '--merges' flag that _only_ shows merges. Now you can
do the above with just a
git log --merges --pretty=oneline
which is a lot simpler. It also means that we automatically get a lot of
statistics for free, eg
git shortlog -ns --merges
does exactly what you'd want it to do.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://git.bogomips.org/git-svn:
git svn: Doc update for multiple branch and tag paths
git svn: cleanup t9138-multiple-branches
git-svn: Canonicalize svn urls to prevent libsvn assertion
t9138: remove stray dot in test which broke bash
git-svn: convert globs to regexps for branch destinations
git svn: Support multiple branch and tag paths in the svn repository.
Add 'git svn reset' to unwind 'git svn fetch'
git-svn: speed up find_rev_before
Add 'git svn help [cmd]' which works outside a repo.
git-svn: let 'dcommit $rev' work on $rev instead of HEAD
|
|
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Using the "svn_cmd" wrapper instead of "svn" alone allows tests
to run consistently for users with customized
~/.subversion/configs. Additionally, using subshells via
"(cd ...)" allow cleaner and less error-prone tests to
be written.
[ew: expanded commit message]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
* pb/send-email-cccmd-fix:
t/t9001-send-email.sh: ensure generated script is executed with $SHELL_PATH
|
|
* maint:
gitweb/README: fix AliasMatch in example
Test grep --and/--or/--not
Test git archive --remote
fread does not return negative on error
|
|
When combining "dumb client" and human-friendly access by using the
'.git' extension to switch between the two, make sure the AliasMatch
covers the entire request. Without a full match, a request for
http://git.example.com/project/shortlog/branch..gitsomething
would result in a 404 because the server would try to access the
the project 'project/shortlog/branch.'
The solution is still not bulletproof, so document the possible failing
case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a small test case for git archive --remote (and thus
git-upload-archive), which so far went untested.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cloning/initializing svn repositories with an uncanonicalize url
does not work as libsvn throws an assertion. This patch
canonicalize svn uris for the clone and init command from
git-svn.
[ew: fixed trailing whitespace]
Signed-off-by: Ulrich Dangel <uli@spamt.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
The stray dot broke bash and probably some other shells,
but worked fine with dash in my limited testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Marc Branchaud wrote:
> I'm fairly happy with this, except for the way the branch
> subcommand matches refspecs. The patch does a simple string
> comparison, but it'd be better to do an actual glob. I just
> couldn't track down the right function for that, so I left it as
> a strcmp and hope that a gitizen can tell me how to glob here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
This enables git-svn.perl to read multiple 'branches' and 'tags' entries in
svn-remote config sections. The init and clone subcommands also support
multiple --branches and --tags arguments.
The branch (and tag) subcommand gets a new argument: --destination (or -d).
This argument is required if there are multiple branches (or tags) entries
configured for the remote Subversion repository. The argument's value
specifies which branch (or tag) path to use to create the branch (or tag).
The specified value must match the left side (without wildcards) of one of
the branches (or tags) refspecs in the svn-remote's config.
[ew: avoided explicit loop when combining globs with "push"]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
By limiting start revision of find_rev_before to max existing
revision. This avoids a long wait if you do
'git svn reset -r 9999999'. The linear search within the
contiguous revisions doesn't seem to be a problem.
[ew: expanded commit message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Previously there was no explicit 'help' command, but 'git svn help'
still printed the usage message (as an invalid command), provided you
got past the initialization steps that required a valid repo.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
size_t res cannot be less than 0. fread returns 0 on error.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the shell is not specified using the '#!' notation, then the OS will
use '/bin/sh' to execute the script which may not produce the desired
results. In particular, /bin/sh on Solaris interprets '^' specially which
has an effect on the sed command that this patch touches.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t3700-add: add a POSIXPERM prerequisite to a new test
|
|
The new test does a 'chmod 0', which does not have the intended
effect on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ak/maint-for-each-ref-no-lookup:
for-each-ref: Do not lookup objects when they will not be used
|
|
* rc/maint-http-local-slot-fix:
http*: cleanup slot->local after fclose
|
|
* cb/maint-no-double-merge:
refuse to merge during a merge
|
|
* mn/maint-iconv-autoconf:
fix handling of iconv configuration options
|
|
* lt/maint-unsigned-left-shift:
Fix big left-shifts of unsigned char
|
|
* pb/maint-1.6.2-userdiff-fix:
upload-archive: fix infinite loop on Cygwin
avoid exponential regex match for java and objc function names
|
|
That is what the documentation says, but the code pretends as if all the
known whitespace error tokens were given.
Among the whitespace error tokens, there is one kind that loosens the rule
when set: cr-at-eol. Which means that whitespace error token that is set
to true ignores a newly introduced CR at the end, which is inconsistent
with the documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a CR is accidentally added at the end of a C source file in the git
project tree, "git diff --check" doesn't detect it as an error.
$ echo abQ | tr Q '\015' >>fast-import.c
$ git diff --check
I think this is because the "whitespace" attribute is set to *.[ch] files
without specifying what kind of errors are caught. It makes git "notice
all types of errors" (as described in the documentation), but I think it
is incorrectly setting cr-at-eol, too, and hides this error.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test wanted to make sure that cherry-pick exits with status 1,
but with the way it was placed after "git checkout master &&" meant
that it could have misjudged success if checkout barfed with the
same failure status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
|
René Scharfe
Junio C Hamano
Brandon Casey
Johannes Sixt
Stephen Boyd
Thadeu Lima de Souza Cascardo
Miklos Vajna
Linus Torvalds
Marc Branchaud
Giuseppe Bilotta
Thomas Rast
Ulrich Dangel
Eric Wong
Ben Jackson
Roel Kluin
Bert Wesarg
Nanako Shiraishi