| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Reading diff output is sometimes very hard, even if it's colored,
especially if lines differ only in few characters. This is often true
when a commit fixes a typo or renames some variables or functions.
This commit teaches gitweb to highlight characters that are different
between old and new line with a light green/red background. This should
work in the similar manner as in Trac or GitHub.
The algorithm that compares lines is based on contrib/diff-highlight.
Basically, it works by determining common prefix/suffix of corresponding
lines and highlightning only the middle part of lines. For more
information, see contrib/diff-highlight/README.
Combined diffs are not supported but a following commit will change it.
Since we need to pass esc_html()'ed or esc_html_hl_regions()'ed lines to
format_diff_lines(), so it was taught to accept preformatted lines
passed as a reference.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now lines are formatted closer to place where we actually use HTML
formatted output.
This means that we put raw lines in the @chunk accumulator, rather than
formatted lines. Because we still need to know class (type) of line
when accumulating data to post-process and print, process_diff_line()
subroutine was retired and replaced by diff_line_class() used in
git_patchset_body() and new restructured format_diff_line() used in
print_diff_chunk().
As a side effect, we have to pass \%from and \%to down to callstack.
This is a preparation patch for diff refinement highlightning. It's not
meant to change gitweb output.
[jn: wrote commit message]
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This renames print_sidebyside_diff_chunk() to print_diff_chunk() and
makes use of it for both side-by-side and inline diffs. Now diff lines
are always accumulated before they are printed. This opens the
possibility to preprocess diff output before it's printed, which is
needed for diff refinement highlightning (implemented in incoming
patches).
If print_diff_chunk() was left as is, the new function
print_inline_diff_lines() could reorder diff lines. It first prints all
context lines, then all removed lines and finally all added lines. If
the diff output consisted of mixed added and removed lines, gitweb would
reorder these lines. This is true for combined diff output, for
example:
- removed line for first parent
+ added line for first parent
-removed line for second parent
++added line for both parents
would be rendered as:
- removed line for first parent
-removed line for second parent
+ added line for first parent
++added line for both parents
To prevent gitweb from reordering lines, print_diff_chunk() calls
print_diff_lines() as soon as it detects that both added and removed
lines are present and there was a class change, and at the end of chunk.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, print_sidebyside_diff_chunk() does two things: it
accumulates diff lines and prints them. Accumulation may be used to
perform additional operations on diff lines, so it makes sense to split
these two things. Thus, whole code that formats and prints diff lines
in the 'side-by-side' manner is moved out of print_sidebyside_diff_chunk()
to a separate subroutine and two conditions that control printing
diff liens are merged.
Thanks to that, we can easily (in later patches) replace call to that
subroutine with a call to more generic print_diff_lines() that will
control whether 'inline' or 'side-by-side' diff should be printed.
As a side effect, context lines are printed just before printing added
and removed lines, and at the end of chunk (previously, they were
printed immediately on the class change). However, this doesn't change
gitweb output.
The outcome of this patch is that print_sidebyside_diff_chunk() is now
much shorter and easier to read.
While at it, drop the '# assume that it is change' comment. According
to Jakub Narębski:
What I meant here when I was writing it that they are lines that
changed between two versions, like '!' in original (not unified)
context format.
We can omit this comment.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this change, esc_html_hl_regions() accepts options and passes them
down to esc_html(). This may be needed if a caller wants to pass
-nbsp=>1 to esc_html().
The idea and implementation example of this change was described in
337da8d2 (gitweb: Introduce esc_html_match_hl and esc_html_hl_regions,
2012-02-27). While other suggestions may be more useful in some cases,
there is no need to implement them at the moment. The
esc_html_hl_regions() interface may be changed later if it's needed.
[mk: extracted from larger patch and wrote commit message]
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If $end is equal to or less than $begin, esc_html_hl_regions()
generates an empty <span> element. It normally shouldn't be visible in
the web browser, but it doesn't look good when looking at page source.
It also minimally increases generated page size for no special reason.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The $s->[0] and $s->[1] variables look a bit cryptic. Let's rename them
to $begin and $end so that it's clear what they do.
Suggested-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Found by running this command:
$ git ls-files -z|xargs -0 perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt]o)\s+\1\b/gims)' \
-e ' {' \
-e ' $n = ($` =~ tr/\n/\n/ + 1);' \
-e ' ($v = $&) =~ s/\n/\\n/g;' \
-e ' print "$ARGV:$n:$v\n";' \
-e ' }'
Why not just git grep -E ...?
That wouldn't work then the doubled words are separated by a newline.
This is derived from a Makefile syntax-check rule in gnulib's maint.mk:
http://git.sv.gnu.org/cgit/gnulib.git/tree/top/maint.mk
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'master' of git://github.com/git-l10n/git-po:
Add url of Swedish l10n team in TEAMS file
l10n: Review zh_CN translation for Git 1.7.10-rc1
Update Swedish translation (724t0f0u).
l10n: Update zh_CN translation for Git 1.7.10-rc1
l10n: Update git.pot (1 new message)
|
|
$COLUMNS must be unset to not interfere with the tests. The tests
already ignore the terminal size because output is redirected to a
file, but COLUMNS overrides terminal size detection and changes the
test output away from the standard 80.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Overall review of the zh_CN translation:
- Distinguish the translations of index and stage, though they are the
same thing.
- Many other fixes, e.g., add the lost periods at the end of translated
sentences.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
- Update for 1.7.10-rc1.
- Add a missing -e when generaring the "Untracked files" message.
- Fixed some wordings after playing with the localized version.
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/maint-fast-import-empty-ls:
fast-import: don't allow 'ls' of path with empty components
fast-import: leakfix for 'ls' of dirty trees
|
|
* ph/rerere-doc:
rerere: Document 'rerere remaining'
|
|
* ms/maint-config-error-at-eol-linecount:
config: report errors at the EOL with correct line number
|
|
All of the other options were included in the synopsis, so it makes
sense to include these as well.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously GIT_EDITOR was not listed in git(1) "Environment Variables" section,
which could be very confusing to users. Include it in "other" subsection along
with a link to git-var(1), since that is the page that fully describes all
places where editor can be set and also their preference order.
Also, git-var(1) did not say that hardcoded fallback 'vi' may have been changed
at build time. A user could be puzzled if 'nano' pops up even when none of the
mentioned environment vars or config.editor are set. Clarify this.
Ideally, the build system should be changed to reflect the chosen fallback
editor when creating the man pages. Not sure if that is even possible though.
Signed-off-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An alphabetic ordered list (a.) is converted to numerical in
the man page (1.) so context comments naming 'a' were confusing,
fix that by not using ordered list notation for 'a' anb 'b' items.
Signed-off-by: Nelson Benitez Leon <nelsonjesus.benitez@seap.minhap.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://ozlabs.org/~paulus/gitk:
gitk: Teach gitk to respect log.showroot
gitk: Add menu items for comparing a commit with the marked commit
gitk: Speed up resolution of short SHA1 ids
gitk: Use symbolic font names "sans" and "monospace" when available
gitk: Skip over AUTHOR/COMMIT_DATE when searching all fields
gitk: Make "git describe" output clickable, too
gitk: Fix the display of files when filtered by path
gitk: Use a tabbed dialog to edit preferences
gitk: Use "gitk: repo-top-level-dir" as window title
|
|
In early days, all projects managed by git (except for git itself) had the
product of a fairly mature development history in their first commit, and
it was deemed unnecessary clutter to show additions of these thousands of
paths as a patch.
"git log" learned to show the patch for the initial commit without requiring
--root command line option at 0f03ca9 (config option log.showroot to show
the diff of root commits, 2006-11-23).
Teach gitk to respect log.showroot.
[paulus@samba.org: Cleaned up the Tcl a bit, use --bool on the
git config call]
Signed-off-by: Marcus Karlsson <mk@acc.umu.se>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git shortlog -s -e" should show a single current address with this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* am/completion-zsh-fix:
contrib/completion: "local var=()" is misinterpreted as func-decl by zsh
|
|
Typofix.
* dw/gitweb-doc-grammo:
Documentation/gitweb: trivial English fixes
|
|
Change "it's" to "its" where a possessive is intended. Also add two
missing "the" that were noticed by Ben Walton.
Signed-off-by: David Waitzman <djw@bbn.com>
|
|
Sometimes one wants to see the different between two commits that are
a long distance apart in the graph display. This is difficult to do
with the "Diff this -> selected" and "Diff selected -> this" menu
items because the need to maintain the selection means that one can't
use the find facilities or the reference list window to navigate from
one to the other.
This provides an alternative using the mark. Having found one commit,
one marks it with the "Mark this commit" menu item, then navigates to
the other commit and uses the new "Diff this -> marked commit" and/or
"Diff marked commit -> this" menu items.
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Certain versions of zsh seems to treat
local var=()
as a function declaration, rather than an assignment of an empty array,
although its documentation does not suggest that this should be the case.
With zsh 4.3.15 on Fedora Core 15, this causes
__git_ps1 " (%s)"
to trigger an error message:
local:2: command not found: svn_url_pattern
when GIT_PS1_SHOWUPSTREAM="auto".
Signed-off-by: Alex Merry <dev@randomguy3.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
|
|
* maint-1.7.8:
t/Makefile: Use $(sort ...) explicitly where needed
gitweb: Fix actionless dispatch for non-existent objects
i18n of multi-line advice messages
|
|
* ks/sort-wildcard-in-makefile:
t/Makefile: Use $(sort ...) explicitly where needed
|
|
* jc/advise-i18n:
i18n of multi-line advice messages
|
|
* jn/gitweb-unspecified-action:
gitweb: Fix actionless dispatch for non-existent objects
|
|
On large repositories such as the Linux kernel, it can take quite a
noticeable time (several seconds) for gitk to resolve short SHA1 IDs
to their long form. This speeds up the process by maintaining lists
of IDs indexed by the first 4 characters of the SHA1 ID, speeding up
the search by a factor of 65536 on large repositories.
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
The following only concerns systems using X and the client-side font
rendering framework from freedesktop.org. Windows and Mac OS X are
not affected.
Starting with version 8.5, Tk uses freetype and fontconfig by default
to render fonts on platforms that support it. Gitk currently defaults
to the font Helvetica for the interface and Courier for diffs, and
both unfortunately look rather bad on screen in the default
configuration on many Linux distros with anti-aliasing and poor
hinting.
It is better to default to "sans" and "monospace", which are mapped by
fontconfig to some appropriate font of the sysadmin and user's
choosing (typically Bitstream Vera Sans and Mono). The result looks
more sensible and it makes gitk feel like a well-behaved software
citizen since its fonts match other native apps.
This patch does not change the appearance of gitk for users that have
already run it, since gitk uses the remembered UI and diff font names
from ~/.gitk.
Requested-by: Michael Biebl <biebl@debian.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
This prevents a search for a number like "105" on "All Fields" from
matching against the raw author and commit timestamps. These
timestamps were already not searchable by themselves, and the
displayed format does not match the query string anyway.
Signed-off-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Automake's contribution guidelines suggest using "git describe" output
in commit logs to reference previous commits. By contrast, in
coreutils, I had acquired the habit of using a bare SHA1 prefix (8 hex
digits), since gitk creates clickable links for that, and not for "git
describe" output.
I prefer the readability of the full "git describe" output, yet want
to retain the gitk links, so this renders as clickable not just
SHA1-like strings, but also an SHA1-like string that is prefixed by
"-g".
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Launching 'gitk -- .' or 'gitk -- ..\t' restricts the display to files
under the given directory but the file list is left empty. This is because
the path_filter function fails to match the filenames which are relative
to the working tree to the filter which is filessytem relative.
This solves the problem by making both names fully qualified filesystem
paths before performing the comparison.
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
This commit converts the user preferences dialog into a tabbed property
sheet grouping general properties, colours and font selections onto
separate pages. The previous implementation was exceeding the screen
height on some systems and this avoids such problems and permits extension
using new pages in the future.
If themed Tk is unavailable or undesired a reasonable facsimile of the
tabbed notebook widget is used instead.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Previously, when run in a subdirectory, gitk would show the name
of this subdirectory as title, which was misleading. When run with
GIT_DIR set, it would show the cwd, which is even more misleading.
In case of non-bare repos, the .git suffix in the path is skipped.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
|
|
* ab/perl-i18n:
perl/Makefile: install Git::I18N under NO_PERL_MAKEMAKER
Git::I18N: compatibility with perl <5.8.3
|
|
When I added the i18n infrastructure in v1.7.8-rc2-1-g5e9637c I forgot
to install Git::I18N also when NO_PERL_MAKEMAKER=YesPlease was
set. Change the generation of the fallback perl.mak file to do that.
Now Git/I18N.pm is installed alongside Git.pm in such a way that
anything that uses GITPERLLIB will find it.
Reported-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* th/mergetools-deltawalker:
Documentation/difftool: add deltawalker to list of valid diff tools
|
|
The code to validate the history connectivity between old refs and new
refs used by fetch and receive-pack, introduced in 1.7.8, was grossly
inefficient and unnecessarily tried to re-validate integrity of individual
objects. This essentially reverts that performance regression.
* jc/maint-verify-objects-remove-pessimism:
fetch/receive: remove over-pessimistic connectivity check
|
Michał Kiedrowicz
Jakub Narębski
Junio C Hamano
Jim Meyering
Zbigniew Jędrzejewski-Szmek
Jiang Xin
Peter Krefting
Mark Lodato
Rodrigo Silva (MestreLion)
Nelson Benitez Leon
Marcus Karlsson
D Waitzman
Paul Mackerras
Alex Merry
Jonathan Nieder
Frédéric Brière
Pat Thoyts
Ævar Arnfjörð Bjarmason