| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The option to gpg sign a merge commit is available but was not
documented. Use wording from the git-commit(1) manpage.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/upload-pack-keepalive:
upload-pack: bump keepalive default to 5 seconds
upload-pack: send keepalive packets during pack computation
|
|
* bc/http-backend-allow-405:
http-backend: provide Allow header for 405
|
|
* jc/cvsserver-perm-bit-fix:
cvsserver: pick up the right mode bits
|
|
* js/add-i-mingw:
add--interactive: fix external command invocation on Windows
|
|
* nd/git-dir-pointing-at-gitfile:
Make setup_git_env() resolve .git file when $GIT_DIR is not specified
|
|
* jk/has-sha1-file-retry-packed:
has_sha1_file: re-check pack directory before giving up
|
|
* ap/commit-author-mailmap:
commit: search author pattern against mailmap
|
|
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
Conflicts:
t/t3404-rebase-interactive.sh
|
|
* rt/rebase-p-no-merge-summary:
rebase --preserve-merges: ignore "merge.log" config
|
|
* es/rebase-i-respect-core-commentchar:
rebase -i: fix cases ignoring core.commentchar
|
|
- Don't start tests with 'test $? = 0' to catch preparation done
outside the test_expect_success block.
- Move writing the bogus patch and the expected output into the
appropriate test_expect_success blocks.
- Use the test_must_fail helper instead of manually checking for
non-zero exit code.
- Use the debug-friendly test_path_is_file helper instead of 'test -f'.
- No space after '>'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-prune-packed operates on GIT_OBJECT_DIRECTORY, not
GIT_OBJECT_DIR.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 920b691 (clone: refuse to clone if --branch
points to bogus ref) we refuse to clone with option
"-b" if the specified branch does not exist in the
(non-empty) upstream. If the upstream repository is empty,
the branch doesn't exist, either. So refuse the clone too.
Reported-by: Robert Mitwicki <robert.mitwicki@opensoftware.pl>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
* mm/rebase-continue-freebsd-WB:
rebase: fix run_specific_rebase's use of "return" on FreeBSD
|
|
* km/svn-1.8-serf-only:
Git.pm: revert _temp_cache use of temp_is_locked
git-svn: allow git-svn fetching to work using serf
Git.pm: add new temp_is_locked function
|
|
* js/xread-in-full:
stream_to_pack: xread does not guarantee to read all requested bytes
|
|
* bc/send-email-ssl-die-message-fix:
send-email: don't call methods on undefined values
|
|
Mediawiki introduces a new API for queries w/ more than 500 results in
version 1.21. That change triggered an infinite loop while cloning a
mediawiki with such a page.
The latest API renamed and moved the "continuing" information in the
response, necessary to build the next query. The code failed to retrieve
that information but still detected that it was in a "continuing
query". As a result, it launched the same query over and over again.
If a "continuing" information is detected in the response (old or new),
the next query is updated accordingly. If not, we quit assuming it's not
a continuing query.
Reported-by: Benjamin Cathey
Signed-off-by: Benoit Person <benoit.person@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some people still use rather old versions of bash, which cannot grok
some constructs like 'printf -v varname' the prompt and completion
code started to use recently.
* bc/completion-for-bash-3.0:
contrib/git-prompt.sh: handle missing 'printf -v' more gracefully
t9902-completion.sh: old Bash still does not support array+=('') notation
git-completion.bash: use correct Bash/Zsh array length syntax
|
|
Fixes a minor bug in "git rebase -i" (there could be others, as the
root cause is pretty generic) where the code feeds a random, data
dependeant string to 'echo' and expects it to come out literally.
* mm/no-shell-escape-in-die-message:
die_with_status: use "printf '%s\n'", not "echo"
|
|
* jl/some-submodule-config-are-not-boolean:
avoid segfault on submodule.*.path set to an empty "true"
|
|
Output from "git log --full-diff -- <pathspec>" looked strange,
because comparison was done with the previous ancestor that touched
the specified <pathspec>, causing the patches for paths outside the
pathspec to show more than the single commit has changed.
* tr/log-full-diff-keep-true-parents:
log: use true parents for diff when walking reflogs
log: use true parents for diff even when rewriting
|
|
The auto-tag-following code in "git fetch" tries to reuse the same
transport twice when the serving end does not cooperate and does
not give tags that point to commits that are asked for as part of
the primary transfer. Unfortunately, Git-aware transport helper
interface is not designed to be used more than once, hence this
does not work over smart-http transfer.
* jc/transport-do-not-use-connect-twice-in-fetch:
builtin/fetch.c: Fix a sparse warning
fetch: work around "transport-take-over" hack
fetch: refactor code that fetches leftover tags
fetch: refactor code that prepares a transport
fetch: rename file-scope global "transport" to "gtransport"
t5802: add test for connect helper
|
|
Send a large request to read(2)/write(2) as a smaller but still
reasonably large chunks, which would improve the latency when the
operation needs to be killed and incidentally works around broken
64-bit systems that cannot take a 2GB write or read in one go.
* sp/clip-read-write-to-8mb:
Revert "compat/clipped-write.c: large write(2) fails on Mac OS X/XNU"
xread, xwrite: limit size of IO to 8MB
|
|
* jk/mailmap-incomplete-line:
mailmap: handle mailmap blobs without trailing newlines
|
|
322bb6e (2011 Aug 11) introduced a new subshell at the end of a test
case but omitted a '&&' to join the two; fix this.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The HTTP 1.1 standard requires an Allow header for 405 Method Not Allowed:
The response MUST include an Allow header containing a list of valid methods
for the requested resource.
So provide such a header when we return a 405 to the user agent.
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'maint' of git://github.com/git-l10n/git-po:
l10n: de.po: use "das Tag" instead of "der Tag"
|
|
When determining the file mode from either ls-tree or diff-tree
output, we used to grab these octal mode string (typically 100644 or
100755) and then did
$git_perms .= "r" if ( $mode & 4 );
$git_perms .= "w" if ( $mode & 2 );
$git_perms .= "x" if ( $mode & 1 );
which was already wrong, as (100644 & 4) is very different from
oct("100644") & 4. An earlier refactoring 2c3af7e7 (cvsserver:
factor out git-log parsing logic, 2012-10-13) further changed it to
pick the third octal digit (10*0*644 or 10*0*755) from the left and
then do the above conversion, which does not make sense, either.
Let's use the third digit from the last of the octal mode string to
make sure we get the executable and read bits right.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Michael Cronenworth <mike@cchtml.com>
|
|
If SSL verification is enabled in git send-email, we could attempt to call a
method on an undefined value if the verification failed, since $smtp would end
up being undef. Look up the error string in a way that will produce a helpful
error message and not cause further errors.
Signed-off-by: Brian M. Carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no reason not to turn on keepalives by default.
They take very little bandwidth, and significantly less than
the progress reporting they are replacing. And in the case
that progress reporting is on, we should never need to send
a keepalive anyway, as we will constantly be showing
progress and resetting the keepalive timer.
We do not necessarily know what the client's idea of a
reasonable timeout is, so let's keep this on the low side of
5 seconds. That is high enough that we will always prefer
our normal 1-second progress reports to sending a keepalive
packet, but low enough that no sane client should consider
the connection hung.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When upload-pack has started pack-objects, there may be a quiet
period while pack-objects prepares the pack (i.e., counting objects
and delta compression). Normally we would see (and send to the
client) progress information, but if "--quiet" is in effect,
pack-objects will produce nothing at all until the pack data is
ready. On a large repository, this can take tens of seconds (or even
minutes if the system is loaded or the repository is badly packed).
Clients or intermediate proxies can sometimes give up in this
situation, assuming that the server or connection has hung.
This patch introduces a "keepalive" option; if upload-pack sees no
data from pack-objects for a certain number of seconds, it will send
an empty sideband data packet to let the other side know that we are
still working on it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since a1549e10, git-rebase--am.sh uses the shell's "return" statement, to
mean "return from the current file inclusion", which is POSIXly correct,
but badly interpreted on FreeBSD, which returns from the current
function, hence skips the finish_rebase statement that follows the file
inclusion.
Make the use of "return" portable by using the file inclusion as the last
statement of a function.
Reported-by: Christoph Mallon <christoph.mallon@gmx.de>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use "das Tag" to avoid confusion with the German word "Tag" (day).
Reported-by: Dirk Heinrichs <dirk.heinrichs@altum.de>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
The recent "short-cut clone connectivity check" topic broke a shallow
repository when a fetch operation tries to auto-follow tags.
* nd/fetch-pack-shallow-fix:
fetch-pack: do not remove .git/shallow file when --depth is not specified
|
|
Compilation fix on platforms with fgetc() and friends defined as
macros.
* hv/config-from-blob:
config: do not use C function names as struct members
|
|
* maint-1.8.3:
Documentation/git-merge.txt: fix formatting of example block
|
|
* maint-1.8.2:
Documentation/git-merge.txt: fix formatting of example block
|
|
You need at least four dashes in a line to have it recognized as listing
block delimiter by asciidoc.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Back in 21e9757e (Hack git-add--interactive to make it work with
ActiveState Perl, 2007-08-01), the invocation of external commands was
changed to use qx{} on Windows. The rationale was that the command
interpreter on Windows is not a POSIX shell, but rather Windows's CMD.
That patch was wrong to include 'msys' in the check whether to use qx{}
or not: 'msys' identifies MSYS perl as shipped with Git for Windows,
which does not need the special treatment; qx{} should be used only with
ActiveState perl, which is identified by 'MSWin32'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://github.com/git-l10n/git-po:
l10n: fr.po: hotfix for commit 6b388fc
|
|
* maint-1.8.3:
fix shell syntax error in template
|
|
* maint-1.8.2:
fix shell syntax error in template
|
|
This makes reinitializing on a .git file repository work.
This is probably the only case that setup_git_env() (via
set_git_dir()) is called on a .git file. Other cases in
setup_git_dir_gently() and enter_repo() both cover .git file case
explicitly because they need to verify the target repo is valid.
Reported-by: Ximin Luo <infinity0@gmx.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we read a sha1 file, we first look for a packed
version, then a loose version, and then re-check the pack
directory again before concluding that we cannot find it.
This lets us handle a process that is writing to the
repository simultaneously (e.g., receive-pack writing a new
pack followed by a ref update, or git-repack packing
existing loose objects into a new pack).
However, we do not do the same trick with has_sha1_file; we
only check the packed objects once, followed by loose
objects. This means that we might incorrectly report that we
do not have an object, even though we could find it if we
simply re-checked the pack directory.
By itself, this is usually not a big deal. The other process
is running simultaneously, so we may run has_sha1_file
before it writes, anyway. It is a race whether we see the
object or not. However, we may also see other things
the writing process has done (like updating refs); and in
that case, we must be able to also see the new objects.
For example, imagine we are doing a for_each_ref iteration,
and somebody simultaneously pushes. Receive-pack may write
the pack and update a ref after we have examined the
objects/pack directory, but before the iteration gets to the
updated ref. When we do finally see the updated ref,
for_each_ref will call has_sha1_file to check whether the
ref is broken. If has_sha1_file returns the wrong answer, we
erroneously will think that the ref is broken.
For a normal iteration without DO_FOR_EACH_INCLUDE_BROKEN,
this means that the caller does not see the ref at all
(neither the old nor the new value). So not only will we
fail to see the new value of the ref (which is acceptable,
since we are running simultaneously with the writer, and we
might well read the ref before the writer commits its
write), but we will not see the old value either. For
programs that act on reachability like pack-objects or
prune, this can cause data loss, as we may see the objects
referenced by the original ref value as dangling (and either
omit them from the pack, or delete them via prune).
There's no test included here, because the success case is
two processes running simultaneously forever. But you can
replicate the issue with:
# base.sh
# run this in one terminal; it creates and pushes
# repeatedly to a repository
git init parent &&
(cd parent &&
# create a base commit that will trigger us looking at
# the objects/pack directory before we hit the updated ref
echo content >file &&
git add file &&
git commit -m base &&
# set the unpack limit abnormally low, which
# lets us simulate full-size pushes using tiny ones
git config receive.unpackLimit 1
) &&
git clone parent child &&
cd child &&
n=0 &&
while true; do
echo $n >file && git add file && git commit -m $n &&
git push origin HEAD:refs/remotes/child/master &&
n=$(($n + 1))
done
# fsck.sh
# now run this simultaneously in another terminal; it
# repeatedly fscks, looking for us to consider the
# newly-pushed ref broken. We cannot use for-each-ref
# here, as it uses DO_FOR_EACH_INCLUDE_BROKEN, which
# skips the has_sha1_file check (and if it wants
# more information on the object, it will actually read
# the object, which does the proper two-step lookup)
cd parent &&
while true; do
broken=`git fsck 2>&1 | grep remotes/child`
if test -n "$broken"; then
echo $broken
exit 1
fi
done
Without this patch, the fsck loop fails within a few seconds
(and almost instantly if the test repository actually has a
large number of refs). With it, the two can run
indefinitely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An if clause must not be empty; add a "colon" command.
Signed-off-by: Thorsten Glaser <t.glaser@tarent.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Nicolas Vigier
Junio C Hamano
SZEDER Gábor
Steffen Prohaska
Ralf Thielow
Jonathan Nieder
Benoit Person
Tay Ray Chuan
Brian M. Carlson
Jeff King
Matthieu Moy
Andreas Schwab
Johannes Sixt
Nguyễn Thái Ngọc Duy
Thorsten Glaser