summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-05-13coverage: build coverage-untested-functions by defaultLibravatar Thomas Rast1-1/+1
Change the 'coverage' target to build coverage-untested-functions by default, so as to make it more discoverable. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-13coverage: set DEFAULT_TEST_TARGET to avoid using proveLibravatar Thomas Rast1-1/+1
If the user sets DEFAULT_TEST_TARGET=prove in his config.mak, that carries over into the coverage tests. Which is really bad if he also sets GIT_PROVE_OPTS=-j<..> as that completely breaks the coverage runs. Instead of attempting to mess with the GIT_PROVE_OPTS, just force the test target to 'test' so that we run under make, like we intended all along. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-13coverage: do not delete .gcno files before buildingLibravatar Thomas Rast1-3/+6
The coverage-compile target depends on coverage-clean, which is supposed to remove the earlier build products that would get in the way of the next coverage test run. However, removing *.gcno is actively wrong. These are the files that contain the compile-time coverage related data. They are only rebuilt if the source is compiled. So if one ran 'make coverage' two times in a row, the second run would remove *.gcno, but then fail to recreate them because neither source files nor build flags have changed. (This remained hidden for so long most likely because any other intervening use of 'make' will change the build flags, causing a full rebuild.) So we make an exception for *.gcno. The *.gcda are the coverage results, written when the gcov-instrumented program is run. We still remove those, so as to get a one-test-run view of the data; you could probably argue the other way too. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-13coverage: split build target into compile and testLibravatar Thomas Rast1-3/+5
Confusingly, the coverage-build target in fact builds with gcov support _and runs tests_. Split it into two targets that actually are named after what they do. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-13Git 1.8.3-rc2Libravatar Junio C Hamano2-4/+9
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-13Merge git://ozlabs.org/~paulus/gitkLibravatar Junio C Hamano1-55/+199
* git://ozlabs.org/~paulus/gitk: gitk: On OSX, bring the gitk window to front gitk: Add support for -G'regex' pickaxe variant gitk: Add menu item for reverting commits gitk: Simplify file filtering gitk: Display the date of a tag in a human-friendly way gitk: Improve behaviour of drop-down lists gitk: Move hard-coded colors to .gitk
2013-05-13gitk: On OSX, bring the gitk window to frontLibravatar Tair Sabirgaliev1-0/+9
On OSX, Tcl/Tk application windows are created behind all the applications down the stack of windows. This is very annoying, because once a gitk window appears, it's the downmost window and switching to it is pain. The patch is: if we are on OSX, use osascript to bring the current Wish process window to front. Signed-off-by: Tair Sabirgaliev <tair.sabirgaliev@gmail.com> Thanks-to: Stefan Haller <lists@haller-berlin.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2013-05-13gitk: Add support for -G'regex' pickaxe variantLibravatar Martin Langhoff1-1/+4
git log -G'regex' is a very useful alternative to the classic pickaxe. Minimal patch to make it usable from gitk. [zj: reword message] [paulus@samba.org: reword droplist item] Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Paul Mackerras <paulus@samba.org>
2013-05-11test-bzr: do not use unportable sed '\+'Libravatar Torsten Bögershausen1-1/+1
Using sed -e '/[0-9]\+//' to find "one or more digits" is not portable. Use the Basic Regular Expression '/[0-9][0-9]*//' instead. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-11Merge git://git.bogomips.org/git-svnLibravatar Junio C Hamano9-7/+196
* git://git.bogomips.org/git-svn: git-svn: added an --include-path flag Git::SVN::*: add missing "NAME" section to perldoc git-svn: avoid self-referencing mergeinfo
2013-05-11gitk: Add menu item for reverting commitsLibravatar Knut Franke1-0/+62
Sometimes it's helpful (at least psychologically) to have this feature easily accessible. Code borrows heavily from cherrypick. Signed-off-by: Knut Franke <Knut.Franke@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2013-05-11gitk: Simplify file filteringLibravatar Felipe Contreras1-13/+7
git diff is perfectly able to do this with '-- files', no need for manual filtering. This makes gettreediffs consistent with getblobdiffs. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2013-05-11gitk: Display the date of a tag in a human-friendly wayLibravatar Anand Kumria1-1/+1
By selecting a tag within gitk you can display information about it. This information is output by using the command 'git cat-file tag <tagid>' This outputs the *raw* information from the tag, amongst which is the time - in seconds since the epoch. As useful as that value is, I find it a lot easier to read and process time which it is something like: "Mon Dec 31 14:26:11 2012 -0800" This change will modify the display of tags in gitk like so: @@ -1,7 +1,7 @@ object 5d417842efeafb6e109db7574196901c4e95d273 type commit tag v1.8.1 -tagger Junio C Hamano <gitster@pobox.com> 1356992771 -0800 +tagger Junio C Hamano <gitster@pobox.com> Mon Dec 31 14:26:11 2012 -0800 Git 1.8.1 -----BEGIN PGP SIGNATURE----- Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2013-05-11gitk: Improve behaviour of drop-down listsLibravatar Paul Mackerras1-1/+6
The drop-down lists used for things like the criteria for finding commits (containing/touching paths/etc.) use a combobox if we are using the ttk widgets. By default the combobox exports its value as the selection when it is changed, which is unnecessary, and sometimes the combobox wouldn't release the selection, which is annoying. To fix this, we make these comboboxes not export their selection, and also clear their selection whenever they are changed. This makes them more like a simple selection of alternatives, improving the look and feel of gitk. Signed-off-by: Paul Mackerras <paulus@samba.org>
2013-05-09Sync with v1.8.2.3Libravatar Junio C Hamano5-8/+26
* maint: Git 1.8.2.3 t5004: avoid using tar for checking emptiness of archive t5004: ignore pax global header file mergetools/kdiff3: do not use --auto when diffing transport-helper: trivial style cleanup
2013-05-09Git 1.8.2.3Libravatar Junio C Hamano4-3/+23
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-09Merge branch 'mv/sequencer-pick-error-diag'Libravatar Junio C Hamano1-3/+3
Fix "git cherry-pick $annotated_tag", which was mistakenly rejected. * mv/sequencer-pick-error-diag: cherry-pick: picking a tag that resolves to a commit is OK
2013-05-09cherry-pick: picking a tag that resolves to a commit is OKLibravatar Junio C Hamano1-3/+3
Earlier, 21246dbb9e0a (cherry-pick: make sure all input objects are commits, 2013-04-11) tried to catch an unlikely "git cherry-pick $blob" as an error, but broke a more important use case to cherry-pick a tag that points at a commit. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-09Merge branch 'tr/copy-revisions-from-stdin' into maintLibravatar Junio C Hamano1-1/+2
* tr/copy-revisions-from-stdin: read_revisions_from_stdin: make copies for handle_revision_arg
2013-05-09t5004: avoid using tar for checking emptiness of archiveLibravatar René Scharfe1-3/+2
Test 2 of t5004 checks if a supposedly empty tar archive really contains no files. 24676f02 (t5004: fix issue with empty archive test and bsdtar) removed our commit hash to make it work with bsdtar, but the test still fails on NetBSD and OpenBSD, which use their own tar that considers a tar file containing only NULs as broken. Here's what the different archivers do when asked to create a tar file without entries: $ uname -v NetBSD 6.0.1 (GENERIC) $ gtar --version | head -1 tar (GNU tar) 1.26 $ bsdtar --version bsdtar 2.8.4 - libarchive 2.8.4 $ : >zero.tar $ perl -e 'print "\0" x 10240' >tenk.tar $ sha1 zero.tar tenk.tar SHA1 (zero.tar) = da39a3ee5e6b4b0d3255bfef95601890afd80709 SHA1 (tenk.tar) = 34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c $ : | tar cf - -T - | sha1 da39a3ee5e6b4b0d3255bfef95601890afd80709 $ : | gtar cf - -T - | sha1 34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c $ : | bsdtar cf - -T - | sha1 34e163be8e43c5631d8b92e9c43ab0bf0fa62b9c So NetBSD's native tar creates an empty file, while GNU tar and bsdtar both give us 10KB of NULs -- just like git archive with an empty tree. Now let's see how the archivers handle these two kinds of empty tar files: $ tar tf zero.tar; echo $? tar: Unexpected EOF on archive file 1 $ gtar tf zero.tar; echo $? gtar: This does not look like a tar archive gtar: Exiting with failure status due to previous errors 2 $ bsdtar tf zero.tar; echo $? 0 $ tar tf tenk.tar; echo $? tar: Cannot identify format. Searching... tar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 1 $ gtar tf tenk.tar; echo $? 0 $ bsdtar tf tenk.tar; echo $? 0 NetBSD's tar complains about both, bsdtar happily accepts any of them and GNU tar doesn't like zero-length archive files. So the safest course of action is to stay with our block-of-NULs format which is compatible with GNU tar and bsdtar, as we can't make NetBSD's native tar happy anyway. We can simplify our test, however, by taking tar out of the picture. Instead of extracting the archive and checking for the non-presence of files, check if the file has a size of 10KB and contains only NULs. This makes t5004 pass on NetBSD and OpenBSD. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-09t5004: ignore pax global header fileLibravatar René Scharfe1-1/+1
Versions of tar that don't know pax headers -- like the ones in NetBSD 6 and OpenBSD 5.2 -- extract them as regular files. Explicitly ignore the file created for our global header when checking the list of extracted files, as this is normal and harmless fall-back behaviour. This fixes test 3 of t5004 on these platforms. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-09mergetools/kdiff3: do not use --auto when diffingLibravatar David Aguilar1-1/+1
The `kdiff3 --auto` help message is, "No GUI if all conflicts are auto- solvable." This flag was carried over from the original mergetool commands. diff_cmd() is for two-way comparisons only so remove the superfluous flag. Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-09transport-helper: trivial style cleanupLibravatar Felipe Contreras1-2/+1
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-09git-svn: added an --include-path flagLibravatar Paul Walmsley5-3/+180
The SVN::Fetcher module is now able to filter for inclusion as well as exclusion (as used by --ignore-path). Also added tests, documentation changes and git completion script. If you have an SVN repository with many top level directories and you only want a git-svn clone of some of them then using --ignore-path is difficult as it requires a very long regexp. In this case it's much easier to filter for inclusion. [ew: remove trailing whitespace] Signed-off-by: Paul Walmsley <pjwhams@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2013-05-09Git::SVN::*: add missing "NAME" section to perldocLibravatar Jonathan Nieder4-0/+8
lexgrog(1) relies on the NAME section to find a manpage's subject's name and description for easy access later using "man -k". Add the section it expects. Noticed using lintian. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
2013-05-09git-svn: avoid self-referencing mergeinfoLibravatar Michael Contreras2-4/+8
When svn.pushmergeinfo is set, the target branch is included in the mergeinfo if it was previously merged into one of the source branches. SVN does not do this. Remove merge target branch path from resulting mergeinfo when svn.pushmergeinfo is set to better match the behavior of SVN. Update the svn-mergeinfo-push test. [ew: 80 columns] Signed-off-by: Michael Contreras <michael@inetric.com> Reported-by: Avishay Lavie <avishay.lavie@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
2013-05-07Update draft release notes for 1.8.3Libravatar Junio C Hamano1-2/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-07remote-helpers: trivial cleanupLibravatar Felipe Contreras1-1/+0
The comment was copied from hg-fast-export, not used anymore. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-07remote-bzr: fix for disappeared revisionsLibravatar Felipe Contreras2-4/+49
It's possible that the previous tip goes away, we should not assume it's always present. Fortunately we are only using it to calculate the progress to display to the user, so only that needs to be fixed. Also, add a test that triggers this issue. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-07Merge git://github.com/git-l10n/git-poLibravatar Junio C Hamano5-2669/+3650
* git://github.com/git-l10n/git-po: l10n: zh_CN.po: translate 44 messages (2080t0f0u) l10n: de.po: translate 44 new messages l10n: Update Vietnamese translation (2080t0f0u) l10n: Update Swedish translation (2080t0f0u) l10n: git.pot: v1.8.3 round 2 (44 new, 12 removed)
2013-05-08l10n: zh_CN.po: translate 44 messages (2080t0f0u)Libravatar Jiang Xin1-530/+728
Translate 44 new messages came from git.pot update in c6bc7d4 (l10n: git.pot: v1.8.3 round 2 (44 new, 12 removed)) Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
2013-05-07l10n: de.po: translate 44 new messagesLibravatar Ralf Thielow1-554/+774
Translate 44 new messages came from git.pot update in c6bc7d4 (l10n: git.pot: v1.8.3 round 2 (44 new, 12 removed)). Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Acked-by: Thomas Rast <trast@inf.ethz.ch>
2013-05-06Merge branch 'jk/merge-tree-added-identically'Libravatar Junio C Hamano2-1/+56
* jk/merge-tree-added-identically: merge-tree: handle directory/empty conflict correctly
2013-05-06merge-tree: handle directory/empty conflict correctlyLibravatar John Keeping2-1/+56
git-merge-tree causes a null pointer dereference when a directory entry exists in only one or two of the three trees being compared with no corresponding entry in the other tree(s). When this happens, we want to handle the entry as a directory and not attempt to mark it as a file merge. Do this by setting the entries bit in the directory mask when the entry is missing or when it is a directory, only performing the file comparison when we know that a file entry exists. Reported-by: Andreas Jacobsen <andreas@andreasjacobsen.com> Signed-off-by: John Keeping <john@keeping.me.uk> Tested-by: Andreas Jacobsen <andreas@andreasjacobsen.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-06Merge branch 'fc/remote-bzr'Libravatar Junio C Hamano2-81/+298
* fc/remote-bzr: remote-bzr: avoid bad refs remote-bzr: convert all unicode keys to str remote-bzr: access branches only when needed remote-bzr: delay peer branch usage remote-bzr: iterate revisions properly remote-bzr: improve progress reporting remote-bzr: add option to specify branches remote-bzr: add custom method to find branches remote-bzr: improve author sanitazion remote-bzr: add support for shared repo remote-bzr: fix branch names remote-bzr: add support for bzr repos remote-bzr: use branch variable when appropriate remote-bzr: fix partially pushed merge remote-bzr: fixes for branch diverge remote-bzr: add support to push merges remote-bzr: always try to update the worktree remote-bzr: fix order of locking in CustomTree remote-bzr: delay blob fetching until the very end remote-bzr: cleanup CustomTree
2013-05-06remote-bzr: avoid bad refsLibravatar Felipe Contreras1-15/+23
Versions of fast-export before v1.8.2 throws a bad 'reset' commands because of a behavior in transport-helper that is not even needed. We should ignore them, otherwise we will treat them as branches and fail. This was fixed in v1.8.2, but some people use this script in older versions of git. Also, check if the ref was a tag, and skip it for now. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-06remote-bzr: convert all unicode keys to strLibravatar Felipe Contreras1-2/+2
Otherwise some versions of bazaar might barf. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-05Merge branch 'fc/push-with-export-reporting-result'Libravatar Junio C Hamano2-0/+15
* fc/push-with-export-reporting-result: transport-helper: improve push messages
2013-05-05transport-helper: improve push messagesLibravatar Felipe Contreras2-0/+15
If there's already a remote-helper tracking ref, we can fetch the SHA-1 to report proper push messages (as opposed to always reporting [new branch]). The remote-helper currently can specify the old SHA-1 to avoid this problem, but there's no point in forcing all remote-helpers to be aware of git commit ids; they should be able to be agnostic of them. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-03Git 1.8.3-rc1Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-03Merge branch 'tr/unpack-entry-use-after-free-fix'Libravatar Junio C Hamano1-1/+0
* tr/unpack-entry-use-after-free-fix: unpack_entry: avoid freeing objects in base cache
2013-05-03Sync with maintLibravatar Junio C Hamano2-3/+3
* maint: completion: zsh: don't override suffix on _detault Documentation/git-commit: Typo under --edit
2013-05-03Merge branch 'tr/remote-tighten-commandline-parsing' into maintLibravatar Junio C Hamano3-3/+25
* tr/remote-tighten-commandline-parsing: remote: 'show' and 'prune' can take more than one remote remote: check for superfluous arguments in 'git remote add' remote: add a test for extra arguments, according to docs
2013-05-03Merge branch 'jn/glossary-revision' into maintLibravatar Junio C Hamano1-3/+1
* jn/glossary-revision: glossary: a revision is just a commit
2013-05-03completion: zsh: don't override suffix on _detaultLibravatar Felipe Contreras1-1/+1
zsh is smart enough to add the right suffix while completing, there's no point in trying to do the same as bash. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-02Documentation/git-commit: Typo under --editLibravatar Anders Granskogen Bjørnstad1-2/+2
-C takes a commit object, not a file. Signed-off-by: Anders Granskogen Bjørnstad <andersgb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-01Update draft release notes to 1.8.3Libravatar Junio C Hamano1-3/+16
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-01Fix grammar in the 1.8.3 release notes.Libravatar Marc Branchaud1-78/+77
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-01Merge branch 'hb/git-pm-tempfile'Libravatar Junio C Hamano1-1/+1
* hb/git-pm-tempfile: Git.pm: call tempfile from File::Temp as a regular function
2013-05-01Merge branch 'rs/pp-user-info-without-extra-allocation'Libravatar Junio C Hamano1-35/+14
* rs/pp-user-info-without-extra-allocation: pretty: remove intermediate strbufs from pp_user_info() pretty: simplify output line length calculation in pp_user_info() pretty: simplify input line length calculation in pp_user_info()
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 09:26:30 +0000