| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We said that some of our dependencies were optional, but didn't say
how to turn them off. Add information for that and mention where to
save the options close to the top of the file.
Also, standardize on both using quotes for the names of the dependencies
and tabs for indentation of the list.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The most important and non-optional dependencies should go first, so put
them there. While we're moving them, the descriptions for shell and perl
were archaic, referring to "bare-bones Porcelainish scripts" that have
become powerful and essential.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The popen2, sha and sets modules are deprecated in Python 2.6 (sha in
Python 2.5). Both popen2 and sha are not actually used in git-p4.
Replace usage of sets.Set with the builtin set object.
The built-in set object was added in Python 2.4 and is already used in
other parts of this script, so this dependency is nothing new.
Signed-off-by: Reilly Grant <reillyeon@qotw.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Makefile comment for NEEDS_SSL_WITH_CRYPTO says to define it "if
you need -lcrypto with -lssl (Darwin)." However, what it actually
does is add -lssl when you use -lcrypto and not the other way around.
However, libcrypto contains a majority of the ERR_* functions from
OpenSSL (at least on OS X) so we need it both ways.
So, add NEEDS_CRYPTO_WITH_SSL which adds -lcrypto to the OpenSSL link
flags and clarify the difference between it and NEEDS_SSL_WITH_CRYPTO.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use `git-add-file' to mark unmerged files as resolved in the
*git-status* buffer to be consistent with git's CLI instructions. Also
remove `git-resolve-file' to make it clear that that "R" is a now a
free keybinding.
Signed-off-by: Martin Nordholts <martinn@src.gnome.org>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We haven't had Mozilla's code or an ARM optimized algorithm since
30ae47b. Reword the paragraph to give credit but not authorship to
Mozilla.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-pull: do not mention --quiet and --verbose twice
githooks.txt: put hooks into subsections
|
|
git-pull.txt includes fetch-options.txt and merge-options.txt, both of
which document the --quiet and --verbose.
Supress the ones from fetch-options.txt.
Signed-off-by: Emmanuel Trillaud <etrillaud@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All hooks are currently in its own section. Which may confuse users,
because the section name serves as the hook file name and sections are
all caps for man pages. Putting them into a new HOOKS section and each
hook into a subsection keeps the case to lower case.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/mailinfo-scissors:
mailinfo.scissors: new configuration
am/mailinfo: Disable scissors processing by default
Documentation: describe the scissors mark support of "git am"
Teach mailinfo to ignore everything before -- >8 -- mark
builtin-mailinfo.c: fix confusing internal API to mailinfo()
|
|
* jk/clone-b:
clone: add --branch option to select a different HEAD
|
|
* jc/upload-pack-hook:
upload-pack: feed "kind [clone|fetch]" to post-upload-pack hook
upload-pack: add a trigger for post-upload-pack hook
|
|
* tr/reset-checkout-patch:
stash: simplify defaulting to "save" and reject unknown options
Make test case number unique
tests: disable interactive hunk selection tests if perl is not available
DWIM 'git stash save -p' for 'git stash -p'
Implement 'git stash save --patch'
Implement 'git checkout --patch'
Implement 'git reset --patch'
builtin-add: refactor the meat of interactive_add()
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
Make 'git stash -k' a short form for 'git stash save --keep-index'
|
|
* np/maint-1.6.3-deepen:
pack-objects: free preferred base memory after usage
make shallow repository deepening more network efficient
|
|
* maint:
push: re-flow non-fast-forward message
push: fix english in non-fast-forward message
|
|
The extreme raggedness of the right edge make this jarring
to read. Let's re-flow the text to fill the lines in a more
even way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We must use an article when referring to the section
because it is a non-proper noun, and it must be the definite
article because we are referring to a specific section.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Passwords stored in .cvspass are already scrambled, we do not
want to scramble them twice. Only passwords read from the
command line are scrambled.
This fixes a regression introduced by b2139db (git-cvsimport: add support
for cvs pserver password scrambling., 2009-08-14).
Signed-off-by: Pascal Obry <pascal@obry.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When adding objects for preferred delta base, the content from tree
objects leading to given paths is kept in a cache. This has the
potential to grow significantly, especially with large directories as
the whole tree object content is loaded in memory, even if in practice
the number of those objects is limited to the 256 cache entries plus the
$window root tree objects. Still, that can't hurt freeing that up after
object enumeration is done, and before more memory is needed for delta
search.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
First of all, I can't find any reason why thin pack generation is
explicitly disabled when dealing with a shallow repository. The
possible delta base objects are collected from the edge commits which
are always obtained through history walking with the same shallow refs
as the client, Therefore the client is always going to have those base
objects available. So let's remove that restriction.
Then we can make shallow repository deepening much more efficient by
using the remote's unshallowed commits as edge commits to get preferred
base objects for thin pack generation. On git.git, this makes the data
transfer for the deepening of a shallow repository from depth 1 to depth 2
around 134 KB instead of 3.68 MB.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-clone: add missing comma in --reference documentation
|
|
* maint-1.6.3:
git-clone: add missing comma in --reference documentation
git-cvsserver: no longer use deprecated 'git-subcommand' commands
clone: disconnect transport after fetching
|
|
* maint-1.6.2:
git-clone: add missing comma in --reference documentation
clone: disconnect transport after fetching
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-cvsserver: no longer use deprecated 'git-subcommand' commands
clone: disconnect transport after fetching
|
|
* maint-1.6.3:
git-cvsserver: no longer use deprecated 'git-subcommand' commands
clone: disconnect transport after fetching
|
|
This should have been part of 481c7a6, whose goal was to
make "git push -q" silent unless there is an error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.2:
clone: disconnect transport after fetching
|
|
git-cvsserver still references git commands like 'git-config', which
is depcrecated. This commit changes git-cvsserver to use the
'git subcommand' form.
Sylvain Beucler reported the problem through
http://bugs.debian.org/536067
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current code just leaves the transport in whatever state
it was in after performing the fetch. For a non-empty clone
over the git protocol, the transport code already
disconnects at the end of the fetch.
But for an empty clone, we leave the connection hanging, and
eventually close the socket when clone exits. This causes
the remote upload-pack to complain "the remote end hung up
unexpectedly". While this message is harmless to the clone
itself, it is unnecessarily scary for a user to see and may
pollute git-daemon logs.
This patch just explicitly calls disconnect after we are
done with the remote end, which sends a flush packet to
upload-pack and cleanly disconnects, avoiding the error
message.
Other transports are unaffected or slightly improved:
- for a non-empty repo over the git protocol, the second
disconnect is a no-op (since we are no longer connected)
- for "walker" transports (like HTTP or FTP), we actually
free some used memory (which previously just sat until
the clone process exits)
- for "rsync", disconnect is always a no-op anyway
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When resolving a conflicted merge, two lists in the status output need
more attention from the user than other parts.
- the list of updated paths is useful to review the amount of changes the
merge brings in (the user cannot do much about them other than
reviewing, though); and
- the list of unmerged paths needs the most attention from the user; the
user needs to resolve them in order to proceed.
Since the output of git status does not by default go through the pager,
the early parts of the output can scroll away at the top. It is better to
put the more important information near the bottom. During a merge, local
changes that are not in the index are minimum, and you should keep the
untracked list small in any case, so moving the unmerged list from the top
of the output to immediately after the list of updated paths would give us
the optimum layout.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the earlier DWIM patches, certain combination of options defaulted
to the "save" command correctly while certain equally valid combination
did not. For example, "git stash -k" were Ok but "git stash -q -k" did
not work.
This makes the logic of defaulting to "save" much simpler. If there are no
non-flag arguments, it is clear that there is no command word, and we
default to "save" subcommand. This rule prevents "git stash -q apply"
from quietly creating a stash with "apply" as the message.
This also teaches "git stash save" to reject an unknown option. This is
to keep a mistyped "git stash save --quite" from creating a stash with a
message "--quite", and this safety is more important with the new logic
to default to "save" with any option-looking argument without an explicit
comand word.
[jc: this is based on Matthieu's 3-patch series, and a follow-up
discussion, and he and Peff take all the credit; if I have introduced bugs
while reworking, they are mine.]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of allocating a temporary array imglen[], copying contents to it
from another array img->line[], and then using imglen[], use the value
from img->line[], whose value does not change during the whole process.
This incidentally removes a use of C99 variable length array, which some
older compilers apparently are not happy with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is one of only two places that we use C99 variable length array on
the stack, which some older compilers apparently are not happy with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The majority of code in core git appears to use a single
space after if/for/while. This is an attempt to bring more
code to this standard. These are entirely cosmetic changes.
Signed-off-by: Brian Gianforcaro <b.gianfo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lt/approxidate:
fix approxidate parsing of relative months and years
tests: add date printing and parsing tests
refactor test-date interface
Add date formatting and parsing functions relative to a given time
Further 'approxidate' improvements
Improve on 'approxidate'
Conflicts:
date.c
|
|
* mr/gitweb-snapshot:
gitweb: add t9501 tests for checking HTTP status codes
gitweb: split test suite into library and tests
gitweb: improve snapshot error handling
|
|
* tf/diff-whitespace-incomplete-line:
xutils: Fix xdl_recmatch() on incomplete lines
xutils: Fix hashing an incomplete line with whitespaces at the end
|
|
These were broken by b5373e9. The problem is that the code
marks the month and year with "-1" for "we don't know it
yet", but the month and year code paths were not adjusted to
fill in the current time before doing their calculations
(whereas other units follow a different code path and are
fine).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Until now, there was no coverage of relative date printing
or approxidate parsing routines (mainly because we had no
way of faking the "now" time for relative date calculations,
which made consistent testing impossible).
This new script tries to exercise the basic features of
show_date and approxidate. Most of the tests are just "this
obvious thing works" to prevent future regressions, with a
few exceptions:
- We confirm the fix in 607a9e8 that relative year/month
dates in the latter half of a year round correctly.
- We confirm that the improvements in b5373e9 and 1bddb25
work.
- A few tests are marked to expect failure, which are
regressions recently introduced by the two commits
above.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test-date program goes back to the early days of git,
where it was presumably used to do manual sanity checks on
changes to the date code. However, it is not actually used
by the test suite to do any sort of automatic of systematic
tests.
This patch refactors the interface to the program to try to
make it more suitable for use by the test suite. There
should be no fallouts to changing the interface since it is
not actually installed and is not internally called by any
other programs.
The changes are:
- add a "mode" parameter so the caller can specify which
operation to test
- add a mode to test relative date output from show_date
- allow faking a fixed time via the TEST_DATE_NOW
environment variable, which allows consistent automated
testing
- drop the use of ctime for showing dates in favor of our
internal iso8601 printing routines. The ctime output is
somewhat redundant (because of the day-of-week) which
makes writing test cases more annoying.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The main purpose is to allow predictable testing of the code.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git branch, checkout, clean, mv and tag all have an option -f to override
certain checks. This patch makes them accept the long option --force as
a synonym.
While we're at it, document that checkout support --quiet as synonym for
its short option -q.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert git update-server-info to a built-in command and use parseopt.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This file is no longer used since 54bc13c (t8005: Nobody writes Russian in
shift_jis, 2009-06-18).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A request to clone the repository does not give any "have" but asks for
all the refs we offer with "want". When a request does not ask to clone
the repository fully, but asks to fetch some refs into an empty
repository, it will not give any "have" but its "want" won't ask for all
the refs we offer.
If we suppose (and I would say this is a rather big if) that it makes
sense to distinguish these two cases, a hook cannot reliably do this
alone. The hook can detect lack of "have" and bunch of "want", but there
is no direct way to tell if the other end asked for all refs we offered,
or merely most of them.
Between the time we talked with the other end and the time the hook got
called, we may have acquired more refs or lost some refs in the repository
by concurrent operations. Given that we plan to introduce selective
advertisement of refs with a protocol extension, it would become even more
difficult for hooks to guess between these two cases.
This adds "kind [clone|fetch]" to hook's input, as a stable interface to
allow the hooks to tell these cases apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After upload-pack successfully finishes its operation, post-upload-pack
hook can be called for logging purposes.
The hook is passed various pieces of information, one per line, from its
standard input. Currently the following items can be fed to the hook, but
more types of information may be added in the future:
want SHA-1::
40-byte hexadecimal object name the client asked to include in the
resulting pack. Can occur one or more times in the input.
have SHA-1::
40-byte hexadecimal object name the client asked to exclude from
the resulting pack, claiming to have them already. Can occur zero
or more times in the input.
time float::
Number of seconds spent for creating the packfile.
size decimal::
Size of the resulting packfile in bytes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Brian Gernhardt
Reilly Grant
Martin Nordholts
Junio C Hamano
Emmanuel Trillaud
Bert Wesarg
Jeff King
Pascal Obry
Nicolas Pitre
Miklos Vajna
Gerrit Pape
Johannes Sixt
Matthieu Moy
Brian Gianforcaro
Alex Riesen
René Scharfe
Nanako Shiraishi