| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
The wrapper adds the directory it is installed in to PATH.
This is required for the git commands implemented in shell.
git-gui fails to launch them if PATH is not modified.
The wrapper script also accepts an optional command line
switch '--working-dir <dir>' and changes to <dir> before
launching the actual git-gui. This is required to implement
the "Git Gui Here" Explorer shell extension.
As a last step the original git-gui script is launched,
which is expected to be located in the same directory
under the name git-gui.tcl.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Shawn's git-gui Makefile supports the pure tcl replacement
for msgfmt if setting NO_MSGFMT. This patch sets the NO_MSGFMT
for msysgit.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This commit modifies PATH to include a good guess where git
could be found. The first location to search for executable is
the directory git-gui is installed in. This is a good guess for
a sane installation.
Even if git is not available in PATH, git-gui is now able
to find it. Hence git-gui can be passed to wish as an absolute
path without caring about the environment.
We must modify PATH to be able to spawn shell based git commands.
For builtins it would be sufficient to located them and execute
them with their absolute path. But for shell based git commmands
PATH needs to be modified.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* cs/de:
git-gui: Update German translation, including latest glossary changes
git-gui: Incorporate glossary changes into existing German translation
git-gui: Update German glossary according to mailing list discussion
git-gui: Add more words to translation glossary
|
|
|
|
|
|
|
|
|
|
The titles for the staged and unstaged areas were usually opening
up too narrow by default, causing the text to be clipped by Tcl as
it tried to center the text in the middle of the available area.
This meant that users who were new to git-gui did not get to see
the entire header and may be unclear about what the different lists
are.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
A Mac OS X UI convention is to have Cmd-, be the accelerator key
for the preferences window, which by convention is located in the
apple menu under a separator below the about command. We also now
call this "Preferences..." as that is the conventional term used
in English.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Sometimes the Fetch menu looks really odd, such as if you are in a
repository that has no remotes configured when you start git-gui.
Here we didn't have any items to add to the Fetch menu so it was a
tad confusing for the end-user to see an empty menu on the menu bar.
We now place all of the commands related to fetching and pushing of
changes into a single "Remote" menu. This way we have a better class
of bucket that we can drop additional remote related items into such
as doing a remote merge or editing the remote configuration specs.
The shortcuts to execute fetch/remote prune/push on existing remote
specifications are now actually submenus listing the remotes by name.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we are updating the index to stage or unstage changes or reverting
files in the working directory we can use the progress handling parts
of our status bar to perform this display work, reducing the amount of
code duplication we have in the index handling module.
Unfortunately the status bar is still a strict approximation as it is
unable to know when git-update-index has processed the data we fed to
it. The progress bar is actually a progress of the pipe buffer filling
up in the OS, not of the actual work done. Still, it tells the user we
are working and that has some value.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Most applications tend to have some sort of pretty image in the
about dialog, because it spruces the screen up a little bit and
makes the user happy about reading the information shown there.
We already have a logo in the repository selection wizard so we
can easily reuse this in the about dialog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The about dialog is getting somewhat long in size and will probably
only get more complex as I try to improve upon its display. As the
options dialog is even more complex than the about dialog we move
the about dialog into its own module to reduce the complexity of the
option dialog module.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
By moving the logo into its own procedure we can use it in
multiple locations within the UI, but still load it only if
the logo is going to be used by the application.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
|
|
This commit teaches git-gui to accept versions with annotations
that start with text and optionally end with a dot followed by
a number.
This is needed by the current versioning scheme of msysgit,
which uses versions like 1.5.3.mingw.1. However, the changes
is not limited to this use case. Any version of the form
<numeric version>.<anytext>.<number> would be parsed and only
the starting <numeric version> used for validation.
[sp: Minor edit to remove unnecessary group matching]
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Some workflows allow the user to forcefully update a remote branch,
such as in a "proposed updates" (aka "pu") branch where the branch
is rewound and rebuilt on a daily basis against the current master
branch. In such a case the "--force" or leading + must be used to
make git-push execute anyway, even though it may be discarding one
or more commits on the remote side.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: Don't crash when starting gitk from a browser session
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
Conflicts:
git-gui.sh
|
|
If the user has started git-gui from the command line as a browser
we offer the gitk menu options but we didn't create the main status
bar widget in the "." toplevel. Trying to access it while starting
gitk just results in Tcl errors.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
gitk expects $env(GIT_DIR) to be valid as both a path that core Git
and Tcl/Tk can resolve to a valid directory, but it has no special
handling for Cygwin style UNIX paths and Windows style paths. So
we need to do that for gitk and ensure that only relative paths are
fed to it, thus allowing both Cygwin style and UNIX style paths to
be resolved.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
When displaying the name of the application in window titles
and menu options (e.g. "About [appname]") we would prefer to
call ourselves "Git Gui" over "git-gui" as the former name is
now being actively used in the Mac OS X UI strings and just
plain looks better to the reader.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we are building on Darwin (sometimes known as Mac OS X) and we
find the Mac OS X Tk.framework in the expected location we build
a proper Mac OS X application bundle with icons and info list. The
git-gui and git-citool commands are modified to be very short shell
scripts that just execute the application bundle, starting Tk with
our own info list and icon set.
Although the Makefile change here is rather large it makes for a
much more pleasant user experience on Mac OS X as git-gui now has
its own icon on the dock, in the standard tk_messageBox dialogs,
and the application name now says "Git Gui" instead of "Wish" in
locations such as the menu bar and the alt-tab window.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Rather than displaying the stock red "Tk" icon in our window
title bars and on the task bar we now show a Git specific logo.
This is Henrik Nyh's logo that we also use in the startup wizard,
scaled to a 16x16 image for Windows task bar usage with a proper
transparent background.
Signed-off-by: Shawn O. Pearce <shawn.o.pearce@bankofamerica.com>
|
|
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The setup wizard looks better if we layout the progress bar as
two lines: the first line holds the message text and our text
formatting of the progress while the second line holds the bar
itself. Both extend the full width of the window and we try to
pad out the message text so the window doesn't expand when the
completed progress number jumps to the next order of magnitude.
This change required updating the progress meter format string
to allow the application to supply the precision. So we also
are updating all of the translations at once to use the newer
formatting string.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Henrik came up with this alternative logo for gitweb and posted
it on his blog:
http://henrik.nyh.se/2007/06/alternative-git-logo-and-favicon
The msysGit port uses his logo within some of their components,
and frankly it looks better here in git-gui for our repository
setup wizard screen. The logo fits quite nicely along the left
edge of our window, leaving significantly more vertical space
for things like the git-fetch console output.
Because the logo changes the layout charateristics of the setup
window I also needed to adjust some of the padding for our widgets
and stop using a fixed width window size. We now let Tk compute
the correct size of the main window whenever the layout changes,
and drop the window into roughly the upper left 1/3 of the desktop
so its not quite centered but is likely to be far enough away from
any sort of task bars/menu bars/docks that the user may have along
any edge of the screen.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we have added a scrollbar to the console window because one
direction has too much text to fit in the available screen space
we should just keep the scrollbars. Its annoying to watch our
horizontal scrollbar bounce in and out of the window as additional
text is inserted into the widget and the need for the scrollbar
comes and goes.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If the console finishes displaying its output and is "done" but
needs to draw a scrollbar to show the final output messages it
is possible for Tk to delete the window namespace before it does
the text widget updates, which means we are unable to add the
horizontal or vertical scrollbar to the window when the text
widget decides it cannot draw all glyphs on screen.
We need to delay deleting the window namespace until we know
the window is not going to ever be used again. This occurs if
we are done receiving output, the command is successful and the
window is closed, or if the window is open and the user chooses
to close the window after the command has completed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The program "msgfmt" was our only dependency on gettext. Since it
is more than just a hassle to compile gettext on MinGW, here is a
(very simple) drop-in replacement, which Works For Us.
[sp: Changed Makefile to enable/disable po2msg.sh by the new
NO_MSGFMT variable.]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If the source repository is using an objects/info/alternates file
we need to copy the file to our new repository so that it can access
any objects that won't be copied/hardlinked as they are stored in the
alternate location.
We explicitly resolve all paths in the objects/info/alternates as
relative to the source repository but then convert them into an
absolute path for the new clone. This allows the new clone to
access the exact same locaton as the source repository, even if
relative paths had been used before.
Under Cygwin we assume that Git is Cygwin based and that the paths
in objects/info/alternates must be valid Cygwin UNIX paths, so we
need to run `cygpath --unix` on each line in the alternate list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we are doing a "standard" clone by way of hardlinking the
objects (or copying them if hardlinks are not available) the
UI can freeze up for a good few seconds while Tcl scans all
of the object directories. This is espeically noticed on a
Windows system when you are working off network shares and
need to wait for both the NT overheads and the network.
We now show a progress bar as we count the objects and build
our list of things to copy. This keeps the user amused and
also makes sure we run the Tk event loop often enough that
the window can still be dragged around the desktop.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we failed to create our test hardlink for the first object
we need to link/copy then the only recourse we have is to make
a copy of the objects. Users don't really need to know the OS
details about why the hardlink failed as its usually because
they are crossing filesystem boundaries.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
We shouldn't create scrollbars for the horziontal or vertical sides
unless there is enough content to make it worth drawing these widgets
on screen. This way users don't loose screen space to objects that
won't help them navigate the display.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we are started outside of a git repository than it is likely
the user started us from some sort of desktop shortcut icon in
the operating system. In such a case the user is expecting us to
prompt them to locate the git repository they want to work on,
or to help them make a new repository, or to clone one from an
existing location. This is a very simple wizard that offers the
user one of these three choices.
When we clone a repository we always use the name `master` in the
local repository, even if the remote side does not appear to point
to that name. I chose this as a policy decision. Much of the Git
documentation talks about `master` being the default branch in a
repository and that's what git-init does too. If the remote side
doesn't call its default branch `master` most users just don't care,
they just want to use Git the way the documentation describes.
Rather than relying on the git-clone Porcelain that ships with
git we build the new repository ourselves and then obtain content
by git-fetch. This technique simplifies the entire clone process
to roughly: `git init && git fetch && git pull`. Today we use
three passes with git-fetch; the first pass gets us the bulk of
the objects and the branches, the second pass gets us the tags,
and the final pass gets us the current value of HEAD to initialize
the default branch.
If the source repository is on the local disk we try to use a
hardlink to connect the objects into the new clone as this can
be many times faster than copying the objects or packing them and
passing the data through a pipe to index-pack. Unlike git-clone
we stick to pure Tcl [file link -hard] operation thus avoiding the
need to fork a cpio process to setup the hardlinks. If hardlinks
do not appear to be supported (e.g. filesystem doesn't allow them or
we are crossing filesystem boundaries) we use file copying instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I'm starting to setup a main window that the user can use to
locate an existing repository, clone an existing repository,
or create a new repository from scratch. To help do that I
want most of our common UI support already defined before we
start to look for the Git repository, this way if it was not
found we can open a window to help the user locate it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
Conflicts:
git-gui.sh
|
|
If we are using Cygwin and the git repository is actually a
workdir (by way of git-new-workdir) but this Tcl process is
a native Tcl/Tk and not the Cygwin Tcl/Tk then we are unable
to traverse the .git/info path as it is a Cygwin symlink and
not a standard Windows directory.
So we actually need to start a Cygwin process that can do the
path translation for us and let it test for .git/info/exclude
so we know if we can include that file in our git-ls-files or
not.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I really cannot explain Cygwin's behavior here but if we start
git-gui through Cygwin on a local drive it appears that Cygwin
is leaving $env(PATH) in Unix style, even if it started a native
(non-Cygwin) Tcl/Tk process to run git-gui. Yet starting that
same git-gui and Tcl/Tk combination through Cygwin on a network
share causes it to automatically convert $env(PATH) into Windows
style, which broke our internal "which" implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we cannot find the git executable in the user's $PATH then
we cannot function correctly. Because we need that to get the
version so we can load our library correctly we cannot rely on
the library function "error_popup" here, as this is all running
before the library path has been configured, so error_popup is
not available to us.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Cygwin has been stuck on the 8.4.1 version of Tcl/Tk for quite some
time, even though the main Tcl/Tk distribution is already shipping
an 8.4.15. The problem is Tcl/Tk no longer supports Cygwin so
apparently building the package for Cygwin is now a non-trivial task.
Its actually quite easy to build the native Win32 version of Tcl/Tk
by compiling with the -mno-cygwin flag passed to GCC but this means
we lose all of the "fancy" Cygwin path translations that the Tcl
library was doing for us. This is particularly an issue when we
are trying to start git-gui through the git wrapper as the git
wrapper is passing off a Cygwin path for $0 and Tcl cannot find
the startup script or the library directory.
We now use `cygpath -m -a` to convert the UNIX style paths to Windows
style paths in our startup script if we are building on Cygwin.
Doing so allows either the Cygwin-ized Tcl/Tk 8.4.1 that comes with
Cygwin or a manually built 8.4.15 that is running the pure Win32
implementation to read our script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The console window titles should also be marked up with i18n strings so
these can be properly localized.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: Avoid using bold text in entire gui for some fonts
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: Disable native platform text selection in "lists"
Conflicts:
lib/browser.tcl
|
|
Sometimes we use a Tk text widget as though it were a listbox.
This happens typically when we want to show an icon to the left
of the text label or just when a text widget is generally a better
choice then the native listbox widget.
In these cases if we want the user to have control over the selection
we implement our own "in_sel" tag that shows the selected region
and we perform our own selection management in the background
via keybindings and mouse bindings. In such uses we don't want
the user to be able to activate the native platform selection by
dragging their mouse through the text widget. Doing so creates a
very confusing display and the user is left wondering what it may
mean to have two different types of selection in the same widget.
Tk doesn't allow us to delete the "sel" tag that it uses internally
to manage the native selection but it will allow us to make it
invisible by setting the tag to have the same display properties
as unselected text. So long as we don't actually use the "sel"
tag for anything in code its effectively invisible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The Tcl expression "[append [mc Foo] Bar]" does not return the string
"FooBar" after translation; instead it is setting the variable Foo to
the value Bar, or if Foo is already defined it is appending Bar onto
the end of it. This is *not* what we wanted to have happen here.
Tcl's join function is actually the correct function but its default
joinStr argument is a single space. Unfortunately all of our call
sites do not want an extra space added to their string. So we need
a small wrapper function to make the call to join with an empty
join string. In C this is (roughly) the job of the strcat function.
Since strcat is not yet used at the global level it is a reasonable
name to use here.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
In 9adccb05 Matthijs Melchior changed our selection colors in the
main index/working directory file lists to use a lightgray as the
background color as this made the UI easier to read on all platforms.
When we did that change we missed doing also doing in the file
browser UI. Doing so just makes the entire thing UI consistent.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
Shawn O. Pearce
Steffen Prohaska
Christian Stimming
Michele Ballabio
Johannes Schindelin
Simon Sasburg