summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-03-02git-svn: Support retrieving passwords with GIT_ASKPASSLibravatar Frank Li1-10/+17
git-svn reads passwords from an interactive terminal. This behavior cause GUIs to hang waiting for git-svn to complete Fix this problem by allowing a password-retrieving command to be specified in GIT_ASKPASS. SSH_ASKPASS is supported as a fallback when GIT_ASKPASS is not provided. Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02fallback SSH_ASKPASS when GIT_ASKPASS not setLibravatar Frank Li1-0/+3
If GIT_ASKPASS is not set and SSH_ASKPASS set, GIT_ASKPASS will use SSH_ASKPASS. Signed-off-by: Frank Li <lznuaa@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-01Merge branch 'cc/maint-bisect-paths'Libravatar Junio C Hamano2-0/+11
* cc/maint-bisect-paths: bisect: error out when passing bad path parameters
2010-03-01bisect: error out when passing bad path parametersLibravatar Christian Couder2-0/+11
As reported by Mark Lodato, "git bisect", when it was started with path parameters that match no commit was kind of working without taking account of path parameters and was reporting something like: Bisecting: -1 revisions left to test after this (roughly 0 steps) It is more correct and safer to just error out in this case, before displaying the revisions left, so this patch does just that. Note that this bug is very old, it exists at least since v1.5.5. And it is possible to detect that case earlier in the bisect algorithm, but it is not clear that it would be an improvement to error out earlier, on the contrary it may change the behavior of "git rev-list --bisect-all" for example, which is currently correct. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-28Merge branch 'maint'Libravatar Junio C Hamano5-24/+31
* maint: Git 1.7.0.1 Remove reference to GREP_COLORS from documentation sha1_name: fix segfault caused by invalid index access
2010-02-28Git 1.7.0.1Libravatar Junio C Hamano3-7/+12
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-28Remove reference to GREP_COLORS from documentationLibravatar Mark Lodato1-3/+1
There is no longer support for external grep, as per bbc09c2 (grep: rip out support for external grep, 2010-01-12), so remove the reference to it from the documentation. Signed-off-by: Mark Lodato <lodatom@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-28sha1_name: fix segfault caused by invalid index accessLibravatar Markus Heidelberg1-14/+18
The code to see if user input "git show :path" makes sense tried to access the index without properly checking the array bound. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-26git svn: delay importing SVN::Base until it is neededLibravatar josh robb1-5/+11
Importing functions from a .dll into Git for Windows' perl is pretty slow, so let's avoid importing if it is not necessary. This seems particularly slow in virtualized enviroments. Before this change (on my machine): $ time perl /libexec/git-core/git-svn rebase Current branch master is up to date. real 2m56.750s user 0m3.129s sys 2m39.232s Afterwards: $ time perl /libexec/git-core/git-svn rebase Current branch master is up to date. real 0m33.407s user 0m1.409s sys 0m23.054s git svn rebase -n goes from 3m7.046s to 0m10.312s. Signed-off-by: Josh Robb <josh_robb@fastmail.fm> Acked-by: Eric Wong <normalperson@yhbt.net>
2010-02-26git-svn: Fix discarding of extra parents from svn:mergeinfoLibravatar Tuomas Suutari2-2/+2
If parent J is an ancestor of parent I, then parent J should be discarded, not I. Note that J is an ancestor of I if and only if rev-list I..J is emtpy, which is what we are testing here. Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
2010-02-26t9151: Add two new svn:mergeinfo test casesLibravatar Tuomas Suutari3-53/+581
When svn:mergeinfo contains two new parents in a specific order and one is ancestor of the other, it is possible that git-svn discards the wrong one. The first test case ("commit made to merged branch is reachable from the merge") proves this. The second test case ("merging two branches in one commit is detected correctly") is just for completeness, since there was no test for merging two (feature) branches to trunk in one commit. Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
2010-02-26t9151: Fix a few commits in the SVN dumpLibravatar Tuomas Suutari2-38/+74
A few "svn cp" commands and commit commands were executed in incorrect order. Therefore some of the desired commits were missing and some were committed with wrong revision number in the commit message. This made it hard to compare the produced git repository with the SVN repository. The dump file is updated too, but only the relevant parts and with hand-edited timestamps to make history linear. Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
2010-02-25Merge branch 'maint'Libravatar Junio C Hamano1-0/+1
* maint: t3301-notes: insert a shbang line in ./fake_editor.sh
2010-02-25Merge branch 'maint-1.6.6' into maintLibravatar Junio C Hamano1-0/+1
* maint-1.6.6: t3301-notes: insert a shbang line in ./fake_editor.sh
2010-02-25Windows: redirect f[re]open("/dev/null") to f[re]open("nul")Libravatar Johannes Sixt4-0/+33
On Windows, the equivalent of "/dev/null" is "nul". This implements compatibility wrappers around fopen() and freopen() that check for this particular file name. The new tests exercise code paths where this is relevant. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-25t3301-notes: insert a shbang line in ./fake_editor.shLibravatar Johannes Sixt1-0/+1
This is required on Windows because git-notes is now a built-in rather than a shell script. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-24Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: commit: quote the user name in the example
2010-02-24commit: quote the user name in the exampleLibravatar Matt Kraai1-1/+1
If the user runs git config --global user.name Your Name as suggested, user.name will be set to "Your". With this patch, the suggested command will be git config --global user.name "Your Name" which will set user.name to "Your Name" and hopefully help users avoid the former mistake. Signed-off-by: Matt Kraai <kraai@ftbfs.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-24Merge branch 'ml/maint-grep-doc' into maintLibravatar Junio C Hamano1-5/+12
* ml/maint-grep-doc: grep documentation: clarify what files match
2010-02-23Merge branch 'maint'Libravatar Junio C Hamano3-6/+9
* maint: am: remove rebase-apply directory before gc rerere: fix memory leak if rerere images can't be read Documentation: mention conflict marker size argument (%L) for merge driver
2010-02-23am: remove rebase-apply directory before gcLibravatar Jonathan Nieder1-2/+1
When git am does an automatic gc it doesn't clean up the rebase-apply directory until after this has finished. This means that if the user aborts the gc then future am or rebase operations will report that an existing operation is in progress, which is undesirable and confusing. Reported by Mark Brown <broonie@debian.org> through http://bugs.debian.org/570966 Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-23rerere: fix memory leak if rerere images can't be readLibravatar Bert Wesarg1-3/+6
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-23Documentation: mention conflict marker size argument (%L) for merge driverLibravatar Bert Wesarg1-1/+2
23a64c9e (conflict-marker-size: new attribute, 2010-01-16) introduced the new attribute and also pass the conflict marker size as %L to merge driver commands. This documents the substitution. Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-21Merge branch 'ml/maint-grep-doc'Libravatar Junio C Hamano1-5/+12
* ml/maint-grep-doc: grep documentation: clarify what files match
2010-02-21Merge branch 'tc/maint-transport-ls-remote-with-void'Libravatar Junio C Hamano2-1/+10
* tc/maint-transport-ls-remote-with-void: transport: add got_remote_refs flag
2010-02-21Merge branch 'hm/maint-imap-send-crlf'Libravatar Junio C Hamano1-1/+39
* hm/maint-imap-send-crlf: git-imap-send: Convert LF to CRLF before storing patch to draft box
2010-02-21Merge branch 'sp/push-sideband'Libravatar Junio C Hamano10-134/+370
* sp/push-sideband: receive-pack: Send internal errors over side-band #2 t5401: Use a bare repository for the remote peer receive-pack: Send hook output over side band #2 receive-pack: Wrap status reports inside side-band-64k receive-pack: Refactor how capabilities are shown to the client send-pack: demultiplex a sideband stream with status data run-command: support custom fd-set in async run-command: Allow stderr to be a caller supplied pipe
2010-02-21Merge branch 'jc/checkout-detached'Libravatar Junio C Hamano5-12/+46
* jc/checkout-detached: Reword "detached HEAD" notification
2010-02-21Merge branch 'jc/maint-fix-test-perm'Libravatar Junio C Hamano2-0/+4
* jc/maint-fix-test-perm: lib-patch-mode.sh: Fix permission t6000lib: Fix permission
2010-02-21Merge branch 'jn/makefile-script-lib'Libravatar Junio C Hamano3-14/+28
* jn/makefile-script-lib: Do not install shell libraries executable
2010-02-21Merge branch 'mv/request-pull-modernize'Libravatar Junio C Hamano1-4/+4
* mv/request-pull-modernize: request-pull: avoid mentioning that the start point is a single commit
2010-02-20Merge branch 'maint'Libravatar Junio C Hamano3-14/+13
* maint: git-p4: fix bug in symlink handling t1450: fix testcases that were wrongly expecting failure Documentation: Fix indentation problem in git-commit(1)
2010-02-20git-p4: fix bug in symlink handlingLibravatar Evan Powers1-3/+2
Fix inadvertent breakage from b932705 (git-p4: stream from perforce to speed up clones, 2009-07-30) in the code that strips the trailing '\n' from p4 print on a symlink. (In practice, contents is of the form ['target\n', ''].) Signed-off-by: Evan Powers <evan.powers@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-19t1450: fix testcases that were wrongly expecting failureLibravatar Thomas Rast1-8/+8
Almost exactly a year ago in 02a6552 (Test fsck a bit harder), I introduced two testcases that were expecting failure. However, the only bug was that the testcases wrote *blobs* because I forgot to pass -t tag to hash-object. Fix this, and then adjust the rest of the test to properly check the result. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-19Documentation: Fix indentation problem in git-commit(1)Libravatar Jacob Helwig1-3/+3
Ever since the "See linkgit:git-config[1]..." paragraph was added to the description for --untracked-files (d6293d1), the paragraphs for the following options were indented at the same level as the "See linkgit:git-config[1]" paragraph. This problem showed up in the manpages, but not in the HTML documentation. While this does fix the alignment of the options following --untracked-files in the manpage, the "See linkgit..." portion of the description does not retain its previous indentation level in the manpages, or HTML documentation. Signed-off-by: Jacob Helwig <jacob.helwig@gmail.com> Acked-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-19Merge branch 'maint'Libravatar Junio C Hamano7-29/+45
* maint: rm: fix bug in recursive subdirectory removal Documentation: describe --thin more accurately
2010-02-19Merge branch 'jk/maint-rmdir-fix' into maintLibravatar Junio C Hamano2-1/+9
* jk/maint-rmdir-fix: rm: fix bug in recursive subdirectory removal
2010-02-18rm: fix bug in recursive subdirectory removalLibravatar Jeff King2-1/+9
If we remove a path in a/deep/subdirectory, we should try to remove as many trailing components as possible (i.e., subdirectory, then deep, then a). However, the test for the return value of rmdir was reversed, so we only ever deleted at most one level. The fix is in remove_path, so "apply" and "merge-recursive" also are fixed. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-18Documentation: describe --thin more accuratelyLibravatar Stephen Boyd5-28/+36
The description for --thin was misleading and downright wrong. Correct it with some inspiration from the description of index-pack's --fix-thin and some background information from Nicolas Pitre <nico@fluxnic.net>. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17Merge branch 'maint'Libravatar Junio C Hamano10-36/+39
* maint: docs: don't talk about $GIT_DIR/refs/ everywhere
2010-02-17docs: don't talk about $GIT_DIR/refs/ everywhereLibravatar Jeff King10-36/+39
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we may also consult the packed refs mechanism. These days we tend to treat the "refs hierarchy" as more of an abstract namespace that happens to be represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at worst it can confuse users who then look in $GIT_DIR/refs and find that it is missing some of the refs they expected to see. This patch drops most uses of "$GIT_DIR/refs/*", changing them into just "refs/*", under the assumption that users can handle the concept of an abstract refs namespace. There are a few things to note: - most cases just dropped the $GIT_DIR/ portion. But for cases where that left _just_ the word "refs", I changed it to "refs/" to help indicate that it was a hierarchy. I didn't do the same for longer paths (e.g., "refs/heads" remained, instead of becoming "refs/heads/"). - in some cases, no change was made, as the text was explicitly about unpacked refs (e.g., the discussion in git-pack-refs). - In some cases it made sense instead to note the existence of packed refs (e.g., in check-ref-format and rev-parse). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17Merge branch 'np/fast-import-idx-v2'Libravatar Junio C Hamano2-95/+84
* np/fast-import-idx-v2: fast-import: use the diff_delta() max_delta_size argument fast-import: honor pack.indexversion and pack.packsizelimit config vars fast-import: make default pack size unlimited fast-import: use write_idx_file() instead of custom code fast-import: use sha1write() for pack data fast-import: start using struct pack_idx_entry Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17Update draft release notes to 1.7.1Libravatar Junio C Hamano1-1/+4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: Update 1.7.0.1 release notes
2010-02-17Update 1.7.0.1 release notesLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17Merge branch 'jk/cherry-pick-reword' into maintLibravatar Junio C Hamano1-23/+19
* jk/cherry-pick-reword: cherry-pick: prettify the advice message cherry-pick: show commit name instead of sha1 cherry-pick: format help message as strbuf cherry-pick: refactor commit parsing code cherry-pick: rewrap advice message
2010-02-17Merge branch 'jk/grep-double-dash' into maintLibravatar Junio C Hamano2-0/+43
* jk/grep-double-dash: accept "git grep -- pattern"
2010-02-17Merge branch 'jc/typo' into maintLibravatar Junio C Hamano17-19/+20
* jc/typo: Typofixes outside documentation area
2010-02-17gitweb: Protect escaping functions against calling on undefLibravatar Jakub Narebski1-1/+8
This is a bit of future-proofing esc_html and friends: when called with undefined value they would now would return undef... which would probably mean that error would still occur, but closer to the source of problem. This means that we can safely use esc_html(shift) || "Internal Server Error" in die_error() instead of esc_html(shift || "Internal Server Error") Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17gitweb: esc_html (short) error message in die_errorLibravatar Jakub Narebski1-2/+2
The error message (second argument to die_error) is meant to be short, one-line text description of given error. A few callers call die_error with error message containing unescaped user supplied data ($hash, $file_name). Instead of forcing callers to escape data, simply call esc_html on the parameter. Note that optional third parameter, which contains detailed error description, is meant to be HTML formatted, and therefore should be not escaped. While at it update esc_html synopsis/usage, and bring default error description to read 'Internal Server Error' (titlecased). Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 00:19:59 +0000