| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This provides a smoother degradation in performance when the cache
gets trashed due to the delta_base_cache_limit being reached. Limited
testing with really small delta_base_cache_limit values appears to confirm
this.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently there are 3 different ways to deal with the cache size.
Let's stick to only one. The compiler is smart enough to produce the exact
same code in those cases anyway.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I think we can start to slow down, as we now have covered
everything I listed earlier in the short-term release plan.
The last release 1.5.0 took painfully too long.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
An earlier conversion to run_command() from execlp() forgot that
run_command() takes an array that is terminated with NULL.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is mainly just a cleanup patch, and sets up for later changes where
the tree-diff.c "interesting()" function can return more than just a
yes/no value.
In particular, it should be quite possible to say "no subsequent entries
in this tree can possibly be interesting any more", and thus allow the
callers to short-circuit the tree entirely.
In fact, changing the callers to do so is trivial, and is really all this
patch really does, because changing "interesting()" itself to say that
nothing further is going to be interesting is definitely more complicated,
considering that we may have arbitrary pathspecs.
But in cleaning up the callers, this actually fixes a potential small
performance issue in diff_tree(): if the second tree has a lot of
uninterestign crud in it, we would keep on doing the "is it interesting?"
check on the first tree for each uninteresting entry in the second one.
The answer is obviously not going to change, so that was just not helping.
The new code is clearer and simpler and avoids this issue entirely.
I also renamed "interesting()" to "tree_entry_interesting()", because I
got frustrated by the fact that
- we actually had *another* function called "interesting()" in another
file, and I couldn't tell from the profiles which one was the one that
mattered more.
- when rewriting it to return a ternary value, you can't just do
if (interesting(...))
...
any more, but want to assign the return value to a local variable. The
name of choice for that variable would normally be "interesting", so
I just wanted to make the function name be more specific, and avoid
that whole issue (even though I then didn't choose that name for either
of the users, just to avoid confusion in the patch itself ;)
In other words, this doesn't really change anything, but I think it's a
good thing to do, and if somebody comes along and writes the logic for
"yeah, none of the pathspecs you have are interesting", we now support
that trivially.
It could easily be a meaningful optimization for things like "blame",
where there's just one pathspec, and stopping when you've seen it would
allow you to avoid about 50% of the tree traversals on average.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes "track_tree_refs()" use the same "tree_entry()" function for
counting the entries as it does for actually traversing them a few lines
later.
Not a biggie, but the reason I care was that this was the only user of
"update_tree_entry()" that didn't actually *extract* the tree entry first.
It doesn't matter as things stand now, but it meant that a separate
test-patch I had that avoided a few more "strlen()" calls by just saving
the entry length in the entry descriptor and using it directly when
updating wouldn't work without this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Run the pre-commit and post-commit hooks at appropriate places, and
display their output if any.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jb/gc:
Make gc a builtin.
|
|
* fl/cvsserver:
cvsserver: further improve messages on commit and status
cvsserver: Be more chatty
|
|
The new configuration variable core.deltaBaseCacheLimit allows the
user to control how much memory they are willing to give to Git for
caching base objects of deltas. This is not normally meant to be
a user tweakable knob; the "out of the box" settings are meant to
be suitable for almost all workloads.
We default to 16 MiB under the assumption that the cache is not
meant to consume all of the user's available memory, and that the
cache's main purpose was to cache trees, for faster path limiters
during revision traversal. Since trees tend to be relatively small
objects, this relatively small limit should still allow a large
number of objects.
On the other hand we don't want the cache to start storing 200
different versions of a 200 MiB blob, as this could easily blow
the entire address space of a 32 bit process.
We evict OBJ_BLOB from the cache first (credit goes to Junio) as
we want to favor OBJ_TREE within the cache. These are the objects
that have the highest inflate() startup penalty, as they tend to
be small and thus don't have that much of a chance to ammortize
that penalty over the entire data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* sp/run-command:
Use run_command within send-pack
Use run_command within receive-pack to invoke index-pack
Use run_command within merge-index
Use run_command for proxy connections
Use RUN_GIT_CMD to run push backends
Correct new compiler warnings in builtin-revert
Replace fork_with_pipe in bundle with run_command
Teach run-command to redirect stdout to /dev/null
Teach run-command about stdout redirection
|
|
In the Linux kernel, for example, it's common to include Cc: lines
for cases when you want to remember to cc someone on a patch without
necessarily claiming they signed off on it. Make git-send-email
aware of these.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also add support for vimdiff
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* ar/diff:
Add tests for --quiet option of diff programs
try-to-simplify-commit: use diff-tree --quiet machinery.
revision.c: explain what tree_difference does
Teach --quiet to diff backends.
diff --quiet
Remove unused diffcore_std_no_resolve
Allow git-diff exit with codes similar to diff(1)
|
|
This is a micro-optimization that grew out of the mailing list discussion
about "strlen()" showing up in profiles.
We used to pass regular C strings around to the low-level tree walking
routines, and while this worked fine, it meant that we needed to call
strlen() on strings that the caller always actually knew the size of
anyway.
So pass the length of the string down wih the string, and avoid
unnecessary calls to strlen(). Also, when extracting a pathname from a
tree entry, use "tree_entry_len()" instead of strlen(), since the length
of the pathname is directly calculable from the decoded tree entry itself
without having to actually do another strlen().
This shaves off another ~5-10% from some loads that are very tree
intensive (notably doing commit filtering by a pathspec).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>"
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A malloc() + memcpy() will always be faster than mmap() +
malloc() + inflate(). If the data is already there it is
certainly better to copy it straight away.
With this patch below I can do 'git log drivers/scsi/ >
/dev/null' about 7% faster. I bet it might be even more on
those platforms with bad mmap() support.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This trivial 256-entry delta_base cache improves performance for some
loads by a factor of 2.5 or so.
Instead of always re-generating the delta bases (possibly over and over
and over again), just cache the last few ones. They often can get re-used.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This doesn't change any code, it just creates a point for where we'd
actually do the caching of delta bases that have been generated.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
git-merge: finish when git-read-tree fails
|
|
Especially with the new index format to come, it is more appropriate
to encapsulate more into check_packed_git_idx() and assume less of the
index format in struct packed_git.
To that effect, the index_base is renamed to index_data with void * type
so it is not used directly but other pointers initialized with it. This
allows for a couple pointer cast removal, as well as providing a better
generic name to grep for when adding support for new index versions or
formats.
And index_data is declared const too while at it.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make sure pack-objects with --delta-base-offset works fine, and that
it actually produces smaller packs as expected.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The 'use packed deltified objects' test was flawed as it failed to
remove the pack and index from the previous test, effectively preventing
the desired pack from being exercised as objects could be found in that
other pack instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
An earlier patch 87ab7992 broke applymbox by blindly copying piece
from git-am, causing a harmless but annoying series of error messages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The message formating (commit v1.5.0.3-28-gbe242d5) broke the && chain.
Noticed by Dmitry Torokhov.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
|
|
We generally prefer xstrdup to just plain strdup.
Make it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch adds support for a dummy remote '.' to avoid having
to declare a fake remote like
[remote "local"]
url = .
fetch = refs/heads/*:refs/heads/*
Such a builtin remote simplifies the operation of "git-fetch",
which will populate FETCH_HEAD but will not pretend that two
repositories are in use, will not create a thin pack, and will
not perform any useless remapping of names. The speed
improvement is around 20%, and it should improve more if
"git-fetch" is converted to a builtin.
To this end, git-parse-remote is grown with a new kind of
remote, 'builtin'. In git-fetch.sh, we treat the builtin remote
specially in that it needs no pack/store operations. In fact,
doing git-fetch on a builtin remote will simply populate
FETCH_HEAD appropriately.
The patch also improves of the --track/--no-track support,
extending it so that branch.<name>.remote items referring '.'
can be created. Finally, it fixes a typo in git-checkout.sh.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This uses diff-tree --quiet machinery to terminate the internal
diff-tree between a commit and its parents via revs.pruning (not
revs.diffopt) as soon as we find enough about the tree change.
With respect to the optionally given pathspec, we are interested
if the tree of commit is identical to the parent's, only adds
new paths to the parent's, or there are other differences. As
soon as we find out that there is one such other kind of
difference, we do not have to compare the rest of the tree.
Because we do not call standard diff_addremove/diff_change, we
instruct the diff-tree machinery to stop early by setting
has_changes when we say we found the trees to be different.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This explains how tree_difference variable is used, and updates two
places where the code knows symbolic constant REV_TREE_SAME is 0.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This teaches git-diff-files, git-diff-index and git-diff-tree
backends to exit early under --quiet option.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds the command line option 'quiet' to tell 'git diff-*'
that we are not interested in the actual diff contents but only
want to know if there is any change. This option automatically
turns --exit-code on, and turns off output formatting, as it
does not make much sense to show the first hit we happened to
have found.
The --quiet option is silently turned off (but --exit-code is
still in effect, so is silent output) if postprocessing filters
such as pickaxe and diff-filter are used. For all practical
purposes I do not think of a reason to want to use these filters
and not viewing the diff output.
The backends have not been taught about the option with this patch.
That is a topic for later rounds.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This was only used by diff-tree-helper program, whose purpose
was to translate a raw diff to a patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This introduces a new command-line option: --exit-code. The diff
programs will return 1 for differences, return 0 for equality, and
something else for errors.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Previous formulation could make it appear as removing all lines
matching a regexp (at least, I was looking for such a flag, and
confused this flag for what I was looking for).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The symbolic notation of the fork point can contain whitespaces (e.g.
"git checkout -m 'HEAD@{9 hours ago}'"). Quote strings properly
when using eval to prepare GITHEAD_$new
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Previously git-describe would output lines of the form
v1.1.1-gf509d56
The update hook found the dash and stripped it off using
sed 's/-g.*//'
The remainder was then used as the previous tag name.
However, git-describe has changed format. The output is now of the form
v1.1.1-23-gf509d56
The above sed fragment doesn't strip the middle "-23", and so the
previous tag name used would be "v1.1.1-23". This is incorrect.
Since the hook script was written, git-describe now gained support for
"--abbrev=0", which it uses as a special flag to tell it not to output
anything other than the nearest tag name. This patch fixes the problem,
and prevents any future recurrence by using this new flag rather than
sed to find the previous tag.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
commit: Also print the old revision similar to how cvs does it and
prepend a line stating the filename so that one can actually
understand what happened when commiting more than one file.
status: Fix the RCS filename displayed. The directory was
printed twice.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Submit some additional messages to the client on commit and update.
Inspired by the standard CVS server though a little more terse.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/repack:
prepare_packed_git(): sort packs by age and localness.
|
|
* jc/fetch:
.gitignore: add git-fetch--tool
builtin-fetch--tool: fix reflog notes.
git-fetch: retire update-local-ref which is not used anymore.
builtin-fetch--tool: make sure not to overstep ls-remote-result buffer.
fetch--tool: fix uninitialized buffer when reading from stdin
builtin-fetch--tool: adjust to updated sha1_object_info().
git-fetch--tool takes flags before the subcommand.
Use stdin reflist passing in git-fetch.sh
Use stdin reflist passing in parse-remote
Allow fetch--tool to read from stdin
git-fetch: rewrite expand_ref_wildcard in C
git-fetch: rewrite another shell loop in C
git-fetch: move more code into C.
git-fetch--tool: start rewriting parts of git-fetch in C.
git-fetch: split fetch_main into fetch_dumb and fetch_native
|
|
* dz/mailinfo:
Add a couple more test cases to the suite.
restrict the patch filtering
builtin-mailinfo.c infrastrcture changes
|
James Bowes
Nicolas Pitre
Junio C Hamano
Linus Torvalds
Alexandre Julliard
Shawn O. Pearce
J. Bruce Fields
Theodore Ts'o
Santi Béjar
Alex Riesen
Paolo Bonzini
Alex Riesen
Yann Dirson
Andy Parkins
Frank Lichtenheld