| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Before we generate a "cscope.out" file, remove that file explicitly,
and not everything matching "cscope*". This doesn't change any
behavior of the Makefile in practice, but makes this rule less
confusing, and consistent with other similar rules.
The cscope target was added in a2a9150bf06 (makefile: Add a cscope
target, 2007-10-06). It has always referred to cscope* instead of to
cscope.out in .gitignore and the "clean" target, even though we only
ever generated a cscope.out file.
This was seemingly done to aid use-cases where someone invoked cscope
with the "-q" flag, which would make it create a "cscope.in.out" and
"cscope.po.out" files in addition to "cscope.out".
But us removing those files we never generated is confusing, so let's
only remove the file we need to, furthermore let's use the "-f" flag
to explicitly name the cscope.out file, even though it's the default
if not "-f" argument is supplied.
It is somewhat inconsistent to change from the glob here but not in
the "clean" rule and .gitignore, an earlier version of this change
updated those as well, but see [1][2] for why they were kept.
1. https://lore.kernel.org/git/87k0lit57x.fsf@evledraar.gmail.com/
2. https://lore.kernel.org/git/87im0kn983.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the "FORCE" dependency from the "tags", "TAGS" and "cscope"
targets, instead make them depend on whether or not the relevant
source files have changed.
For the cscope target we need to change it to depend on the actual
generated file while we generate while we're at it, as the next commit
will discuss we always generate a cscope.out file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't show the very verbose $(FIND_SOURCE_FILES) command on every
"make cscope" invocation.
See my recent 3c80fcb591 (Makefile: add QUIET_GEN to "tags" and "TAGS"
targets, 2021-03-28) for the same fix for the other adjacent targets.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the ".PHONY: cscope" rule to live alongside the "cscope" target
itself, not to be all the way near the bottom where we define the
"FORCE" rule.
That line was last modified in 2f76919517e (MinGW: avoid collisions
between "tags" and "TAGS", 2010-09-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n-2.32.0-rnd1.1
* tag 'l10n-2.32.0-rnd1.1' of git://github.com/git-l10n/git-po: (25 commits)
l10n: es: 2.32.0 round 1
l10n: zh_CN: for git v2.32.0 l10n round 1
l10n: Update Catalan translation
l10n: de.po: Update German translation for Git v2.32.0
l10n: README: note on fuzzy translations
l10n: README: document l10n conventions
l10n: README: document "core translation"
l10n: README: document git-po-helper
l10n: README: add file extention ".md"
l10n: pt_PT: add Portuguese translations part 3
l10n: bg.po: Updated Bulgarian translation (5204t)
l10n: id: po-id for 2.32.0 (round 1)
l10n: vi.po(5204t): Updated Vietnamese translation for v2.32.0
l10n: zh_TW.po: localized
l10n: zh_TW.po: v2.32.0 round 1 (11 untranslated)
l10n: sv.po: Update Swedish translation (5204t0f0u)
l10n: fix typos in po/TEAMS
l10n: fr: v2.32.0 round 1
l10n: tr: v2.32.0-r1
l10n: fr: fixed inconsistencies
...
|
|
Test fix.
* rs/parallel-checkout-test-fix:
parallel-checkout: avoid dash local bug in tests
|
|
Last minute portability fix.
* jc/fsync-can-fail-with-eintr:
fsync(): be prepared to see EINTR
|
|
Dash bug https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097
lets the shell erroneously perform field splitting on the expansion of a
command substitution during declaration of a local variable. It causes
the parallel-checkout tests to fail e.g. when running them with
/bin/dash on MacOS 11.4, where they error out like this:
./t2080-parallel-checkout-basics.sh: 33: local: 0: bad variable name
That's because the output of wc -l contains leading spaces and the
returned number of lines is treated as another variable to declare, i.e.
as in "local workers= 0".
Work around it by enclosing the command substitution in quotes.
Helped-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christopher Diaz Riveros <christopher.diaz.riv@gmail.com>
|
|
Translate 126 new messages (5204t0f0u) for git 2.32.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'fix_typo' of github.com:e-yes/git:
l10n: ru.po: fix typo in Russian translation
|
|
Some platforms, like NonStop do not automatically restart fsync()
when interrupted by a signal, even when that signal is setup with
SA_RESTART.
This can lead to test breakage, e.g., where "--progress" is used,
thus SIGALRM is sent often, and can interrupt an fsync() syscall.
Make sure we deal with such a case by retrying the syscall
ourselves. Luckily, we call fsync() fron a single wrapper,
fsync_or_die(), so the fix is fairly isolated.
Reported-by: Randall S. Becker <randall.becker@nexbridge.ca>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Taylor Blau <me@ttaylorr.com>
[jc: the above two did most of the work---I just tied the loose end]
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'pt-PT' of github.com:git-l10n-pt-PT/git-po:
l10n: pt_PT: add Portuguese translations part 3
l10n: pt_PT: add Portuguese translations part 2
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent change to make git-completion.bash use $__git_cmd_idx
in more places broke a number of completions on zsh because it
modified __git_main but did not update __git_zsh_main.
Notably, completions for "add", "branch", "mv" and "push" were
broken as a result of this change.
In addition to the undefined variable usage, "git mv <tab>" also
prints the following error:
__git_count_arguments:7: bad math expression:
operand expected at `"1"'
_git_mv:[:7: unknown condition: -gt
Remove the quotes around $__git_cmd_idx in __git_count_arguments
and set __git_cmd_idx=1 early in __git_zsh_main to fix the
regressions from 59d85a2a05.
This was tested on zsh 5.7.1 (x86_64-apple-darwin19.0).
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fuzzy translation problem can occur when updating translations.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Document the conventions that l10n contributors must follow.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Contributor for a new language must complete translations of a small set
of l10n messages.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Document the PO helper program (git-po-helper) with installation and
basic usage.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Add file extension ".md" to "po/README" to help to display this markdown
file properly.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Last minute compilation fix.
* ab/fsck-api-cleanup:
builtin/fsck.c: don't conflate "int" and "enum" in callback
|
|
Fix a warning on AIX's xlc compiler that's been emitted since my
a1aad71601a (fsck.h: use "enum object_type" instead of "int",
2021-03-28):
"builtin/fsck.c", line 805.32: 1506-068 (W) Operation between
types "int(*)(struct object*,enum object_type,void*,struct
fsck_options*)" and "int(*)(struct object*,int,void*,struct
fsck_options*)" is not allowed.
I.e. it complains about us assigning a function with a prototype "int"
where we're expecting "enum object_type".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* Correct malformed strings
* Transforming 'não' (no) into affirmative
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
* 'l10n/zh_TW/21-05-20' of github.com:l10n-tw/git-po:
l10n: zh_TW.po: localized
l10n: zh_TW.po: v2.32.0 round 1 (11 untranslated)
|
|
* 'master' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix-up to a topic that is already in 'master'.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
Revert "dir: update stale description of treat_directory()"
Revert "dir: introduce readdir_skip_dot_and_dotdot() helper"
|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 4e689d81718eb6e939cace317ea3e33cb994dcbb,
to be replaced with a reworked version.
|
|
This reverts commit b548f0f1568f6b01e55ca69c24d3cb19489f92aa,
to be replaced with a reworked version.
|
|
"ld" on Solaris fails to link some test helpers, which has been
worked around by reshuffling the inline function definitions from a
header file to a source file that is the only user of them.
* ab/pack-linkage-fix:
pack-objects: move static inline from a header to the sole consumer
|
|
Test portability fix.
* mt/t2080-cp-symlink-fix:
t2080: fix cp invocation to copy symlinks instead of following them
|
|
Code simplification.
* ab/send-email-inline-hooks-path:
send-email: move "hooks_path" invocation to git-send-email.perl
send-email: don't needlessly abs_path() the core.hooksPath
|
|
Workaround flaky tests introduced recently.
* ds/t1092-fix-flake-from-progress:
t1092: revert the "-1" hack for emulating "no progress meter"
t1092: use GIT_PROGRESS_DELAY for consistent results
|
|
Move the code that is only used in builtin/pack-objects.c out of
pack-objects.h.
This fixes an issue where Solaris's SunCC hasn't been able to compile
git since 483fa7f42d9 (t/helper/test-bitmap.c: initial commit,
2021-03-31).
The real origin of that issue is that in 898eba5e630 (pack-objects:
refer to delta objects by index instead of pointer, 2018-04-14)
utility functions only needed by builtin/pack-objects.c were added to
pack-objects.h. Since then the header has been used in a few other
places, but 483fa7f42d9 was the first time it was used by test helper.
Since Solaris is stricter about linking and the oe_get_size_slow()
function lives in builtin/pack-objects.c the build started failing
with:
Undefined first referenced
symbol in file
oe_get_size_slow t/helper/test-bitmap.o
ld: fatal: symbol referencing errors. No output written to t/helper/test-tool
On other platforms this is presumably OK because the compiler and/or
linker detects that the "static inline" functions that reference
oe_get_size_slow() aren't used.
Let's solve this by moving the relevant code from pack-objects.h to
builtin/pack-objects.c. This is almost entirely a code-only move, but
because of the early macro definitions in that file referencing some
of these inline functions we need to move the definition of "static
struct packing_data to_pack" earlier, and declare these inline
functions above the macros.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'fr_next' of github.com:jnavila/git:
l10n: fr: v2.32.0 round 1
l10n: fr: fixed inconsistencies
l10n: fr.po fixed inconsistencies
|
|
t2080 makes a few copies of a test repository and later performs a
branch switch on each one of the copies to verify that parallel checkout
and sequential checkout produce the same results. However, the
repository is copied with `cp -R` which, on some systems, defaults to
following symlinks on the directory hierarchy and copying their target
files instead of copying the symlinks themselves. AIX is one example of
system where this happens. Because the symlinks are not preserved, the
copied repositories have paths that do not match what is in the index,
causing git to abort the checkout operation that we want to test. This
makes the test fail on these systems.
Fix this by copying the repository with the POSIX flag '-P', which
forces cp to copy the symlinks instead of following them. Note that we
already use this flag for other cp invocations in our test suite (see
t7001). With this change, t2080 now passes on AIX.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the newly added "hooks_path" API in Git.pm to its only user in
git-send-email.perl. This was added in c8243933c74 (git-send-email:
Respect core.hooksPath setting, 2021-03-23), meaning that it hasn't
yet made it into a non-rc release of git.
The consensus with Git.pm is that we need to be considerate of
out-of-tree users who treat it as a public documented interface. We
should therefore be less willing to add new functionality to it, least
we be stuck supporting it after our own uses for it disappear.
In this case the git-send-email.perl hook invocation will probably be
replaced by a future "git hook run" command, and in the commit
preceding this one the "hooks_path" become nothing but a trivial
wrapper for "rev-parse --git-path hooks" anyway (with no
Cwd::abs_path() call), so let's just inline this command in
git-send-email.perl itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In c8243933c74 (git-send-email: Respect core.hooksPath setting,
2021-03-23) we started supporting core.hooksPath in "send-email". It's
been reported that on Windows[1] doing this by calling abs_path()
results in different canonicalizations of the absolute path.
This wasn't an issue in c8243933c74 itself, but was revealed by my
ea7811b37e0 (git-send-email: improve --validate error output,
2021-04-06) when we started emitting the path to the hook, which was
previously only internal to git-send-email.perl.
The just-landed 53753a37d09 (t9001-send-email.sh: fix expected
absolute paths on Windows, 2021-05-24) narrowly fixed this issue, but
I believe we can do better here. We should not be relying on whatever
changes Perl's abs_path() makes to the path "rev-parse --git-path
hooks" hands to us. Let's instead trust it, and hand it to Perl's
system() in git-send-email.perl. It will handle either a relative or
absolute path.
So let's revert most of 53753a37d09 and just have "hooks_path" return
what we get from "rev-parse" directly without modification. This has
the added benefit of making the error message friendlier in the common
case, we'll no longer print an absolute path for repository-local hook
errors.
1. http://lore.kernel.org/git/bb30fe2b-cd75-4782-24a6-08bb002a0367@kdbg.org
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This looked like a good idea, but it seems to break tests on 32-bit
builds rather badly. Revert to just use "100 thousands must be big
enough" for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Translate following components:
* builtin/add.c
* worktree.c
* builtin/branch.c
* builtin/commit.c
* builtin/merge.c
* builtin/rebase.c
* builtin/pull.c
* diff.c
* add-interactive.c
* builtin/log.c
* builtin/stash.c
* builtin/tag.c
* config.c
* builtin/config.c
* reset.c
* builtin/remote.c
* builtin/rm.c
* builtin/mv.c
* builtin/clean.c
* builtin/help.c
* archive.c
* submodule.c
* builtin/submodule--helper.c
* submodule-config.c
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
|
|
Regression fix.
* mt/init-template-userpath-fix:
init: fix bug regarding ~/ expansion in init.templateDir
|
|
Fix a test breakage.
* jt/send-email-validate-errors-fix:
t9001-send-email.sh: fix expected absolute paths on Windows
|
|
* ab/send-email-validate-errors-fix:
send-email: fix missing error message regression
|
|
The t1092-sparse-checkout-compatibility.sh tests compare the stdout and
stderr for several Git commands across both full checkouts, sparse
checkouts with a full index, and sparse checkouts with a sparse index.
Since these are direct comparisons, sometimes a progress indicator can
flush at unpredictable points, especially on slower machines. This
causes the tests to be flaky.
One standard way to avoid this is to add GIT_PROGRESS_DELAY=0 to the Git
commands that are run, as this will force every progress indicator
created with start_progress_delay() to be created immediately. However,
there are some progress indicators that are created in the case of a
full index that are not created with a sparse index. Moreover, their
values may be different as those indexes have a different number of
entries.
Instead, use GIT_PROGRESS_DELAY=-1 (which will turn into UINT_MAX)
to ensure that any reasonable machine running these tests would
never display delayed progress indicators.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Junio C Hamano
René Scharfe
Christopher Diaz Riveros
Jiang Xin
Jordi Mas
Matthias Rüster
David Aguilar
Bagas Sanjaya
Daniel Santos
Alexander Shopov
Elijah Newren
Derrick Stolee
Matheus Tavares
Derrick Stolee