Age | Commit message (Collapse) | Author | Files | Lines |
|
Small modernization of the rerere-train script (in contrib/).
* jc/rerere-train-modernise:
rerere-train: two fixes to the use of "git show -s"
|
|
A not-so-common mistake is to write a script to feed "git bisect
run" without making it executable, in which case all tests will
exit with 126 or 127 error codes, even on revisions that are marked
as good. Try to recognize this situation and stop iteration early.
* rs/bisect-executable-not-found:
bisect--helper: double-check run command on exit code 126 and 127
bisect: document run behavior with exit codes 126 and 127
bisect--helper: release strbuf and strvec on run error
bisect--helper: report actual bisect_state() argument on error
|
|
Further polishing of "git sparse-checkout".
* en/sparse-checkout-fixes:
sparse-checkout: reject arguments in cone-mode that look like patterns
sparse-checkout: error or warn when given individual files
sparse-checkout: pay attention to prefix for {set, add}
sparse-checkout: correctly set non-cone mode when expected
sparse-checkout: correct reapply's handling of options
|
|
Test modernization.
* cg/t3903-modernize:
tests: make the code more readable
tests: allow testing if a path is truly a file or a directory
t/t3903-stash.sh: replace test [-d|-f] with test_path_is_*
|
|
The script uses "git show -s" to display the title of the merge
commit being studied, without explicitly disabling the pager, which
is not a safe thing to do in a script.
For example, when the pager is set to "less" with "-SF" options (-S
tells the pager not to fold lines but allow horizontal scrolling to
show the overly long lines, -F tells the pager not to wait if the
output in its entirety is shown on a single page), and the title of
the merge commit is longer than the width of the terminal, the pager
will wait until the end-user tells it to quit after showing the
single line.
Explicitly disable the pager with this "git show" invocation to fix
this.
The command uses the "--pretty=format:..." format, which adds LF in
between each pair of commits it outputs, which means that the label
for the merge being learned from will be followed by the next
message on the same line. "--pretty=tformat:..." is what we should
instead, which adds LF after each commit, or a more modern way to
spell it, i.e. "--format=...". This existing breakage becomes
easier to see, now we no longer use the pager.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document Taylor as a new member of Git PLC at SFC. Welcome.
* tb/coc-plc-update:
CODE_OF_CONDUCT.md: update PLC members list
|
|
Messages "ort" merge backend prepares while dealing with conflicted
paths were unnecessarily confusing since it did not differentiate
inner merges and outer merges.
* en/ort-inner-merge-conflict-report:
merge-ort: make informational messages from recursive merges clearer
|
|
Workaround we have for versions of PCRE2 before their version 10.36
were in effect only for their versions newer than 10.36 by mistake,
which has been corrected.
* rs/pcre-invalid-utf8-fix-fix:
grep: fix triggering PCRE2_NO_START_OPTIMIZE workaround
|
|
Setting core.untrackedCache to true failed to add the untracked
cache extension to the index.
* ds/core-untracked-cache-config:
dir: force untracked cache with core.untrackedCache
|
|
Leakfixes.
* ab/diff-free-more:
diff.[ch]: have diff_free() free options->parseopts
diff.[ch]: have diff_free() call clear_pathspec(opts.pathspec)
|
|
Plug (some) memory leaks around parse_date_format().
* ab/date-mode-release:
date API: add and use a date_mode_release()
date API: add basic API docs
date API: provide and use a DATE_MODE_INIT
date API: create a date.h, split from cache.h
cache.h: remove always unused show_date_human() declaration
|
|
Finishing touches to an earlier "name-rev --annotate-stdin" series.
* jc/name-rev-stdin:
name-rev: replace --stdin with --annotate-stdin in synopsis
|
|
Some code clean-up in the "git grep" machinery.
* ab/grep-patterntype:
grep: simplify config parsing and option parsing
grep.c: do "if (bool && memchr())" not "if (memchr() && bool)"
grep.h: make "grep_opt.pattern_type_option" use its enum
grep API: call grep_config() after grep_init()
grep.c: don't pass along NULL callback value
built-ins: trust the "prefix" from run_builtin()
grep tests: add missing "grep.patternType" config tests
grep tests: create a helper function for "BRE" or "ERE"
log tests: check if grep_config() is called by "log"-like cmds
grep.h: remove unused "regex_t regexp" from grep_opt
|
|
"git clone --filter=... --recurse-submodules" only makes the
top-level a partial clone, while submodules are fully cloned. This
behaviour is changed to pass the same filter down to the submodules.
* js/apply-partial-clone-filters-recursively:
clone, submodule: pass partial clone filters to submodules
|
|
Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
|
|
Further tweaks on progress API.
* ab/only-single-progress-at-once:
pack-bitmap-write.c: don't return without stop_progress()
progress API: unify stop_progress{,_msg}(), fix trace2 bug
progress.c: refactor stop_progress{,_msg}() to use helpers
progress.c: use dereferenced "progress" variable, not "(*p_progress)"
progress.h: format and be consistent with progress.c naming
progress.c tests: test some invalid usage
progress.c tests: make start/stop commands on stdin
progress.c test helper: add missing braces
leak tests: fix a memory leak in "test-progress" helper
|
|
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
|
|
Error output given in response to an ambiguous object name has been
improved.
* ab/ambiguous-object-name:
object-name: re-use "struct strbuf" in show_ambiguous_object()
object-name: iterate ambiguous objects before showing header
object-name: show date for ambiguous tag objects
object-name: make ambiguous object output translatable
object-name: explicitly handle bad tags in show_ambiguous_object()
object-name: explicitly handle OBJ_BAD in show_ambiguous_object()
object-name tests: add tests for ambiguous object blind spots
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation update
* bc/clarify-eol-attr:
doc: clarify interaction between 'eol' and text=auto
|
|
Update mailmap entries.
* ds/mailmap:
mailmap: change primary address for Derrick Stolee
|
|
"git log --graph --graph" used to leak a graph structure, and there
was no way to countermand "--graph" that appear earlier on the
command line. A "--no-graph" option has been added and resource
leakage has been plugged.
* ah/log-no-graph:
log: add a --no-graph option
log: fix memory leak if --graph is passed multiple times
|
|
Fix tests that are unnecessarily specific to ref-files backend.
* hw/t1410-adjust-test-for-reftable:
t1410: mark bufsize boundary test as REFFILES
t1410: use test-tool ref-store to inspect reflogs
|
|
A couple of optimization to "git fetch".
* ps/fetch-optim-with-commit-graph:
fetch: skip computing output width when not printing anything
fetch-pack: use commit-graph when computing cutoff
|
|
Test modernization.
* sy/t0001-use-path-is-helper:
t0001: replace "test [-d|-f]" with test_path_is_* functions
|
|
L10n support for a few error messages.
* bs/forbid-i18n-of-protocol-token-in-fetch-pack:
fetch-pack: parameterize message containing 'ready' keyword
|
|
Replace the parsing of the output of "ls -l" by test_path_is_symlink() and
test_readlink().
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add test_path_is_file_not_symlink(), test_path_is_dir_not_symlink()
and test_path_is_symlink(). Case of use for the first one
in test t/t3903-stash.sh to replace "test -f" because that function
explicitly want the file not to be a symlink.
Give more friendly error message.
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use test_path_is_* to replace test [-d|-f] because that give more
explicit debugging information. And it doesn't change the semantics.
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In sparse-checkout add/set under cone mode, the arguments passed are
supposed to be directories rather than gitignore-style patterns.
However, given the amount of effort spent in the manual discussing
patterns, it is easy for users to assume they need to pass patterns such
as
/foo/*
or
!/bar/*/
or perhaps they really do ignore the directory rule and specify a
random gitignore-style pattern like
*.c
To help catch such mistakes, throw an error if any of the positional
arguments:
* starts with any of '/!'
* contains any of '*?[]'
Inform users they can pass --skip-checks if they have a directory that
really does have such special characters in its name. (We exclude '\'
because of sparse-checkout's special handling of backslashes; see
the MINGW test in t1091.46.)
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The set and add subcommands accept multiple positional arguments.
The meaning of these arguments differs slightly in the two modes:
Cone mode only accepts directories. If given a file, it would
previously treat it as a directory, causing not just the file itself to
be included but all sibling files as well -- likely against users'
expectations. Throw an error if the specified path is a file in the
index. Provide a --skip-checks argument to allow users to override
(e.g. for the case when the given path IS a directory on another
branch).
Non-cone mode accepts general gitignore patterns. There are many
reasons to avoid this mode, but one possible reason to use it instead of
cone mode: to be able to select individual files within a directory.
However, if a file is passed to set/add in non-cone mode, you won't be
selecting a single file, you'll be selecting a file with the same name
in any directory. Thus users will likely want to prefix any paths they
specify with a leading '/' character; warn users if the patterns they
specify exactly name a file because it means they are likely missing
such a leading slash.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cone mode, non-option arguments to set & add are clearly paths, and
as such, we should pay attention to prefix.
In non-cone mode, it is not clear that folks intend to provide paths
since the inputs are gitignore-style patterns. Paying attention to
prefix would prevent folks from doing things like
git sparse-checkout add /.gitattributes
git sparse-checkout add '/toplevel-dir/*'
In fact, the former will result in
fatal: '/.gitattributes' is outside repository...
while the later will result in
fatal: Invalid path '/toplevel-dir': No such file or directory
despite the fact that both are valid gitignore-style patterns that would
select real files if added to the sparse-checkout file. This might lead
people to just use the path without the leading slash, potentially
resulting in them grabbing files with the same name throughout the
directory hierarchy contrary to their expectations. See also [1] and
[2]. Adding prefix seems to just be fraught with error; so for now
simply throw an error in non-cone mode when sparse-checkout set/add are
run from a subdirectory.
[1] https://lore.kernel.org/git/e1934710-e228-adc4-d37c-f706883bd27c@gmail.com/
[2] https://lore.kernel.org/git/CABPp-BHXZ-XLxY0a3wCATfdq=6-EjW62RzbxKAoFPeXfJswD2w@mail.gmail.com/
Helped-by: Junio Hamano <gitster@pobox.com>
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
commit f2e3a218e8 ("sparse-checkout: enable `set` to initialize
sparse-checkout mode", 2021-12-14) made the `set` command able to
initialize sparse-checkout mode, but it also had to function when
sparse-checkout mode was already setup and the user just wanted to
change the sparsity paths. So, if the user passed --cone or --no-cone,
then we should override the current setting, but if they didn't pass
either, we should use whatever the current cone mode setting is.
Unfortunately, there was a small error in the logic in that it would not
set the in-memory cone mode value (core_sparse_checkout_one) when
--no-cone was specified, but since it did set the config setting on
disk, any subsequent git invocation would correctly get non-cone mode.
As such, the error did not previously matter. However, a subsequent
commit will add some logic that depends on core_sparse_checkout_cone
being set to the correct mode, so make sure it is set consistently with
the config values we will be writing to disk.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 4e256731d6 ("sparse-checkout: enable reapply to take
--[no-]{cone,sparse-index}", 2021-12-14) made it so that reapply could
take additional options but added no tests. Tests would have shown that
the feature doesn't work because the initial values are set AFTER
parsing the command line options instead of before. Add a test and set
the initial value at the appropriate time.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"working tree" and "per-worktree ref" were in glossary, but
"worktree" itself wasn't, which has been corrected.
* jc/glossary-worktree:
glossary: describe "worktree"
|
|
Test modernization.
* jd/t0015-modernize:
t/t0015-hash.sh: remove unnecessary '\' at line end
|
|
"git cmd -h" outside a repository should error out cleanly for many
commands, but instead it hit a BUG(), which has been corrected.
* js/short-help-outside-repo-fix:
t0012: verify that built-ins handle `-h` even without gitdir
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
|
|
When there is no object to write .bitmap file for, "git
multi-pack-index" triggered an error, instead of just skipping,
which has been corrected.
* tb/midx-no-bitmap-for-no-objects:
midx: prevent writing a .bitmap without any objects
|
|
* ab/release-transport-ls-refs-options:
ls-remote & transport API: release "struct transport_ls_refs_options"
|
|
Trivial leakfix.
* ab/hash-object-leakfix:
hash-object: fix a trivial leak in --path
|
|
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
|
|
Conditional test update.
* ab/t0051-skip-on-non-windows:
t0051: use "skip_all" under !MINGW in single-test file
|
|
Because a deletion of ref would need to remove it from both the
loose ref store and the packed ref store, a delete-ref operation
that logically removes one ref may end up invoking ref-transaction
hook twice, which has been corrected.
* ps/avoid-unnecessary-hook-invocation-with-packed-refs:
refs: skip hooks when deleting uncovered packed refs
refs: do not execute reference-transaction hook on packing refs
refs: demonstrate excessive execution of the reference-transaction hook
refs: allow skipping the reference-transaction hook
refs: allow passing flags when beginning transactions
refs: extract packed_refs_delete_refs() to allow control of transaction
|
|
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
|
|
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
|
|
As part of our code of conduct, we maintain a list of active members on
the Project Leadership Committee, which serves a couple of purposes. The
details are in 3f9ef874a7 (CODE_OF_CONDUCT: mention individual
project-leader emails, 2019-09-26), but the gist is as follows:
- It makes it clear that people with a CoC complaint may contact
members individually as opposed to the general PLC list (in case the
subject of their complaint has to do with one of the committee
members).
- It also serves as the de-facto list of people on the PLC, which
isn't committed anywhere else in the tree.
As of [1], Peff is no longer a member of Git's Project Leadership
Committee. Let's update the list of active members accordingly [2].
This also gives us a convenient opportunity to thank Peff for his many
years of service on the PLC, during which he helped the Git community in
more ways than we can easily list here.
[1]: https://lore.kernel.org/git/YboaAe4LWySOoAe7@coredump.intra.peff.net/
[2]: https://lore.kernel.org/git/CAP8UFD2XxP9r3PJ4GQjxUbV=E1ASDq1NDgB-h+S=v-bZQ7DYwQ@mail.gmail.com/
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
|