| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When "git status -v" shows a diff, we did not respect the
user's usual diff preferences at all. Loading just
git_diff_basic_config would give us things like rename
limits and diff drivers. But it makes even more sense to
load git_diff_ui_config, which gives us colorization if the
user has requested it.
Note that we need to take special care to cancel
colorization when writing to the commit template file, as
described in the code comments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We treat symlinks as text containing the results of the
symlink, so it doesn't make much sense to text-convert them.
Similarly gitlink components just end up as the text
"Subproject commit $sha1", which we should leave intact.
Note that a typechange may be broken into two parts: the
removal of the old part and the addition of the new. In that
case, we _do_ show the textconv for any part which is the
addition or removal of a file we would ordinarily textconv,
since it is purely acting on the file contents.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Diffs that have been produced with textconv almost certainly
cannot be applied, so we want to be careful not to generate
them in things like format-patch.
This introduces a new diff options, ALLOW_TEXTCONV, which
controls this behavior. It is off by default, but is
explicitly turned on for the "log" family of commands, as
well as the "diff" porcelain (but not diff-* plumbing).
Because both text conversion and external diffing are
controlled by these diff options, we can get rid of the
"plumbing versus porcelain" distinction when reading the
config. This was an attempt to control the same thing, but
suffered from being too coarse-grained.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original implementation of textconv put the conversion
into fill_mmfile. This was a bad idea for a number of
reasons:
- it made the semantics of fill_mmfile unclear. In some
cases, it was allocating data (if a text conversion
occurred), and in some cases not (if we could use the
data directly from the filespec). But the caller had
no idea which had happened, and so didn't know whether
the memory should be freed
- similarly, the caller had no idea if a text conversion
had occurred, and so didn't know whether the contents
should be treated as binary or not. This meant that we
incorrectly guessed that text-converted content was
binary and didn't actually show it (unless the user
overrode us with "diff.foo.binary = false", which then
created problems in plumbing where the text conversion
did _not_ occur)
- not all callers of fill_mmfile want the text contents. In
particular, we don't really want diffstat, whitespace
checks, patch id generation, etc, to look at the
converted contents.
This patch pulls the conversion code directly into
builtin_diff, so that we only see the conversion when
generating an actual patch. We also then know whether we are
doing a conversion, so we can check the binary-ness and free
the data from the mmfile appropriately (the previous version
leaked quite badly when text conversion was used)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests provide a basic sanity check that textconv'd
files work. The tests try to describe how this configuration
_should_ work; thus some of the tests are marked to expect
failure.
In particular, we fail to actually textconv anything because
the 'diff.foo.binary' config option is not set, which will
be fixed in the next patch.
This also means that some "expect_failure" tests actually
seem to be fixed; in reality, this is just because textconv
is broken and its failure mode happens to make these tests
work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch also changes the term "custom diff driver" to
"external diff driver"; now that there are more facets of a
"custom driver" than just external diffing, it makes sense
to refer to the configuration of "diff.foo.*" as the "foo
diff driver", with "diff.foo.command" as the "external
driver for foo".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function isn't used outside of diff.c; the 'static' was
simply overlooked in the original writing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Not all greps support "-e", but in this case we can easily convert it to a
single extended regex.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, branches were listed on a single line in each section. But
if there are many branches, then horizontal, line-wrapped lists are very
inconvenient to scan for a human. This makes the lists vertical, i.e one
branch per line is printed.
Since "git remote" is porcelain, we can easily make this
backwards-incompatible change.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a file is different between the working tree copy, the index, and the
HEAD, then we do not allow it to be deleted without --force.
However, this is overly tight in the face of "git add --intent-to-add":
$ git add --intent-to-add file
$ : oops, I don't actually want to stage that yet
$ git rm --cached file
error: 'empty' has staged content different from both the
file and the HEAD (use -f to force removal)
$ git rm -f --cached file
Unfortunately, there is currently no way to distinguish between an empty
file that has been added and an "intent to add" file. The ideal behavior
would be to disallow the former while allowing the latter.
This patch loosens the safety valve to allow the deletion only if we are
deleting the cached entry and the cached content is empty. This covers
the intent-to-add situation, and assumes there is little harm in not
protecting users who have legitimately added an empty file. In many
cases, the file will still be empty, in which case the safety valve does
not trigger anyway (since the content remains untouched in the working
tree). Otherwise, we do remove the fact that no content was staged, but
given that the content is by definition empty, it is not terribly
difficult for a user to recreate it.
However, we still document the desired behavior in the form of two
tests. One checks the correct removal of an intent-to-add file. The other
checks that we still disallow removal of empty files, but is marked as
expect_failure to indicate this compromise. If the intent-to-add feature
is ever extended to differentiate between normal empty files and
intent-to-add files, then the safety valve can be re-tightened.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/diff-convfilter:
diff: add filter for converting binary to text
diff: introduce diff.<driver>.binary
diff: unify external diff and funcname parsing code
t4012: use test_cmp instead of cmp
|
|
* js/maint-fetch-update-head:
pull: allow "git pull origin $something:$current_branch" into an unborn branch
Fix fetch/pull when run without --update-head-ok
Conflicts:
t/t5510-fetch.sh
|
|
* jc/maint-co-track:
Enhance hold_lock_file_for_{update,append}() API
demonstrate breakage of detached checkout with symbolic link HEAD
Fix "checkout --track -b newbranch" on detached HEAD
Conflicts:
builtin-commit.c
|
|
* rs/alloc-ref:
make alloc_ref_from_str() the new alloc_ref()
use alloc_ref_from_str() everywhere
add alloc_ref_with_prefix()
|
|
* jk/fix-ls-files-other:
refactor handling of "other" files in ls-files and status
|
|
* jc/maint-reset-remove-unmerged-new:
reset --hard/read-tree --reset -u: remove unmerged new paths
|
|
* maint:
GIT 1.6.0.3
rehabilitate 'git index-pack' inside the object store
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before commit d0b92a3f6e it was possible to run 'git index-pack'
directly in the .git/objects/pack/ directory. Restore that ability.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Fix testcase failure when extended attributes are in use
|
|
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Completion for new workflow documentation introduced in f948dd8
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Turn short SHA1 names into links too
gitk: Regenerate .po files
gitk: New way of constructing menus that allows for Alt+letter accelerators
gitk: Bind Key-Return to create on new branch dialog
gitk: Fix binding for <Return> in sha1 entry field
gitk: Clean up file encoding code and add enable/disable option
gitk: Implement batch lookup and caching of encoding attrs
gitk: Enhance file encoding support
gitk: Add untranslated error messages to translation
gitk: Fix a bug in collapsing deeply nested trees
gitk: Use <Button-2> for context menus on OSX
|
|
This was added by 3942581 but never documented.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes the link detection logic to accept strings of between 6
and 40 hex characters as a possible SHA1 ID of another commit, rather
than insisting on seeing the full 40 hex characters.
To make the logic that turns a possible link into an actual link work
with abbreviated IDs, this changes the way the commitinterest array is
used, and puts the code that deals with it in a pair of new functions.
The commitinterest array is now indexed by just the first 4 characters
of the interesting SHA1 ID, and each element is a list of id + command
pairs. This also pulls out the logic for expanding an abbreviated
SHA1 to the list of matching full IDs into its own function (the way
it is done is still the same slow way it was done before, which should
be improved some day).
This also fixes the bug where clicking on a link would take you to the
wrong commit if the line number of the target had changed since the
link was made.
This is based on a patch by Linus Torvalds, but totally rewritten by me.
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
06cbe855 (Make core.sharedRepository more generic, 2008-04-16) made
several testcases in t1301-shared-repo.sh which fail if on a system
which creates files with extended attributes (e.g. SELinux), since ls
appends a '+' sign to the permission set in such cases. In fact,
POSIX.1 allows ls to add a single printable character after the usual
3x3 permission bits to show that an optional alternate/additional access
method is associated with the path.
This fixes the testcase to strip any such sign prior to verifying the
permission set.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Deskin Miller <deskinm@umich.edu>
|
|
* sh/maint-rebase3:
rebase--interactive: fix parent rewriting for dropped commits
|
|
* tr/workflow-doc:
Documentation: add manpage about workflows
Documentation: Refer to git-rebase(1) to warn against rewriting
Documentation: new upstream rebase recovery section in git-rebase
|
|
* mv/clonev:
Implement git clone -v
|
|
* ml/cygwin-filemode:
compat/cygwin.c - Use cygwin's stat if core.filemode == true
|
|
* gb/refactor-pathinfo:
gitweb: refactor input parameters parse/validation
|
|
* dp/checkattr:
git-check-attr(1): use 'verse' for multi-line synopsis sections
check-attr: Add --stdin option
check-attr: add an internal check_attr() function
|
|
* gb/formatpatch-autonbr:
format-patch: autonumber by default
|
|
* sp/describe-lwtag:
describe: Make --tags and --all match lightweight tags more often
|
|
* ae/preservemerge:
rebase: Support preserving merges in non-interactive mode
|
|
* mv/merge-noff:
builtin-commit: use reduce_heads() only when appropriate
Conflicts:
builtin-commit.c
t/t7600-merge.sh
|
|
* ns/rebase-noverify:
rebase: Document --no-verify option to bypass pre-rebase hook
rebase --no-verify
|
|
* maint:
Documentation: Clarify '--signoff' for git-commit
|
|
The code to complain when -b is not given but an explicit --track/--no-track
override was given from the command line was unchanged on one branch and
reworked on the other branch. The merge result incorrectly kept it.
Spotted by Matt McCutchen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was originally implemented in c236bcd06138bcbc929b86ad1a513635bf4847b2
but was lost to a mismerge in 9ba929ed652f5ed7707f1c684999af4ad02c4925.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This attempts to make a manpage about workflows that is both handy to
point people at it and as a beginner's introduction.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Fredrik Skolmli <fredrik@frsk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pb/rename-rowin32:
Do not rename read-only files during a push
Looks-fine-to-me-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Johannes Sixt <johannes.sixt@telecom.at>
|
|
This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.prefersymlinkrefs is in use, detaching the HEAD by
checkout incorrectly clobbers the tip of the current branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'--signoff' uses commiter name always to add the signoff line,
make it explicit in the documentation.
Signed-off-by: Abhijit Bhopatkar <bain@devslashzero.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When aborting a failed merge that has brought in a new path using "git
reset --hard" or "git read-tree --reset -u", we used to first forget about
the new path (via read_cache_unmerged) and then matched the working tree
to what is recorded in the index, thus ending up leaving the new path in
the work tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Hopefully the final draft release notes update before 1.6.0.3
diff(1): clarify what "T"ypechange status means
contrib: update packinfo.pl to not use dashed commands
force_object_loose: Fix memory leak
tests: shell negation portability fix
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Johannes Sixt
Junio C Hamano
Nicolas Pitre
Lee Marlow
Paul Mackerras
Matt McCutchen
Thomas Rast
Fredrik Skolmli
Abhijit Bhopatkar