| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Starting a pager defeats the purpose of the incremental output
mode. This changes git-blame to only paginate if --incremental
was not given.
git -p blame --incremental still starts the pager, though.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
My prior change to git-describe attempts to print the distance
between the input commit and the best matching tag, but this distance
was usually only an estimate as we always aborted revision walking
as soon as we overflowed the configured limit on the number of
possible tags (as set by --candidates).
Displaying an estimated distance is not very useful and can just be
downright confusing. Most users (heck, most Git developers) don't
immediately understand why this distance differs from the output
of common tools such as `git rev-list | wc -l`. Even worse, the
estimated distance could change in the future (including decreasing
despite no rebase occuring) if we find more possible tags earlier
on during traversal. (This could happen if more tags are merged
into the branch between queries.) These factors basically make an
estimated distance useless.
Fortunately we are usually most of the way through an accurate
distance computation by the time we abort (due to reaching the
current --candidates limit). This means we can simply finish
counting out the revisions still in our commit queue to present
the accurate distance at the end. The number of commits remaining
in the commit queue is probably less than the number of commits
already traversed, so finishing out the count is not likely to take
very long. This final distance will then always match the output of
`git rev-list | wc -l`.
We can easily reduce the total number of commits that need to be
walked at the end by stopping as soon as all of the commits in the
commit queue are flagged as being merged into the already selected
best possible tag. If that's true then there are no remaining
unseen commits which can contribute to our best possible tag's
depth counter, so further traversal is useless.
Basic testing on my Mac OS X system shows there is no noticable
performance difference between this accurate distance counting
version of git-describe and the prior version of git-describe,
at least when run on git.git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If you get two different describes at different
times from a non-rewinding branch and they both come up with the same
tag name, you can tell which is the 'newer' one by distance. This is
rather common in practice, so its incredibly useful.
[jc: still needs documentation and fixups when traversal gives up
early.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Otherwise a pathname that has funny characters such as LF would
screw up the parsing programs of the output.
Strictly speaking, this is not backward compatible, but the
current output for pathnames that have embedded LF and such
cannot be sanely parsed anyway, and pathnames that only use
characters from the portable pathname character set won't be
affected.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds --incremental option to help GUI porcelains to show
the result from git-blame incrementally. The output gives the
origin information in the same format as the porcelain format.
The first line has commit object name, the line number of the
first line in the group in the original file, the line number of
that file in the final image, and number of lines in the group.
Then subsequent lines show the metainformation for the commit
when the commit is shown for the first time, except the filename
information is always shown (we cannot even make it conditional
to -C option as blame always follows the renaming of the file
wholesale).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Back when only handful commands that created commit and tag were
the only users of committer identity information, it made sense
to explicitly call setup_ident() to pre-fill the default value
from the gecos information. But it is much simpler for programs
to make the call automatic when get_ident() is called these days,
since many more programs want to use the information when updating
the reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In the context of reflog output the reflog message is more useful than
the commit message's first line. When relevant the reflog message
will contain that line anyway.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Bill Lear <rael@zopyra.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I did this:
$ git tag -s test-sign
gpg: skipped "Andy Parkins <andyparkins@gmail.com>": secret key not available
gpg: signing failed: secret key not available
failed to sign the tag with GPG.
The problem is that I have used the comment field in my key's UID
definition.
$ gpg --list-keys andy
pub 1024D/4F712F6D 2003-08-14
uid Andy Parkins (Google) <andyparkins@gmail.com>
So when git-tag looks for "Andy Parkins <andyparkins@gmail.com>";
obviously it's not going to be found.
There shouldn't be a requirement that I use the same form of my name in
my git repository and my gpg key - I might want to be formal (Andrew) in
my gpg key and informal (Andy) in the repository. Further I might have
multiple keys in my keyring, and might want to use one that doesn't
match up with the address I use in commit messages.
This patch adds a configuration entry "user.signingkey" which, if
present, will be passed to the "-u" switch for gpg, allowing the tag
signing key to be overridden. If the entry is not present, the fallback
is the original method, which means existing behaviour will continue
untouched.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When on a non-tag commit, git-describe normally outputs descriptions of
the form
v1.0.0-g1234567890
Some scripts (for example the update hook script) might just want to
know the name of the nearest tag, so they then have to do
x=$(git-describe HEAD | sed 's/-g*//')
This is costly, but more importantly is fragile as it is relying on the
output format of git-describe, which we would then have to maintain
forever.
This patch adds support for setting the --abbrev option to zero. In
that case git-describe does as it always has, but outputs only the
nearest found tag instead of a completely unique name. This means that
scripts would not have to parse the output format and won't need
changing if the git-describe suffix is ever changed.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Doing:
$ git checkout HEAD^
Generates the following message:
|warning: you are not on ANY branch anymore.
|If you meant to create a new branch from the commit, you need -b to
|associate a new branch with the wanted checkout. Example:
| git checkout -b <new_branch_name> HEAD^
Of course if the user does as told at this point the created branch
won't be located at the expected commit. Reword this message a bit to
avoid such confusion.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It received the return value from xwrite() in a size_t variable
'written' and expected comparison with 0 would catch an error
from xwrite().
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is necessary for vc-version-other-window. Based on a patch by Sam
Vilain <sam.vilain@catalyst.net.nz>.
Currently, the vc-git-checkout function uses `git checkout' to fetch a
file from the git repository to the working copy. However, it is
completely ignoring the input argument that specifies the destination
file. `git-checkout' does not support specifying this, so we have to
use `git-cat-file', capture the output in a buffer and then save it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It used to throw potentially multi-line log message at reflog.
Just record the heads that were given to be merged at the command
line and the action.
Revert the removal of the check in "git-update-ref -m" I made earlier
which was only a work-around for this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The file format dictates that entries are LF terminated so
the message cannot have one in it. Chomp the message to make
sure it only has a single line if necessary, while removing the
leading whitespace.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Junio added the found variable to enforce commit date order when two
tags have the same distance from the requested commit. Except it is
unnecessary as match_cnt is already used to record how many possible
tags have been identified thus far.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Older Solaris machines lack stdint.h but have inttypes.h.
The standard has inttypes.h including stdint.h, so at worst
this pollutes the namespace a bit.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Document the recommended way to prime a repository with tons of
references with 'pack-refs --all -prune'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The "contains" algorithm runs into an infinite loop if the needle string
has zero length. The loop could be modified to handle this, but it makes
more sense to simply have an empty needle return no matches. Thus, a
command like
git log -S
produces no output.
We place the check at the top of the function so that we get the same
results with or without --pickaxe-regex. Note that until now,
git log -S --pickaxe-regex
would match everything, not nothing.
Arguably, an empty pickaxe string should simply produce an error
message; however, this is still a useful assertion to add to the
algorithm at this layer of the code.
Noticed by Bill Lear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The code that uses committer_info() in reflog can barf and die
whenever it is asked to update a ref. And I do not think
calling ignore_missing_committer_name() upfront like recent
receive-pack did in the aplication is a reasonable workaround.
What the patch does.
- git_committer_info() takes one parameter. It used to be "if
this is true, then die() if the name is not available due to
bad GECOS, otherwise issue a warning once but leave the name
empty". The reason was because we wanted to prevent bad
commits from being made by git-commit-tree (and its
callers). The value 0 is only used by "git var -l".
Now it takes -1, 0 or 1. When set to -1, it does not
complain but uses the pw->pw_name when name is not
available. Existing 0 and 1 values mean the same thing as
they used to mean before. 0 means issue warnings and leave
it empty, 1 means barf and die.
- ignore_missing_committer_name() and its existing caller
(receive-pack, to set the reflog) have been removed.
- git-format-patch, to come up with the phoney message ID when
asked to thread, now passes -1 to git_committer_info(). This
codepath uses only the e-mail part, ignoring the name. It
used to barf and die. The other call in the same program
when asked to add signed-off-by line based on committer
identity still passes 1 to make sure it barfs instead of
adding a bogus s-o-b line.
- log_ref_write in refs.c, to come up with the name to record
who initiated the ref update in the reflog, passes -1. It
used to barf and die.
The last change means that git-update-ref, git-branch, and
commit walker backends can now be used in a repository with
reflog by somebody who does not have the user identity required
to make a commit. They all used to barf and die.
I've run tests and all of them seem to pass, and also tried "git
clone" as a user whose GECOS is empty -- git clone works again
now (it was broken when reflog was enabled by default).
But this definitely needs extra sets of eyeballs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently, the vc-git-checkout function uses `git checkout' to fetch a
file from the git repository to the working copy. However, it is
completely ignoring the input argument that specifies the destination
file. `git-checkout' does not support specifying this, so we have to
use `git-cat-file', capture the output in a buffer and then save it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Do *NOT* try this on a repository you care about:
git pack-refs --all --prune
git pack-refs
because while the first "pack-refs" does the right thing, the second
pack-refs will totally screw you over.
This is because the second one tries to pack only tags; we should
also pack what are already packed -- otherwise we would lose them.
[jc: with an additional test]
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If a repository was checked out via git-cvsserver and then later a new
file is added to the git repository via some other method; a CVS update
wasn't fetching the new file.
It would be reported as a new file as
A some/dir/newfile.c
but would never appear in the directory.
The problem seems to be that git-cvsserver was treating these two cases
identically, as "A" type results.
1. New file in repository
2. New file locally
In fact, traditionally, case 1 is treated as a "U" result, and case 2
only is treated as an "A" result. "A", should just report that the file
is added locally and then skip that file during an update as there is
(of course) nothing to send.
In both these cases there is no working revision, so the checking for
"is there no working revision" will return true. The test for case 2
needs refining to say "if there is no working revision and no upstream
revision". This patch does just that, leaving case 1 to be handled by
the normal "U" handler.
I've also updated the log message to more accurately describe the
operation. i.e. that "A" means that content is scheduled for addition;
not that it actually has been added.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This introduces the config item remote.<name>.uploadpack to override the
default value (which is "git-upload-pack").
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows transfer.unpackLimit to specify what these two
configuration variables want to set.
We would probably want to deprecate the two separate variables,
as I do not see much point in specifying them independently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes git-fetch over git native protocol to automatically
decide to keep the downloaded pack if the fetch results in more
than 100 objects, just like receive-pack invoked by git-push
does. This logic is disabled when --keep is explicitly given
from the command line, so that a very small clone still keeps
the downloaded pack as before.
The 100 threshold can be adjusted with fetch.unpacklimit
configuration. We might want to introduce transfer.unpacklimit
to consolidate the two unpacklimit variables, which will be a
topic for the next patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With --keep-auto option, fetch-pack decides to keep the pack
without exploding it just like receive-pack does.
We may want to later make this the default.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes them consistent with other commands that take the
path to the upload-pack program. We also pass --upload-pack
instead of --exec to the underlying fetch-pack, although it is
not strictly necessary.
[jc: original motivation from Uwe]
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Just some option name disambiguation. This is the counter part to
commit d23842fd which made a similar change for push and send-pack.
--exec continues to work.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We used to get the following confusing error message:
$ git commit --amend -a -m foo
Option -m cannot be combined with -c/-C/-F
This is because --amend cannot be combined with -c/-C/-F, which makes
sense, because they try to handle the same log message in different ways.
So update the documentation to reflect this.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Contrary to variable values, in subsection names parsing character
escape codes (besides literal escaping of " as \", and \ as \\)
is not performed; subsection name cannot contain newlines.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Noticed by Franck Bui-Huu.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A short-hand "-g" for "git log --walk-reflogs" and "git
show-branch --reflog" makes it easier to access the reflog
info.
[jc: added -g to show-branch for symmetry]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Documentation/config.txt:
Variable value ending in a '`\`' is continued on the next line in the
customary UNIX fashion.
Test it.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Commit c1a4278e switched the "merging checkout" implementation
from 3-way read-tree to merge-recursive, but forgot that
merge-recursive will signal an unmerged state with its own exit
status code. This prevented the clean-up phase (paths cleanly
merged should not be updated in the index) from running.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Although unusual, tags can point at any object. Warning only
once is fine, but warning every time about the same tag gets
annoying.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We set the output directory to the git subdirectory prefix if one has
not already been specified. However, in the case of --stdout, we
explicitly _don't_ want the output directory to be set. The result was
that "git-format-patch --stdout" in a directory besides the project root
produced the "standard output, or directory, which one?" error message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Earlier code discarded GIT_AUTHOR_DATE taken from the base
commit when --author was specified. This was often wrong as
that use is likely to fix the spelling of author's name.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Not sure why it was there in the first place, we always do our
work relative to the URL we're connected to; even if that URL is
the root of the repository, so the leading slash is pointless...
Lets be consistent when printing things for the user to see.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We used to call find_pack_entry() twice from read_sha1_file() in order
to avoid printing an error message, when the object did not exist. This
is fixed by moving the call to error() to the only place it really
could be called.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Ren,Ai(B Scharfe
Shawn O. Pearce
Junio C Hamano
Linus Torvalds
Nicolas Pitre
Bill Lear
Andy Parkins
Alexandre Julliard
Jason Riedy
Jeff King
Sam Vilain
Uwe Kleine-König
Alex Riesen
Peter Eriksen
Jakub Narebski
Johannes Schindelin
Junio C Hamano
Eric Wong