| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It's possible for content currently found in one file to
have originated in two separate files, each of which may
have been modified in some single older commit. The
--porcelain output generates an incorrect "previous" header
in this case, whereas --line-porcelain gets it right. The
problem is that the porcelain output tries to omit repeated
details of commits, and treats "previous" as a property of
the commit, when it is really a property of the blamed block
of lines.
Let's look at an example. In a case like this, you might see
this output from --line-porcelain:
SOME_SHA1 1 1 1
author ...
committer ...
previous SOME_SHA1^ file_one
filename file_one
...some line content...
SOME_SHA1 2 1 1
author ...
committer ...
previous SOME_SHA1^ file_two
filename file_two
...some different content....
The "filename" fields tell us that the two lines are from
two different files. But notice that the filename also
appears in the "previous" field, which tells us where to
start a re-blame. The second content line never appeared in
file_one at all, so we would obviously need to re-blame from
file_two (or possibly even some other file, if had just been
renamed to file_two in SOME_SHA1).
So far so good. Now here's what --porcelain looks like:
SOME_SHA1 1 1 1
author ...
committer ...
previous SOME_SHA1^ file_one
filename file_one
...some line content...
SOME_SHA1 2 1 1
filename file_two
...some different content....
We've dropped the author and committer fields from the
second line, as they would just be repeats. But we can't
omit "filename", because it depends on the actual block of
blamed lines, not just the commit. This is handled by
emit_porcelain_details(), which will show the filename
either if it is the first mention of the commit _or_ if the
commit has multiple paths in it.
But we don't give "previous" the same handling. It's written
inside emit_one_suspect_detail(), which bails early if we've
already seen that commit. And so the output above is wrong;
a reader would assume that the correct place to re-blame
line two is from file_one, but that's obviously nonsense.
Let's treat "previous" the same as "filename", and show it
fresh whenever we know we are in a confusing case like this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
You can already ask blame for full sha1s with "-l" or with
"--abbrev=40". But for consistency with other parts of Git,
we should support "--no-abbrev".
Worse, blame already accepts --no-abbrev, but it's totally
broken. When we see --no-abbrev, the abbrev variable is set
to 0, which is then used as a printf precision. For regular
sha1s, that means we print nothing at all (which is very
wrong). For boundary commits we decrement it to "-1", which
printf interprets as "no limit" (which is almost correct,
except it misses the 39-length magic explained in the
previous commit).
Let's detect --no-abbrev and behave as if --abbrev=40 was
given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The blame command internally adds 1 to any requested sha1
abbreviation length, and then subtracts it when outputting a
boundary commit. This lets regular and boundary sha1s line
up visually, but it misses one corner case.
When the requested length is 40, we bump the value to 41.
But since we only have 40 characters, that's all we can show
(fortunately the truncation is done by a printf precision
field, so it never tries to read past the end of the
buffer). So a normal sha1 shows 40 hex characters, and a
boundary sha1 shows "^" plus 40 hex characters. The result
is misaligned.
The "-l" option to show long sha1s gets around this by
skipping the "abbrev" variable entirely and just always
using GIT_SHA1_HEXSZ. This avoids the "+1" issue, but it
does mean that boundary commits only have 39 characters
printed. This is somewhat odd, but it does look good
visually: the results are aligned and left-justified. The
alternative would be to allocate an extra column that would
contain either an extra space or the "^" boundary marker.
As this is by definition the human-readable view, it's
probably not that big a deal either way (and of course
--porcelain, etc, correctly produce correct 40-hex sha1s).
But for consistency, this patch teaches --abbrev=40 to
produce the same output as "-l" (always left-aligned, with
40-hex for normal sha1s, and "^" plus 39-hex for
boundaries).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/common-main:
common-main: stop munging argv[0] path
git-compat-util: move content inside ifdef/endif guards
|
|
Code cleanup.
* tk/diffcore-delta-remove-unused:
diffcore-delta: remove unused parameter to diffcore_count_changes()
|
|
Code clean-up.
* jk/create-branch-remove-unused-param:
create_branch: drop unused "head" parameter
|
|
Typofix.
* nd/worktree-lock:
git-worktree.txt: fix typo "to"/"two", and add comma
|
|
Doc fix.
* ps/common-info-doc:
doc: fix location of 'info/' with $GIT_COMMON_DIR
|
|
Improve the rule to convert "unsigned char [20]" into "struct
object_id *" in contrib/coccinelle/
* rs/cocci:
cocci: avoid self-references in object_id transformations
|
|
Update to the test framework made in 2.9 timeframe broke running
the tests under valgrind, which has been fixed.
* nd/test-helpers:
valgrind: support test helpers
|
|
Documentation fix.
* sc/fmt-merge-msg-doc-markup-fix:
Documentation/fmt-merge-msg: fix markup in example
|
|
Code simplification.
* rs/commit-pptr-simplify:
commit: simplify building parents list
|
|
Documentation fix.
* jk/rebase-config-insn-fmt-docfix:
doc: fix missing "::" in config list
|
|
A trivial clean-up to a recently graduated topic.
* ak/pre-receive-hook-template-modefix:
pre-receive.sample: mark it executable
|
|
Portability update and workaround for builds on recent Mac OS X.
* ls/macos-update:
travis-ci: disable GIT_TEST_HTTPD for macOS
Makefile: set NO_OPENSSL on macOS by default
|
|
Fix for a racy false-positive test failure.
* as/merge-attr-sleep:
t6026: clarify the point of "kill $(cat sleep.pid)"
t6026: ensure that long-running script really is
Revert "t6026-merge-attr: don't fail if sleep exits early"
Revert "t6026-merge-attr: ensure that the merge driver was called"
t6026-merge-attr: ensure that the merge driver was called
t6026-merge-attr: don't fail if sleep exits early
|
|
Recent update to git-sh-setup (a library of shell functions that
are used by our in-tree scripted Porcelain commands) included
another shell library git-sh-i18n without specifying where it is,
relying on the $PATH. This has been fixed to be more explicit by
prefixing $(git --exec-path) output in front.
* ak/sh-setup-dot-source-i18n-fix:
git-sh-setup: be explicit where to dot-source git-sh-i18n from.
|
|
"git daemon" used fixed-length buffers to turn URL to the
repository the client asked for into the server side directory
path, using snprintf() to avoid overflowing these buffers, but
allowed possibly truncated paths to the directory. This has been
tightened to reject such a request that causes overlong path to be
required to serve.
* jk/daemon-path-ok-check-truncation:
daemon: detect and reject too-long paths
|
|
The code that we have used for the past 10+ years to cycle
4-element ring buffers turns out to be not quite portable in
theoretical world.
* rs/ring-buffer-wraparound:
hex: make wraparound of the index into ring-buffer explicit
|
|
"git send-email" attempts to pick up valid e-mails from the
trailers, but people in real world write non-addresses there, like
"Cc: Stable <add@re.ss> # 4.8+", which broke the output depending
on the availability and vintage of Mail::Address perl module.
* mm/send-email-cc-cruft-after-address:
Git.pm: add comment pointing to t9000
t9000-addresses: update expected results after fix
parse_mailboxes: accept extra text after <...> address
|
|
The command-line completion script (in contrib/) learned to
complete "git cmd ^mas<HT>" to complete the negative end of
reference to "git cmd ^master".
* cp/completion-negative-refs:
completion: support excluding refs
|
|
Extract a small helper out of the function that reads the authors
script file "git am" internally uses.
This by itself is not useful until a second caller appears in the
future for "rebase -i" helper.
* jc/am-read-author-file:
am: refactor read_author_script()
|
|
Since 650c44925 (common-main: call git_extract_argv0_path(),
2016-07-01), the argv[0] that is seen in cmd_main() of
individual programs is always the basename of the
executable, as common-main strips off the full path. This
can produce confusing results for git-daemon, which wants to
re-exec itself.
For instance, if the program was originally run as
"/usr/lib/git/git-daemon", it will try just re-execing
"git-daemon", which will find the first instance in $PATH.
If git's exec-path has not been prepended to $PATH, we may
find the git-daemon from a different version (or no
git-daemon at all).
Normally this isn't a problem. Git commands are run as "git
daemon", the git wrapper puts the exec-path at the front of
$PATH, and argv[0] is already "daemon" anyway. But running
git-daemon via its full exec-path, while not really a
recommended method, did work prior to 650c44925. Let's make
it work again.
The real goal of 650c44925 was not to munge argv[0], but to
reliably set the argv0_path global. The only reason it
munges at all is that one caller, the git.c wrapper,
piggy-backed on that computation to find the command
basename. Instead, let's leave argv[0] untouched in
common-main, and have git.c do its own basename computation.
While we're at it, let's drop the return value from
git_extract_argv0_path(). It was only ever used in this one
callsite, and its dual purposes is what led to this
confusion in the first place.
Note that by changing the interface, the compiler can
confirm for us that there are no other callers storing the
return value. But the compiler can't tell us whether any of
the cmd_main() functions (besides git.c) were relying on the
basename munging. However, we can observe that prior to
650c44925, no other cmd_main() functions did that munging,
and no new cmd_main() functions have been introduced since
then. So we can't be regressing any of those cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The delta_limit parameter to diffcore_count_changes() has been unused
since commit ba23bbc8e ("diffcore-delta: make change counter to byte
oriented again.", 2006-03-04).
Remove the parameter and adjust all callers.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ben North <ben@redfrontdoor.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We lengthened the time the leftover process sleeps in the previous
commit to make sure it will be there while 'git merge' runs and
finishes. It therefore needs to be killed before leaving the test.
And it needs to be killed even when 'git merge' fails, so it has to
be triggered via test_when_finished mechanism.
Explain all that in a large comment, and move the use site of
test_when_finished to immediately before 'git merge' invocation,
where the process is spawned.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the introduction of the $GIT_COMMON_DIR variable, the
repository layout manual was changed to reflect the location for
many files in case the variable is set. While adding the new
locations, one typo snuck in regarding the location of the
'info/' folder, which is falsely claimed to reside at
"$GIT_COMMON_DIR/index".
Fix the typo to point to "$GIT_COMMON_DIR/info/" instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When making sure that background tasks are cleaned up in 5babb5b
(t6026-merge-attr: clean up background process at end of test case,
2016-09-07), we considered to let the background task sleep longer, just
to be certain that it will still be running when we want to kill it
after the test.
Sadly, the assumption appears not to hold true that the test case passes
quickly enough to kill the background task within a second.
Simply increase it to an hour. No system can be possibly slow enough to
make above-mentioned assumption incorrect.
Reported by Andreas Schwab.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 734fde2d7167e4b20d2ff6062ade3846949b0741.
The point of the test is that the stray process was still running
when 'git merge' did its thing through its completion, so a failure
to "kill" it means we didn't give a condition to the test to trigger
a possible future breakage. Appending "|| :" to the "kill" is
sweeping a test-bug under the rug.
|
|
This reverts commit c1e0dc59bddce765761a6f863c66ee0cd4b2ca09.
We are not interested in the stray process in the merge driver
started; we want it to be still around.
|
|
Explicitly check for the existence of the pid file to test that the
merge driver was actually called.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
TravisCI changed their default macOS image from 10.10 to 10.11 [1].
Unfortunately the HTTPD tests do not run out of the box using the
pre-installed Apache web server anymore. Therefore we enable these
tests only for Linux and disable them for macOS.
[1] https://blog.travis-ci.com/2016-10-04-osx-73-default-image-live/
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apple removed the OpenSSL header files in macOS 10.11 and above. OpenSSL
was deprecated since macOS 10.7.
Set `NO_OPENSSL` and `APPLE_COMMON_CRYPTO` to `YesPlease` as default for
macOS. It is possible to override this and use OpenSSL by defining
`NO_APPLE_COMMON_CRYPTO`.
Original-patch-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function used to have the caller pass in the current
value of HEAD, in order to make sure we didn't clobber HEAD.
In 55c4a6730, that logic moved to validate_new_branchname(),
which just resolves HEAD itself. The parameter to
create_branch is now unused.
Since we have to update and re-wrap the docstring describing
the parameters anyway, let's take this opportunity to break
it out into a list, which makes it easier to find the
parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 5babb5bdb3 ("t6026-merge-attr: clean up background process at end
of test case") added a kill command to clean up after the test, but this
can fail if the sleep command exits before the cleanup is executed.
Ignore the error from the kill command.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Jeff King <peff@peff.net>
|
|
The object_id functions oid_to_hex, oid_to_hex_r, oidclr, oidcmp, and
oidcpy are defined as wrappers of their legacy counterparts sha1_to_hex,
sha1_to_hex_r, hashclr, hashcmp, and hashcpy, respectively. Make sure
that the Coccinelle transformations for converting legacy function calls
are not applied to these wrappers themselves, which would result in
tautological declarations.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
d323c6b641 ("i18n: git-sh-setup.sh: mark strings for translation",
2016-06-17) started to dot-source git-sh-i18n shell script library,
assuming that $PATH is already adjusted for our scripts, namely,
$GIT_EXEC_PATH is at the beginning of $PATH.
Old contrib scripts like contrib/convert-grafts-to-replace-refs.sh
and contrib/rerere-train.sh and third-party scripts like guilt may
however be using this as ". $(git --exec-path)/git-sh-setup",
without satisfying that assumption. Be more explicit by specifying
its path prefixed with "$(git --exec-path)/". to be safe.
While we’re here, move the sourcing of git-sh-i18n below the shell
portability fixes.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Push pptr down into the FROM_MERGE branch of the if/else statement,
where it's actually used, and call commit_list_append() for appending
elements instead of playing tricks with commit_list_insert(). Call
copy_commit_list() in the amend branch instead of open-coding it. Don't
bother setting pptr in the final branch as it's not used thereafter.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rebase.instructionFormat option is missing its "::" to
tell AsciiDoc that it's a list entry. As a result, the
option name gets lumped into the description in one big
paragraph.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For consistency with other hooks, make the sample hook executable.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test clean-up.
* pb/test-parse-options-expect:
t0040: convert all possible tests to use `test-parse-options --expect`
|
|
Code cleanup.
* jc/cocci-xstrdup-or-null:
cocci: refactor common patterns to use xstrdup_or_null()
|
|
Code cleanup.
* rs/cocci:
use strbuf_add_unique_abbrev() for adding short hashes, part 3
remove unnecessary NULL check before free(3)
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
|
|
A bit more comments in a tricky code.
* jc/diff-unique-abbrev-comments:
diff_unique_abbrev(): document its assumption and limitation
|
|
Small doc update.
* rs/pretty-format-color-doc-fix:
pretty: fix document link for color specification
|
|
Message fix-up.
* js/reset-usage:
reset: fix usage
|
|
Some AsciiDoc formatter mishandles a displayed illustration with
tabs in it. Adjust a few of them in merge-base documentation to
work around them.
* po/fix-doc-merge-base-illustration:
doc: fix the 'revert a faulty merge' ASCII art tab spacing
doc: fix merge-base ASCII art tab spacing
|
|
The Travis CI configuration we ship ran the tests with --verbose
option but this risks non-TAP output that happens to be "ok" to be
misinterpreted as TAP signalling a test that passed. This resulted
in unnecessary failure. This has been corrected by introducing a
new mode to run our tests in the test harness to send the verbose
output separately to the log file.
* jk/tap-verbose-fix:
test-lib: bail out when "-v" used under "prove"
travis: use --verbose-log test option
test-lib: add --verbose-log option
test-lib: handle TEST_OUTPUT_DIRECTORY with spaces
|
Jeff King
Junio C Hamano
Tobias Klauser
Ben North
Johannes Sixt
Patrick Steinhardt
Johannes Schindelin
Andreas Schwab
Lars Schneider
René Scharfe
Anders Kaseorg