| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's use the 'struct packet_writer writer'
field from 'struct upload_pack_data' in receive_needs(),
instead of a local 'struct packet_writer writer' variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass 'struct upload_pack_data' to
receive_needs(), so that this function and the functions it
calls can use all the fields of that struct in followup commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's pass 'struct upload_pack_data' to
get_common_commits(), so that this function and the functions
it calls can use all the fields of that struct in followup
commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's use 'struct upload_pack_data' in
upload_pack().
This will make it possible in followup commits to remove a lot
of static variables and local variables that have the same name
and purpose as fields in 'struct upload_pack_data'. This will
also make upload_pack() work in a more similar way as
upload_pack_v2().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move 'struct upload_pack_data' and the
related upload_pack_data_init() and upload_pack_data_clear()
functions towards the beginning of the file, so that this struct
and its related functions can then be used by upload_pack() in a
followup commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's move the want_obj and have_obj object
arrays into 'struct upload_pack_data'.
These object arrays are used by both upload_pack() and
upload_pack_v2(), for example when these functions call
create_pack_file(). We are going to use
'struct upload_pack_data' in upload_pack() in a followup
commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we cleanup 'upload-pack.c' by using 'struct upload_pack_data'
more thoroughly, let's remove 'struct object_array wants' from
'struct upload_pack_data', as it appears to be unused.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach codepaths that show progress meter to also use the
start_progress() and the stop_progress() calls as a "region" to be
traced.
* es/trace-log-progress:
trace2: log progress time and throughput
|
|
Test fix for a topic already in 'master' and meant for 'maint'.
* jt/t5500-unflake:
t5500: count objects through stderr, not trace
|
|
"git multi-pack-index repack" has been taught to honor some
repack.* configuration variables.
* sn/midx-repack-with-config:
multi-pack-index: respect repack.packKeptObjects=false
midx: teach "git multi-pack-index repack" honor "git repack" configurations
|
|
Code cleanup and typofixes
* ds/bloom-cleanup:
completion: offer '--(no-)patch' among 'git log' options
bloom: use num_changes not nr for limit detection
bloom: de-duplicate directory entries
Documentation: changed-path Bloom filters use byte words
bloom: parse commit before computing filters
test-bloom: fix usage typo
bloom: fix whitespace around tab length
|
|
"git fsck" ensures that the paths recorded in tree objects are
sorted and without duplicates, but it failed to notice a case where
a blob is followed by entries that sort before a tree with the same
name. This has been corrected.
* rs/fsck-duplicate-names-in-trees:
fsck: report non-consecutive duplicate names in trees
|
|
"git p4" learned to recover from a (broken) state where a directory
and a file are recorded at the same path in the Perforce repository
the same way as their clients do.
* ao/p4-d-f-conflict-recover:
git-p4: recover from inconsistent perforce history
|
|
"rebase -i" segfaulted when rearranging a sequence that has a
fix-up that applies another fix-up (which may or may not be a
fix-up of yet another step).
* js/rebase-autosquash-double-fixup-fix:
rebase --autosquash: fix a potential segfault
|
|
Doc update.
* jc/codingstyle-compare-with-null:
CodingGuidelines: do not ==/!= compare with 0 or '\0' or NULL
|
|
"git bisect replay" had trouble with input files when they used
CRLF line ending, which has been corrected.
* cw/bisect-replay-with-dos:
bisect: allow CRLF line endings in "git bisect replay" input
|
|
"git bugreport" learned to report enabled hooks in the repository.
* es/bugreport-with-hooks:
bugreport: collect list of populated hooks
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Serving a "git fetch" client over "git://" and "ssh://" protocols
using the on-wire protocol version 2 was buggy on the server end
when the client needs to make a follow-up request to
e.g. auto-follow tags.
* cc/upload-pack-v2-fetch-fix:
upload-pack: clear filter_options for each v2 fetch command
|
|
The code to skip unmerged paths in the index when sparse checkout
is in use would have made out-of-bound access of the in-core index
when the last path was unmerged, which has been corrected.
* ds/sparse-updates-oob-access-fix:
unpack-trees: avoid array out-of-bounds error
|
|
Rewriting various parts of "git submodule" in C continues.
* ss/submodule-set-url-in-c:
submodule: port subcommand 'set-url' from shell to C
|
|
Code clean-up.
* dd/bloom-sparse-fix:
bloom: fix `make sparse` warning
|
|
Instead of always building all branches at GitHub via Actions,
users can specify which branches to build.
* jk/ci-only-on-selected-branches:
ci: allow per-branch config for GitHub Actions
|
|
Random bits of FAQ.
* ss/faq-fetch-pull:
gitfaq: fetching and pulling a repository
|
|
Random bits of FAQ.
* ss/faq-ignore:
gitfaq: files in .gitignore are tracked
|
|
Teach "am", "commit", "merge" and "rebase", when they are run with
the "--quiet" option, to pass "--quiet" down to "gc --auto".
* jc/auto-gc-quiet:
auto-gc: pass --quiet down from am, commit, merge and rebase
auto-gc: extract a reusable helper from "git fetch"
|
|
Minor in-code comments and documentation updates around credential
API.
* cb/credential-doc-fixes:
credential: document protocol updates
credential: update gitcredentials documentation
credential: correct order of parameters for credential_match
credential: update description for credential_from_url_gently
|
|
The object walk with object filter "--filter=tree:0" can now take
advantage of the pack bitmap when available.
* tb/bitmap-walk-with-tree-zero-filter:
pack-bitmap: pass object filter to fill-in traversal
pack-bitmap.c: support 'tree:0' filtering
pack-bitmap.c: make object filtering functions generic
list-objects-filter: treat NULL filter_options as "disabled"
|
|
Code cleanup.
* tb/shallow-cleanup:
shallow: use struct 'shallow_lock' for additional safety
shallow.h: document '{commit,rollback}_shallow_file'
shallow: extract a header file for shallow-related functions
commit: make 'commit_graft_pos' non-static
|
|
Rather than teaching only one operation, like 'git fetch', how to write
down throughput to traces, we can learn about a wide range of user
operations that may seem slow by adding tooling to the progress library
itself. Operations which display progress are likely to be slow-running
and the kind of thing we want to monitor for performance anyways. By
showing object counts and data transfer size, we should be able to
make some derived measurements to ensure operations are scaling the way
we expect.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As diff_tree_oid() computes a diff, it will terminate early if the
total number of changed paths is strictly larger than max_changes.
This includes the directories that changed, not just the file paths.
However, only the file paths are reflected in the resulting diff
queue's "nr" value.
Use the "num_changes" from diffopt to check if the diff terminated
early. This is incredibly important, as it can result in incorrect
filters! For example, the first commit in the Linux kernel repo
reports only 471 changes, but since these are nested inside several
directories they expand to 513 "real" changes, and in fact the
total list of changes is not reported. Thus, the computed filter
for this commit is incorrect.
Demonstrate the subtle difference by using one fewer file change
in the 'get bloom filter for commit with 513 changes' test. Before,
this edited 513 files inside "bigDir" which hit this inequality.
However, dropping the file count by one demonstrates how the
previous inequality was incorrect but the new one is correct.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When computing a changed-path Bloom filter, we need to take the
files that changed from the diff computation and extract the parent
directories. That way, a directory pathspec such as "Documentation"
could match commits that change "Documentation/git.txt".
However, the current code does a poor job of this process. The paths
are added to a hashmap, but we do not check if an entry already
exists with that path. This can create many duplicate entries and
cause the filter to have a much larger length than it should. This
means that the filter is more sparse than intended, which helps the
false positive rate, but wastes a lot of space.
Properly use hashmap_get() before hashmap_add(). Also be sure to
include a comparison function so these can be matched correctly.
This has an effect on a test in t0095-bloom.sh. This makes sense,
there are ten changes inside "smallDir" so the total number of
paths in the filter should be 11. This would result in 11 * 10 bits
required, and with 8 bits per byte, this results in 14 bytes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In Documentation/technical/commit-graph-format.txt, the definition
of the BIDX chunk specifies the length is a number of 8-byte words.
During development we discovered that using 8-byte words in the
Murmur3 hash algorithm causes issues with big-endian versus little-
endian machines. Thus, the hash algorithm was adapted to work on a
byte-by-byte basis. However, this caused a change in the definition
of a "word" in bloom.h. Now, a "word" is a single byte, which allows
filters to be as small as two bytes. These length-two filters are
demonstrated in t0095-bloom.sh, and a larger filter of length 25 is
demonstrated as well.
The original point of using 8-byte words was for alignment reasons.
It also presented opportunities for extremely sparse Bloom filters
when there were a small number of changes at a commit, creating a
very low false-positive rate. However, modifying the format at this
point is unlikely to be a valuable exercise. Also, this use of
single-byte granularity does present opportunities to save space.
It is unclear if 8-byte alignment of the filters would present any
meaningful performance benefits.
Modify the format document to reflect reality.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When computing changed-path Bloom filters for a commit, we need to
know if the commit has a parent or not. If the commit is not parsed,
then its parent pointer will be NULL.
As far as I can tell, the only opportunity to reach this code
without parsing the commit is inside "test-tool bloom
get_filter_for_commit" but it is best to be safe.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tree entries are sorted in path order, meaning that directory names get
a slash ('/') appended implicitly. Git fsck checks if trees contains
consecutive duplicates, but due to that ordering there can be
non-consecutive duplicates as well if one of them is a directory and the
other one isn't. Such a tree cannot be fully checked out.
Find these duplicates by recording candidate file names on a stack and
check candidate directory names against that stack to find matches.
Suggested-by: Brandon Williams <bwilliamseng@gmail.com>
Original-test-by: Brandon Williams <bwilliamseng@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Perforce allows you commit files and directories with the same name,
so you could have files //depot/foo and //depot/foo/bar both checked
in. A p4 sync of a repository in this state fails. Deleting one of
the files recovers the repository.
When this happens we want git-p4 to recover in the same way as
perforce.
Note that Perforce has this change in their 2017.1 version:
Bugs fixed in 2017.1
#1489051 (Job #2170) **
Submitting a file with the same name as an existing depot
directory path (or vice versa) will now be rejected.
so people hopefully will not creating damaged Perforce repos
anymore, but "git p4" needs to be able to interact with already
corrupt ones.
Signed-off-by: Andrew Oakley <andrew@adoakley.name>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When selecting a batch of pack-files to repack in the "git
multi-pack-index repack" command, Git should respect the
repack.packKeptObjects config option. When false, this option says that
the pack-files with an associated ".keep" file should not be repacked.
This config value is "false" by default.
There are two cases for selecting a batch of objects. The first is the
case where the input batch-size is zero, which specifies "repack
everything". The second is with a non-zero batch size, which selects
pack-files using a greedy selection criteria. Both of these cases are
updated and tested.
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the "repack" subcommand of "git multi-pack-index" command
creates new packfile(s), it does not call the "git repack"
command but instead directly calls the "git pack-objects"
command, and the configuration variables meant for the "git
repack" command, like "repack.usedaeltabaseoffset", are ignored.
Check the configuration variables used by "git repack" ourselves
in "git multi-index-pack" and pass the corresponding options to
underlying "git pack-objects".
Note that `repack.writeBitmaps` configuration is ignored, as the
pack bitmap facility is useful only with a single packfile.
Signed-off-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rearranging the todo list so that the fixups/squashes are reordered
just after the commits they intend to fix up, we use two arrays to
maintain that list: `next` and `tail`.
The idea is that `next[i]`, if set to a non-negative value, contains the
index of the item that should be rearranged just after the `i`th item.
To avoid having to walk the entire `next` chain when appending another
fixup/squash, we also store the end of the `next` chain in `tail[i]`.
The logic we currently use to update these array items is based on the
assumption that given a fixup/squash item at index `i`, we just found
the index `i2` indicating the first item in that fixup chain.
However, as reported by Paul Ganssle, that need not be true: the special
form `fixup! <commit-hash>` is allowed to point to _another_ fixup
commit in the middle of the fixup chain.
Example:
* 0192a To fixup
* 02f12 fixup! To fixup
* 03763 fixup! To fixup
* 04ecb fixup! 02f12
Note how the fourth commit targets the second commit, which is already a
fixup that targets the first commit.
Previously, we would update `next` and `tail` under our assumption that
every `fixup!` commit would find the start of the `fixup!`/`squash!`
chain. This would lead to a segmentation fault because we would actually
end up with a `next[i]` pointing to a `fixup!` but the corresponding
`tail[i]` pointing nowhere, which would the lead to a segmentation
fault.
Let's fix this by _inserting_, rather than _appending_, the item. In
other words, if we make a given line successor of another line, we do
not simply forget any previously set successor of the latter, but make
it a successor of the former.
In the above example, at the point when we insert 04ecb just after
02f12, 03763 would already be recorded as a successor of 04ecb, and we
now "squeeze in" 04ecb.
To complete the idea, we now no longer assume that `next[i]` pointing to
a line means that `last[i]` points to a line, too. Instead, we extend
the concept of `last` to cover also partial `fixup!`/`squash!` chains,
i.e. chains starting in the middle of a larger such chain.
In the above example, after processing all lines, `last[0]`
(corresponding to 0192a) would point to 03763, which indeed is the end
of the overall `fixup!` chain, and `last[1]` (corresponding to 02f12)
would point to 04ecb (which is the last `fixup!` targeting 02f12, but it
has 03763 as successor, i.e. it is not the end of overall `fixup!`
chain).
Reported-by: Paul Ganssle <paul@ganssle.io>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent change to show files and line numbers of a breakage during
test (only available when running the tests with bash) were hurting
other shells with syntax errors, which has been corrected.
* cb/test-bash-lineno-fix:
t/test_lib: avoid naked bash arrays in file_lineno
|
|
The basic test did not honor $TEST_SHELL_PATH setting, which has
been corrected.
* cb/t0000-use-the-configured-shell:
t/t0000-basic: make sure subtests also use TEST_SHELL_PATH
|
|
Doc update.
* bc/doc-credential-helper-value:
docs: document credential.helper allowed values
|
|
Doc update.
* dl/doc-stash-remove-mention-of-reflog:
Doc: reference the "stash list" in autostash docs
|
|
The <stdlib.h> header on NetBSD brings in its own definition of
hmac() function (eek), which conflicts with our own and unrelated
function with the same name. Our function has been renamed to work
around the issue.
* cb/avoid-colliding-with-netbsd-hmac:
builtin/receive-pack: avoid generic function name hmac()
|
|
"git restore --staged --worktree" now defaults to take the contents
out of "HEAD", instead of erring out.
* es/restore-staged-from-head-by-default:
restore: default to HEAD when combining --staged and --worktree
|
|
The coding guideline for shell scripts instructed to refer to a
variable with dollar-sign inside arithmetic expansion to work
around a bug in old versions of dash, which is a thing of the past.
Now we are not forbidden from writing $((var+1)).
* jk/arith-expansion-coding-guidelines:
CodingGuidelines: drop arithmetic expansion advice to use "$x"
|
|
The sparse-checkout patterns have been forbidden from excluding all
paths, leaving an empty working tree, for a long time. This
limitation has been lifted.
* ds/sparse-allow-empty-working-tree:
sparse-checkout: stop blocking empty workdirs
|
Christian Couder
Junio C Hamano
Emily Shaffer
SZEDER Gábor
Derrick Stolee
René Scharfe
Andrew Oakley
Son Luong Ngoc
Johannes Schindelin