| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "patch" parameter used to include leading '+' of an added
line in the patch, and the array was treated as 1-based. Make
it accept the contents of the line alone and simplify the code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function apply_line() changed its behaviour depending on the
ws_error_action, whitespace_error and if the input was a context.
Make its caller responsible for such checking so that we can convert
the function to copy the contents of line while fixing whitespace
breakage more easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We had two pointer variables pointing to the same buffer and an
integer variable used to index into its tail part that was
active (old, oldlines and oldsize for the preimage, and their
'new' counterparts for the postimage).
To help readability, use 'oldlines' as the allocated pointer,
and use 'old' as the pointer to the tail that advances while the
code builds up the contents in the buffer. The size 'oldsize'
can be computed as (old-oldines).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This updates the way preimage and postimage in a patch hunk is
parsed and prepared for applying. By looking at image->line[n].flag,
the code can tell if it is a common context line that is the
same between the preimage and the postimage.
This matters when we actually start applying a patch with
contexts that have whitespace breakages that have already been
fixed in the target file.
|
|
Wnen the caller knows the hunk needs to match at the beginning
or at the end, there is no point starting from the line number
that is found in the patch and trying match with increasing
offset. The logic to find matching lines was made more line
oriented with the previous patch and this optimization is now
trivial.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes the way git-apply internally works to be more line
oriented. The logic to find where the patch applies with offset
used to count line numbers by always counting LF from the
beginning of the buffer, but it is simplified because we count
the line length of the target file and the preimage snippet
upfront now.
The ultimate motivation is to allow applying patches
whose preimage context has whitespace corruption that has
already been corrected in the local copy. For that purpose, we
introduce a table of line-hash that allows us to match lines
that differ only in whitespaces.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This moves the logic to force match at the beginning and/or at
the end of the buffer to the actual function that finds the
match from its caller. This is a necessary preparation for the
next step to allow matching disregarding certain differences,
such as whitespace changes.
We probably could optimize this even more by taking advantage of
the fact that match_beginning and match_end forces the match to
be at an exact location (anchored at the beginning and/or the
end), but that's for another commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This restructures code to find matching location with offset
in find_offset() function, so that there is need for only one
call site of match_fragment() function. There still isn't a
change in the logic of the program.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This moves three "if" conditions out of line from find_offset()
function, which is responsible for finding the matching place in
the preimage to apply the patch. There is no change in the
logic of the program.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Jakub Narebski <jnareb@gmail.com> wrote Sun, Feb 03, 2008:
> Junio C Hamano wrote:
> > Jakub Narebski <jnareb@gmail.com> writes:
> >
> > [From] http://thread.gmane.org/gmane.comp.version-control.git/53457/focus=53458
> Julian Phillips:
> > Are you using docbook xsl 1.72? There are known problems building the
> > manpages with that version. 1.71 works, and 1.73 should work when it get
> > released.
I was able to solve this problem with this patch, which adds a XSL file
used specifically for DOCBOOK_XSL_172=YesPlease and where dots and
backslashes are escaped properly so they won't be substituted to the
wrong thing further down the "DocBook XSL pipeline". Doing the escaping
in the existing callout.xsl breaks v1.70.1. Hopefully v1.73 will end
this part of the manpage nightmare.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When DEFAULT_GIT_TEMPLATE_DIR is specified as a relative path,
init-db made it relative to exec_path using prefix_path(), which
is wrong. prefix_path() is about a file inside the work tree.
There was a similar misuse in config.c that takes relative
ETC_GITCONFIG path.
A convenience function prefix_filename() can concatenate two paths
to form a path that points at somewhere outside the work tree.
Use it in these codepaths instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
functions
In the case of an malformed object, the object specific parsing functions
would return an error, which is currently ignored. The object can be partial
initialized in this case.
This patch make parse_object_buffer propagate such errors.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A zero commit date could be caused by:
* a missing author line
* a missing commiter line
* a malformed email address in the commiter line
* a malformed commit date
Simply reporting it as zero commit date is missleading.
Additionally, it upgrades the message to an error (instead of an printf).
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-remote documentation: fix synopsis to match description
git-am: fix type in its usage string
|
|
In the text, the argument of -m is <master> which should be used in the
command synopsis, too.
Signed-off-by: Jörg Sommer <joerg@alea.gnuu.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jörg Sommer <joerg@alea.gnuu.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The regexp "$," can't match anything. Clearly not intended.
This was introduced in ce6f33c8 which is quite a while ago.
Signed-off-by: Tommy Thorn <tommy-git@thorn.ws>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let "git svn" run "git gc --auto" every 1000 imported commits to
reduce the number of loose objects.
To handle the common use case of frequent imports, where each
invocation typically fetches much less than 1000 commits, also run gc
unconditionally at the end of the import.
"1000" is the same number that was used by default when we called
git-repack. It isn't necessarily still the best choice.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a moment, we'll start calling git-gc --auto instead, since it is a
better fit to what we're trying to accomplish.
The command line options are still accepted, but don't have any
effect, and we warn the user about that.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rebase"
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
Don't ask any questions when submitting, behave similar to git-svn dcommit.
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
This patch removes the '$Keyword: ...$' '...' data, so that files
don't have spurious megre conflicts between branches.
Handles both +ko and +k styles, and leaves the '$Foo$' in
the original file.
Signed-off-by: Simon Hausmann <simon@lst.de>
|
|
* maint:
Fix "git-commit -C $tag"
Documentation/git-stash.txt: Adjust SYNOPSIS command syntax (2)
|
|
The scripted version might not have handled this correctly
either, but the version rewritten in C definitely does not grok
this and complains $tag is not a commit object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the command syntax to better reflect the call parameters:
[save] [message...] => [save [<message>]].
Signed-off-by: Jari Aalto <jari.aalto AT cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the absolute minimum (and reliable) reproduction recipe
to demonstrate that revision range in a history with clock skew
sometimes fails to mark UNINTERESTING commit in topologically
early parts of the history.
The history looks like this:
o---o---o---o
one four
but one has the largest timestamp. "git rev-list four..one"
fails to notice that "one" should not be emitted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we have known breakages, we still said "passed all N
test(s)", which was a bit funny.
This rewords it to read "passed all remaining N test(s)" in such
a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This could have been part of the 1.5.4 commit, but it isn't.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because ':/substring' extended SHA1 expression cannot take
postfix modifiers such as ^{tree} and ^{commit}, we would need
to do it in multiple steps. With the patch, you can start a new
branch from a randomly-picked commit whose message has the named
string in it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
optional"
This reverts commit c41b439244c51b30c60953192816afc91e552578, as
we decided to default to HEAD when revision parameters are missing
and they are no longer mandatory.
|
|
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
filter-branch previously took the first non-option argument as the name for
a new branch. Since dfd05e38, it now takes a revision or a revision range
and modifies the current branch. Update to operate on HEAD by default to
conform with standard git interface practice.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We only care about getting what should be an empty string and
sending it to a file, without a trailing LF, so the empty string
translates into a 0 byte file. Earlier when I originally wrote
these lines Mac OS X allowed the format string of printf to be
the empty string, but more recent versions appear to have been
'improved' with error messages if the format is not given.
This may cause problems if we ever wind up with changes to the hook
tests. A minor cleanup makes the test more safe on all systems,
by conforming to accepted printf conventions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the first things filter-branch does is to create a temporary
directory. This directory is eventually removed by the script during
normal operation, but is not removed if the script encounters an error.
Set a trap to remove it when the script terminates for any reason.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-relink is intended to search for packs and loose objects in
common between two repositories and to replace the one set with
hard links to the other. Files other than packs and loose objects
should not be touched, so add the "info" sub-directory to the
pattern of directory excludes.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Bruno Ribas <ribas@c3sl.ufpr.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Those two configuration variables are important enough that it is
worth to explicitely write about them in the "Gitweb config file
variables" section even if they are usually set during build by
GITWEB_PROJECTROOT and GITWEB_LIST build (Makefile) configuration
variables.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git reflog expire --all" opened a directory in $GIT_DIR/logs/,
read reflog files in there readdir(3), and rewrote the file by
creating a new file and renaming it back inside the loop. This
code structure can cause the newly created file to be returned
by subsequent call to readdir(3), and fall into an infinite loop
in the worst case.
This separates the processing to two phase. Running
for_each_reflog() to find out and collect all refs, and then
iterate over them, calling expire_reflog(). This way, the
program would behave exactly the same way as if all the refs
were given by the user from the command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the commit message, or commit author contains non-ascii, it must be
converted from Perl internal representation to utf-8, to follow what
got declared in HTTP header. Use to_utf8() to do the conversion.
This necessarily replaces here-doc with "print" statements.
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Acked-by: İsmail Dönmez <ismail@pardus.org.tr>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jonas Fonseca
James Bowes
Daniel Barkalow
Martin Koegler
Jörg Sommer
Tommy Thorn
Karl Hasselström
Simon Hausmann
Jason McMullan
Jari Aalto
Michele Ballabio
Miklos Vajna
Jean-Luc Herren
Brandon Casey
Shawn O. Pearce
Bruno Ribas
Jakub Narebski
Jim Meyering
Yasushi SHOJI
Christian Couder