| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Depending on how gpg was built, it may issue the following
message to stderr when run:
Warning: using insecure memory!
When the test is collecting gpg output it is therefore not
enough to just match on a "gpg: " prefix it must also match
on a "Warning: " prefix wherever it needs to match lines
that have been produced by gpg.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This mixes the "git verify-commit" tests in with the "git show
--show-signature" tests, to keep the tests more readable.
The tests already mix in the "call show" tests with the "verify" tests.
So in case of a test beakage, a '-v' run would be needed to reveal the
exact point of breakage anyway.
Additionally, test the actual output of "git verify-commit" and "git
show --show-signature" and compare to "git cat-file".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t7510 uses for loops in a subshell, which need to make sure that the test
returns with the appropriate error code from within the loop.
Restructure the loops as the usual && chains with a single point of
"exit 1" at the end of the loop to make this clearer.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit signatures can be verified using "git show -s --show-signature"
or the "%G?" pretty format and parsing the output, which is well suited
for user inspection, but not for scripting.
Provide a command "verify-commit" which is analogous to "verify-tag": It
returns 0 for good signatures and non-zero otherwise, has the gpg output
on stderr and (optionally) the commit object on stdout, sans the
signature, just like "verify-tag" does.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In contrast to tag signatures, commit signatures are put into the
header, that is between the other header parts and commit messages.
Provide access to the commit content sans the signature, which is the
payload that is actually signed. Commit signature verification does the
parsing anyways, and callers may wish to act on or display the commit
object sans the signature.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The struct has been growing members whose malloced memory needs to be
freed. Do this with one helper function so that no malloced memory shall
be left unfreed.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ss/howto-manage-trunk:
How to keep a project's canonical history correct.
|
|
* mc/git-p4-prepare-p4-only:
git-p4: Do not include diff in spec file when just preparing p4
|
|
* jn/test-lint-unmoor:
test-lint: find unportable sed, echo, test, and export usage after &&
|
|
* ep/shell-assign-and-export-vars:
scripts: more "export VAR=VALUE" fixes
scripts: "export VAR=VALUE" construct is not portable
|
|
* jj/command-line-adjective:
Documentation: use "command-line" when used as a compound adjective, and fix other minor grammatical issues
|
|
* jc/coding-guidelines:
CodingGuidelines: avoid "test <cond> -a/-o <cond>"
CodingGuidelines: on splitting a long line
CodingGuidelines: on comparison
CodingGuidelines: do not call the conditional statement "if()"
CodingGuidelines: give an example for shell function preamble
CodingGuidelines: give an example for control statements
CodingGuidelines: give an example for redirection
CodingGuidelines: give an example for case/esac statement
CodingGuidelines: once it is in, it is not worth the code churn
|
|
* nd/status-auto-comment-char:
commit: allow core.commentChar=auto for character auto selection
config: be strict on core.commentChar
|
|
* mt/rebase-i-keep-empty-test:
rebase --keep-empty -i: add test
|
|
* mk/show-s-no-extra-blank-line-for-merges:
git-show: fix 'git show -s' to not add extra terminator after merge commit
|
|
* sk/spawn-less-case-insensitively-from-grep-O-i:
git grep -O -i: if the pager is 'less', pass the '-I' option
|
|
* jd/subtree:
contrib/subtree: allow adding an annotated tag
contrib/subtree/Makefile: clean up rule for "clean"
contrib/subtree/Makefile: clean up rules to generate documentation
contrib/subtree/Makefile: s/libexecdir/gitexecdir/
contrib/subtree/Makefile: use GIT-VERSION-FILE
contrib/subtree/Makefile: scrap unused $(gitdir)
|
|
* wk/doc-clarify-upstream:
Documentation: mention config sources for @{upstream}
|
|
Update the logic to compute the display width needed for utf8
strings and allow us to more easily maintain the tables used in
that logic.
We may want to let the users choose if codepoints with ambiguous
widths are treated as a double or single width in a follow-up patch.
* tb/unicode-6.3-zero-width:
utf8: make it easier to auto-update git_wcwidth()
utf8.c: use a table for double_width
|
|
* jk/index-pack-report-missing:
index-pack: distinguish missing objects from type errors
|
|
If a file contained CRLF line endings in a repository with
core.autocrlf=input, then blame always marked lines as "Not
Committed Yet", even if they were unmodified.
* bc/blame-crlf-test:
blame: correctly handle files regardless of autocrlf
|
|
* sk/submodules-absolute-path-on-windows:
Revert "submodules: fix ambiguous absolute paths under Windows"
|
|
"git blame" has been optimized greatly by reorganising the data
structure that is used to keep track of the work to be done, thanks
to David Karstrup <dak@gnu.org>.
* dk/blame-reorg:
blame: large-scale performance rewrite
|
|
* wg/svn-fe-style-fixes:
svn-fe: conform to pep8
|
|
Spring cleaning of contrib/.
* jn/contrib-remove-vim:
contrib: remove vim support instructions
|
|
Spring cleaning of contrib/.
* jn/contrib-remove-diffall:
contrib: remove git-diffall
|
|
On a case insensitive filesystem, merge-recursive incorrectly
deleted the file that is to be renamed to a name that is the same
except for case differences.
* dt/merge-recursive-case-insensitive:
mv: allow renaming to fix case on case insensitive filesystems
merge-recursive.c: fix case-changing merge bug
|
|
* rs/reflog-exists:
checkout.c: use ref_exists instead of file_exist
refs.c: add new functions reflog_exists and delete_reflog
|
|
* tg/tag-state-tag-name-in-editor-hints:
builtin/tag.c: show tag name to hint in the message editor
|
|
* jk/grep-tell-run-command-to-cd-when-running-pager:
grep: use run-command's "dir" option for --open-files-in-pager
|
|
* fc/status-printf-squelch-format-zero-length-warnings:
silence a bunch of format-zero-length warnings
|
|
* jk/squelch-compiler-warning-from-funny-error-macro:
let clang use the constant-return error() macro
inline constant return from error() function
|
|
The `core.deltabasecachelimit` used to default to 16 MiB , but this
proved to be too small, and has been bumped to 96 MiB.
* dk/raise-core-deltabasecachelimit:
Bump core.deltaBaseCacheLimit to 96m
|
|
* tl/relax-in-poll-emulation:
compat/poll: sleep 1 millisecond to avoid busy wait
|
|
Document a known breakage with a test.
* jk/utf8-switch-between-nfd-and-nfc:
t3910: show failure of core.precomposeunicode with decomposed filenames
|
|
"git imap-send" learns to ask the credential helper for
authentication material.
* da/imap-send-use-credential-helper:
imap-send: use git-credential
|
|
We used to unconditionally disable the pager in the pager process
we spawn to feed out output, but that prevented people who want to
run "less" within "less" from doing so.
* je/pager-do-not-recurse:
pager: do allow spawning pager recursively
|
|
"git commit --allow-empty-message -C $commit" did not work when the
commit did not have any log message.
* jk/commit-C-pick-empty:
commit: do not complain of empty messages from -C
|
|
Since the very beginning of Git, we gave the LESS environment a
default value "FRSX" when we spawn "less" as the pager. "S" (chop
long lines instead of wrapping) has been removed from this default
set of options, because it is more or less a personal taste thing,
as opposed to others that have good justifications (i.e. "R" is very
much justified because many kinds of output we produce are colored
and "FX" is justified because output we produce is often shorter
than a page).
Existing users who prefer not to see line-wrapped output may want to
set
$ git config core.pager "less -S"
to restore the traditional behaviour. It is expected that people
find output from the most subcommands easier to read with the new
default, except for "blame" which tends to produce really long
lines. To override the new default only for "git blame", you can do
this:
$ git config pager.blame "less -S"
* mm/pager-less-sans-S:
pager: remove 'S' from $LESS by default
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sk/msvc-dynlink-crt:
MSVC: link dynamically to the CRT
|
|
* ew/config-protect-mode:
config: preserve config file permissions on edits
|
|
* bg/strbuf-trim:
api-strbuf.txt: add docs for _trim and _ltrim
strbuf: use _rtrim and _ltrim in strbuf_trim
|
|
* jk/commit-date-approxidate:
commit: accept more date formats for "--date"
commit: print "Date" line when the user has set date
pretty: make show_ident_date public
commit: use split_ident_line to compare author/committer
|
|
Adjust shell scripts to use $(cmd) instead of `cmd`.
* ep/shell-command-substitution: (41 commits)
t5000-tar-tree.sh: use the $( ... ) construct for command substitution
t4204-patch-id.sh: use the $( ... ) construct for command substitution
t4119-apply-config.sh: use the $( ... ) construct for command substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
t4014-format-patch.sh: use the $( ... ) construct for command substitution
t4013-diff-various.sh: use the $( ... ) construct for command substitution
t4012-diff-binary.sh: use the $( ... ) construct for command substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
t4006-diff-mode.sh: use the $( ... ) construct for command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1020-subdirectory.sh: use the $( ... ) construct for command substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
...
|
|
* fc/rerere-conflict-style:
rerere: fix for merge.conflictstyle
|
|
* dt/api-doc-setup-gently:
docs: document RUN_SETUP_GENTLY and clarify RUN_SETUP
|
|
mergetool.prompt used to default to 'true', always causing a confirmation
"do you really want to run the tool on this path" to be shown.
Among the two purposes the prompt serves, ignore the use case to
confirm that the user wants to view particular path with the named
tool, and make the prompt only to confirm the choice of the tool
made by autodetection and defaulting. For those who configured the
tool explicitly, the prompt shown for the latter purpose is simply
annoying.
Strictly speaking, this is a backward incompatible change and the
users need to explicitly set the variable to 'true' if they want to
resurrect the now-ignored use case.
* fc/mergetool-prompt:
mergetool: document the default for --[no-]prompt
mergetool: run prompt only if guessed tool
|
|
* mm/mediawiki-encoding-fix:
git-remote-mediawiki: fix encoding issue for UTF-8 media files
git-remote-mediawiki: allow stop/start-ing the test server
|
Kyle J. McKay
Michael J Gruber
Junio C Hamano