| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Get rid of the fixed array of children and make max-connections
dynamic and configurable.
Fix the killing code to actually kill the newest connections from
duplicate IP-addresses.
Avoid forking if too busy already.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move almost all code out of the child_handler() into check_dead_children().
The fact that systemcalls get interrupted by signals allows us to
make the SIGCHLD signal handler almost a no-op by simply running
check_dead_children() right before waiting on poll().
In case some systems do not interrupt systemcalls upon signal receipt,
all zombies will eventually be collected before the next poll() cycle.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make git-daemon use LOG_PID like most daemons, instead of prepending the
pid to the message ourselves, when using syslog(3).
Simplify the logging code by setting stderr to line buffered, instead of
building a single string and writing it out with a single write(2).
Give an extra log message at the daemon start-up.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use logerror(), not error(), so that the messages won't be lost,
especially when running the daemon with its log sent to the syslog
facility.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
* ak/p4:
Utilise our new p4_read_pipe and p4_write_pipe wrappers
Add p4 read_pipe and write_pipe wrappers
Put in the two other configuration elements found in the source
Put some documentation in about the parameters that have been added
Move git-p4.syncFromOrigin into a configuration parameters section
Consistently use 'git-p4' for the configuration entries
If the user has configured various parameters, use them.
Switch to using 'p4_build_cmd'
If we are in verbose mode, output what we are about to run (or return)
Add a single command that will be used to construct the 'p4' command
Utilise the new 'p4_system' function.
Have a command that specifically invokes 'p4' (via system)
Utilise the new 'p4_read_pipe_lines' command
Create a specific version of the read_pipe_lines command for p4 invocations
Conflicts:
contrib/fast-import/git-p4
|
|
P4 on Windows expects the PWD environment variable to be set to the
current working dir, but os.chdir in python doesn't do so.
Signed-off-by: Robert Blum <rob.blum@gmail.com>
Acked-by: Simon Hausmann <simon@lst.de>
Acked-by: Han-Wen Nienhuys <hanwen@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" without arguments on initial startup showed:
fatal: Needed a single revision
invalid upstream
This patch makes it show the ordinary usage string.
If .git/rebase-merge or .git/rebase-apply/rebasing exists, git-rebase
will die with a message saying that a rebase is in progress and the user
should try --skip/--abort/--continue.
If .git/rebase-apply/applying exists, git-rebase will die with a message
saying that git-am is in progress, regardless how many arguments are
given.
If no arguments are given and .git/rebase-apply/ exists, but neither a
rebasing nor applying file is in that directory, git-rebase dies with a
message saying that rebase-apply exists and no arguments were given.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Allow safely calling nukefile from a run queue handler
|
|
This will ensure that the API at large is accessible to nearly
all Perl versions, while only the temp file caching API is tied to
the File::Temp and File::Spec modules being available.
Signed-off-by: Marcus Griep <marcus@griep.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was already documented in RelNotes-1.6.0, but not in the git-config
manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash -h" showed some incomplete and ugly usage information.
For example, the useful "--keep-index" option for "save" or the "--index"
option for "apply" were not shown. Also in the documentation synopsis they
were not shown, so that there is no incentive to scroll down and even see
that such options exist.
This patch improves the git-stash synopsis in the documentation by
mentioning that further options to the stash commands and then copies
this synopsis to the usage information string of git-stash.sh.
For the latter, the dashless git command string has to be inserted on the
second and the following usage lines. The code of this is taken from
git-sh-setup so that all lines will show the command string.
Note that the "create" command is not advertised at all now, because
it was not mentioned in git-stash.txt.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On platforms with $X, make removes any leftover scripts 'a' from
earlier builds if a new binary 'a.exe' is now built. However, on
cygwin 1.7.0, 'git' and 'git.exe' now consistently name the same file.
Test for file equality before attempting a remove, in order to avoid
nuking just-built binaries.
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-apply documentation says that --binary is a historical option.
This patch lets git-am ignore --binary and removes advertisements of this
option.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git allows access to the gitattributes man page via `git help attributes`,
but this is not discoverable via the bash-completion mechanism. This
patch adds all current non-command man pages to the completion candidate
list.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use square brackets instead.
And the prominent example of the deficiency are, as usual, the filesystems
of Microsoft house.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two additional wrappers to cover 3 places where we utilise p4 in piped
form. Found by Tor Arvid Lund.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --tool= long option to "git mergetool" can be completed with:
kdiff3 tkdiff meld xxdiff emerge
vimdiff gvimdiff ecmerge opendiff
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bring completion up to date with the man page.
Signed-off-by: Eric Raible <raible@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t5304-prune: adjust file mtime based on system time rather than file mtime
Fix escaping of glob special characters in pathspecs
|
|
test-chmtime can adjust the mtime of a file based on the file's mtime, or
based on the system time. For files accessed over NFS, the file's mtime is
set by the NFS server, and as such may vary a great deal from the NFS
client's system time if the clocks of the client and server are out of
sync. Since these tests are testing the expire feature of git-prune, an
incorrect mtime could cause a file to be expired or not expired incorrectly
and produce a test failure.
Avoid this NFS pitfall by modifying the calls to test-chmtime so that the
mtime is adjusted based on the system time, rather than the file's mtime.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
OPT_CALLBACK() is passed &integer which is now an "int" rather than
"unsigned long". Update the length_callback function.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
match_one implements an optimized pathspec match where it only uses
fnmatch if it detects glob special characters in the pattern. Unfortunately
it didn't treat \ as a special character, so attempts to escape a glob
special character would fail even though fnmatch() supports it.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing parent rewriting did not handle the case where a previous
commit was amended (via edit or squash). Fix by always putting the
new sha1 of the last commit into the $REWRITTEN map.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
'git rebase -i -p' forgot to update the index and working directory
during fast forwards. Fix this. Makes 'GIT_EDITOR=true rebase -i -p
<ancestor>' a no-op again.
Also, it attempted to do a fast forward even if it was instructed not
to commit (via -n). Fall back to the cherry-pick code path and let
that handle the issue for us.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Do not talk about "diff" in rev-list documentation.
|
|
Since 8c02eee (git-rev-list(1): group options; reformat; document more
options, 2006-09-01), git-rev-list documentation talks as if it supports
any kind of diff output. It doesn't.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://git.bogomips.org/git-svn:
git-svn: Reduce temp file usage when dealing with non-links
git-svn: Make it incrementally faster by minimizing temp files
Git.pm: Add faculties to allow temp files to be cached
|
|
Currently, in sub 'close_file', git-svn creates a temporary file and
copies the contents of the blob to be written into it. This is useful
for symlinks because svn stores symlinks in the form:
link $FILE_PATH
Git creates a blob only out of '$FILE_PATH' and uses file mode to
indicate that the blob should be interpreted as a symlink.
As git-hash-object is invoked with --stdin-paths, a duplicate of the
link from svn must be created that leaves off the first five bytes,
i.e. 'link '. However, this is wholly unnecessary for normal blobs,
though, as we already have a temp file with their contents. Copying
the entire file gains nothing, and effectively requires a file to be
written twice before making it into the object db.
This patch corrects that issue, holding onto the substr-like
duplication for symlinks, but skipping it altogether for normal blobs
by reusing the existing temp file.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Currently, git-svn would create a temp file on four occasions:
1. Reading a blob out of the object db
2. Creating a delta from svn
3. Hashing and writing a blob into the object db
4. Reading a blob out of the object db (in another place in code)
Any time git-svn did the above, it would dutifully create and then
delete said temp file. Unfortunately, this means that between 2-4
temporary files are created/deleted per file 'add/modify'-ed in
svn (O(n)). This causes significant overhead and helps the inode
counter to spin beautifully.
By its nature, git-svn is a serial beast. Thus, reusing a temp file
does not pose significant problems. "truncate and seek" takes much
less time than "unlink and create". This patch centralizes the
tempfile creation and holds onto the tempfile until they are deleted
on exit. This significantly reduces file overhead, now requiring
at most three (3) temp files per run (O(1)).
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
This patch offers a generic interface to allow temp files to be
cached while using an instance of the 'Git' package. If many
temp files are created and destroyed during the execution of a
program, this caching mechanism can help reduce the amount of
files created and destroyed by the filesystem.
The temp_acquire method provides a weak guarantee that a temp
file will not be stolen by subsequent requests. If a file is
locked when another acquire request is made, a simple error is
thrown.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
This completely rewrites the documentation of --full-history with lots
of examples.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All BibTeX entries starts with an @ followed by an entry type. Since
there are many entry types and own can be defined, the pattern matches
legal entry type names instead of just the default types (which would
be a long list). The pattern also matches strings and comments since
they will also be useful to position oneself in a bib-file.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the hunk header pattern text was written patterns for Ruby and
Pascal/Delphi have been added. For users to be able to find them they
should be documented not only in code.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes the bug on (amongst others) Solaris that only the first
child ever is reaped.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently "git diff --check" learned to detect new trailing blank lines
just like "git apply --whitespace" does. However this check should not
trigger unconditionally. This patch makes it honor the whitespace
settings from core.whitespace and gitattributes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-bisect: fix wrong usage of read(1)
|
|
I am not entirely clear what these parameters do but felt it
useful to call them out in the documentation.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some repositories require authentication and access to certain
hosts. Allow git-p4 to pull this information from the configuration
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Stephen R. van den Berg
Junio C Hamano
Robert Blum
Stephan Beyer
Miklos Vajna
Marcus Griep
Eric Blake
Alex Riesen
Anand Kumria
Lee Marlow
Matt McCutchen
Eric Raible
Brandon Casey
Kevin Ballard
Thomas Rast
Gustaf Hendeby