| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-1.6.5-reset-hard:
reset: unbreak hard resets with GIT_WORK_TREE
|
|
maint-1.6.5
* tr/maint-1.6.5-bash-prompt-show-submodule-changes:
bash completion: factor submodules into dirty state
|
|
* dp/maint-1.6.5-fast-import-non-commit-tag:
fast-import: tag may point to any object type
|
|
* jm/maint-1.6.5-grep-NUL-terminate:
grep: NUL terminate input from a file
|
|
* maint-1.6.4:
Fix mis-backport of t7002
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
|
|
* maint-1.6.3:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
builtin-commit.c
|
|
* maint-1.6.2:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
|
|
* commit 'v1.6.4.4-8-g8de6518':
Fix mis-backport of t7002
|
|
The original patch that became cfe370c (grep: do not segfault when -f is
used, 2009-10-16), was made against "maint" or newer branch back then, but
the fix addressed the issue that was present as far as in 1.6.4 series.
The maintainer backported the patch to the 1.6.4 maintenance branch, but
failed to notice that the new tests assumed the setup done by the script
in "maint", which did quite a lot more than the same test script in 1.6.4
series, and the output didn't match the expected result.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Internally "git grep" runs regexec(3) that expects its input string
to be NUL terminated. When searching inside blob data, read_sha1_file()
automatically gives such a buffer, but builtin-grep.c forgot to put
the NUL at the end, even though it allocated enough space for it.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you tried to export the official git repository, and then to import it
back then git-fast-import would die complaining that "Mark :1 not a commit".
Accordingly to a generated crash file, Mark 1 is not a commit but a blob,
which is pointed by junio-gpg-pub tag. Because git-tag allows to create such
tags, git-fast-import should import them.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.1:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
|
|
* maint-1.6.0:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
|
|
Here is another cleanup ...
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If switching from an unborn branch (= empty tree) to a valid commit failed
without -m, it would fail with -m option as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The -a and -r options used to be silently ignored in such a command.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the implementation of GIT_PS1_SHOWDIRTYSTATE in 738a94a (bash:
offer to show (un)staged changes, 2009-02-03), I cut&pasted the
git-diff invocations from dirty-worktree checks elsewhere, carrying
along the --ignore-submodules option.
As pointed out by Kevin Ballard, this doesn't really make sense: to
the _user_, a changed submodule counts towards uncommitted changes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We read the output from textconv helpers over a pipe, but we
never actually closed our end of the pipe after using it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 952dfc6 tried to tighten the safety valves for doing
a "reset --hard" in a bare repository or outside the work
tree, but accidentally broke the case for GIT_WORK_TREE.
This patch unbreaks it.
Most git commands which need a work tree simply use
NEED_WORK_TREE in git.c to die before they get to their
cmd_* function. Reset, however, only needs a work tree in
some cases, and so must handle the work tree itself. The
error that 952dfc6 made was to simply forbid certain
operations if the work tree was not set up; instead, we need
to do the same thing that NEED_WORK_TREE does, which is to
call setup_work_tree(). We no longer have to worry about dying
in the non-worktree case, as setup_work_tree handles that
for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.0:
commit: --cleanup is a message option
t7102: make the test fail if one of its check fails
|
|
In the usage message for "git commit", the --cleanup option appeared
at the end, as one of the "contents options":
usage: git commit [options] [--] <filepattern>...
...
Commit message options
...
Commit contents options
...
--allow-empty ok to record an empty change
--cleanup <default> how to strip spaces and #comments from message
This is confusing, in part because it makes it ambiguous whether
--allow-empty, just above, refers to an empty diff or an empty message.
Move --cleanup into the 'message options' group. Also add a pair of
comments to prevent similar oversights in the future.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use off_t to count sizes of packs and objects to avoid overflow after
4Gb.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The human-readable author and committer name can be missing from
commits imported from foreign SCM interfaces. Make sure we parse
the "author" and "committer" line a bit more leniently and avoid
segfaulting by assuming the name always exists.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user's configured editor is emacsclient, the editor
will fail to launch if emacs is not running and the git
command that tried to lanuch the editor will abort. For most
commands, all you have to do is to start emacs and repeat
the command.
The "git rebase -i" command, however, aborts without cleaning
the "$GIT_DIR/rebase-merge" directory if it fails to launch the
editor, so you'll need to do "git rebase --abort" before
repeating the rebase command.
Change "git rebase -i" to terminate using "die_abort" (instead of
with "die") if the initial launch of the editor fails.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a command is run with an absolute path as a pathspec inside a bare
repository, e.g. "rev-list HEAD -- /home", the code tried to run strlen()
on NULL, which is the result of get_git_work_tree(), and segfaulted. It
should just fail instead.
Currently the function returns NULL even inside .git/ in a repository
with a work tree, but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing the config file, if there is a value that is
syntactically correct but unused, we generally ignore it.
This lets non-core porcelains store arbitrary information in
the config file, and it means that configuration files can
be shared between new and old versions of git (the old
versions might simply ignore certain configuration).
The one exception to this is color configuration; if we
encounter a color.{diff,branch,status}.$slot variable, we
die if it is not one of the recognized slots (presumably as
a safety valve for user misconfiguration). This behavior
has existed since 801235c (diff --color: use
$GIT_DIR/config, 2006-06-24), but hasn't yet caused a
problem. No porcelain has wanted to store extra colors, and
we once a color area (like color.diff) has been introduced,
we've never changed the set of color slots.
However, that changed recently with the addition of
color.diff.func. Now a user with color.diff.func in their
config can no longer freely switch between v1.6.6 and older
versions; the old versions will complain about the existence
of the variable.
This patch loosens the check to match the rest of
git-config; unknown color slots are simply ignored. This
doesn't fix this particular problem, as the older version
(without this patch) is the problem, but it at least
prevents it from happening again in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a given command is not found, then help.c tries to guess which one the
user could have meant. If help.autocorrect is 0 or unset, then a list of
suggestions is given as long as the dissimilarity between the given command
and the candidates is not excessively high. But if help.autocorrect was
non-zero (i.e., a delay after which the command is run automatically), the
latter restriction on dissimilarity was not obeyed.
In my case, this happened:
$ git ..daab02
WARNING: You called a Git command named '..daab02', which does not exist.
Continuing under the assumption that you meant 'read-tree'
in 4.0 seconds automatically...
The patch reuses the similarity limit that is also applied when the list of
suggested commands is printed.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The example was taken from aa4ed402c9721170fde2e9e43c3825562070e65e
(Add 'filter' attribute and external filter driver definition).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Giving --format from the command line, or using output file extention to
DWIM the output format, with a pathspec that is disambiguated with an
explicit double-dash on the command line, e.g.
git archive -o file --format=zip HEAD -- path
git archive -o file.zip HEAD -- path
didn't work correctly.
This was because the code reordered (when one was given) or added (when
the format was inferred) a --format argument at the end, effectively
making it to "archive HEAD -- path --format=zip", i.e. an extra pathspec
that is unlikely to match anything.
The command line argument list should always be "options, revs and then
paths", and we should set a good example by inserting the --format at the
beginning instead.
Reported-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This hook runs after "git fetch" in the repository the objects are
fetched from as the user who fetched, and has security implications.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/maint-merge-ff-error-message-fix:
builtin-merge: show user-friendly error messages for fast-forward too.
merge-recursive: make the error-message generation an extern function
Conflicts:
merge-recursive.c
|
|
* jn/maint-pull-rebase-error-message:
pull: clarify advice for the unconfigured error case
|
|
* jk/maint-add-p-delete-fix:
add-interactive: fix deletion of non-empty files
|
|
Commit 24ab81a fixed the deletion of empty files, but broke
deletion of non-empty files. The approach it took was to
factor out the "deleted" line from the patch header into its
own hunk, the same way we do for mode changes. However,
unlike mode changes, we only showed the special "delete this
file" hunk if there were no other hunks. Otherwise, the user
would annoyingly be presented with _two_ hunks: one for
deleting the file and one for deleting the content.
This meant that in the non-empty case, we forgot about the
deleted line entirely, and we submitted a bogus patch to
git-apply (with "/dev/null" as the destination file, but not
marked as a deletion).
Instead, this patch combines the file deletion hunk and the
content deletion hunk (if there is one) into a single
deletion hunk which is either staged or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
What used to happen is that diffcore_count_changes() simply ignored any
hashes in the destination that didn't match hashes in the source. EXCEPT
if the source hash didn't exist at all, in which case it would count _one_
destination hash that happened to have the "next" hash value. As a
consequence, newly added material was often undercounted, making output
from --dirstat and "complete rewrite" detection used by -B unrelialble.
This changes it so that:
- whenever it bypasses a destination hash (because it doesn't match a
source), it counts the bytes associated with that as "literal added"
- at the end (once we have used up all the source hashes), we do the same
thing with the remaining destination hashes.
- when hashes do match, and we use the difference in counts as a value,
we also use up that destination hash entry (the 'd++').
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing code checked to make sure we were not in a bare
repository when doing a hard reset. However, we should take
this one step further, and make sure we are in a worktree.
Otherwise, we can end up munging files inside of '.git'.
Furthermore, we should do the same check for --merge resets,
which have the same properties. Actually, a merge reset of
HEAD^ would already complain, since further down in the code
we want a worktree. However, it is nicer to check up-front;
then we are sure we cover all cases ("git reset --merge"
would run, even though it wasn't doing anything) and we can
give a more specific message.
Add tests to t7103 to cover these cases and some missing ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --stringparam option is not available on older xmlto versions.
Instead, set man.base.url.for.relative.links via a .xsl file. Older
docbook versions will ignore this without causing grief to users of
older xmlto versions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mention that path parameters are based on the current working directory.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
--
Documentation/git-archive.txt | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rr-cache directory should always exist if we are doing
garbage collection (earlier code paths check this
explicitly), but we may not necessarily succeed in opening
it (for example, due to permissions problems). In that case,
we should print an error message rather than simply
segfaulting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* uk/maint-shortlog-encoding:
t4201: use ISO8859-1 rather than ISO-8859-1
shortlog: respect commit encoding
|
Junio C Hamano
Jim Meyering
Dmitry Potapov
Andreas Gruenbacher
Matthieu Moy
Thomas Rast
Jeff King
Greg Price
Andreas Schwab
Nguyễn Thái Ngọc Duy
David Reiss
Björn Gustavsson
Stephen Boyd
Johannes Sixt
Nanako Shiraishi
Linus Torvalds
Todd Zullinger
René Scharfe