| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The last check in the second block of checks in the &git_snapshot routine
is never executed because the second to last check is a superset of the
last check.
Switch the order of the last two checks. It has the advantage of giving
clients a more specific reason why they cannot get a snapshot format if
the format they have chosen is disabled.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The XZ compression format uses the LZMA2 compression algorithm, which
often yields higher compression ratios than both GZip and BZip2 at the
cost of using more CPU time and RAM. XZ is the slowest for compression,
but still much faster than BZip2 for decompression, almost comparable
to GZip (see benchmarks below).
Some simple benchmarks show the pros and cons of using XZ compression;
starting with an already tarball'd archive of the repos listed below.
Memory usage seemed to be consistent for any given algorithm at their
respective default compression levels.
CPU: AMD Sempron 3400+ (1 core @ 1.8GHz with 256K L2 cache)
Virtual Memory Usage
GZip: 4152K BZip2: 13352K XZ: 102M
Linux 2.6 series (f5886c7f96f2542382d3a983c5f13e03d7fc5259) 349M
gzip 23.70s user 0.47s system 99% cpu 24.227 total 76M
gunzip 3.74s user 0.74s system 94% cpu 4.741 total
bzip2 130.96s user 0.53s system 99% cpu 2:11.97 total 59M
bunzip2 31.05s user 1.02s system 99% cpu 32.355 total
xz 448.78s user 0.91s system 99% cpu 7:31.28 total 51M
unxz 7.67s user 0.80s system 98% cpu 8.607 total
Git (0a53e9ddeaddad63ad106860237bbf53411d11a7) 11M
gzip 0.77s user 0.03s system 99% cpu 0.792 total 2.5M
gunzip 0.12s user 0.02s system 98% cpu 0.142 total
bzip2 3.42s user 0.02s system 99% cpu 3.454 total 2.1M
bunzip2 0.95s user 0.03s system 99% cpu 0.984 total
xz 12.88s user 0.14s system 98% cpu 13.239 total 1.9M
unxz 0.27s user 0.03s system 99% cpu 0.298 total
XZ (669413bb2db954bbfde3c4542fddbbab53891eb4) 1.8M
gzip 0.12s user 0.00s system 95% cpu 0.132 total 442K
gunzip 0.02s user 0.00s system 97% cpu 0.027 total
bzip2 1.28s user 0.01s system 99% cpu 1.298 total 363K
bunzip2 0.15s user 0.01s system 100% cpu 0.157 total
xz 1.62s user 0.03s system 99% cpu 1.652 total 347K
unxz 0.05s user 0.00s system 99% cpu 0.058 total
From a time and memory perspective, nothing compares to GZip, but if
given an average upload speed of 20KB/s, it would take ~400 seconds
longer to transfer the BZip2'd kernel snapshot than the XZ snapshot;
the transfer time difference is even greater between GZip and XZ. The
real time savings are relatively the same for all test cases, but less
dramatic for smaller repositories.
XZ decompresses ~1.8-2 times slower than GZip, and ~2.7-3.75 times
faster than BZip2; XZ gets relatively faster as snapshots get larger.
However, XZ takes relatively longer to compress as snapshots get larger.
The downside for XZ'd snapshots is the large CPU and memory load put on
the server to generate the compressed snapshot, though XZ will
eventually
have threading support, and the real clock time for making XZ'd
snapshots
would decrease if the server had a beefy multi-core CPU.
XZ compression is disabled by default to allow upgrades to take place
without any surprises, as the CPU and memory requirements will be an
issue for high load or lightweight servers. Also, the XZ format is still
new (format declared stable ~6 months ago), and there have been no
"stable" releases of the utils yet.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This includes instructions on how to disable a snapshot format and how
to add options to a snapshot format (e.g. setting the compression
level).
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow Gitweb administrators to set a 'disabled' key in the
%known_snapshot_formats hash to disable a specific snapshot format.
All formats are enabled by default to maintain backwards compatibility.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/read-tree:
read-tree: migrate to parse-options
read-tree: convert unhelpful usage()'s to helpful die()'s
|
|
* jc/apply-epoch-patch:
apply: notice creation/removal patches produced by GNU diff
|
|
* sb/parse-options:
prune-packed: migrate to parse-options
verify-pack: migrate to parse-options
verify-tag: migrate to parse-options
write-tree: migrate to parse-options
|
|
* ns/init-mkdir:
git init: optionally allow a directory argument
Conflicts:
builtin-init-db.c
|
|
* mk/init-db-parse-options:
init-db: migrate to parse-options
|
|
* jk/maint-show-tag:
show: add space between multiple items
show: suppress extra newline when showing annotated tag
|
|
* sb/maint-pull-rebase:
pull: support rebased upstream + fetch + pull --rebase
t5520-pull: Test for rebased upstream + fetch + pull --rebase
|
|
* ne/futz-upload-pack:
Shift object enumeration out of upload-pack
Conflicts:
upload-pack.c
|
|
* maint:
gitweb/README: Document $base_url
Documentation: git submodule: add missing options to synopsis
Better usage string for reflog.
hg-to-git: don't import the unused popen2 module
send-email: remove debug trace
config: Keep inner whitespace verbatim
|
|
* maint-1.6.3:
Better usage string for reflog.
hg-to-git: don't import the unused popen2 module
send-email: remove debug trace
config: Keep inner whitespace verbatim
|
|
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option --merge was missing for submodule update and --cached for
submodule summary.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the documentation suggests that 'git merge-base -a' and 'git
show-branch --merge-base' are equivalent (in fact it claims that the
former cannot handle more than two revs).
Alas, the handling of more than two revs is very different. Document
this by tests and correct the documentation to reflect this.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure that usage strings and documentation coincide with each other
and with the actual code.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
...so that it is easier to reuse it for other tests.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Importing the popen2 module in Python-2.6 results in the
"DeprecationWarning: The popen2 module is deprecated. Use the
subprocess module." message. The module itself isn't used in fact, so
just removing it solves the problem.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
|
|
Equality between file_parent and file_name was being checked without a
preliminary check for existence of the parameters.
Fix by wrapping the equality check in appropriate if (defined ...),
rearranging the lines to prevent excessive length.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With extra fixes from Thadeu and Carlos as well.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current documentation states that servers typically listen on port
465 and calls this "ssmtp". While it's true that many mail servers use
port 465 for SSL smtp, this is non-standard, and hails from the days
before smtp and submission TLS support, that arrived in RFC2487 and
RFC3207. Port 465 is actually assigned by IANA for unrelated purposes,
and is mostly still used by mail servers today only to support Outlook
Express.
In any case, this patch helps the documentation better reflect both
standards and reality, while still helpfully mentioning ports numbers
that a user may wish to specify.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current documentation confuses non-standard SSL smtp port 465 with
submission port 587 (RFC 4406). This patch just changes the referenced
number.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Configuration values are expected to be quoted when they have leading or
trailing whitespace, but inner whitespace should be kept verbatim even if
the value is not quoted. This is already documented in git-config(1), but
the code caused inner whitespace to be collapsed to a single space,
breaking, for example, clones from a path that has two consecutive spaces
in it, as future fetches would only see a single space.
Reported-by: John te Bokkel <tanj.tanj@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using git fast-export and git fast-import to rewrite the history
of a repository with large binary files, almost all of the time is
spent dealing with blobs. This is extremely inefficient if all we want
to do is rewrite the commits and tree structure. --no-data skips the
output of blobs and writes SHA-1s instead of marks, which provides a
massive speedup.
Signed-off-by: Geoffrey Irving <irving@naml.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is usually better to have positive options, to avoid confusing double
negations. However, sometimes it is desirable to show the negative option
in the help.
Introduce the flag PARSE_OPT_NEGHELP to do that.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow git request-pull to append diff body into the pull request.
It's useful for small series of commits.
Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* hv/cvsps-tests:
t/t9600: remove exit after test_done
cvsimport: extend testcase about patchset order to contain branches
cvsimport: add test illustrating a bug in cvsps
Add a test of "git cvsimport"'s handling of tags and branches
Add some tests of git-cvsimport's handling of vendor branches
Test contents of entire cvsimported "master" tree contents
Use CVS's -f option if available (ignore user's ~/.cvsrc file)
Start a library for cvsimport-related tests
|
|
The problem is that if a file was replaced with a directory containing
another file with the same content and mode, an attempt to merge it
with a branch descended from a commit before this F->D transition will
cause merge-recursive to break. It breaks even if there were no
conflicting changes on that other branch.
Originally reported by Anders Melchiorsen.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The next major release will be 1.6.5, hopefully with a shorter cycle
than the 1.6.4 cycle. After that in 1.7.0 we can make potentially
backward incompatible changes if necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the description of "--ignore-errors" from git-add.txt as
inspiration.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The location to pull from should be converted from the configured nickname
to URL in the message, but ls-remote should be fed the nickname so that
the command uses remote.$nickname.* variables, most notably "uploadpack".
Signed-off-by: Tom Grennan <tgrennan@redback.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This includes mentioning the initial hash output of diff-tree, and
changes the header to "raw output format" which is more descriptive.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the less ambiguous
"set variable foo in order to enable bar"
rather than
"set variable foo to enable bar" which may trick users into
assuming that "enable" is a good value for "foo".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git svn gc" will not compress unhandled.log files if
Compress::Zlib is missing. However, leftover index files should
always be removed, so add a test for this behavior as well.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bodo Schlecht noticed that Instaweb didn't propely quote all
path instances in the Apache config file it generated.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* gp/maint-rebase-p-onto:
Fix rebase -p --onto
|
|
* en/fast-export:
fast-export: Document the fact that git-rev-list arguments are accepted
Add new fast-export testcases
fast-export: Add a --tag-of-filtered-object option for newly dangling tags
fast-export: Do parent rewriting to avoid dropping relevant commits
fast-export: Make sure we show actual ref names instead of "(null)"
fast-export: Omit tags that tag trees
fast-export: Set revs.topo_order before calling setup_revisions
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://git.bogomips.org/git-svn:
git svn: make minimize URL more reliable over http(s)
git svn: avoid escaping '/' when renaming/copying files
t9142: stop httpd after the test
git svn: the branch command no longer needs the full path
git svn: revert default behavior for --minimize-url
git svn: add gc command
|
|
In addition to path-based restrictions, Subversion servers over
http(s) may have access controls implemented via the LimitExcept
directive in Apache. In some cases, LimitExcept may be
(arguably) misconfigured to not allow REPORT requests while
allowing OPTIONS and PROPFIND.
This caused problems with our existing minimize_url logic that
only issued OPTIONS and PROPFIND requests when connecting and
using SVN::Ra::get_latest_revnum. We now call SVN::Ra::get_log
if get_latest_revnum succeeds, resulting in a REPORT request
being sent. This will increase our chances of tripping access
controls before we start attempting to fetch history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
Mark Rada
Junio C Hamano
Jakub Narebski
Jens Lehmann
Michael J Gruber
Matthieu Moy
Miklos Vajna
Erik Faye-Lund
Giuseppe Bilotta
Stephen Boyd
André Goddard Rosa
Wesley J. Landaker
Björn Steinbrink
Geoffrey Irving
Johannes Schindelin
Thadeu Lima de Souza Cascardo
Alex Riesen
Tom Grennan
David Kågedal
Eric Wong
Sean Estabrooks
Nanako Shiraishi