| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use strbuf instead of fixed-sized buffers in real_path() in order to
avoid the size limitations of the latter.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Store the original working directory in a strbuf instead of in a
fixed-sized buffer, in order to be able to handle longer paths.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert setup_git_directory_gently_1() and its helper functions
setup_explicit_git_dir(), setup_discovered_git_dir() and
setup_bare_git_dir() to use a struct strbuf to hold the current working
directory. Replacing the PATH_MAX-sized buffer used before removes a
path length limition on some file systems. The functions are converted
all in one go because they all read and write the variable cwd.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using a PATH_MAX-sized buffer, which can be too small on some
file systems, use strbuf_getcwd(), which handles any path getcwd()
returns. Also preserve the errno set by strbuf_getcwd() instead of
setting it to ENAMETOOLONG; that way a more appropriate error message
can be shown based on the actual reason for failing.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add strbuf_getcwd(), which puts the current working directory into a
strbuf. Because it doesn't use a fixed-size buffer it supports
arbitrarily long paths, provided the platform's getcwd() does as well.
At least on Linux and FreeBSD it handles paths longer than PATH_MAX
just fine.
Suggested-by: Karsten Blees <karsten.blees@gmail.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone -b brefs/tags/bar" would have mistakenly thought we were
following a single tag, even though it was a name of the branch,
because it incorrectly used strstr().
* jc/fix-clone-single-starting-at-a-tag:
builtin/clone.c: detect a clone starting at a tag correctly
|
|
"%G" (nothing after G) is an invalid pretty format specifier, but
the parser did not notice it as garbage.
* jk/pretty-G-format-fixes:
move "%G" format test from t7510 to t6006
pretty: avoid reading past end-of-string with "%G"
t7510: check %G* pretty-format output
t7510: test a commit signed by an unknown key
t7510: use consistent &&-chains in loop
t7510: stop referring to master in later tests
|
|
Code to avoid adding the same alternate object store twice was
subtly broken for a long time, but nobody seems to have noticed.
* rs/fix-alt-odb-path-comparison:
sha1_file: avoid overrunning alternate object base string
|
|
A handful of code paths had to read the commit object more than
once when showing header fields that are usually not parsed. The
internal data structure to keep track of the contents of the commit
object has been updated to reduce the need for this double-reading,
and to allow the caller find the length of the object.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
|
|
During "git rebase --merge", a conflicted patch could not be
skipped with "--skip" if the next one also conflicted.
* bc/fix-rebase-merge-skip:
rebase--merge: fix --skip with two conflicts in a row
|
|
* maint-1.9:
annotate: use argv_array
|
|
* maint-1.8.5:
annotate: use argv_array
t7300: repair filesystem permissions with test_when_finished
enums: remove trailing ',' after last item in enum
|
|
Simplify the code and get rid of some magic constants by using
argv_array to build the argument list for cmd_blame. Be lazy and let
the OS release our allocated memory, as before.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pb/trim-trailing-spaces:
t0008: do not depend on 'echo' handling backslashes specially
dir.c:trim_trailing_spaces(): fix for " \ " sequence
|
|
* jk/repack-pack-keep-objects:
repack: s/write_bitmap/&s/ in code
repack: respect pack.writebitmaps
repack: do not accidentally pack kept objects by default
|
|
* mc/doc-submodule-sync-recurse:
submodule: document "sync --recursive"
|
|
* maint-1.8.5:
t7300: repair filesystem permissions with test_when_finished
enums: remove trailing ',' after last item in enum
|
|
We create a directory that cannot be removed, confirm that
it cannot be removed, and then fix it like:
chmod 0 foo &&
test_must_fail git clean -d -f &&
chmod 755 foo
If the middle step fails but leaves the directory (e.g., the
bug is that clean does not notice the failure), this
pollutes the test repo with an unremovable directory. Not
only does this cause further tests to fail, but it means
that "rm -rf" fails on the whole trash directory, and the
user has to intervene manually to even re-run the test script.
We can bump the "chmod 755" recovery to a test_when_finished
block to be sure that it always runs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While checking if a new alternate object database is a duplicate make
sure that old and new base paths have the same length before comparing
them with memcmp. This avoids overrunning the buffer of the existing
entry if the new one is longer and it stops rejecting foobar/ after
foo/ was already added.
Signed-off-by: Rene Scharfe <ls.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final test in t7510 checks that "--format" placeholders
that look similar to GPG placeholders (but that we don't
actually understand) are passed through. That test was
placed in t7510, since the other GPG placeholder tests are
there. However, it does not have a GPG prerequisite, because
it is not actually checking any signed commits.
This causes the test to erroneously fail when gpg is not
installed on a system, however. Not because we need signed
commits, but because we need _any_ commit to run "git log".
If we don't have gpg installed, t7510 doesn't create any
commits at all.
We can fix this by moving the test into t6006. This is
arguably a better place anyway, because it is where we test
most of the other placeholders (we do not test GPG
placeholders there because of the infrastructure needed to
make signed commits).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The mode to run tests with HTTP server tests disabled was broken.
* na/no-http-test-in-the-middle:
t5538: move http push tests out to t5542
|
|
"git status" (and "git commit") behaved as if changes in a modified
submodule are not there if submodule.*.ignore configuration is set,
which was misleading. The configuration is only to unclutter diff
output during the course of development, and should not to hide
changes in the "status" output to cause the users forget to commit
them.
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
|
|
"git status", even though it is a read-only operation, tries to
update the index with refreshed lstat(2) info to optimize future
accesses to the working tree opportunistically, but this could
race with a "read-write" operation that modify the index while it
is running. Detect such a race and avoid overwriting the index.
* ym/fix-opportunistic-index-update-race:
read-cache.c: verify index file before we opportunistically update it
wrapper.c: add xpread() similar to xread()
|
|
"git show -s" (i.e. show log message only) used to incorrectly emit
an extra blank line after a merge commit.
* mk/show-s-no-extra-blank-line-for-merges:
git-show: fix 'git show -s' to not add extra terminator after merge commit
|
|
The autostash mode of "git rebase -i" did not restore the dirty
working tree state if the user aborted the interactive rebase by
emptying the insn sheet.
* rr/rebase-autostash-fix:
rebase -i: test "Nothing to do" case with autostash
rebase -i: handle "Nothing to do" case with autostash
|
|
"git log --exclude=<glob> --all | git shortlog" worked as expected,
but "git shortlog --exclude=<glob> --all", which is supposed to be
identical to the above pipeline, was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
|
|
"git remote rm" and "git remote prune" can involve removing many
refs at once, which is not a very efficient thing to do when very
many refs exist in the packed-refs file.
* jl/remote-rm-prune:
remote prune: optimize "dangling symref" check/warning
remote: repack packed-refs once when deleting multiple refs
remote rm: delete remote configuration as the last
|
|
"git rerere forget" did not work well when merge.conflictstyle
was set to a non-default value.
* fc/rerere-conflict-style:
rerere: fix for merge.conflictstyle
|
|
"git pack-objects" unnecessarily copied the previous contents when
extending the hashtable, even though it will populate the table
from scratch anyway.
* rs/pack-objects-no-unnecessary-realloc:
pack-objects: use free()+xcalloc() instead of xrealloc()+memset()
|
|
On a case insensitive filesystem, merge-recursive incorrectly
deleted the file that is to be renamed to a name that is the same
except for case differences.
* dt/merge-recursive-case-insensitive:
mv: allow renaming to fix case on case insensitive filesystems
merge-recursive.c: fix case-changing merge bug
|
|
"git mailinfo" used to read beyond the end of header string while
parsing an incoming e-mail message to extract the patch.
* rs/mailinfo-header-cmp:
mailinfo: use strcmp() for string comparison
|
|
The error reporting from "git index-pack" has been improved to
distinguish missing objects from type errors.
* jk/index-pack-report-missing:
index-pack: distinguish missing objects from type errors
|
|
We used to disable threaded "git index-pack" on platforms without
thread-safe pread(); use a different workaround for such
platforms to allow threaded "git index-pack".
* nd/index-pack-one-fd-per-thread:
index-pack: work around thread-unsafe pread()
|
|
"git grep -O" to show the lines that hit in the pager did not work
well with case insensitive search. We now spawn "less" with its
"-I" option when it is used as the pager (which is the default).
* sk/spawn-less-case-insensitively-from-grep-O-i:
git grep -O -i: if the pager is 'less', pass the '-I' option
|
|
"git gc --auto" was recently changed to run in the background to
give control back early to the end-user sitting in front of the
terminal, but it forgot that housekeeping involving reflogs should
be done without other processes competing for accesses to the refs.
* nd/daemonize-gc:
gc --auto: do not lock refs in the background
|
|
"git format-patch" did not enforce the rule that the "--follow"
option from the log/diff family of commands must be used with
exactly one pathspec.
* jk/diff-follow-must-take-one-pathspec:
move "--follow needs one pathspec" rule to diff_setup_done
|
|
"git diff --find-copies-harder" sometimes pretended as if the mode
bits have changed for paths that are marked with assume-unchanged
bit.
* jk/diff-files-assume-unchanged:
run_diff_files: do not look at uninitialized stat data
|
|
"git commit --allow-empty-message -C $commit" did not work when the
commit did not have any log message.
* jk/commit-C-pick-empty:
commit: do not complain of empty messages from -C
|
|
"git blame" assigned the blame to the copy in the working-tree if
the repository is set to core.autocrlf=input and the file used CRLF
line endings.
* bc/blame-crlf-test:
blame: correctly handle files regardless of autocrlf
|
|
"git blame" miscounted number of columns needed to show localized
timestamps, resulting in jaggy left-side-edge of the source code
lines in its output.
* jx/blame-align-relative-time:
blame: dynamic blame_date_width for different locales
blame: fix broken time_buf paddings in relative timestamp
|
|
"--ignore-space-change" option of "git apply" ignored the spaces
at the beginning of line too aggressively, which is inconsistent
with the option of the same name "diff" and "git diff" have.
* jc/apply-ignore-whitespace:
apply --ignore-space-change: lines with and without leading whitespaces do not match
|
|
The completion scripts (in contrib/) did not know about quite a few
options that are common between "git merge" and "git pull", and a
couple of options unique to "git merge".
* jk/complete-merge-pull:
completion: add missing options for git-merge
completion: add a note that merge options are shared
|
|
The "mailmap.file" configuration option did not support the tilde
expansion (i.e. ~user/path and ~/path).
* ow/config-mailmap-pathname:
config: respect '~' and '~user' in mailmap.file
|
|
The "%<(10,trunc)%s" pretty format specifier in the log family of
commands is used to truncate the string to a given length (e.g. 10
in the example) with padding to column-align the output, but did
not take into account that number of bytes and number of display
columns are different.
* as/pretty-truncate:
pretty.c: format string with truncate respects logOutputEncoding
t4205, t6006: add tests that fail with i18n.logOutputEncoding set
t4205 (log-pretty-format): use `tformat` rather than `format`
t4041, t4205, t6006, t7102: don't hardcode tested encoding value
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
|
|
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
|
|
Reworded the error message given upon a failure to open an existing
loose object file due to e.g. permission issues; it was reported as
the object being corrupt, but that is not quite true.
* jk/report-fail-to-read-objects-better:
open_sha1_file: report "most interesting" errno
|
René Scharfe
Junio C Hamano
Jeff King
Ronnie Sahlberg