| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jc/bindiff:
improve base85 generated assembly code
binary diff and apply: testsuite.
binary diff: further updates.
binary patch.
|
|
* fix:
read-cache.c: use xcalloc() not calloc()
apply: fix infinite loop with multiple patches with --index
|
|
Elsewhere we use xcalloc(); we should consistently do so.
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When multiple patches are passed to git-apply, it will attempt
to open multiple file descriptors to an index, which means
multiple entries will be in the circular cache_file_list.
This change makes git-apply only open the index once and
write the index at exit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* fix:
Separate object name errors from usage errors
Documentation: {caret} fixes (git-rev-list.txt)
Fix "git diff --stat" with long filenames
Fix repo-config set-multivar error return path.
|
|
Separate object name errors from usage errors.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This code is arguably pretty hot, if you use binary patches of course.
This patch helps gcc generate both smaller and faster code especially in
the error free path.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When we cut off the front of a filename to make it fit on the line, we add
a "..." in front. However, the way the "git diff" code was written, we
will never reset the prefix back to the empty string, so every single
filename afterwards will have the "..." prefix, whether appropriate or
not.
You can see this with "git diff v2.6.16.." on the current kernel tree,
since there are filenames with long names that changed there:
[ snip snip ]
Documentation/filesystems/vfs.txt | 229
.../firmware_class/firmware_sample_driver.c | 3
.../firmware_sample_firmware_class.c | 1
...Documentation/fujitsu/frv/kernel-ABI.txt | 192
...Documentation/hwmon/w83627hf | 4
[ snip snip ]
notice how the two Documentation/firmware** filenames caused the "..." to
be added, but then the later filenames don't want it, and it also screws
up the alignment of the line numbering afterwards.
Trivially fixed by moving the declaration (and initial setting) of the
"prefix" variable into the for-loop where it is used.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This hopefully fixes the problem an earlier commit 5d8ee9ceb attemted
to fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* fix:
repack: honor -d even when no new pack was created
clone: keep --reference even with -l -s
repo-config: document what value_regexp does a bit more clearly.
Release config lock if the regex is invalid
core-tutorial.txt: escape asterisk
|
|
You gotta love sparse:
builtin-diff.c:88:4: error: Just how const do you want this type to be?
Signed-off-by: Peter Hagervall <hager@cs.umu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If all objects are reachable via an alternate object store then we
still have to remove all obsolete local packs.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Both -l -s and --reference update objects/info/alternates and used
to write over each other.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Unfortunately, prefix_path() sometimes returns a newly xmalloc()ed buffer,
and in other cases it returns a substring!
For example, when calling
git update-index ./hello.txt
prefix_path() returns "hello.txt", but does not allocate a new buffer. The
original code only checked if the result of prefix_path() was different from
what was passed in, and thusly trigger a segmentation fault.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
- correctly insert a new variable into a section that only
contains a single (different) variable.
- correctly insert a new section that matches the initial
substring of an existing section.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If the variable we need to store should go into a section
that currently only has a single variable (not matching
the one we're trying to insert), we will already be into
the next section before we notice we've bypassed the correct
location to insert the variable.
To handle this case we store the current location as soon
as we find a variable matching the section of our new
variable.
This breakage was brought up by Linus.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
prefix_path() sometimes allocates new memory and returns it, and
other times returns the incoming path argument intact. The
callers need to be a bit careful not to leak memory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
prefix_path() sometimes allocates new memory and returns it, and
other times returns the incoming path argument intact. The
callers need to be a bit careful not to leak memory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It completely forgot to take the prefix into account, so you
had to feed the full path even when you start from a
subdirectory, which was nonsensical.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates the user interface and generated diff data format.
* "diff --binary" is used to signal that we want an e-mailable
binary patch. It implies --full-index and -p.
* "apply --allow-binary-replacement" acquired a short synonym
"apply --binary".
* After the "GIT binary patch\n" header line there is a token
to record which binary patch mechanism was used, so that we
can extend it later. Currently there are two mechanisms
defined: "literal" and "delta". The former records the
deflated postimage and the latter records the deflated delta
from the preimage to postimage.
For purely implementation convenience, I added the deflated
length after these "literal/delta" tokens (otherwise the
decoding side needs to guess and reallocate the buffer while
inflating). Improvement patches are very welcomed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds "binary patch" to the diff output and teaches apply
what to do with them.
On the diff generation side, traditionally, we said "Binary
files differ\n" without giving anything other than the preimage
and postimage object name on the index line. This was good
enough for applying a patch generated from your own repository
(very useful while rebasing), because the postimage would be
available in such a case. However, this was not useful when the
recipient of such a patch via e-mail were to apply it, even if
the preimage was available.
This patch allows the diff to generate "binary" patch when
operating under --full-index option. The binary patch follows
the usual extended git diff headers, and looks like this:
"GIT binary patch\n"
<length byte><data>"\n"
...
"\n"
Each line is prefixed with a "length-byte", whose value is upper
or lowercase alphabet that encodes number of bytes that the data
on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ...,
'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of
5-byte sequence, each of which encodes up to 4 bytes in base85
encoding. Because 52 / 4 * 5 = 65 and we have the length byte,
an output line is capped to 66 characters. The payload is the
same diff-delta as we use in the packfiles.
On the consumption side, git-apply now can decode and apply the
binary patch when --allow-binary-replacement is given, the diff
was generated with --full-index, and the receiving repository
has the preimage blob, which is the same condition as it always
required when accepting an "Binary files differ\n" patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
One of my post-update scripts runs a git-fetch into a separate
repository and sends the results back to me (2>&1); I end up
getting this in the mail:
Generating pack...
Done counting 180 objects.
Result has 131 objects.
Deltifying 131 objects.
0% (0/131) done^M 1% (2/131) done^M...
This defaults not to do the progress report when not on a tty.
You could give --progress to force the progress report, but
let's not bother even documenting it nor mentioning it in the
usage string.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* fix:
core.prefersymlinkrefs: use symlinks for .git/HEAD
repo-config: trim white-space before comment
Fix for config file section parsing.
|
|
When inspecting a project whose build infrastructure used to
assume that .git/HEAD is a symlink ref, core.prefersymlinkrefs
in the config file of such a project would help to bisect its
history.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 9f0bb90d161edf8c43f5261d12bf83f14eb02ff4 commit)
|
|
Earlier, calling
git-repo-config core.hello
on a .git/config like this:
[core]
hello = world ; a comment
would yield "world " (i.e. with a trailing space).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from c1aee1fd8d94da9b3c5d2dc1d4264f7e73a58f80 commit)
|
|
Currently, if the target key has a section that matches
the initial substring of another section we mistakenly
believe we've found the correct section. To avoid this
problem, ensure that the section lengths are identical
before comparison.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Document that git-unpack-objects will not produce any
results when used on a pack that exists in a repository;
move it first.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A bare "--" doesn't show up in man or html pages correctly
as two individual dashes unless backslashed as \--
in the asciidoc source. Note, no backslash is needed
inside a literal block.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Move incorrect asciidoc level 2 titles back to level 1.
Show output of git-name-rev in man page example.
Reword sentences that begin with a period (.) in asciidoc
numbered lists to work around conversion to man page bug.
Mention that git-repack now calls git-prune-packed
when the -d option is passed to it.
[imap] section headers in the config file example need to be
contained in a literal block. imap.pass is the proper config
file variable to use, not imap.password.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* Clarify that 'init' requires an argument
* Remove instances of 'SVN_URL' in the manpage, it's not an
environment variable.
* Refer to 'Additional Fetch Arguments' when documenting 'fetch'
* document --authors-file / -A option
Thanks to Pavel Roskin and Seth Falcon for bringing these issues
to my attention.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We used to depend on bignum from openssl for rev-list to compute
merge-order, but there is no reason to use different build
recipe from other programs anymore. Just build it with git-%$X
rule like everybody else.
Noticed by Alexey Dobriyan.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
... so do not get refspecs from remotes/* or the config if one of them
was specified.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/logs:
builtin-log/whatchanged/show: make them official.
|
|
* jc/show-branch-dense:
show-branch: omit uninteresting merges.
|
|
* jc/symref:
core.prefersymlinkrefs: use symlinks for .git/HEAD
|
|
* jc/diff:
builtin-diff: call it "git-diff", really.
builtin-diff.c: die() formatting type fix.
built-in diff: assorted updates.
built-in diff.
|
|
* js/repoconfig:
repo-config: deconvolute logics
repo-config: readability fixups.
repo-config: support --get-regexp
|
|
* jc/count:
builtin-count-objects: open packs when running -v
builtin-count-objects: make it official.
built-in count-objects.
|
|
* js/remoteconfig:
Revert "fetch, pull: ask config for remote information"
fetch, pull: ask config for remote information
builtin-push: also ask config for remote information
builtin-push: make it official.
Fix builtin-push to honor Push: lines in remotes file.
builtin-push: resurrect parsing of Push: lines
git builtin "push"
|
|
* maint:
Add a few more words to the glossary.
Added definitions for a few words:
Alphabetize the glossary.
|
|
Clean up a few entries and fix typos.
bare repository
cherry-picking
hook
topic branch
[jc: removing questionable "symbolic ref -- see 'ref'" for now.]
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
fast forward
pickaxe
refspec
tracking branch
Wild hack allows "link:git-" prefix to reference commands too.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Yakov Lerner
Eric Wong
Dmitry V. Levin
Nicolas Pitre
Linus Torvalds
Peter Hagervall
Martin Waitz
Pavel Roskin
Matthias Lederhofer
Johannes Schindelin
sean
Jon Loeliger