| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The UTF-8 prerequisite test checked explicitly for en_US.utf8 in the
output from "locale -a", but the tests that are actually protected by the
prerequisite were asking LC_ALL=en_US.UTF-8 from the system.
This inconsistency leads the tests to fail on platforms that do not know
both en_US.UTF-8 and en_US.utf8 (thanks you, Yann Droneaud, for bringing
this up with an initial patch).
Instead, pick a locale with ".UTF-8" (with or without hyphen, spelled in
either upper or lowercase) in its name from "locale -a" output, and use it
for running the test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.7.0:
Documentation/config: describe status.submodulesummary
|
|
Commit e498257d introduced a typo while improving the GMail section
of SubmittingPatches.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ac8d5af (builtin-status: submodule summary support, 2008-04-12)
intoduced this variable and described it in git-status[1].
Include this description in git-config[1], as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.7.0:
Makefile: reenable install with NO_CURL
|
|
Setting NO_CURL leaves some variables like REMOTE_CURL_ALIASES
empty, which creates no fun when for-looping over
$(REMOTE_CURL_ALIASES) unconditionally. Make it conditional.
Reported-by: Paul Walker <PWalker752@aol.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the current working directory is the same as the work tree path
plus a suffix, e.g. 'work' and 'work-xyz', then the suffix '-xyz'
would be interpreted as a subdirectory of 'work'.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We keep getting mangled submissions from GMail's web interface. Try to
be more proactive in SubmittingPatches by
- pointing to MUA specific instructions early on,
- structuring the GMail section more clearly,
- putting send-email/SMTP before imap-send/IMAP.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
s/subdirecotry/subdirectory/
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we are in a git directory, get_git_work_tree() can return NULL.
While trying to determine whether or not the given paths are outside
the work tree, the following command would read from it anyways and
trigger a segmentation fault.
git diff / /
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bigger writes to network drives on Windows XP fail. Cap them at 31MB to
allow them to succeed. Callers need to be prepared for write() calls
that do less work than requested anyway.
On local drives, write() calls are translated to WriteFile() calls with
a cap of 64KB on Windows XP and 256KB on Vista. Thus a cap of 31MB won't
affect the number of WriteFile() calls which do the actual work. There's
still room for some other version of Windows to use a chunk size of 1MB
without increasing the number of system calls.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the problem where the cmd->err passed into start_command wasn't
being properly closed when certain types of errors occurr. (Compare
the affected code with the clean shutdown code later in the function.)
On Windows, this problem would be triggered if mingw_spawnvpe()
failed, which would happen if the command to be executed was malformed
(e.g. a text file that didn't start with a #! line). If cmd->err was
a pipe, the failure to close it could result in a hang while the other
side was waiting (forever) for either input or pipe close, e.g. while
trying to shove the output into the side band. On msysGit, this
problem was causing a hang in t5516-fetch-push.
[J6t: With a slight adjustment of the test case, the hang is also
observed on Linux.]
Signed-off-by: bert Dvornik <dvornik+git@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git_mmap implementation was broken for file sizes that wouldn't fit
into a size_t (32 bits). This was caused by intermediate variables that
were only 32 bits wide when they should be 64 bits.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to the default hooks/post-receive file, the hook is called
with three arguments on stdin:
<oldrev> <newrev> <refname>
In command-line mode, the arguments come in a different order, because
the email hook instead calls:
generate_email $2 $3 $1
Add a comment to explain why, based on comments from the mailing list
and the commit message to v1.5.1~9. Thanks to Andy for the
explanation.
Requested-by: martin f. krafft <madduck@debian.org>
Cc: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reverse the order of "origin" and "result" so that the sentence
really describes an addition rather than a removal.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we don't always write out commands in full (`git command`) we
should do it consistently in adjacent paragraphs.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The check whether size is zero was done after if size <= SMALL_FILE_SIZE,
as result, zero size case was never triggered. Instead zero length file
was treated as any other small file. This did not caused any problem, but
if we have a special case for size equal to zero, it is better to make it
work and avoid redundant malloc().
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Restrict the tags used to generate the version string to those that
begin with "v", since git's tags for git-core (ie. excluding git-gui)
are all of the form "vX.Y...".
This is to avoid using private tags by the user in a clone of the git
code repository, which may break certain machinery (eg. Makefile, gitk).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we know we are creating a bare repository, we use setenv
to set the GIT_DIR directory to the current directory
(either where we already were, or one we created and chdir'd
into with "git init --bare <dir>").
However, with "git --bare init <dir>" (note the --bare as a
git wrapper option), the setup code actually sets GIT_DIR
for us, but it uses the wrong, original cwd when a directory
is given. Because our setenv does not use the overwrite
flag, it is ignored.
We need to set the overwrite flag, but only when we are
given a directory on the command line. That still allows:
GIT_DIR=foo.git git init --bare
to work. The behavior is changed for:
GIT_DIR=foo.git git init --bare bar.git
which used to create the repository in foo.git, but now will
use bar.git. This is more sane, as command line options
should generally override the environment.
Noticed by Oliver Hoffmann.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cherry-picking, usually the new and old commit encodings are both
UTF-8. Most old iconv implementations do not support this trivial
conversion, so on old platforms, out->message remains NULL, and later
attempts to read it segfault.
Fix this by noticing the input and output encodings match and skipping
the iconv step, like the other reencode_string() call sites already do.
Also stop segfaulting on other iconv failures: if iconv fails for some
other reason, the best we can do is to pass the old message through.
This fixes a regression introduced in v1.7.1-rc0~15^2~2 (revert:
clarify label on conflict hunks, 2010-03-20).
Reported-by: Andreas Krey <a.krey@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In particular the gitweb/GITWEB-BUILD-OPTIONS file was not being
removed by the main Makefile. However, the gitweb/Makefile has a
'clean' target that correctly removes all the build products.
In order to fix the problem, rather than duplicate the clean-up
instructions, we change the main Makefile so that it delegates
the clean-up actions to the gitweb Makefile.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation erroneously mentions the GIT_NOTES_REWRITE_REF
override in the description of notes.rewrite.<command>. Move it
under notes.rewriteRef where it belongs.
Signed-off-by: Leif Arne Storset <lstorset@opera.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 3bf7886 (test-lib: Let tests specify commands to be run at end of
test, 2010-05-02), the git test harness learned to run cleanup
commands unconditionally at the end of a test. During each test,
the intended cleanup actions are collected in the test_cleanup variable
and evaluated. That variable looks something like this:
eval_ret=$?; clean_something && (exit "$eval_ret")
eval_ret=$?; clean_something_else && (exit "$eval_ret")
eval_ret=$?; final_cleanup && (exit "$eval_ret")
eval_ret=$?
All cleanup actions are run unconditionally but if one of them fails
it is properly reported through $eval_ret.
On FreeBSD, unfortunately, $? is set at the beginning of an ‘eval’
to 0 instead of the exit status of the previous command. This results
in tests using test_expect_code appearing to fail and all others
appearing to pass, unless their cleanup fails. Avoid the problem by
setting eval_ret before the ‘eval’ begins.
Thanks to Jeff King for the explanation.
Cc: Jeff King <peff@peff.net>
Cc: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Certain actions can imply that if the test fails early, recovery from
within other tests is too much to expect:
- creating unwritable directories, like the EACCESS test in t0001-init
- setting unusual configuration, like user.signingkey in t7004-tag
- crashing and leaving the index lock held, like t3600-rm once did
Some test scripts work around this by running cleanup actions outside
the supervision of the test harness, with the unfortunate consequence
that those commands are not appropriately echoed and their output not
suppressed. Others explicitly save exit status, clean up, and then
reset the exit status within the tests, which has excellent behavior
but makes the tests hard to read. Still others ignore the problem.
Allow tests a fourth option: by calling this function, tests can
stack up commands they would like to be run to clean up.
Commands passed to test_when_finished during a test are
unconditionally run in the test environment immediately before the
test is completed, in last-in-first-out order. If some cleanup
command fails, then the other cleanup commands are still run before
the failure is reported and the test script allowed to continue.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.7.0:
remove ecb parameter from xdi_diff_outf()
|
|
xdi_diff_outf() overrides the structure members of its last parameter,
ignoring any value that callers pass in. It's no surprise then that all
callers pass a pointer to an uninitialized structure. They also don't
read it after the call, so the parameter is neither used for input nor
for output. Turn it into a local variable of xdi_diff_outf().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Acked by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, a local git clone reports only initializing an empty
git dir, which is potentially confusing.
Instead, report that cloning is in progress and when it is done
(unless -q) is given, and suppress the init report.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dear Junio,
this is a resend of relicensing patch for test suite library, which
was initially sent by Carl Worth. Since the time you sent me acks for
this patch collected by you, I collected 8 additional acks as is
documented at
https://git.wiki.kernel.org/index.php/Test-lib_reclicensing. There are
still three contributors missing: Bert Wesarg, Stephan Beyer and Bryan
Donlan. The contributions of first two are clearly not copyrightable.
I'm not sure about the copyrightability of Bryan Donlan's
contributions (git log -p --author='Bryan Donlan' t/test-lib.sh).
Carl told me that in your ack collection process you missed only three
acks. So I wonder whether you already did some analysis of which
contributions are copyrightable. If so, are the missing acks in the
list bellow?
Thanks
Michal
8<--------8<--------8<--------
This file has had no explicit license information noted in it, but
has clearly been created and modified according to the terms of GPLv2
as with the rest of the git code base.
The purpose of relicensing is to allow other GPLv3+ projects (in
particular, the notmuch project: http://notmuchmail.org) to use this
same test-suite structure and to contribute changes back as well.
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Brandon Casey <drafnel@gmail.com>
Acked-by: Clemens Buchacher <drizzd@aon.at>
Acked-by: David Reiss <dreiss@facebook.com>
Acked-by: Emil Sit <sit@emilsit.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Fredrik Kuivinen <frekui@gmail.com>
Acked-by: Gerrit Pape <pape@smarden.org>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Johan Herland <johan@herland.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Lea Wiemann <lewiemann@gmail.com>
Acked-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Martin Waitz <tali@admingilde.org>
Acked-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Acked-by: Matthias Lederhofer <matled@gmx.net>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Michele Ballabio <barra_cuda@katamail.com>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Pavel Roskin <proski@gnu.org>
Acked-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
index-pack: fix trivial typo in usage string
git-submodule.sh: properly initialize shell variables
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-submodule inherits variables from the environment it is started in,
expects the internal variables init= and recursive= to have an empty
value, but doesn't initialize them appropriately. Thanks to the
selftests, this can be reproduced through
init=1 make test
recursive=1 make test
With this commit the variables are initialized, and the selftests
succeed even if these variables have some values in the environment.
The bug was discovered through the Debian autobuilders
http://bugs.debian.org/569594
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
memset() is heavily optimized, and resulting assembler code
is about 150 lines less for that file.
Signed-off-by: Alexey Mahotkin <squadette@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation improvements for the description of short format.
|
|
Incorporates the detailed explanation from Jeff King in
<20100410040959.GA11977@coredump.intra.peff.net> and fixes
the bug noted by Junio C Hamano in
<7vmxxc1i8g.fsf@alter.siamese.dyndns.org>.
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/use-default-abbrev-length-in-rev-list:
rev-list: use default abbrev length when abbrev-commit is in effect
|
|
* wp/doc-filter-direction:
documentation: clarify direction of core.autocrlf
|
|
* jk/maint-diffstat-overflow:
diff: use large integers for diffstat calculations
|
|
* da/maint-python-startup:
Makefile: Remove usage of deprecated Python "has_key" method
|
|
* maint:
Documentation/Makefile: fix interrupted builds of user-manual.xml
|
|
Unlike gcc, asciidoc does not atomically write its output file or
delete it when interrupted. If it is interrupted in the middle of
writing an XML file, the result will be truncated input for xsltproc.
XSLTPROC user-manual.html
user-manual.xml:998: parser error : Premature end of data in t
Take care of this case by writing to a temporary and renaming it when
finished.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t7012: Mark missing tests as TODO
reflog: remove 'show' from 'expire's usage string
MSVC: Fix build by adding missing termios.h dummy
|
|
Currently, there are 6 tests which are not even written but are
'test_expect_failure message false'.
Do not abuse test_expect_failure as a to do marker, but mark them as
'#TODO' instead.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Nguyen Thai Ngoc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Tim Henigan
Michael J Gruber
Clemens Buchacher
Tay Ray Chuan
René Scharfe
bert Dvornik
Ian McLean
Jonathan Nieder
Markus Heidelberg
Dmitry Potapov
Jeff King
Ramsay Jones
Leif Arne Storset
Ping Yin
Michal Sojka
Sverre Rabbelier
Gerrit Pape
Alexey Mahotkin
Eric Raymond