| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Like error(), warn(), and die(), advise() prints a short message
with a formulaic prefix to stderr.
It is local to revert.c for now because I am not sure this is
the right API (we may want to take an array of advice lines or a
boolean argument for easy suppression of unwanted advice).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cherry-pick was written (v0.99.6~63, 2005-08-27), “git commit”
was quiet, and the output from cherry-pick provided useful information
about the progress of a rebase.
Now next to the output from “git commit”, the cherry-pick notification
is so much noise (except for the name of the picked commit).
$ git cherry-pick ..topic
Finished cherry-pick of 499088b.
[detached HEAD 17e1ff2] Move glob module to libdpkg
Author: Guillem Jover <guillem@debian.org>
8 files changed, 12 insertions(+), 9 deletions(-)
rename {src => lib/dpkg}/glob.c (98%)
rename {src => lib/dpkg}/glob.h (93%)
Finished cherry-pick of ae947e1.
[detached HEAD 058caa3] libdpkg: Add missing symbols to Versions script
Author: Guillem Jover <guillem@debian.org>
1 files changed, 2 insertions(+), 0 deletions(-)
$
The noise is especially troublesome when sifting through the output of
a rebase or multiple cherry-pick that eventually failed.
With the commit subject, it is already not hard to figure out where
the commit came from. So drop the “Finished” message.
Cc: Christian Couder <chriscool@tuxfamily.org>
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a test like:
test "$(git rev-parse --verify HEAD)" != "$(git rev-parse --verify fourth)"
the --verify does not accomplish much, since the exit status of
git rev-parse is not propagated to test. So it is more robust to
define and use the helper functions check_head_differs_from() and
check_head_equals() as done by this patch.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of saying "Finished one cherry-pick." or "Finished one revert.",
we now say "Finished cherry-pick of commit <abbreviated sha1>." or
"Finished revert of commit <abbreviated sha1>." which is more informative,
especially when cherry-picking or reverting many commits.
In case of failure the message is now "Automatic cherry-pick of commit
<abbreviated sha1> failed." instead of "Automatic cherry-pick failed."
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cherry-pick foo" has always reported success with
"Finished one cherry-pick" but "cherry-pick --strategy"
does not print anything. So move the code to write that
message from do_recursive_merge() to do_cherry_pick()
so other strategies can share it.
This patch also refactors the code that prints a message
like "Automatic cherry-pick failed. <help message>". This
code was duplicated in both do_recursive_merge() and
do_pick_commit().
To do that, now do_recursive_merge() returns an int to signal
success or failure. And in case of failure we just return 1
from do_pick_commit() instead of doing "exit(1)" from either
do_recursive_merge() or do_pick_commit().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/paginate-fix:
git --paginate: paginate external commands again
git --paginate: do not commit pager choice too early
tests: local config file should be honored from subdirs of toplevel
t7006: test pager configuration for several git commands
t7006 (pager): introduce helper for parameterized tests
Conflicts:
t/t7006-pager.sh
|
|
* wp/merge-tree-fix:
merge-tree: fix where two branches share no changes
add basic tests for merge-tree
|
|
* js/merge-rr-fix:
MERGE_RR is in .git, not .git/rr-cache
|
|
* jc/diff-merge-base-multi:
diff A...B: give one possible diff when there are more than one merge-base
|
|
* ns/merge-recursive-uptodate:
merge-recursive: use "up-to-date" instead of "uptodate" in error message for consistency
|
|
* jn/tests:
t3000 (ls-files -o): modernize style
|
|
* eb/doc-log-manpage:
Reorganize `git-log' man page to clarify common diff options.
|
|
* jn/grep-open:
grep -O: Do not pass color sequences as filenames to pager
|
|
* mg/revision-doc:
Documentation: link to gitrevisions rather than git-rev-parse
Documentation: gitrevisions
Documentation: split off rev doc into include file
|
|
* jk/maint-status-keep-index-timestamp:
do not write out index when status does not have to
|
|
* jc/rebase-i-commit-msg-fix:
rebase-i: do not get fooled by a log message ending with backslash
rebase-i: style fix
|
|
* ab/submodule-add-f:
git submodule: add submodules with git add -f <path>
|
|
* bc/maint-makefile-fixes:
Makefile: work around ksh's failure to handle missing list argument to for loop
Makefile: remove some unnecessary curly braces
|
|
* maint:
Documentation: add submodule.* to the big configuration variable list
gitmodules.5: url can be a relative path
gitweb: fix esc_url
|
|
The url, path, and the update items in [submodule "foo"] stanzas
are nicely explained in the .gitmodules and ‘git submodule’
documentation. Point there from the config documentation.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is already excellent documentation for this facility in
git-submodule.1, but it is not so discoverable.
Relative paths in .gitmodules can be useful for serving the
same repository over multiple protocols, for example.
Thanks to Peter for pointing this out.
Cc: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, 452e225 (gitweb: fix esc_param, 2009-10-13) fixed CGI escaping
rules used in esc_url. A very similar logic exists in esc_param and needs
to be fixed the same way.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
73e25e7c (git --paginate: do not commit pager choice too early,
2010-06-26) failed to take some cases into account.
1b. Builtins that do not use RUN_SETUP (like git config) do
not find GIT_DIR set correctly when the pager is launched
from run_builtin(). So the core.pager configuration is
not honored from subdirectories of the toplevel for them.
4a. External git commands (like git request-pull) relied on the
early pager launch to take care of handling the -p option.
Ever since 73e25e7c, they do not honor the -p option at all.
4b. Commands invoked through ! aliases (like ls) were also relying
on the early pager launch.
Fix (4a) by launching the pager (if requested) before running such a
“dashed external”. For simplicity, this still does not search for a
.git directory before running the external command; when run from a
subdirectory of the toplevel, therefore, the “[core] pager”
configuration is still not honored.
Fix (4b) by launching pager if requested before carrying out such an
alias. Actually doing this has no effect, since the pager (if any)
would have already been launched in a failed attempt to try a
dashed external first. The choice-of-pager-not-honored-from-
subdirectory bug still applies here, too.
(1b) is not a regression. There is no need to fix it yet.
Noticed by Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
0af0ac7 (Move MERGE_RR from .git/rr-cache/ into .git/) moved the
location of MERGE_RR but I found a few references to the old
location.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
15b4f7a (merge-tree: use ll_merge() not xdl_merge(), 2010-01-16)
introduced a regression to merge-tree to cause it to segfault when merging
files which existed in one branch, but not in the other or in the
merge-base. This was caused by referencing entry->path at a time when
entry was known to be possibly-NULL.
To correct the problem, we save the path of the entry we came in with,
as the path should be the same among all the stages no matter which
sides are involved in the merge.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge-tree had no test cases, so here we add some very basic tests for
it, including some known-breakages.
[jc: with obvious/trivial fixups]
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/read-tree-cache-tree-fix:
Fix "read-tree -m A B" priming the cache-tree
|
|
The original declaration was int, which seems to cause trouble on my
machine. It causes spurious "filesystem boundary" errors when running
the testsuite. The cause seems to be
$ stat -c%d .
2147549952
which is too large for a 32-bit int type.
Using the correct type, dev_t, solves the issue. (Because I'm
paranoid and forgetful, I checked -- yes, Unix v7 had dev_t.)
Other uses of st_dev seem to be reasonably safe. fill_stat_cache_info
truncates it to an 'unsigned int', but that value seems to be used only
to validate the cache, and only if USE_STDEV is defined.
Signed-off-by: Raja R Harinath <harinath@hurrynot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We instead showed a combined diff that explains one of the randomly
chosen merge-base as if it were the result of merging all the other
merge bases and two tips given, which made no sense at all.
An alternative is to simply fail such a request, telling the user that
there are criss-cross merges, but it wouldn't be so helpful.
Noticed by James Pickens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git fetch documentation: describe short '-p' synonym to '--prune' option
format-patch: document the format.to configuration setting
|
|
It's already implemented, just undocumented.
Signed-off-by: Oren Held <orenhe@il.ibm.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[jc: with simplification from Jonathan Nieder]
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the output TAP compliant for tests skipped on request (GIT_SKIP_TESTS).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break, 2006-12-28)
introduced GIT_SKIP_TESTS, and since then we have had two nested loops
iterating over GIT_SKIP_TESTS with the same loop variable.
Reduce this to one loop.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: Spelling fix in protocol-capabilities.txt
checkout: accord documentation to what git does
t0005: work around strange $? in ksh when program terminated by a signal
|
|
This script is part of the second batch of tests, from the same day
the test infrastructure was added to git. Update it to use a more
modern style in the spirit of v1.6.4-rc0~45^2~2 (2009-05-22).
In particular:
- Put setup code inside test assertions, to avoid unexpected
breakages and avoid stray output without -v (as t/README
recommends); and
- Put the test title on the same line as the "test_expect_success",
and end the line with a single-quote to begin the body of the test
which is one multi-line string.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Fredrik Skolmli <fredrik@frsk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
consistency
Signed-off-by: Nicolas Sebrecht <nicolas.s.dev@gmx.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nicolas Sebrecht <nicolas.s.dev@gmx.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ksh93 is known to report $? of programs that terminated by a signal as
256 + signal number instead of 128 + signal number like other POSIX
compliant shells (ksh's behavior is still POSIX compliant in this regard).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ko/master: (2325 commits)
Git 1.7.2-rc2
backmerge a few more fixes to 1.7.1.X series
fix git branch -m in presence of cross devices
t/t0006: specify timezone as EST5 not EST to comply with POSIX
add missing && to submodule-merge testcase
t/README: document more test helpers
test-date: fix sscanf type conversion
xdiff: optimise for no whitespace difference when ignoring whitespace.
gitweb: Move evaluate_gitweb_config out of run_request
parse_date: fix signedness in timezone calculation
t0006: test timezone parsing
rerere.txt: Document forget subcommand
t/README: proposed rewording...
t/README: Document the do's and don'ts of tests
t/README: Add a section about skipping tests
t/README: Document test_expect_code
t/README: Document test_external*
t/README: Document the prereq functions, and 3-arg test_*
t/README: Typo: paralell -> parallel
t/README: The trash is in 't/trash directory.$name'
...
Conflicts:
builtin-read-tree.c
|
|
When --graph is in effect, the line-prefix typically has colored graph
line segments and ends with reset. The color sequence "set" given to
this function is for showing the metainfo part of the patch text and
(1) it should not be applied to the graph lines, and (2) it will be
reset at the end of line_prefix so it won't be in effect anyway.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change tests to skip with skip_all=* + test_done instead of using say
+ test_done.
This is a follow-up to "tests: Skip tests in a way that makes sense
under TAP" (fadb5156e4). I missed these cases when prepearing that
patch, hopefully this is all of them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 456156d a shortcut to priming the index tree reference was
introduced, but the justification for it was completely bogus.
"read-tree -m A B" is to take the index (and the working tree)
that is largely based on (but does not have to match exactly) A
and update it to B, while carrying the local change that does
not overlap the difference between A and B, so there is no reason
to expect that the resulting index should match the tree B.
Noticed and test provided by Heiko Voigt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will reduce considerably the common confusion where people miss the
`--follow' option, and wonder why `-M'/`-C' is not working.
* Move the diff options include to after the log-specific flags, and add
a "Common diff options" subtitle before them. (These options apply
only when patches are shown, which is not a common use case among
newbies, so having them first is confusing.)
* Move the `--follow' description to the top of the listed options. The
options before that seem less important: `--full-diff' applies only
when patches are shown, `--source' and `--decorate' are less useful
with many common commit specifications.
* Clarify that `--follow' works only for a single path argument.
Signed-off-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When test #2 fails, the cwd is project/, causing all the
remaining tests in the same script to get confused and fail.
So in the spirit of v1.7.1.1~53^2~10 (t5550-http-fetch: Use subshell
for repository operations, 2010-04-17), use a subshell for svn
working copy operations. This way, the cwd will reliably return
to the top of the trash directory and later tests can still be run
when a command has failed.
Reported-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
@ is SVN's identifier for PEG revisions. But SVN's treatment of PEG
identifiers in copy target URLs changed in r954995/r952973, i.e. between
1.6.11 and 1.6.12. They get eaten now (which is considered the right
way).
Therefore, avoid the @ in the tests with funky branch names.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
Jonathan Nieder
Christian Couder
Junio C Hamano
Pavan Kumar Sunkara
Jay Soffian
Will Palmer
Raja R Harinath
Oren Held
Miklos Vajna
Michael J Gruber
Fredrik Skolmli
Nicolas Sebrecht
Johannes Sixt
Bo Yang
Ævar Arnfjörð Bjarmason
Eli Barzilay