Age | Commit message (Collapse) | Author | Files | Lines |
|
Change the ref-filter sorting of detached HEAD to check the
FILTER_REFS_DETACHED_HEAD flag, instead of relying on the ref
description filled-in by get_head_description() to start with "(",
which in turn we expect to ASCII-sort before any other reference.
For context, we'd like the detached line to appear first at the start
of "git branch -l", e.g.:
$ git branch -l
* (HEAD detached at <hash>)
master
This doesn't change that, but improves on a fix made in
28438e84e04 (ref-filter: sort detached HEAD lines firstly, 2019-06-18)
and gives the Chinese translation the ability to use its preferred
punctuation marks again.
In Chinese the fullwidth versions of punctuation like "()" are
typically written as (U+FF08 fullwidth left parenthesis), (U+FF09
fullwidth right parenthesis) instead[1]. This form is used in both
po/zh_{CN,TW}.po in most cases where "()" is translated in a string.
Aside from that improvement to the Chinese translation, it also just
makes for cleaner code that we mark any special cases in the ref_array
we're sorting with flags and make the sort function aware of them,
instead of piggy-backing on the general-case of strcmp() doing the
right thing.
As seen in the amended tests this made reverse sorting a bit more
consistent. Before this we'd sometimes sort this message in the
middle, now it's consistently at the beginning or end, depending on
whether we're doing a normal or reverse sort. Having it at the end
doesn't make much sense either, but at least it behaves consistently
now. A follow-up commit will make this behavior under reverse sorting
even better.
I'm removing the "TRANSLATORS" comments that were in the old code
while I'm at it. Those were added in d4919bb288e (ref-filter: move
get_head_description() from branch.c, 2017-01-10). I think it's
obvious from context, string and translation memory in typical
translation tools that these are the same or similar string.
1. https://en.wikipedia.org/wiki/Chinese_punctuation#Marks_similar_to_European_punctuation
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the reverse/ignore_case/version sort flags in the ref_sorting
struct into a bitfield. Having three of them was already a bit
unwieldy, but it would be even more so if another flag needed a
function like ref_sorting_icase_all() introduced in
76f9e569adb (ref-filter: apply --ignore-case to all sorting keys,
2020-05-03).
A follow-up change will introduce such a flag, so let's move this over
to a bitfield. Instead of using the usual '#define' pattern I'm using
the "enum" pattern from builtin/rebase.c's b4c8eb024af (builtin
rebase: support --quiet, 2018-09-04).
Perhaps there's a more idiomatic way of doing the "for each in list
amend mask" pattern than this "mask/on" variable combo. This function
doesn't allow us to e.g. do any arbitrary changes to the bitfield for
multiple flags, but I think in this case that's fine. The common case
is that we're calling this with a list of one.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further amend code changed in 7c5045fc180 (ref-filter: apply fallback
refname sort only after all user sorts, 2020-05-03) to move an
assignment only used in the "else if" arm to happen there. Before that
commit the cmp_fn would be used outside of it.
We could also just skip the "cmp_fn" assignment and use
strcasecmp/strcmp directly in a ternary statement here, but this is
probably more readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Per the CodingGuidelines add braces to an if/else if/else chain where
only the "else" had braces. This is in preparation for a subsequent
change where the "else if" will have lines added to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further stress the --sort callback in ref-filter.c. The implementation
uses certain short-circuiting logic, let's make sure it behaves the
same way on e.g. name & version sort. Improves a test added in
aedcb7dc75e (branch.c: use 'ref-filter' APIs, 2015-09-23).
I don't think all of this output makes sense, but let's test for the
behavior as-is, we can fix bugs in it in a later commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has never been a "git branch --local", this is just a typo for
"--list". Fixes a comment added in 23e714df91c (branch: roll
show_detached HEAD into regular ref_list, 2015-09-23).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* pb/doc-git-linkit-fix:
git.txt: fix typos in 'linkgit' macro invocation
|
|
l10n for Git 2.30.0 round 2
* tag 'l10n-2.30.0-rnd2' of https://github.com/git-l10n/git-po:
l10n: zh_CN: for git v2.30.0 l10n round 1 and 2
l10n: zh_TW.po: v2.30.0 round 2 (1 untranslated)
l10n: pl.po: add translation and set team leader
l10n: pl.po: started Polish translation
l10n: de.po: Update German translation for Git 2.30.0
l10n: Update Catalan translation
l10n: bg.po: Updated Bulgarian translation (5037t)
l10n: fr.po v2.30.0 rnd 2
l10n: tr: v2.30.0-r2
l10n: sv.po: Update Swedish translation (5037t0f0u)
l10n: vi.po(5037t): v2.30.0 rnd 2
l10n: git.pot: v2.30.0 round 2 (1 new, 2 removed)
l10n: Update Catalan translation
l10n: fr.po: v2.30.0 rnd 1
l10n: fr.po Fix a typo
l10n: fr fix misleading message
l10n: tr: v2.30.0-r1
l10n: sv.po: Update Swedish translation (5038t0f0u)
l10n: git.pot: v2.30.0 round 1 (70 new, 45 removed)
|
|
Translate 71 new messages (5037t0f0u) for git 2.30.0.
Reviewed-by: 依云 <lilydjwg@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'l10n/zh_TW/201223' of github.com:l10n-tw/git-po:
l10n: zh_TW.po: v2.30.0 round 2 (1 untranslated)
|
|
Signed-off-by: pan93412 <pan93412@gmail.com>
|
|
Signed-off-by: Arusekk <arek_koz@o2.pl>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix for recent regression.
* nk/refspecs-negative-fix:
negative-refspec: improve comment on query_matches_negative_refspec
negative-refspec: fix segfault on : refspec
|
|
Hotfix for a topic of this cycle.
* ma/maintenance-crontab-fix:
t7900-maintenance: test for magic markers
gc: fix handling of crontab magic markers
git-maintenance.txt: add missing word
|
|
Fix to a regression introduced during this cycle.
* dl/checkout-p-merge-base:
checkout -p: handle tree arguments correctly again
|
|
Test coverage fix.
* js/no-more-prepare-for-main-in-test:
tests: drop the `PREPARE_FOR_MAIN_BRANCH` prereq
t9902: use `main` as initial branch name
t6302: use `main` as initial branch name
t5703: use `main` as initial branch name
t5510: use `main` as initial branch name
t5505: finalize transitioning to using the branch name `main`
t3205: finalize transitioning to using the branch name `main`
t3203: complete the transition to using the branch name `main`
t3201: finalize transitioning to using the branch name `main`
t3200: finish transitioning to the initial branch name `main`
t1400: use `main` as initial branch name
|
|
"git pack-redandant" when there is only one packfile used to crash,
which has been corrected.
* jx/pack-redundant-on-single-pack:
pack-redundant: fix crash when one packfile in repo
|
|
Signed-off-by: Arusekk <arek_koz@o2.pl>
|
|
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Phillip Szelat <phillip.szelat@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
* 'master' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
The 'linkgit' Asciidoc macro is misspelled as 'linkit' in the
description of 'GIT_SEQUENCE_EDITOR' since the addition of that variable
to git(1) in 902a126eca (doc: mention GIT_SEQUENCE_EDITOR and
'sequence.editor' more, 2020-08-31). Also, it uses two colons instead of
one.
Fix that.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Comment did not adequately explain how the two loops work
together to achieve the goal of querying for matching of any
negative refspec.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic added to check for negative pathspec match by c0192df630
(refspec: add support for negative refspecs, 2020-09-30) looks at
refspec->src assuming it is never NULL, however when
remote.origin.push is set to ":", then refspec->src is NULL,
causing a segfault within strcmp.
Tell git to handle matching refspec by adding the needle to the
set of positively matched refspecs, since matching ":" refspecs
match anything as src.
Add test for matching refspec pushes fetch-negative-refspec
both individually and in combination with a negative refspec.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'fr_2.30_rnd2' of github.com:jnavila/git:
l10n: fr.po v2.30.0 rnd 2
|
|
When we insert our "BEGIN" and "END" markers into the cron table, it's
so that a Git version from many years into the future would be able to
identify this region in the cron table. Let's add a test to make sure
that these markers don't ever change.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On `git maintenance start`, we add a few entries to the user's cron
table. We wrap our entries using two magic markers, "# BEGIN GIT
MAINTENANCE SCHEDULE" and "# END GIT MAINTENANCE SCHEDULE". At a later
`git maintenance stop`, we will go through the table and remove these
lines. Or rather, we will remove the "BEGIN" marker, the "END" marker
and everything between them.
Alas, we have a bug in how we detect the "END" marker: we don't. As we
loop through all the lines of the crontab, if we are in the "old
region", i.e., the region we're aiming to remove, we make an early
`continue` and don't get as far as checking for the "END" marker. Thus,
once we've seen our "BEGIN", we remove everything until the end of the
file.
Rewrite the logic for identifying these markers. There are four cases
that are mutually exclusive: The current line starts a region or it ends
it, or it's firmly within the region, or it's outside of it (and should
be printed).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a missing "a" before "bunch".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a segmentation fault.
The bug is caused by dereferencing `new_branch_info->commit` when it is
`NULL`, which is the case when the tree-ish argument is actually a tree,
not a commit-ish. This was introduced in 5602b500c3c (builtin/checkout:
fix `git checkout -p HEAD...` bug, 2020-10-07), where we tried to ensure
that the special tree-ish `HEAD...` is handled correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Signed-off-by: Emir Sarı <bitigchi@me.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Generate po/git.pot from v2.30.0-rc1 for git v2.30.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* github/master: (42 commits)
Git 2.30-rc1
git-gui: use gray background for inactive text widgets
Another batch before 2.30-rc1
git-gui: Fix selected text colors
Makefile: conditionally include GIT-VERSION-FILE
git-gui: fix colored label backgrounds when using themed widgets
config.mak.uname: remove old NonStop compatibility settings
diff: correct interaction between --exit-code and -I<pattern>
t/perf: fix test_export() failure with BSD `sed`
style: do not "break" in switch() after "return"
compat-util: pretend that stub setitimer() always succeeds
strmap: make callers of strmap_remove() to call it in void context
doc: mention Python 3.x supports
index-format.txt: document v2 format of file system monitor extension
docs: multi-pack-index: remove note about future 'verify' work
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
t7900: use --fixed-value in git-maintenance tests
...
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff -I<pattern> -exit-code" should exit with 0 status when
all the changes match the ignored pattern, but it didn't.
* jc/diff-I-status-fix:
diff: correct interaction between --exit-code and -I<pattern>
|
|
Dev-support fix for BSD.
* es/perf-export-fix:
t/perf: fix test_export() failure with BSD `sed`
|
|
Build update.
* rb/nonstop-config-mak-uname-update:
config.mak.uname: remove old NonStop compatibility settings
|
|
Code clean-up.
* ab/unreachable-break:
style: do not "break" in switch() after "return"
|
|
C-std compliance fix.
* jc/strmap-remove-typefix:
strmap: make callers of strmap_remove() to call it in void context
|
|
Fix a recent bug in a rarely used replacement code.
* jc/compat-util-setitimer-fix:
compat-util: pretend that stub setitimer() always succeeds
|
|
Doc update.
* dd/doc-p4-requirements-update:
doc: mention Python 3.x supports
|
|
Our users are going to be trained to prepare for future change of
init.defaultBranch configuration variable.
* js/init-defaultbranch-advice:
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
|
|
* https://github.com/prati0100/git-gui:
git-gui: use gray background for inactive text widgets
git-gui: Fix selected text colors
Makefile: conditionally include GIT-VERSION-FILE
git-gui: fix colored label backgrounds when using themed widgets
git-gui: ssh-askpass: add a checkbox to show the input text
git-gui: update Russian translation
git-gui: use commit message template
git-gui: Only touch GITGUI_MSG when needed
|
|
Set a different background color for selections in inactive widgets.
This inactive color is calculated from the current theme colors to make
sure it works for all themes.
* sh/inactive-background:
git-gui: use gray background for inactive text widgets
|