| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We don't cover the partial clone feature at all in t/perf. Let's at
least run a few basic tests so that we'll notice any regressions.
We'll do a no-blob clone, and split it into two parts: the actual object
transfer, and the subsequent checkout (which will of course require
another transfer to get the blobs). That will help us more clearly
assess the performance of each.
There are obviously a lot more possibilities besides just a no-blob
partial clone, but this should serve as a canary that alerts us to any
generic slow-downs (and we can add more tests later for cases that
aren't exercised here).
There are a few non-ideal things here that make this not an entirely
accurate test, but are probably OK for our purposes:
1. We have to do some extra prep/cleanup work inside the timing tests,
since they impact the on-disk state and the perf harness may run
each one multiple times.
In practice this is probably OK, since these bits should be much
less expensive than the operations we are measuring.
2. The clone time is likely to be dominated by the server's object
enumeration. In the real world, a repo large enough to drive people
to partial clones is likely to have reachability bitmaps enabled.
And in the opposite direction, our object transfer is happening at
the speed of a local pipe, whereas in the real world it would
bottle-neck on the network.
So any percentage speedups should be taken with a grain of salt.
But hopefully any regressions will produce enough of an effect to
be noticeable.
This script also demonstrates the recent improvement from dfa33a298d
(clone: do faster object check for partial clones, 2019-04-19):
Test dfa33a298d^ dfa33a298d
-------------------------------------------------------------------------
5600.2: clone without blobs 18.41(22.72+1.09) 6.83(11.65+0.50) -62.9%
5600.3: checkout of result 1.82(3.24+0.26) 1.84(3.24+0.26) +1.1%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For partial clones, doing a full connectivity check is wasteful; we skip
promisor objects (which, for a partial clone, is all known objects), and
enumerating them all to exclude them from the connectivity check can
take a significant amount of time on large repos.
At most, we want to make sure that we get the objects referred to by any
wanted refs. For partial clones, just check that these objects were
transferred.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line parser of "git commit-tree" has been rewritten to
use the parse-options API.
* br/commit-tree-parseopt:
commit-tree: utilize parse-options api
|
|
"git config --type=color ..." is meant to replace "git config --get-color"
but there is a slight difference that wasn't documented, which is
now fixed.
* jk/config-type-color-ends-with-lf:
config: document --type=color output is a complete line
|
|
The setup code has been cleaned up to avoid leaks around the
repository_format structure.
* ma/clear-repository-format:
setup: fix memory leaks with `struct repository_format`
setup: free old value before setting `work_tree`
|
|
A recent update broke "is this object available to us?" check for
well-known objects like an empty tree (which should yield "yes",
even when there is no on-disk object for an empty tree), which has
been corrected.
* jk/virtual-objects-do-exist:
rev-list: allow cached objects in existence check
|
|
On platforms where "git fetch" is killed with SIGPIPE (e.g. OSX),
the upload-pack that runs on the other end that hangs up after
detecting an error could cause "git fetch" to die with a signal,
which led to a flakey test. "git fetch" now ignores SIGPIPE during
the network portion of its operation (this is not a problem as we
check the return status from our write(2)s).
* jk/no-sigpipe-during-network-transport:
fetch: ignore SIGPIPE during network operation
fetch: avoid calling write_or_die()
|
|
"git fsck --connectivity-only" omits computation necessary to sift
the objects that are not reachable from any of the refs into
unreachable and dangling. This is now enabled when dangling
objects are requested (which is done by default, but can be
overridden with the "--no-dangling" option).
* jk/fsck-doc:
fsck: always compute USED flags for unreachable objects
doc/fsck: clarify --connectivity-only behavior
|
|
Dev support.
* js/stress-test-ui-tweak:
tests: introduce --stress-jobs=<N>
tests: let --stress-limit=<N> imply --stress
|
|
"git rebase" that was reimplemented in C did not set ORIG_HEAD
correctly, which has been corrected.
* js/rebase-orig-head-fix:
built-in rebase: set ORIG_HEAD just once, before the rebase
built-in rebase: demonstrate that ORIG_HEAD is not set correctly
built-in rebase: use the correct reflog when switching branches
built-in rebase: no need to check out `onto` twice
|
|
The final report from "git bisect" used to show the suspected
culprit using a raw "diff-tree", with which there is no output for
a merge commit. This has been updated to use a more modern and
human readable output that still is concise enough.
* jk/bisect-final-output:
bisect: make diff-tree output prettier
bisect: fix internal diff-tree config loading
bisect: use string arguments to feed internal diff-tree
|
|
CFLAGS now can be tweaked when invoking Make while using
DEVELOPER=YesPlease; this did not work well before.
* ab/makefile-help-devs-more:
Makefile: allow for combining DEVELOPER=1 and CFLAGS="..."
Makefile: move the setting of *FLAGS closer to "include"
Makefile: Move *_LIBS assignment into its own section
Makefile: add/remove comments at top and tweak whitespace
Makefile: move "strip" assignment down from flags
Makefile: remove an out-of-date comment
|
|
* git://ozlabs.org/~paulus/gitk:
gitk: Update Bulgarian translation (317t)
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
mingw: allow building with an MSYS2 runtime v3.x
|
|
Docfix.
* js/rebase-recreate-merge:
rebase docs: fix "gitlink" typo
|
|
Dev support.
* js/untravis-windows:
travis: remove the hack to build the Windows job on Azure Pipelines
|
|
Doxfix.
* rd/gc-prune-doc-fix:
docs/git-gc: fix typo "--prune=all" to "--prune=now"
|
|
The Makefile uses 'find' utility to enumerate all the *.h header
files, which is expensive on platforms with slow filesystems; it
now optionally uses "ls-files" if working within a repository,
which is a trick similar to how all sources are enumerated to run
ETAGS on.
* js/find-lib-h-with-ls-files-when-possible:
Makefile: use `git ls-files` to list header files, if possible
|
|
The set of header files used by "make hdr-check" unconditionally
included sha256/gcrypt.h, even when it is not used, causing the
make target to fail. We now skip it when GCRYPT_SHA256 is not in
use.
* rj/hdr-check-gcrypt-fix:
Makefile: fix 'hdr-check' when GCRYPT not installed
|
|
The include file compat/bswap.h has been updated so that it is safe
to (accidentally) include it more than once.
* jk/guard-bswap-header:
compat/bswap: add include header guards
|
|
In-code comment typofix.
* rd/attr.c-comment-typofix:
attr.c: ".gitattribute" -> ".gitattributes" (comments)
|
|
Doc update.
* yb/utf-16le-bom-spellfix:
gitattributes.txt: fix typo
|
|
Recently the Git for Windows project started the upgrade process to
a MSYS2 runtime version based on Cygwin v3.x.
This has the very notable consequence that `$(uname -r)` no longer
reports a version starting with "2", but a version with "3".
That breaks our build, as df5218b4c30b (config.mak.uname: support MSys2,
2016-01-13) simply did not expect the version reported by `uname -r` to
depend on the underlying Cygwin version: it expected the reported
version to match the "2" in "MSYS2".
So let's invert that test case to test for *anything else* than a
version starting with "1" (for MSys). That should safeguard us for the
future, even if Cygwin ends up releasing versionsl like 314.272.65536.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 20d2a30f8ffe (Makefile: replace perl/Makefile.PL with simple make
rules, 2017-12-10), Git stopped using MakeMaker. Therefore, that
definition in the MINGW-specific section became useless.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than parse options manually, which is both difficult to
read and error prone, parse options supplied to commit-tree
using the parse-options api.
It was discovered that the --no-gpg-sign option was documented
but not implemented in commit 70ddbd7767 (commit-tree: add missing
--gpg-sign flag, 2019-01-19), and the existing implementation
would attempt to translate the option as a tree oid. It was also
suggested earlier in commit 55ca3f99ae (commit-tree: add and document
--no-gpg-sign, 2013-12-13) that commit-tree should be migrated to
utilize the parse-options api, which could help prevent mistakes
like this in the future. Hence this change.
Also update the documentation to better describe that mixing
`-m` and `-F` options will correctly compose commit log messages in the
order in which the options are given.
In the process, mark various strings for translation.
Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even though the newer "--type=color" option to "git config" is meant
to be upward compatible with the traditional "--get-color" option,
unlike the latter, its output is not an incomplete line that lack
the LF at the end. That makes it consistent with output of other
types like "git config --type=bool".
Document it, as it sometimes surprises unsuspecting users.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unify RPC code for smart http in protocol v0/v1 and v2, which fixes
a bug in the latter (lack of authentication retry) and generally
improves the code base.
* jt/http-auth-proto-v2-fix:
remote-curl: use post_rpc() for protocol v2 also
remote-curl: refactor reading into rpc_state's buf
remote-curl: reduce scope of rpc_state.result
remote-curl: reduce scope of rpc_state.stdin_preamble
remote-curl: reduce scope of rpc_state.argv
|
|
"git diff --no-index" may still want to access Git goodies like
--ext-diff and --textconv, but so far these have been ignored,
which has been corrected.
* jk/diff-no-index-initialize:
diff: reuse diff setup for --no-index case
|
|
Unused code removal.
* nd/no-more-check-racy:
Delete check-racy.c
|
|
Doc update.
* rd/doc-hook-used-in-sample:
mention use of "hooks.allownonascii" in "man githooks"
|
|
Second batch to teach the diff machinery to use the parse-options
API.
* nd/diff-parseopt-2: (21 commits)
diff-parseopt: convert --ignore-some-changes
diff-parseopt: convert --[no-]minimal
diff-parseopt: convert --relative
diff-parseopt: convert --no-renames|--[no--rename-empty
diff-parseopt: convert --find-copies-harder
diff-parseopt: convert -C|--find-copies
diff-parseopt: convert -D|--irreversible-delete
diff-parseopt: convert -M|--find-renames
diff-parseopt: convert -B|--break-rewrites
diff-parseopt: convert --output-*
diff-parseopt: convert --[no-]compact-summary
diff-parseopt: convert --stat*
diff-parseopt: convert -s|--no-patch
diff-parseopt: convert --name-status
diff-parseopt: convert --name-only
diff-parseopt: convert --patch-with-stat
diff-parseopt: convert --summary
diff-parseopt: convert --check
diff-parseopt: convert --dirstat and friends
diff-parseopt: convert --numstat and --shortstat
...
|
|
Doc update.
* en/merge-options-doc:
merge-options.txt: correct wording of --no-commit option
|
|
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
|
|
Memfix.
* ab/receive-pack-use-after-free-fix:
receive-pack: fix use-after-free bug
|
|
Doc update.
* dl/doc-submodule-wo-subcommand:
submodule: document default behavior
|
|
Code clean-up.
* jk/unused-params:
ref-filter: drop unused "sz" parameters
ref-filter: drop unused "obj" parameters
ref-filter: drop unused buf/sz pairs
files-backend: drop refs parameter from split_symref_update()
pack-objects: drop unused parameter from oe_map_new_pack()
merge-recursive: drop several unused parameters
diff: drop complete_rewrite parameter from run_external_diff()
diff: drop unused emit data parameter from sane_truncate_line()
diff: drop unused color reset parameters
diff: drop options parameter from diffcore_fix_diff_index()
|
|
"git prune" has been taught to take advantage of reachability
bitmap when able.
* jk/prune-optim:
t5304: rename "sha1" variables to "oid"
prune: check SEEN flag for reachability
prune: use bitmaps for reachability traversal
prune: lazily perform reachability traversal
|
|
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
|
|
Doc update.
* js/doc-symref-in-proto-v1:
protocol-capabilities.txt: document symref
|
|
Split-index fix.
* nd/split-index-null-base-fix:
read-cache.c: fix writing "link" index ext with null base oid
|
|
"git prune-packed" did not notice and complain against excess
arguments given from the command line, which now it does.
* rj/prune-packed-excess-args:
prune-packed: check for too many arguments
|
|
Test doc update.
* jc/test-yes-doc:
test: caution on our version of 'yes'
|
|
Output from "diff --cc" did not show the original paths when the
merge involved renames. A new option adds the paths in the
original trees to the output.
* en/combined-all-paths:
log,diff-tree: add --combined-all-paths option
|
|
Update the implementation of pack-redundant for performance in a
repository with many packfiles.
* sc/pack-redundant:
pack-redundant: consistent sort method
pack-redundant: rename pack_list.all_objects
pack-redundant: new algorithm to find min packs
pack-redundant: delete redundant code
pack-redundant: delay creation of unique_objects
t5323: test cases for git-pack-redundant
|
|
"git branch" learned a new subcommand "--show-current".
* du/branch-show-current:
branch: introduce --show-current display option
|
|
Command-line completion (in contrib/) learned to tab-complete the
"git submodule absorbgitdirs" subcommand.
* dl/complete-submodule-absorbgitdirs:
completion: complete git submodule absorbgitdirs
|
Jeff King
Josh Steadmon
Junio C Hamano
Alexander Shopov
Johannes Schindelin
Brandon Richardson