| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When we create an http active_request_slot, we can set its
"results" pointer back to local storage. The http code will
fill in the details of how the request went, and we can
access those details even after the slot has been cleaned
up.
Commit 8809703 (http: factor out http error code handling)
switched us from accessing our local results struct directly
to accessing it via the "results" pointer of the slot. That
means we're accessing the slot after it has been marked as
finished, defeating the whole purpose of keeping the results
storage separate.
Most of the time this doesn't matter, as finishing the slot
does not actually clean up the pointer. However, when using
curl's multi interface with the dumb-http revision walker,
we might actually start a new request before handing control
back to the original caller. In that case, we may reuse the
slot, zeroing its results pointer, and leading the original
caller to segfault while looking for its results inside the
slot.
Instead, we need to pass a pointer to our local results
storage to the handle_curl_result function, rather than
relying on the pointer in the slot struct. This matches what
the original code did before the refactoring (which did not
use a separate function, and therefore just accessed the
results struct directly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the smart-http GET requests go through the http_get_*
functions, which will prompt for credentials and retry if we
see an HTTP 401.
POST requests, however, do not go through any central point.
Moreover, it is difficult to retry in the general case; we
cannot assume the request body fits in memory or is even
seekable, and we don't know how much of it was consumed
during the attempt.
Most of the time, this is not a big deal; for both fetching
and pushing, we make a GET request before doing any POSTs,
so typically we figure out the credentials during the first
request, then reuse them during the POST. However, some
servers may allow a client to get the list of refs from
receive-pack without authentication, and then require
authentication when the client actually tries to POST the
pack.
This is not ideal, as the client may do a non-trivial amount
of work to generate the pack (e.g., delta-compressing
objects). However, for a long time it has been the
recommended example configuration in git-http-backend(1) for
setting up a repository with anonymous fetch and
authenticated push. This setup has always been broken
without putting a username into the URL. Prior to commit
986bbc0, it did work with a username in the URL, because git
would prompt for credentials before making any requests at
all. However, post-986bbc0, it is totally broken. Since it
has been advertised in the manpage for some time, we should
make sure it works.
Unfortunately, it is not as easy as simply calling post_rpc
again when it fails, due to the input issue mentioned above.
However, we can still make this specific case work by
retrying in two specific instances:
1. If the request is large (bigger than LARGE_PACKET_MAX),
we will first send a probe request with a single flush
packet. Since this request is static, we can freely
retry it.
2. If the request is small and we are not using gzip, then
we have the whole thing in-core, and we can freely
retry.
That means we will not retry in some instances, including:
1. If we are using gzip. However, we only do so when
calling git-upload-pack, so it does not apply to
pushes.
2. If we have a large request, the probe succeeds, but
then the real POST wants authentication. This is an
extremely unlikely configuration and not worth worrying
about.
While it might be nice to cover those instances, doing so
would be significantly more complex for very little
real-world gain. In the long run, we will be much better off
when curl learns to internally handle authentication as a
callback, and we can cleanly handle all cases that way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of our http requests go through the http_request()
interface, which does some nice post-processing on the
results. In particular, it handles prompting for missing
credentials as well as approving and rejecting valid or
invalid credentials. Unfortunately, it only handles GET
requests. Making it handle POSTs would be quite complex, so
let's pull result handling code into its own function so
that it can be reused from the POST code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some sites set up http access to repositories such that
fetching is anonymous and unauthenticated, but pushing is
authenticated. While there are multiple ways to do this, the
technique advertised in the git-http-backend manpage is to
block access to locations matching "/git-receive-pack$".
Let's emulate that advice in our test setup, which makes it
clear that this advice does not actually work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not currently test authentication over smart-http at
all. In theory, it should work exactly as it does for dumb
http (which we do test). It does indeed work for these
simple tests, but this patch lays the groundwork for more
complex tests in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not currently test authentication for smart-http repos
at all. Part of the infrastructure to do this is recognizing
that auth/smart is indeed a smart-http repo.
The current apache config recognizes only "^/smart/*" as
smart-http. Let's instead treat anything with /smart/ in the
URL as smart-http. This is obviously a stupid thing to do
for a real production site, but for our test suite we know
that our repositories will not have this magic string in the
name.
Note that we will route /foo/smart/bar.git directly to
git-http-backend/bar.git; in other words, everything before
the "/smart/" is irrelevant to finding the repo on disk (but
may impact apache config, for example by triggering auth
checks).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our test apache config points all of auth/ directly to the
on-disk repositories via an Alias directive. This works fine
because everything authenticated is currently in auth/dumb,
which is a subset. However, this would conflict with a
ScriptAlias for auth/smart (which will come in future
patches), so let's narrow the Alias.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The t5550 script sets up a nice askpass helper for
simulating user input and checking what git prompted for.
Let's make it available to other http scripts by migrating
it to lib-httpd.
We can use this immediately in t5540 to make our tests more
robust (previously, we did not check at all that hitting the
password-protected repo actually involved a password).
Unfortunately, we end up failing the test because the
current code erroneously prompts twice (once for
git-remote-http, and then again when the former spawns
git-http-push).
More importantly, though, it will let us easily add
smart-http authentication tests in t5541 and t5551; we
currently do not test smart-http authentication at all.
As part of making it generic, let's always look for and
store auxiliary askpass files at the top-level trash
directory; this makes it compatible with t5540, which runs
some tests from sub-repositories. We can abstract away the
ugliness with a short helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In most of our tests, we put repos to be accessed by dumb
protocols in /dumb, and repos to be accessed by smart
protocols in /smart. In our test apache setup, the whole
/auth hierarchy requires authentication. However, we don't
bother to split it by smart and dumb here because we are not
currently testing smart-http authentication at all.
That will change in future patches, so let's be explicit
that we are interested in testing dumb access here. This
also happens to match what t5540 does for the push tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option to autosquash is only used in case of an interactive rebase.
When merges are preserved, rebase uses an interactive rebase internally,
but in this case autosquash should still be disabled.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-export" did not give a readable error message when the same
mark erroneously appeared twice in the --import-marks input.
|
|
Cc: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git rebase" was given a bad commit to replay the history on,
its error message did not correctly give the command line argument
it had trouble parsing.
By Erik Faye-Lund
* ef/maint-rebase-error-message:
rebase: report invalid commit correctly
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A minor compilation fix.
By Erik Faye-Lund
* ef/http-o-depends-on-gvf:
Makefile: add missing GIT-VERSION-FILE dependency
|
|
"git grep -e '$pattern'", unlike the case where the patterns are read from
a file, did not treat individual lines in the given pattern argument as
separate regular expressions as it should.
By René Scharfe
* rs/maint-grep-F:
grep: stop leaking line strings with -f
grep: support newline separated pattern list
grep: factor out do_append_grep_pat()
grep: factor out create_grep_pat()
|
|
An author/committer name that is a single character was mishandled as an
invalid name by mistake.
By Jeff King
* jk/ident-split-fix:
fix off-by-one error in split_ident_line
|
|
By Jeff King
* jk/pretty-commit-header-incomplete-line:
avoid segfault when reading header of malformed commits
|
|
By Jeff King
* jk/format-person-part-buffer-limit:
pretty: avoid buffer overflow in format_person_part
|
|
"git checkout" gave progress display even when the standard error
stream was not connected to the tty, which made little sense.
By Avery Pennarun
* ap/checkout-no-progress-for-non-tty:
checkout: no progress messages if !isatty(2).
|
|
By Peter Krefting
via Peter Krefting
* 'maint' of git://github.com/git-l10n/git-po:
Update Swedish translation (728t0f0u)
|
|
In 20fc9bc (Set HTTP user agent to git/GIT_VERSION, 2006-04-04),
http.o started recording GIT_VERSION, but http.o wasn't added
to the list of files that depends on GIT-VERSION-FILE.
Fix this, so mofications to GIT-VERSION-FILE will result in an
updated user-agent string.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 9765b6a (rebase: align variable content, 2011-02-06), the code
to error out was moved up one level. Unfortunately, one reference
to a function parameter wasn't rewritten as it should, leading to
the wrong parameter being errored on.
This error was propagated by 71786f5 (rebase: factor out reference
parsing, 2011-02-06) and merged in 78c6e0f (Merge branch
'mz/rebase', 2011-04-28).
Correct this by reporting $onto_name istead.
Reported-By: Manuela Hutter <manuelah@opera.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a submodule repository uses alternate object store mechanism, some
commands that were started from the superproject did not notice it and
failed with "No such object" errors. The subcommands of "git submodule"
command that recursed into the submodule in a separate process were OK;
only the ones that cheated and peeked directly into the submodule's
repository from the primary process were affected.
By Heiko Voigt
* hv/submodule-alt-odb:
teach add_submodule_odb() to look for alternates
|
|
The directory path used in "git diff --no-index", when it recurses
down, was broken with a recent update after v1.7.10.1 release.
By Bobby Powers
* bp/diff-no-index-strbuf-fix:
diff --no-index: don't leak buffers in queue_diff
diff --no-index: reset temporary buffer lengths on directory iteration
|
|
When adding the information from a tag, put an empty line between the
message of the tag and the commented-out signature verification
information.
At least for the kernel workflow, I often end up re-formatting the message
that people send me in the tag data. In that situation, putting the tag
message and the tag signature verification back-to-back then means that
normal editor "reflow parapgraph" command will get confused and think that
the signature is a continuation of the last message paragraph.
So I always end up having to first add an empty line, and then go back and
reflow the last paragraph. Let's just do it in git directly.
The extra vertical space also makes the verification visually stand out
more from the user-supplied message, so it looks a bit more readable to me
too, but that may be just an odd personal preference.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
From the FILES section of the git-config(1) manual:
$GIT_DIR/config::
Repository specific configuration file. (The filename is
of course relative to the repository root, not the working
directory.)
That's confusing because $GIT_DIR really is relative to the working
directory.
$ GIT_DIR=.git GIT_EDITOR='pwd; echo editing'
$ export GIT_DIR GIT_EDITOR
$ git config --edit --local
/home/jrn/src/git/Documentation
editing .git/config
It turns out that the comment is a remnant from older days when the
heading said ".git/config" (which is indeed relative to the top of the
worktree).
It was only when the heading was changed to refer more precisely to
<git dir>/config (see v1.5.3.2~18, AsciiDoc tweak to avoid leading
dot, 2007-09-14) that the parenthesis stopped making sense. Remove
it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status --porcelain" ignored "--branch" option by mistake. The output
for "git status --branch -z" was also incorrect and did not terminate the
record for the current branch name with NUL as asked.
By Jeff King
* jk/maint-status-porcelain-z-b:
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
|
|
If stderr isn't a tty, we shouldn't be printing incremental progress
messages. In particular, this affects 'git checkout -f . >&logfile'
unless you provided -q. And git-new-workdir has no way to provide -q.
It would probably be better to have progress.c check isatty(2) all the time,
but that wouldn't allow things like 'git push --progress' to force progress
reporting to on, so I won't try to solve the general case right now.
Actual fix suggested by Jeff King.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default compiler and cflags were mostly "works for me"
when I built the original version. We need to be much less
careful here than usual, because we know we are building
only on OS X. But it's only polite to at least respect the
CFLAGS and CC definitions that the user may have provided
earlier.
While we're at it, let's update our definitions and rules to
be more like the top-level Makefile; default our CFLAGS to
include -O2, and make sure we use CFLAGS and LDFLAGS when
linking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a commit object has a header line at the end of the
buffer that is missing its newline (or if it appears so
because the content on the header line contains a stray
NUL), then git will segfault.
Interestingly, this case is explicitly handled and we do
correctly scan the final line for the header we are looking
for. But if we don't find it, we will dereference NULL while
trying to look at the next line.
Git will never generate such a commit, but it's good to be
defensive. We could die() in such a case, but since it's
easy enough to handle it gracefully, let's just issue a
warning and continue (so you could still view such a commit
with "git show", though you might be missing headers after
the NUL).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we parse the name and email from a commit to
pretty-print them, we usually can just put the result
directly into our strbuf result. However, if we are going to
use the mailmap, then we must first copy them into a
NUL-terminated buffer to feed to the mailmap machinery.
We did so by using strlcpy into a static buffer, but we used
it wrong. We fed it the length of the substring we wanted to
copy, but never checked that that length was less than the
size of the destination buffer.
The simplest fix is to just use snprintf to copy the
substring properly while still respecting the destination
buffer's size. It might seem like replacing the static
buffer with a strbuf would help, but we need to feed a
static buffer to the mailmap machinery anyway, so there's
not much benefit to handling arbitrary sizes.
A more ideal solution would be for mailmap to grow an
interface that:
1. Takes a pointer and length combination, instead of
assuming a NUL-terminated string.
2. Returns a pointer to the mailmap's allocated string,
rather than copying it into the buffer.
Then we could avoid the need for an extra buffer entirely.
However, doing this would involve a lot of refactoring of
mailmap and of string_list (which mailmap uses to store the
map itself). For now, let's do the simplest thing to fix the
bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 4b340cf split the logic to parse an ident line out of
pretty.c's format_person_part. But in doing so, it
accidentally introduced an off-by-one error that caused it
to think that single-character names were invalid.
This manifested itself as the "%an" format failing to show
anything at all for a single-character name.
Reported-by: Brian Turner <bturner@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When reading patterns from a file, we pass the lines as allocated string
buffers to append_grep_pat() and never free them. That's not a problem
because they are needed until the program ends anyway.
However, now that the function duplicates the pattern string, we can
reuse the strbuf after calling that function. This simplifies the code
a bit and plugs a minor memory leak.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, patterns that contain newline characters don't match anything
when given to git grep. Regular grep(1) interprets patterns as lists of
newline separated search strings instead.
Implement this functionality by creating and inserting extra grep_pat
structures for patterns consisting of multiple lines when appending to
the pattern lists. For simplicity, all pattern strings are duplicated.
The original pattern is truncated in place to make it contain only the
first line.
Requested-by: Torne (Richard Coles) <torne@google.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add do_append_grep_pat() as a shared function for adding patterns to
the header pattern list and the general pattern list.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add create_grep_pat(), a shared helper for all grep pattern allocation
and initialization needs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We fairly consistently say "superproject" and never "supermodule" these
days. But there are seven occurrences of "supermodule" left in the current
work tree. Three appear in Release Notes for 1.5.3 and 1.7.7, three in
test names and one in a C-code comment.
Replace all occurrences of "supermodule" outside of the Release Notes
(which shouldn't be changed after the fact) with "superproject" for
consistency.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test case shows a bug in 'rebase -p', but even if the bug were fixed
the test would fail because it did not ensure that the preconditions match
the postconditions that were checked. Insert the suitable 'git checkout'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
queue_diff uses two strbufs, and at the end of the function
strbuf_reset was called. This only reset the length of the buffer -
any allocated memory was leaked. Using strbuf_release fixes this.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 875b91b (diff --no-index: use strbuf for temporary pathnames,
2012-04-25) introduced a regression when using diff --no-index with
directories. When iterating through a directory, the switch to strbuf
from heap-allocated char arrays caused paths to form like 'dir/file1',
'dir/file1file2', rather than 'dir/file1', 'dir/file2' as expected.
Avoid this by resetting the paths variables to their original length
before each iteration.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Translate 3 new messages for upcoming git 1.7.10.3.
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
|
|
Translate 3 new messages for upcoming git 1.7.10.3.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Generate po/git.pot from v1.7.10.2-35-g0b9f4:
* 3 new l10n messages at lines: 2743, 2751, 2759.
* 2 removed l10n messages from lines: 1879, 2757.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Since we allow to link other object databases when loading a submodules
database we should also load possible alternates.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Vincent van Ravesteijn
Johannes Schindelin
Erik Faye-Lund
Peter Krefting
Linus Torvalds
Jonathan Nieder
Avery Pennarun
René Scharfe
Jens Lehmann
Johannes Sixt
Bobby Powers
Ralf Thielow
Jiang Xin
Heiko Voigt