| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We do not usually end our errors with a full stop, but it
looks especially bad when you use die_errno, which adds a
colon, like:
fatal: could not create work tree dir 'foo'.: No such file or directory
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If clone fails, we generally try to clean up any directories
we've created. We do this by installing an atexit handler,
so that we don't have to manually trigger cleanup. However,
since we install this after touching the filesystem, any
errors between our initial mkdir() and our atexit() call
will result in us leaving a crufty directory around.
We can fix this by moving our atexit() call earlier. It's OK
to do it before the junk_work_tree variable is set, because
remove_junk makes sure the variable is initialized. This
means we "activate" the handler by assigning to the
junk_work_tree variable, which we now bump down to just
after we call mkdir(). We probably do not want to do it
before, because a plausible reason for mkdir() to fail is
EEXIST (i.e., we are racing with another "git init"), and we
would not want to remove their work.
OTOH, this is probably not that big a deal; we will allow
cloning into an empty directory (and skip the mkdir), which
is already racy (i.e., one clone may see the other's empty
dir and start writing into it). Still, it does not hurt to
err on the side of caution here.
Note that writing into junk_work_tree and junk_git_dir after
installing the handler is also technically racy, as we call
our handler on an async signal. Depending on the platform,
we could see a sheared write to the variables. Traditionally
we have not worried about this, and indeed we already do
this later in the function. If we want to address that, it
can come as a separate topic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.9:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* maint-1.8.5:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
* jk/dotgit-case-maint-1.8.5:
is_hfs_dotgit: loosen over-eager match of \u{..47}
|
|
Our is_hfs_dotgit function relies on the hackily-implemented
next_hfs_char to give us the next character that an HFS+
filename comparison would look at. It's hacky because it
doesn't implement the full case-folding table of HFS+; it
gives us just enough to see if the path matches ".git".
At the end of next_hfs_char, we use tolower() to convert our
32-bit code point to lowercase. Our tolower() implementation
only takes an 8-bit char, though; it throws away the upper
24 bits. This means we can't have any false negatives for
is_hfs_dotgit. We only care about matching 7-bit ASCII
characters in ".git", and we will correctly process 'G' or
'g'.
However, we _can_ have false positives. Because we throw
away the upper bits, code point \u{0147} (for example) will
look like 'G' and get downcased to 'g'. It's not known
whether a sequence of code points whose truncation ends up
as ".git" is meaningful in any language, but it does not
hurt to be more accurate here. We can just pass out the full
32-bit code point, and compare it manually to the upper and
lowercase characters we care about.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.9:
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.8.5:
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dotgit-case-maint-1.8.5:
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
Now that the index can block pathnames that can be mistaken
to mean ".git" on NTFS and FAT32, it would be helpful for
fsck to notice such problematic paths. This lets servers
which use receive.fsckObjects block them before the damage
spreads.
Note that the fsck check is always on, even for systems
without core.protectNTFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
NTFS.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on NTFS themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git or git~1, meaning mischief is almost
certainly what the tree author had in mind).
Ideally these would be controlled by a separate
"fsck.protectNTFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not allow paths with a ".git" component to be added to
the index, as that would mean repository contents could
overwrite our repository files. However, asking "is this
path the same as .git" is not as simple as strcmp() on some
filesystems.
On NTFS (and FAT32), there exist so-called "short names" for
backwards-compatibility: 8.3 compliant names that refer to the same files
as their long names. As ".git" is not an 8.3 compliant name, a short name
is generated automatically, typically "git~1".
Depending on the Windows version, any combination of trailing spaces and
periods are ignored, too, so that both "git~1." and ".git." still refer
to the Git directory. The reason is that 8.3 stores file names shorter
than 8 characters with trailing spaces. So literally, it does not matter
for the short name whether it is padded with spaces or whether it is
shorter than 8 characters, it is considered to be the exact same.
The period is the separator between file name and file extension, and
again, an empty extension consists just of spaces in 8.3 format. So
technically, we would need only take care of the equivalent of this
regex:
(\.git {0,4}|git~1 {0,3})\. {0,3}
However, there are indications that at least some Windows versions might
be more lenient and accept arbitrary combinations of trailing spaces and
periods and strip them out. So we're playing it real safe here. Besides,
there can be little doubt about the intention behind using file names
matching even the more lenient pattern specified above, therefore we
should be fine with disallowing such patterns.
Extra care is taken to catch names such as '.\\.git\\booh' because the
backslash is marked as a directory separator only on Windows, and we want
to use this new helper function also in fsck on other platforms.
A big thank you goes to Ed Thomson and an unnamed Microsoft engineer for
the detailed analysis performed to come up with the corresponding fixes
for libgit2.
This commit adds a function to detect whether a given file name can refer
to the Git directory by mistake.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the index can block pathnames that case-fold to
".git" on HFS+, it would be helpful for fsck to notice such
problematic paths. This lets servers which use
receive.fsckObjects block them before the damage spreads.
Note that the fsck check is always on, even for systems
without core.protectHFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
HFS+.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on HFS+ themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git with invisible Unicode code-points mixed
in, meaning mischief is almost certainly what the tree
author had in mind).
Ideally these would be controlled by a separate
"fsck.protectHFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not allow paths with a ".git" component to be added to
the index, as that would mean repository contents could
overwrite our repository files. However, asking "is this
path the same as .git" is not as simple as strcmp() on some
filesystems.
HFS+'s case-folding does more than just fold uppercase into
lowercase (which we already handle with strcasecmp). It may
also skip past certain "ignored" Unicode code points, so
that (for example) ".gi\u200ct" is mapped ot ".git".
The full list of folds can be found in the tables at:
https://www.opensource.apple.com/source/xnu/xnu-1504.15.3/bsd/hfs/hfscommon/Unicode/UCStringCompareData.h
Implementing a full "is this path the same as that path"
comparison would require us importing the whole set of
tables. However, what we want to do is much simpler: we
only care about checking ".git". We know that 'G' is the
only thing that folds to 'g', and so on, so we really only
need to deal with the set of ignored code points, which is
much smaller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We complain about ".git" in a tree because it cannot be
loaded into the index or checked out. Since we now also
reject ".GIT" case-insensitively, fsck should notice the
same, so that errors do not propagate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check that fsck notices and complains about confusing
paths in trees. However, there are a few shortcomings:
1. We check only for these paths as file entries, not as
intermediate paths (so ".git" and not ".git/foo").
2. We check "." and ".." together, so it is possible that
we notice only one and not the other.
3. We repeat a lot of boilerplate.
Let's use some loops to be more thorough in our testing, and
still end up with shorter code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not allow ".git" to enter into the index as a path
component, because checking out the result to the working
tree may causes confusion for subsequent git commands.
However, on case-insensitive file systems, ".Git" or ".GIT"
is the same. We should catch and prevent those, too.
Note that technically we could allow this for repos on
case-sensitive filesystems. But there's not much point. It's
unlikely that anybody cares, and it creates a repository
that is unexpectedly non-portable to other systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We should prevent nonsense paths from entering the index in
the first place, as they can cause confusing results if they
are ever checked out into the working tree. We already do
so, but we never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When unpack_trees tries to write an entry to the index,
add_index_entry may report an error to stderr, but we ignore
its return value. This leads to us returning a successful
exit code for an operation that partially failed. Let's make
sure to propagate this code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.9:
git-tag.txt: Add a missing hyphen to `-s`
|
|
* maint-1.8.5:
git-tag.txt: Add a missing hyphen to `-s`
|
|
Signed-off-by: Wieland Hoffmann <themineo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test case "--amend option copies authorship" specifies that the
git-commit option `--amend` uses the authorship of the replaced
commit for the new commit. Add the omitted check that this property
actually holds.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once upon a time, git-log was just "rev-list | diff-tree",
and we did not bother to test it separately. These days git-log
is implemented internally, but we want to make sure that the
rev-list to diff-tree pipeline continues to function. Let's
add a basic sanity test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/alloc-commit-id-maint:
diff-tree: avoid lookup_unknown_object
object_as_type: set commit index
alloc: factor out commit index
add object_as_type helper for casting objects
parse_object_buffer: do not set object type
move setting of object->type to alloc_* functions
alloc: write out allocator definitions
alloc.c: remove the alloc_raw_commit_node() function
|
|
We generally want to avoid lookup_unknown_object, because it
results in allocating more memory for the object than may be
strictly necessary.
In this case, it is used to check whether we have an
already-parsed object before calling parse_object, to save
us from reading the object from disk. Using lookup_object
would be fine for that purpose, but we can take it a step
further. Since this code was written, parse_object already
learned the "check lookup_object" optimization, so we can
simply call parse_object directly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of the "index" field of struct commit is that
every allocated commit would have one. It is supposed to be
an invariant that whenever object->type is set to
OBJ_COMMIT, we have a unique index.
Commit 969eba6 (commit: push commit_index update into
alloc_commit_node, 2014-06-10) covered this case for
newly-allocated commits. However, we may also allocate an
"unknown" object via lookup_unknown_object, and only later
convert it to a commit. We must make sure that we set the
commit index when we switch the type field.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We keep a static counter to set the commit index on newly
allocated objects. However, since we also need to set the
index on any_objects which are converted to commits, let's
make the counter available as a public function.
While we're moving it, let's make sure the counter is
allocated as an unsigned integer to match the index field in
"struct commit".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we call lookup_commit, lookup_tree, etc, the logic goes
something like:
1. Look for an existing object struct. If we don't have
one, allocate and return a new one.
2. Double check that any object we have is the expected
type (and complain and return NULL otherwise).
3. Convert an object with type OBJ_NONE (from a prior
call to lookup_unknown_object) to the expected type.
We can encapsulate steps 2 and 3 in a helper function which
checks whether we have the expected object type, converts
OBJ_NONE as appropriate, and returns the object.
Not only does this shorten the code, but it also provides
one central location for converting OBJ_NONE objects into
objects of other types. Future patches will use that to
enforce type-specific invariants.
Since this is a refactoring, we would want it to behave
exactly as the current code. It takes a little reasoning to
see that this is the case:
- for lookup_{commit,tree,etc} functions, we are just
pulling steps 2 and 3 into a function that does the same
thing.
- for the call in peel_object, we currently only do step 3
(but we want to consolidate it with the others, as
mentioned above). However, step 2 is a noop here, as the
surrounding conditional makes sure we have OBJ_NONE
(which we want to keep to avoid an extraneous call to
sha1_object_info).
- for the call in lookup_commit_reference_gently, we are
currently doing step 2 but not step 3. However, step 3
is a noop here. The object we got will have just come
from deref_tag, which must have figured out the type for
each object in order to know when to stop peeling.
Therefore the type will never be OBJ_NONE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only way that "obj" can be non-NULL is if it came from
one of the lookup_* functions. These functions always ensure
that the object has the expected type (and return NULL
otherwise), so there is no need for us to set the type.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "struct object" type implements basic object
polymorphism. Individual instances are allocated as
concrete types (or as a union type that can store any
object), and a "struct object *" can be cast into its real
type after examining its "type" enum. This means it is
dangerous to have a type field that does not match the
allocation (e.g., setting the type field of a "struct blob"
to "OBJ_COMMIT" would mean that a reader might read past the
allocated memory).
In most of the current code this is not a problem; the first
thing we do after allocating an object is usually to set its
type field by passing it to create_object. However, the
virtual commits we create in merge-recursive.c do not ever
get their type set. This does not seem to have caused
problems in practice, though (presumably because we always
pass around a "struct commit" pointer and never even look at
the type).
We can fix this oversight and also make it harder for future
code to get it wrong by setting the type directly in the
object allocation functions.
This will also make it easier to fix problems with commit
index allocation, as we know that any object allocated by
alloc_commit_node will meet the invariant that an object
with an OBJ_COMMIT type field will have a unique index
number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because the allocator functions for tree, blobs, etc are all
very similar, we originally used a macro to avoid repeating
ourselves. Since the prior commit, though, the heavy lifting
is done by an inline helper function. The macro does still
save us a few lines, but at some readability cost. It
obfuscates the function definitions (and makes them hard to
find via grep).
Much worse, though, is the fact that it isn't used
consistently for all allocators. Somebody coming later may
be tempted to modify DEFINE_ALLOCATOR, but they would miss
alloc_commit_node, which is treated specially.
Let's just drop the macro and write everything out
explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to encapsulate the setting of the unique commit index, commit
969eba63 ("commit: push commit_index update into alloc_commit_node",
10-06-2014) introduced a (logically private) intermediary allocator
function. However, this function (alloc_raw_commit_node()) was declared
as a public function, which undermines its entire purpose.
Introduce an inline function, alloc_node(), which implements the main
logic of the allocator used by DEFINE_ALLOCATOR, and redefine the macro
in terms of the new function. In addition, use the new function in the
implementation of the alloc_commit_node() allocator, rather than the
intermediary allocator, which can now be removed.
Noticed by sparse ("symbol 'alloc_raw_commit_node' was not declared.
Should it be static?").
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Google mail has had the extension @googlemail.com for a long time
in Germany as @gmail.de was already taken by a competitor.
Nowadays the original gmail company isn't there anymore(?), hence
Googlemail also introduced @gmail.com in Germany, which I switched to.
This changed mail address of mine first appeared in 398dd4bd039680b
(2014-07-10, .mailmap: map different names with the same email
address together) ironically.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to http://meta.ohloh.net/2014/07/black-duck-open-hub/
the site name of ohloh changed to openhub.
Change the man page accordingly.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ah/fix-http-push:
http-push.c: make CURLOPT_IOCTLDATA a usable pointer
|
|
* po/error-message-style:
doc: give some guidelines for error messages
|
|
* zk/log-graph-showsig:
log: fix indentation for --graph --show-signature
|
|
* mg/fix-log-mergetag-color:
log: correctly identify mergetag signature verification status
|
|
* cb/filter-branch-prune-empty-degenerate-merges:
filter-branch: eliminate duplicate mapped parents
|
|
* ye/doc-http-proto:
http-protocol.txt: Basic Auth is defined in RFC 2617, not RFC 2616
|
|
* jm/api-strbuf-doc:
api-strbuf.txt minor typos
|
|
* jm/dedup-test-config:
t/t7810-grep.sh: remove duplicate test_config()
|
|
* sk/test-cmp-bin:
t5000, t5003: do not use test_cmp to compare binary files
|
Jeff King
Junio C Hamano
Johannes Schindelin
Wieland Hoffmann
Fabian Ruch
Ramsay Jones
Stefan Beller