Age | Commit message (Collapse) | Author | Files | Lines |
|
In previous changes, we've turned on warning for quoted CR in base64 or
quoted-printable email messages. Some projects see those quoted CR a lot,
they know that it happens most of the time, and they find it's desirable
to always strip those CR.
Those projects in question usually fall back to use other tools to handle
patches when receive such patches.
Let's help those projects handle those patches by stripping those
excessive CR.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In previous change, Git starts to warn for quoted CRLF in decoded
base64/QP email. Despite those warnings are usually helpful,
quoted CRLF could be part of some users' workflow.
Let's give them an option to turn off the warning completely.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When SMTP servers receive 8-bit email messages, possibly with only
LF as line ending, some of them decide to change said LF to CRLF.
Some mailing list softwares, when receive 8-bit email messages,
decide to encode those messages in base64 or quoted-printable.
If an email is transfered through above mail servers, then distributed
by such mailing list softwares, the recipients will receive an email
contains a patch mungled with CRLF encoded inside another encoding.
Thus, such CR (in CRLF) couldn't be dropped by "mailsplit".
Hence, the mailed patch couldn't be applied cleanly.
Such accidents have been observed in the wild [1].
Instead of silently rejecting those messages, let's give our users
some warnings if such CR (as part of CRLF) is found.
[1]: https://nmbug.notmuchmail.org/nmweb/show/m2lf9ejegj.fsf%40guru.guru-group.fi
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a later change, mailinfo will learn more options, let's switch to our
robust parse_options framework before that step.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a later change, we will use parse_option to parse mailinfo's options.
In mailinfo, both "-u", "-n", and "--encoding" try to set the same
field, with "-u" reset that field to some default value from
configuration variable "i18n.commitEncoding".
Let's delay the setting of that field until we finish processing all
options. By doing that, "i18n.commitEncoding" can be parsed on demand.
More importantly, it cleans the way for using parse_option.
This change introduces some inconsistent brackets "{}" in "if/else if"
construct, however, we will rewrite them in the next few changes.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify that pathnames recorded in Git trees are most often (but
not necessarily) encoded in UTF-8.
* ab/pathname-encoding-doc:
doc: clarify the filename encoding in git diff
|
|
Effort to make the command line completion (in contrib/) safe with
"set -u" continues.
* vs/completion-with-set-u:
completion: avoid aliased command lookup error in nounset mode
|
|
Show errno in the trace output in the error codepath that calls
read_raw_ref method.
* hn/refs-trace-errno:
refs: print errno for read_raw_ref if GIT_TRACE_REFS is set
|
|
The checkout machinery has been taught to perform the actual
write-out of the files in parallel when able.
* mt/parallel-checkout-part-2:
parallel-checkout: add design documentation
parallel-checkout: support progress displaying
parallel-checkout: add configuration options
parallel-checkout: make it truly parallel
unpack-trees: add basic support for parallel checkout
|
|
"git log" learned "--diff-merges=<style>" option, with an
associated configuration variable log.diffMerges.
* so/log-diff-merge:
doc/diff-options: document new --diff-merges features
diff-merges: introduce log.diffMerges config variable
diff-merges: adapt -m to enable default diff format
diff-merges: refactor set_diff_merges()
diff-merges: introduce --diff-merges=on
|
|
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
|
|
The prefetch task in "git maintenance" assumed that "git fetch"
from any remote would fetch all its local branches, which would
fetch too much if the user is interested in only a subset of
branches there.
* ds/maintenance-prefetch-fix:
maintenance: respect remote.*.skipFetchAll
maintenance: use 'git fetch --prefetch'
fetch: add --prefetch option
maintenance: simplify prefetch logic
|
|
"git push --quiet --set-upstream" was not quiet when setting the
upstream branch configuration, which has been corrected.
* ow/push-quiet-set-upstream:
transport: respect verbosity when setting upstream
|
|
When packet_write() fails, we gave an extra error message
unnecessarily, which has been corrected.
* mt/pkt-write-errors:
pkt-line: do not report packet write errors twice
|
|
Handling of "promisor packs" that allows certain objects to be
missing and lazily retrievable has been optimized (a bit).
* jk/promisor-optim:
revision: avoid parsing with --exclude-promisor-objects
lookup_unknown_object(): take a repository argument
is_promisor_object(): free tree buffer after parsing
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability fix.
* js/access-nul-emulation-on-windows:
msvc: avoid calling `access("NUL", flags)`
|
|
The dependencies for config-list.h and command-list.h were broken
when the former was split out of the latter, which has been
corrected.
* sg/bugreport-fixes:
Makefile: add missing dependencies of 'config-list.h'
|
|
Doc update for developers.
* jc/doc-do-not-capitalize-clarification:
doc: clarify "do not capitalize the first word" rule
|
|
Documentation updates, with unrelated comment updates, too.
* ab/usage-error-docs:
api docs: document that BUG() emits a trace2 error event
api docs: document BUG() in api-error-handling.txt
usage.c: don't copy/paste the same comment three times
|
|
Test clean-up.
* ab/detox-gettext-tests:
tests: remove all uses of test_i18cmp
|
|
* jt/fetch-pack-request-fix:
fetch-pack: buffer object-format with other args
|
|
Doc updte.
* hn/reftable-tables-doc-update:
reftable: document an alternate cleanup method on Windows
|
|
When "git pack-objects" makes a literal copy of a part of existing
packfile using the reachability bitmaps, its update to the progress
meter was broken.
* jk/pack-objects-bitmap-progress-fix:
pack-objects: update "nr_seen" progress based on pack-reused count
|
|
A bit of code clean-up and a lot of test clean-up around userdiff
area.
* ab/userdiff-tests:
blame tests: simplify userdiff driver test
blame tests: don't rely on t/t4018/ directory
userdiff: remove support for "broken" tests
userdiff tests: list builtin drivers via test-tool
userdiff tests: explicitly test "default" pattern
userdiff: add and use for_each_userdiff_driver()
userdiff style: normalize pascal regex declaration
userdiff style: declare patterns with consistent style
userdiff style: re-order drivers in alphabetical order
|
|
Userdiff patterns for "Scheme" has been added.
* ar/userdiff-scheme:
userdiff: add support for Scheme
|
|
AFAICT parsing the output of `git diff --name-only master...feature`
is the intended way of programmatically getting the list of files
modified
by a feature branch. It is impossible to parse text unless you know what
encoding it is in. The output encoding of diff --name-only and
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Original-patch-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make parallel checkout configurable by introducing two new settings:
checkout.workers and checkout.thresholdForParallelism. The first defines
the number of workers (where one means sequential checkout), and the
second defines the minimum number of entries to attempt parallel
checkout.
To decide the default value for checkout.workers, the parallel version
was benchmarked during three operations in the linux repo, with cold
cache: cloning v5.8, checking out v5.8 from v2.6.15 (checkout I) and
checking out v5.8 from v5.7 (checkout II). The four tables below show
the mean run times and standard deviations for 5 runs in: a local file
system on SSD, a local file system on HDD, a Linux NFS server, and
Amazon EFS (all on Linux). Each parallel checkout test was executed with
the number of workers that brings the best overall results in that
environment.
Local SSD:
Sequential 10 workers Speedup
Clone 8.805 s ± 0.043 s 3.564 s ± 0.041 s 2.47 ± 0.03
Checkout I 9.678 s ± 0.057 s 4.486 s ± 0.050 s 2.16 ± 0.03
Checkout II 5.034 s ± 0.072 s 3.021 s ± 0.038 s 1.67 ± 0.03
Local HDD:
Sequential 10 workers Speedup
Clone 32.288 s ± 0.580 s 30.724 s ± 0.522 s 1.05 ± 0.03
Checkout I 54.172 s ± 7.119 s 54.429 s ± 6.738 s 1.00 ± 0.18
Checkout II 40.465 s ± 2.402 s 38.682 s ± 1.365 s 1.05 ± 0.07
Linux NFS server (v4.1, on EBS, single availability zone):
Sequential 32 workers Speedup
Clone 240.368 s ± 6.347 s 57.349 s ± 0.870 s 4.19 ± 0.13
Checkout I 242.862 s ± 2.215 s 58.700 s ± 0.904 s 4.14 ± 0.07
Checkout II 65.751 s ± 1.577 s 23.820 s ± 0.407 s 2.76 ± 0.08
EFS (v4.1, replicated over multiple availability zones):
Sequential 32 workers Speedup
Clone 922.321 s ± 2.274 s 210.453 s ± 3.412 s 4.38 ± 0.07
Checkout I 1011.300 s ± 7.346 s 297.828 s ± 0.964 s 3.40 ± 0.03
Checkout II 294.104 s ± 1.836 s 126.017 s ± 1.190 s 2.33 ± 0.03
The above benchmarks show that parallel checkout is most effective on
repositories located on an SSD or over a distributed file system. For
local file systems on spinning disks, and/or older machines, the
parallelism does not always bring a good performance. For this reason,
the default value for checkout.workers is one, a.k.a. sequential
checkout.
To decide the default value for checkout.thresholdForParallelism,
another benchmark was executed in the "Local SSD" setup, where parallel
checkout showed to be beneficial. This time, we compared the runtime of
a `git checkout -f`, with and without parallelism, after randomly
removing an increasing number of files from the Linux working tree. The
"sequential fallback" column below corresponds to the executions where
checkout.workers was 10 but checkout.thresholdForParallelism was equal
to the number of to-be-updated files plus one (so that we end up writing
sequentially). Each test case was sampled 15 times, and each sample had
a randomly different set of files removed. Here are the results:
sequential fallback 10 workers speedup
10 files 772.3 ms ± 12.6 ms 769.0 ms ± 13.6 ms 1.00 ± 0.02
20 files 780.5 ms ± 15.8 ms 775.2 ms ± 9.2 ms 1.01 ± 0.02
50 files 806.2 ms ± 13.8 ms 767.4 ms ± 8.5 ms 1.05 ± 0.02
100 files 833.7 ms ± 21.4 ms 750.5 ms ± 16.8 ms 1.11 ± 0.04
200 files 897.6 ms ± 30.9 ms 730.5 ms ± 14.7 ms 1.23 ± 0.05
500 files 1035.4 ms ± 48.0 ms 677.1 ms ± 22.3 ms 1.53 ± 0.09
1000 files 1244.6 ms ± 35.6 ms 654.0 ms ± 38.3 ms 1.90 ± 0.12
2000 files 1488.8 ms ± 53.4 ms 658.8 ms ± 23.8 ms 2.26 ± 0.12
From the above numbers, 100 files seems to be a reasonable default value
for the threshold setting.
Note: Up to 1000 files, we observe a drop in the execution time of the
parallel code with an increase in the number of files. This is a rather
odd behavior, but it was observed in multiple repetitions. Above 1000
files, the execution time increases according to the number of files, as
one would expect.
About the test environments: Local SSD tests were executed on an
i7-7700HQ (4 cores with hyper-threading) running Manjaro Linux. Local
HDD tests were executed on an Intel(R) Xeon(R) E3-1230 (also 4 cores
with hyper-threading), HDD Seagate Barracuda 7200.14 SATA 3.1, running
Debian. NFS and EFS tests were executed on an Amazon EC2 c5n.xlarge
instance, with 4 vCPUs. The Linux NFS server was running on a m6g.large
instance with 2 vCPUSs and a 1 TB EBS GP2 volume. Before each timing,
the linux repository was removed (or checked out back to its previous
state), and `sync && sysctl vm.drop_caches=3` was executed.
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use multiple worker processes to distribute the queued entries and call
write_pc_item() in parallel for them. The items are distributed
uniformly in contiguous chunks. This minimizes the chances of two
workers writing to the same directory simultaneously, which could affect
performance due to lock contention in the kernel. Work stealing (or any
other format of re-distribution) is not implemented yet.
The protocol between the main process and the workers is quite simple.
They exchange binary messages packed in pkt-line format, and use
PKT-FLUSH to mark the end of input (from both sides). The main process
starts the communication by sending N pkt-lines, each corresponding to
an item that needs to be written. These packets contain all the
necessary information to load, smudge, and write the blob associated
with each item. Then it waits for the worker to send back N pkt-lines
containing the results for each item. The resulting packet must contain:
the identification number of the item that it refers to, the status of
the operation, and the lstat() data gathered after writing the file (iff
the operation was successful).
For now, checkout always uses a hardcoded value of 2 workers, only to
demonstrate that the parallel checkout framework correctly divides and
writes the queued entries. The next patch will add user configurations
and define a more reasonable default, based on tests with the said
settings.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new interface allows us to enqueue some of the entries being
checked out to later uncompress them, apply in-process filters, and
write out the files in parallel. For now, the parallel checkout
machinery is enabled by default and there is no user configuration, but
run_parallel_checkout() just writes the queued entries in sequence
(without spawning additional workers). The next patch will actually
implement the parallelism and, later, we will make it configurable.
Note that, to avoid potential data races, not all entries are eligible
for parallel checkout. Also, paths that collide on disk (e.g.
case-sensitive paths in case-insensitive file systems), are detected by
the parallel checkout code and skipped, so that they can be safely
sequentially handled later. The collision detection works like the
following:
- If the collision was at basename (e.g. 'a/b' and 'a/B'), the framework
detects it by looking for EEXIST and EISDIR errors after an
open(O_CREAT | O_EXCL) failure.
- If the collision was at dirname (e.g. 'a/b' and 'A'), it is detected
at the has_dirs_only_path() check, which is done for the leading path
of each item in the parallel checkout queue.
Both verifications rely on the fact that, before enqueueing an entry for
parallel checkout, checkout_entry() makes sure that there is no file at
the entry's path and that its leading components are all real
directories. So, any later change in these conditions indicates that
there was a collision (either between two parallel-eligible entries or
between an eligible and an ineligible one).
After all parallel-eligible entries have been processed, the collided
(and thus, skipped) entries are sequentially fed to checkout_entry()
again. This is similar to the way the current code deals with
collisions, overwriting the previously checked out entries with the
subsequent ones. The only difference is that, since we no longer create
the files in the same order that they appear on index, we are not able
to determine which of the colliding entries will survive on disk (for
the classic code, it is always the last entry).
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document changes in -m and --diff-merges=m semantics, as well as new
--diff-merges=on option.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
New log.diffMerges configuration variable sets the format that
--diff-merges=on will be using. The default is "separate".
t4013: add the following tests for log.diffMerges config:
* Test that wrong values are denied.
* Test that the value of log.diffMerges properly affects both
--diff-merges=on and -m.
t9902: fix completion tests for log.d* to match log.diffMerges.
Added documentation for log.diffMerges.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let -m option (and --diff-merges=m) enable the default format instead
of "separate", to be able to tune it with log.diffMerges option.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split set_diff_merges() into separate parsing and execution functions,
the former to be reused for parsing of configuration values later in
the patch series.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce the notion of default diff format for merges, and the option
"on" to select it. The default format is "separate" and can't yet
be changed, so effectively "on" is just a synonym for "separate"
for now. Add corresponding test to t4013.
This is in preparation for introducing log.diffMerges configuration
option that will let --diff-merges=on to be configured to any
supported format.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up for merge-ort backend.
* ah/merge-ort-ubsan-fix:
merge-ort: only do pointer arithmetic for non-empty lists
|
|
Plug the ort merge backend throughout the rest of the system, and
start testing it as a replacement for the recursive backend.
* en/ort-readiness:
Add testing with merge-ort merge strategy
t6423: mark remaining expected failure under merge-ort as such
Revert "merge-ort: ignore the directory rename split conflict for now"
merge-recursive: add a bunch of FIXME comments documenting known bugs
merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a conflict
t: mark several submodule merging tests as fixed under merge-ort
merge-ort: implement CE_SKIP_WORKTREE handling with conflicted entries
t6428: new test for SKIP_WORKTREE handling and conflicts
merge-ort: support subtree shifting
merge-ort: let renormalization change modify/delete into clean delete
merge-ort: have ll_merge() use a special attr_index for renormalization
merge-ort: add a special minimal index just for renormalization
merge-ort: use STABLE_QSORT instead of QSORT where required
|
|
Various rename detection optimization to help "ort" merge strategy
backend.
* en/ort-perf-batch-10:
diffcore-rename: determine which relevant_sources are no longer relevant
merge-ort: record the reason that we want a rename for a file
diffcore-rename: add computation of number of unknown renames
diffcore-rename: check if we have enough renames for directories early on
diffcore-rename: only compute dir_rename_count for relevant directories
merge-ort: record the reason that we want a rename for a directory
merge-ort, diffcore-rename: tweak dirs_removed and relevant_source type
diffcore-rename: take advantage of "majority rules" to skip more renames
|
|
Aliased command lookup accesses the `list` variable before it has been
set, causing an error in "nounset" mode. Initialize to an empty string
to avoid that.
$ git nonexistent-command <Tab>bash: list: unbound variable
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a remote has the skipFetchAll setting enabled, then that remote is
not intended for frequent fetching. It makes sense to not fetch that
data during the 'prefetch' maintenance task. Skip that remote in the
iteration without error. The skip_default_update member is initialized
in remote.c:handle_config() as part of initializing the 'struct remote'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'prefetch' maintenance task previously forced the following refspec
for each remote:
+refs/heads/*:refs/prefetch/<remote>/*
If a user has specified a more strict refspec for the remote, then this
prefetch task downloads more objects than necessary.
The previous change introduced the '--prefetch' option to 'git fetch'
which manipulates the remote's refspec to place all resulting refs into
refs/prefetch/, with further partitioning based on the destinations of
those refspecs.
Update the documentation to be more generic about the destination refs.
Do not mention custom refspecs explicitly, as that does not need to be
highlighted in this documentation. The important part of placing refs in
refs/prefetch/ remains.
Reported-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --prefetch option will be used by the 'prefetch' maintenance task
instead of sending refspecs explicitly across the command-line. The
intention is to modify the refspec to place all results in
refs/prefetch/ instead of anywhere else.
Create helper method filter_prefetch_refspec() to modify a given refspec
to fit the rules expected of the prefetch task:
* Negative refspecs are preserved.
* Refspecs without a destination are removed.
* Refspecs whose source starts with "refs/tags/" are removed.
* Other refspecs are placed within "refs/prefetch/".
Finally, we add the 'force' option to ensure that prefetch refs are
replaced as necessary.
There are some interesting cases that are worth testing.
An earlier version of this change dropped the "i--" from the loop that
deletes a refspec item and shifts the remaining entries down. This
allowed some refspecs to not be modified. The subtle part about the
first --prefetch test is that the "refs/tags/*" refspec appears directly
before the "refs/heads/bogus/*" refspec. Without that "i--", this
ordering would remove the "refs/tags/*" refspec and leave the last one
unmodified, placing the result in "refs/heads/*".
It is possible to have an empty refspec. This is typically the case for
remotes other than the origin, where users want to fetch a specific tag
or branch. To correctly test this case, we need to further remove the
upstream remote for the local branch. Thus, we are testing a refspec
that will be deleted, leaving nothing to fetch.
Helped-by: Tom Saeger <tom.saeger@oracle.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apparently this is not supported with Microsoft's Universal C Runtime.
So let's not actually do that.
Instead, just return success because we _know_ that we expect the `NUL`
device to be present.
Side note: it is possible to turn off the "Null device driver" and
thereby disable `NUL`. Too many things are broken if this driver is
disabled, therefore it is not worth bothering to try to detect its
presence when `access()` is called.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On write() errors, packet_write() dies with the same error message that
is already printed by its callee, packet_write_gently(). This produces
an unnecessarily verbose and repetitive output:
error: packet write failed
fatal: packet write failed: <strerror() message>
In addition to that, packet_write_gently() does not always fulfill its
caller expectation that errno will be properly set before a non-zero
return. In particular, that is not the case for a "data exceeds max
packet size" error. So, in this case, packet_write() will call
die_errno() and print an strerror(errno) message that might be totally
unrelated to the actual error.
Fix both those issues by turning packet_write() and
packet_write_gently() into wrappers to a common lower level function
that doesn't print the error message, but instead returns it on a buffer
for the caller to die() or error() as appropriate.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git apply" now takes "--3way" and "--cached" at the same time, and
work and record results only in the index.
* jz/apply-3way-cached:
git-apply: allow simultaneous --cached and --3way options
|