| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* rs/optim-text-wrap:
utf8.c: speculatively assume utf-8 in strbuf_add_wrapped_text()
utf8.c: remove strbuf_write()
utf8.c: remove print_spaces()
utf8.c: remove print_wrapped_text()
|
|
* tr/maint-cherry-pick-list:
cherry_pick_list: quit early if one side is empty
|
|
* cc/maint-bisect-paths:
bisect: error out when passing bad path parameters
|
|
* maint-1.6.5:
Remove extra '-' from git-am(1)
|
|
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported by Mark Lodato, "git bisect", when it was started with
path parameters that match no commit was kind of working without
taking account of path parameters and was reporting something like:
Bisecting: -1 revisions left to test after this (roughly 0 steps)
It is more correct and safer to just error out in this case, before
displaying the revisions left, so this patch does just that.
Note that this bug is very old, it exists at least since v1.5.5.
And it is possible to detect that case earlier in the bisect
algorithm, but it is not clear that it would be an improvement to
error out earlier, on the contrary it may change the behavior of
"git rev-list --bisect-all" for example, which is currently correct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is required on Windows because git-notes is now a built-in
rather than a shell script.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --cherry-pick logic starts by counting the commits on each side,
so that it can filter away commits on the bigger one. However, so
far it missed an opportunity for optimization: it doesn't need to do
any work if either side is empty.
This in particular helps the common use-case 'git rebase -i HEAD~$n':
it internally uses --cherry-pick, but since HEAD~$n is a direct
ancestor the left side is always empty.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
is_utf8() works by calling utf8_width() for each character at the
supplied location. In strbuf_add_wrapped_text(), we do that anyway
while wrapping the lines. So instead of checking the encoding
beforehand, optimistically assume that it's utf-8 and wrap along
until an invalid character is hit, and when that happens start over.
This pays off if the text consists only of valid utf-8 characters.
The following command was run against the Linux kernel repo with
git 1.7.0:
$ time git log --format='%b' v2.6.32 >/dev/null
real 0m2.679s
user 0m2.580s
sys 0m0.100s
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m4.342s
user 0m4.230s
sys 0m0.110s
And with this patch series:
$ time git log --format='%w(60,4,8)%b' >/dev/null
real 0m3.741s
user 0m3.630s
sys 0m0.110s
So the cost of wrapping is reduced to 70% in this case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The patch before the previous one made sure that all callers of
strbuf_add_wrapped_text() supply a strbuf. Replace all calls of
strbuf_write() with regular strbuf functions and remove it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch made sure that strbuf_add_wrapped_text() (and thus
strbuf_add_indented_text(), too) always get a strbuf. Make use of
this fact by adding strbuf_addchars(), a small helper that adds a
char the specified number of times to a strbuf, and use it to replace
print_spaces().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
strbuf_add_wrapped_text() is called only from print_wrapped_text()
without a strbuf (in which case it writes its results to stdout).
At its only callsite, supply a strbuf, call strbuf_add_wrapped_text()
directly and remove the wrapper function.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.5:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
|
|
If we encounter a symref that is dangling, in most cases we will warn
about it. The one exception is a dangling HEAD, as that indicates a
branch yet to be born.
However, the check in dwim_ref was not quite right. If we were fed
something like "HEAD^0" we would try to resolve "HEAD", see that it is
dangling, and then check whether the _original_ string we got was
"HEAD" (which it wasn't in this case). And that makes no sense; the
dangling thing we found was not "HEAD^0" but rather "HEAD".
Fixing this squelches a scary warning from "submodule summary HEAD" (and
consequently "git status" with status.submodulesummary set) in an empty
repo, as the submodule script calls "git rev-parse -q --verify HEAD^0".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git stash pop' option parsing used to remove the first argument
in --index mode. At the time this was implemented, this first
argument was always --index. However, since the invention of the -q
option in fcdd0e9 (stash: teach quiet option, 2009-06-17) you can
cause an internal invocation of
git stash drop --index
by running
git stash pop -q --index
which then of course fails because drop doesn't know --index.
To handle this, instead let 'git stash apply' decide what the future
argument to 'drop' should be.
Warning: this means that 'git stash apply' must parse all options that
'drop' can take, and deal with them in the same way. This is
currently true for its only option -q.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The return value from fopen wasn't being checked.
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Of course, these are changes since 1.6.6.1; changes since 1.6.6.2
would have been nil.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not double-backslash we forbid; backslashes are forbidden since
a4c2e699 (Disallow '\' in ref names, 2009-05-08)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running filter-branch with --prune-empty and --commit-filter reports:
"Cannot set --prune-empty and --filter-commit at the same time".
Change it to use the correct option name: --commit-filter
Signed-off-by: Jacob Helwig <jacob.helwig@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.5:
t8003: check exit code of command and error message separately
|
|
Shell reports exit status only from the most downstream command
in a pipeline. In these tests, we want to make sure that the
command fails in a controlled way, and produces a correct error
message.
This issue was known by Jay who submitted the patch, and also was
pointed out by Hannes during the review process, but I forgot to
fix it up before applying. Sorry about that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/maint-fast-import-large-blob:
fast-import: Stream very large blobs directly to pack
|
|
* gp/maint-cvsserver:
git-cvsserver: allow regex metacharacters in CVSROOT
|
|
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
|
|
* il/maint-xmallocz:
Fix integer overflow in unpack_compressed_entry()
Fix integer overflow in unpack_sha1_rest()
Fix integer overflow in patch_delta()
Add xmallocz()
|
|
* jh/maint-config-file-prefix:
builtin-config: Fix crash when using "-f <relative path>" from non-root dir
|
|
* nd/include-termios-for-osol:
Add missing #include to support TIOCGWINSZ on Solaris
|
|
* jc/maint-1.6.1-checkout-m-custom-merge:
checkout -m path: fix recreating conflicts
Conflicts:
t/t7201-co.sh
|
|
* rs/maint-archive-match-pathspec:
archive: complain about path specs that don't match anything
|
|
The last item in the enumerated refname rule was mistakenly made into
a sub-item of the 7th one. It should be the 8th one in the list on its
own.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.5:
blame: prevent a segv when -L given start > EOF
|
|
blame would segv if given -L <lineno> with <lineno> past the end of the file.
While we're fixing the bug, add test cases for an invalid <start> when called
as -L <start>,<end> or -L<start>.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-push-doc-status:
git-push: document all the status flags used in the output
|
|
We didn't talk about '-' (deletion), '*' (addition), nor '+' (forced).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-imap-config-parse:
Fix parsing of imap.preformattedHTML and imap.sslverify
|
|
These two variables are boolean and can lack "= value" in the
configuration file. Do not reject such input early in the
parser callback function.
Also the key are downcased before being given to the callback,
so we should run strcmp() with keyword spelled in all-lowercase.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-doc-git-add-example:
git-add documentation: Fix shell quoting example
|
|
When 921177f (Documentation: improve "add", "pull" and "format-patch"
examples, 2008-05-07) converted this from enumeration header to displayed
text, it failed to adjust for the AsciiDoc's rule to quote backslashes.
In displayed text, backslash is shown verbatim, while in enumeration
header, we need to double it.
We have a similar construct in git-rm.txt documentation, and need to be
careful when somebody wants to update it to match the style of the "git
add" example.
Noticed by: Greg Bacon <gbacon@dbresearch.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to guess an output archive's format consumed any --format
options and built a new one. Jonathan noticed that it does so in an
unsafe way, risking to overflow the static buffer fmt_opt.
Change the code to keep the existing --format options intact and to only
add a new one if a format could be guessed based on the output file name.
The new option is added as the first one, allowing the existing ones to
overrule it, i.e. explicit --format options given on the command line win
over format guesses, as before.
To simplify the code further, format_from_name() is changed to return the
full --format option, thus no potentially dangerous sprintf() calls are
needed any more.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '--full' option to git fsck does two things:
1) Check objects in packs
2) Check alternate objects
This is documented in the git fsck manual; this patch reflects that in
the short git fsck option help message as well.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-limit-note-output:
Fix "log --oneline" not to show notes
Fix "log" family not to be too agressive about showing notes
|
|
If a blob is larger than the configured big-file-threshold, instead
of reading it into a single buffer obtained from malloc, stream it
onto the end of the current pack file. Streaming the larger objects
into the pack avoids the 4+ GiB memory footprint that occurs when
fast-import is processing 2+ GiB blobs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/maint-octopus:
octopus: remove dead code
octopus: reenable fast-forward merges
octopus: make merge process simpler to follow
|
|
* bg/maint-add-all-doc:
git-rm doc: Describe how to sync index & work tree
git-add/rm doc: Consistently back-quote
Documentation: 'git add -A' can remove files
|
|
* maint-1.6.5:
fix memcpy of overlapping area
|
|
Caught by valgrind in t5500, but it is pretty obvious from
reading the code that this is shifting elements of an array
to the left, which needs memmove.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commits a2d725b7 (Use an external program to implement fetching
with curl, 2009-08-05) and c9e388bb (Make the
"traditionally-supported" URLs a special case, 2009-09-03) remote
transport helpers like 'remote-ftp' and 'remote-curl' are offered by the
completion script as available subcommands. Not good, since they are
helpers, therefore should not be offered, so filter them out.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Michal Sojka
Christian Couder
Johannes Sixt
Thomas Rast
René Scharfe
Jeff King
Larry D'Anna
Pete Harlan
Jacob Helwig
Jay Soffian
Wesley J. Landaker
Shawn O. Pearce
SZEDER Gábor