| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The command line parser of "git blame" is prepared to take an
ancient odd argument order "blame <path> <rev>" in addition to the
usual "blame [<rev>] <path>". It has at least two negative
ramifications:
- In order to tell these two apart, it checks if the last command
line argument names a path in the working tree, using
file_exists(). However, "blame <rev> <path>" is a request to
explain each and every line in the contents of <path> stored in
revision <rev> and does not need to have a working tree version
of the file. A check with file_exists() is simply wrong.
- To coerce that mistaken file_exists() check to work, the code
calls setup_work_tree() before doing so, because the path it has
is relative to the top-level of the project tree. However,
"blame <rev> <path>" MUST be usable even in a bare repository,
and there is no reason for letting setup_work_tree() complain
and die with "This operation must be run in a work tree".
To correct the former, switch to check if the last token is a
revision (and if so, parse arguments using "blame <path> <rev>"
rule). Correct the latter by getting rid of setup_work_tree() and
file_exists() check--the only case the call to this function matters
is when we are running "blame <path>" (i.e. no starting revision and
asking to blame the working tree file at <path>, digging through the
HEAD revision), but there is a call in setup_scoreboard() just
before it calls fake_working_tree_commit().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add -p" was taught to ignore local changes to submodules as
they do not interfere with the partial addition of regular changes
anyway.
* nd/add-i-ignore-submodules:
add--interactive: ignore submodule changes except HEAD
|
|
Instead of maintaining home-grown email address parsing code, ship
a copy of reasonably recent Mail::Address to be used as a fallback
in 'git send-email' when the platform lacks it.
* mm/send-email-fallback-to-local-mail-address:
send-email: add test for Linux's get_maintainer.pl
perl/Git: remove now useless email-address parsing code
send-email: add and use a local copy of Mail::Address
|
|
Doc update.
* ab/doc-cat-file-e-still-shows-errors:
cat-file doc: document that -e will return some output
|
|
Doc update.
* as/read-tree-prefix-doc-fix:
doc/read-tree: remove obsolete remark
|
|
Fix for a commented-out code to adjust it to a rather old API change.
* ys/bisect-object-id-missing-conversion-fix:
bisect: debug: convert struct object to object_id
|
|
"git stash -- <pathspec>" incorrectly blew away untracked files in
the directory that matched the pathspec, which has been corrected.
* tg/stash-with-pathspec-fix:
stash: don't delete untracked files that match pathspec
|
|
When resetting the working tree files recursively, the working tree
of submodules are now also reset to match.
* sb/submodule-update-reset-fix:
submodule: submodule_move_head omits old argument in forced case
unpack-trees: oneway_merge to update submodules
t/lib-submodule-update.sh: fix test ignoring ignored files in submodules
t/lib-submodule-update.sh: clarify test
|
|
Code clean-up.
* bw/oidmap-autoinit:
oidmap: ensure map is initialized
|
|
"git commit --fixup" did not allow "-m<message>" option to be used
at the same time; allow it to annotate resulting commit with more
text.
* ab/commit-m-with-fixup:
commit: add support for --fixup <commit> -m"<extra message>"
commit doc: document that -c, -C, -F and --fixup with -m error
|
|
"perf" test output can be sent to codespeed server.
* cc/codespeed:
perf/run: read GIT_PERF_REPO_NAME from perf.repoName
perf/run: learn to send output to codespeed server
perf/run: learn about perf.codespeedOutput
perf/run: add conf_opts argument to get_var_from_env_or_config()
perf/aggregate: implement codespeed JSON output
perf/aggregate: refactor printing results
perf/aggregate: fix checking ENV{GIT_PERF_SUBSECTION}
|
|
More perf tests for threaded grep
* ab/perf-grep-threads:
perf: amend the grep tests to test grep.threads
|
|
"diff" family of commands learned "--find-object=<object-id>" option
to limit the findings to changes that involve the named object.
* sb/diff-blobfind-pickaxe:
diff: use HAS_MULTI_BITS instead of counting bits manually
diff: properly error out when combining multiple pickaxe options
diffcore: add a pickaxe option to find a specific blob
diff: introduce DIFF_PICKAXE_KINDS_MASK
diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bit
diff.h: make pickaxe_opts an unsigned bit field
|
|
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
|
|
"git merge -Xours/-Xtheirs" learned to use our/their version when
resolving a conflicting updates to a symbolic link.
* jc/merge-symlink-ours-theirs:
merge: teach -Xours/-Xtheirs to symbolic link merge
|
|
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
|
|
"git svn dcommit" did not take into account the fact that a
svn+ssh:// URL with a username@ (typically used for pushing) refers
to the same SVN repository without the username@ and failed when
svn.pushmergeinfo option is set.
* jm/svn-pushmergeinfo-fix:
git-svn: fix svn.pushmergeinfo handling of svn+ssh usernames.
|
|
"git status" after moving a path in the working tree (hence making
it appear "removed") and then adding with the -N option (hence
making that appear "added") detected it as a rename, but did not
report the old and new pathnames correctly.
* nd/ita-wt-renames-in-status:
wt-status.c: handle worktree renames
wt-status.c: rename rename-related fields in wt_status_change_data
wt-status.c: catch unhandled diff status codes
wt-status.c: coding style fix
Use DIFF_DETECT_RENAME for detect_rename assignments
t2203: test status output with porcelain v2 format
|
|
An old regression in "git describe --all $annotated_tag^0" has been
fixed.
* dk/describe-all-output-fix:
describe: prepend "tags/" when describing tags with embedded name
|
|
* maint:
Git 2.16.1
t5601-clone: test case-conflicting files on case-insensitive filesystem
repository: pre-initialize hash algo pointer
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bc/hash-algo:
t5601-clone: test case-conflicting files on case-insensitive filesystem
repository: pre-initialize hash algo pointer
|
|
A recently introduced regression caused a segfault at clone time on
case-insensitive filesystems when filenames differing only in case are
present. This bug has already been fixed (repository: pre-initialize
hash algo pointer, 2018-01-18), but it's not the first time similar
problems have arisen. Therefore, introduce a test to catch this case and
protect against future regressions.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are various git subcommands (among them, clone) which don't set up
the repository (that is, they lack RUN_SETUP or RUN_SETUP_GENTLY) but
end up needing to have information about the hash algorithm in use.
Because the hash algorithm is part of struct repository and it's only
initialized in repository setup, we can end up dereferencing a NULL
pointer in some cases if we call one of these subcommands and look up
the empty blob or empty tree values.
A "git clone" of a project that has two paths that differ only in
case suffers from this if it is run on a case insensitive platform.
When the command attempts to check out one of these two paths after
checking out the other one, the checkout codepath needs to see if
the version that is already on the filesystem (which should not
happen if the FS were case sensitive) is dirty, and it needs to
exercise the hashing code at that point.
In the future, we can add a command line option for this or read it
from the configuration, but until we're ready to expose that
functionality to the user, simply initialize the repository
structure to use the current hash algorithm, SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n for Git 2.16.0 round 2
* tag 'l10n-2.16.0-rnd2' of git://github.com/git-l10n/git-po: (24 commits)
l10n: de.po: translate 72 new messages
l10n: de.po: improve messages when a branch starts to track another ref
l10n: bg.po: Updated Bulgarian translation (3288t)
l10n: TEAMS: add zh_CN team members
l10n: zh_CN: for git v2.16.0 l10n round 2
l10n: sv.po: Update Swedish translation (3288t0f0u)
l10n: ru.po: update Russian translation
l10n: TEAMS: Add ko team members
l10n: ko.po: Update Korean translation
l10n: fr.po 2.16 round 2
l10n: es.po: Spanish translation 2.16.0 round 2
l10n: vi.po(3288t): Updated Vietnamese translation for v2.16.0 round 2
l10n: git.pot: v2.16.0 round 2 (8 new, 4 removed)
l10n: es.po: Update Spanish Translation v2.16.0
l10n: fr.po v2.16.0 round 1
l10n: bg.po: Updated Bulgarian translation (3284t)
l10n: sv.po: Update Swedish translation (3284t0f0u)
l10n: fr.po: "worktree list" mistranslated as prune
l10n: git.pot: v2.16.0 round 1 (64 new, 25 removed)
l10n: fixes to German translation
...
|
|
For 'add -i' and 'add -p', the only action we can take on a dirty
submodule entry is update the index with a new value from its HEAD. The
content changes inside (from its own index, untracked files...) do not
matter, at least until 'git add -i' learns about launching a new
interactive add session inside a submodule.
Ignore all other submodules changes except HEAD. This reduces the number
of entries the user has to check through in 'git add -i', and the number
of 'no' they have to answer to 'git add -p' when dirty submodules are
present.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Translate 72 new messages came from git.pot update in 18a907225 (l10n:
git.pot: v2.16.0 round 1 (64 new, 25 removed)) and 005c62fe4 (l10n:
git.pot: v2.16.0 round 2 (8 new, 4 removed)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix for a topic already in 'master'.
* jh/object-filtering:
oidset: don't return value from oidset_init
|
|
Doc hotfix.
* tg/worktree-create-tracking:
Documentation/git-worktree.txt: add missing `
|
|
Hot fix to a test.
* js/test-with-ws-in-path:
t3900: add some more quotes
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The -e option added in 7950571ad7 ("A few more options for
git-cat-file", 2005-12-03) has always errored out with message on
stderr saying that the provided object is malformed, like this:
$ git cat-file -e malformed; echo $?
fatal: Not a valid object name malformed
128
A reader of this documentation may be misled into thinking that
if ! git cat-file -e "$object" [...]
as opposed to:
if ! git cat-file -e "$object" 2>/dev/null [...]
is sufficient to implement a truly silent test that checks whether
some arbitrary $object string was both valid, and pointed to an
object that exists.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 89a70b80 ("t0302 & t3900: add forgotten quotes", 2018-01-03), quotes
were added to protect against spaces in $HOME. In the test_when_finished
command, two files are deleted which must be quoted individually.
[jc: with \$HOME in the test_when_finished command quoted, as
pointed out by j6t].
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/perl-path-workaround-in-tests:
mingw: handle GITPERLLIB in t0021 in a Windows-compatible way
|
|
"git merge -s recursive" did not correctly abort when the index is
dirty, if the merged tree happened to be the same as the current
HEAD, which has been fixed.
* ew/empty-merge-with-dirty-index:
merge-recursive: do not look at the index during recursive merge
|
|
A hotfix for a recent update that broke 'git bisect'.
* ma/bisect-leakfix:
bisect: fix a regression causing a segfault
|
|
"git rebase -p -X<option>" did not propagate the option properly
down to underlying merge strategy backend.
* js/fix-merge-arg-quoting-in-rebase-p:
rebase -p: fix quoting when calling `git merge`
|
|
Git's assumption that all path lists are colon-separated is not only
wrong on Windows, it is not even an assumption that is compatible with
POSIX.
In the interest of time, let's not try to fix this properly but simply
work around the obvious breakage on Windows, where the MSYS2 Bash used
by Git for Windows to interpret the Git's Unix shell scripts will
automagically convert path lists in the environment to
semicolon-separated lists of Windows paths (with drive letter and the
corresponding colon and all that jazz).
In other words, we simply look whether there is a semicolon in
GITPERLLIB and split by semicolons if found instead of colons. This is
not fool-proof, of course, as the path list could consist of a single
path. But that is not the case in Git for Windows' test suite, there are
always two paths in GITPERLLIB.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add Fangyi Zhou to zh_CN l10n team members.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Translate 72 messages (3288t0f0u) for git v2.16.0-rc1.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: 依云 <lilydjwg@gmail.com>
Reviewed-by: Fangyi Zhou <fangyi.zhou@yuriko.moe>
|
|
* 'master' of git://github.com/nafmo/git-l10n-sv:
l10n: sv.po: Update Swedish translation (3288t0f0u)
|
|
* 'russian-l10n' of https://github.com/DJm00n/git-po-ru:
l10n: ru.po: update Russian translation
|
Junio C Hamano
Eric Sunshine
brian m. carlson
Nguyễn Thái Ngọc Duy
Ralf Thielow
SZEDER Gábor
Alexander Shopov
Ævar Arnfjörð Bjarmason
Beat Bolli
Johannes Schindelin
Jiang Xin